Is Symantec Critical System Protection (CSP) compatible with UCCE 8.5

Does any one know if Symantec Critical System Protection (CSP) compatible with UCCE 8.5 (CVP, HDS, RGR, and PG)?

Hi Anand,
For UCCE the information on third party software is checked in Bill of Materials guide and not in comp matrix.
Curtis,
Please check the BOM for UCCE 8.5
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/icm_enterprise/icm_enterprise_8_5/reference/guide/icm85_bom.pdf?referring_site=bodynav
If the guide specficaly states about the software it means that it has been tested and will be supported. If not it implies that the software has not been tested.
Thank you
Anuj

Similar Messages

  • Florida virtual school system is only compatible with Safari versions 4.0 and 5.0, where can I down load these?

    Florida virtual school system is only compatible with Safari versions 4.0 and 5.0, where can I down load these?

    Safari 4 was for Tiger 10.4.11, and Safari 5 for Leopard. Neither will work on a system running Mountain Lion.
    Surprising that they have never updated their system!

  • What operating system smartphone is compatible with Adobe Flash Player?

    What operating system smartphone is compatible with Adobe Flash Player?

    Hello,
    Flash Player is no longer supported on mobile devices.  With that said, you can manually install the last supported version of Flash Player for Android devices using the instructions here "Why can't I install Flash Player on my Tablet?" (Kindle or Samsung Galaxy). Do note that this is very old and has not been updated with any security fixes.  This FAQ offers some alternatives to Flash Player on Android devices.
    Maria

  • My Mac's operating system no longer compatible with my Deskjet 3050A

    Hi,
    I haven't used my printer in a while because it hasn't been working. But I'm tired of running to my neighborhood FedEx Office so am tackling this issue today.
    I went to install the HP software on my MacBook Air and was told "installer not compatible with the version of the operating system on your computer. It is compatible only with 10.6 and below."
    My Mac is running OSX, version 10.9.5. Is there anyway to make the printer compatible?
    Thanks for your help!

    Hi @kbaostrem 
    A full feature driver for Mavericks is not available for your printer, either from the CD that shipped with your printer or from the HP website. This document applies to HP printers supported in Mac OS X versions 10.6 (Snow Leopard), 10.7 (Lion), 10.8 (Mountain Lion), 10.9 (Mavericks), and 10.10 (Yosemite) that only have drivers available through Apple Software Update.
    If you would like, I can help you put the printer on your wireless network without software. I use this method for iPads, iPhones and other devices that do not have software.
    Restore the network defaults on the printer by pushing the wireless button, going to settings, and then restore defaults. The wireless button should then start flashing, this means it is now in autowireless mode.
    Connect to the network that the printer is broadcasting. It is usually HP-setup-3050a and then part of the MAC address. The wireless light will still be flashing on the printer at this point, this is normal since this is not an actual adhoc connection.
    Load up the Embedded Web Server (EWS) in the browser on your mobile device. The default IP for autowireless is 192.168.223.1.
    Go to the network tab along the top of the EWS.
    Click on Wireless Setup Wizard along the lefthand side to begin configuring the printer.
    You have now completed the Wireless configuration, follow the next 3 steps to start printing.
    The blue wireless light will go solid, put the Mac back on your own network.
    Add the printer to the System Preferences.
    Print
    Please let me know if this resolves the issue. I look forward to hear from you.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Plug in for Garmin GPS system is not compatible with FireFox 5.0?

    ''locking as a duplicate of this - https://support.mozilla.com/en-US/questions/851653''
    I have updated FireFox plugins today. I have cleared download history. I have set up folder for downloads. Every time I go to Garmin and try to download to get current map updates a message comes up "Garmin Communicator could not be installed because it is not compatible with FireFox 5.0?

    Did you receive my first message?

  • Mac System 10.9 compatiblity with CS Pro. 5.5

    Wondering if this upgrade will be compatible with my software. Just contact Adobe and they have not tested this yet. Anybody have any insight?

    Not supported as far as I know which doesn’t mean it won’t work. What it means is that you’re on your own.
    I cannot stress strongly enough that you do not do in place upgrade. If you think Mavericks is compelling enough to take the chance, back up your data and wipe out the harddrive and do a clean install.

  • My Laptop operating system isn't compatible with the sortware...HELP

    I'm using my old PC Laptop which uses Windows Vista operating system....how can i download the free trial pacakages??

    you should be able to download without problem.  installing you can only do with programs compatibile with your os.
    either use old software or upgrade your os.

  • New billing system webpage non-compatible with Safari.  Please help!

    Hey guys. A large corporation that is a customer of my father's is switching all of their billing process to a system called Powertrack. Unfortunately their specific webpage is written only for Microsoft Internet Explorer. I tried downloading the latest version of Firefox (v 3.0.6) and running the url there. Again, no luck. The url is https://www.powertrack.com/usbank. If anyone has any suggestions on what we can do to make this work is would be of the greatest help. Thank you.
    Garet

    Garet –
    You basically have two options –
    1. Run Windows XP on a virtual system on your Mac using Bootcamp or Parallels (www.parallels.com) – doing this would allow you to access the site within your XP Session. However; this would require the purchase of the virtual software and Windows XP Professional (assuming you can still find it).
    2. Run Crossover (www.codeweavers.com) – this installs a ‘shell’ version of Windows which does include Internet Explorer though I can’t remember what version it is (IE 5?) that may work with the site.
    Hopes this helps –
    BH

  • HP IPAQ NAVIGATION SYSTEM is it compatible with No...

    Hey all, i've recently managed to get a good deal for the HP IPAQ Navigation System (GPS Receiver), but Im not sure if it will work with my Nokia E51. On top of that, Mapking is included but i can't seem to install mapking since it states that I need Windows CE which obviously the E51 doesn't run on it. I need some advice on this.

    If the HP GPS receiver works like a regular Bluetooth GPS receiver, then you can most likely use it with Nokia Maps or other software that can use a an external Bluetooth GPS receiver (TomTom, Navicore, Wayfinder, Route66, Google Maps, etc.).
    If the Maping is for Windows CE (Windows Mobile), then it is useless to you unless you also have a Windows Mobile based device which to run it on.

  • Stereo System compatible with Incredible

    I want to get a home stereo system that's compatible with the Incredible. Is there one on the market that has a dock for me to place my Incredible in, and stream music from the device? Been trying to research, but can't find any...

    i am not aware of any and unfortunately, the htc inc does not have hdmi. your best bet is to get a stereo with a 3.5mm auxillary input. then you just use an 3.5mm auxillary cord and plug it into the headphone jack on the phone and into the input in the stereo. i do this in my car and it works pretty well.

  • It seems outrageous to many of us that Firefox 4.0 would no longer be backwards compatible with at least one previous OS such as Tiger!

    When I first attempted to upgrade to 4.0 on my workstations that still use Tiger, I get a message saying that “the current system is not compatible with the new version of Firefox”.
    So why force people to upgrade their OS, before they can upgrade their browser?
    And how can I send you any feedback (besides this email) if I need to have 4.0 to be able to even write to you?
    Why don’t you provide an email address along with your physical address, so people can reach you whether or not they have
    the current version of Firefox???
    I won’t upgrade my Operating System until I am ready, not because Firefox says so.
    [email protected]
    Digital Imaging Technician
    Warner Bros. Studios Photo Lab

    When I first attempted to upgrade to 4.0 on my workstations that still use Tiger, I get a message saying that “the current system is not compatible with the new version of Firefox”.
    So why force people to upgrade their OS, before they can upgrade their browser?
    And how can I send you any feedback (besides this email) if I need to have 4.0 to be able to even write to you?
    Why don’t you provide an email address along with your physical address, so people can reach you whether or not they have
    the current version of Firefox???
    I won’t upgrade my Operating System until I am ready, not because Firefox says so.
    [email protected]
    Digital Imaging Technician
    Warner Bros. Studios Photo Lab

  • What is the most recent version of Firefox which is compatible with a PowerMac G5 (PPC) running OS X 10.5.8?

    Running Firefox 3.6.3 on my aging machine, I got a dialog telling me that I should upgrade. I did. When the update was complete, and the application restarted, I was running Firefox 3.6.24, and shown a page saying:
    “Thanks for downloading Firefox, but this version is out of date. Unfortunately your computer's operating system isn't compatible with the most current Firefox learn more, but you are encouraged to download the most recent version that is compatible instead.”
    Clicking the link to the “most recent version” took me to a page which said:
    “Firefox 3.6.x will be maintained with security and stability updates for a short amount of time. All users are strongly encouraged to upgrade to the latest version of Firefox.”
    There was no other suggested version linked to that page, and the latest version of Firefox is, of course, NOT compatible with my machine.
    Mozilla is confusing me here. Why did Firefox drop back within v. 3.6.x from the version I was already running? Why does the site suggest upgrading to an apparently non-existent “latest compatible version” without providing a link to its suggestion?

    Other browsers that you can look at:
    * Camino: http://caminobrowser.org/download/releases/
    * [http://en.wikipedia.org/wiki/ICab iCab]: http://www.icab.de/dl.php
    * SeaMonkey: http://www.seamonkey-project.org/releases/seamonkey1.1.19

  • I have OS X 10.7.4 & my iMac is from May '07 but it's NOT compatible with Mountain Lion???

    The App Store gives me the message that my system is not compatible with Mountain Lion.
    Is my iMac THAT old that is it really isn't compatible for downloading Mountain Lion??  I bought it in May '07.  I have OS X 10.7.4 installed.
    So confused.. help please someone..

    Macs that can be upgraded to OS X Mountain Lion
    iMac (Mid 2007 or newer)
    MacBook (Late 2008 Aluminum, or Early 2009 or newer)
    MacBook Pro (Mid/Late 2007 or newer)
    MacBook Air (Late 2008 or newer)
    Mac mini (Early 2009 or newer)
    Mac Pro (Early 2008 or newer)
    Xserve (Early 2009)

  • Does anyone know if the Sony JamBox RDHGTK33IP 420W is compatible with the ipod nano 7th generation?

    It doesn't say so on the box, just the ipod nano 6th and earlier. I am hoping someone already tried using the 7th and has an answer.

    Hello Jay,
    Welcome to the Sony Community.
    The Sony RDH-GTK33iP Home Audio Docking System is not compatible with iPod Nano 7th generation.
    Thank you for your post.

  • Installing EIM/WIM 4.3(2) with UCCE 7.5

    I am looking to install EIM/WIM for a customer with an exisiting UCCE 7.5 installation. Would really like to installed EIM/WIM 4.3(2) as it has support for IE 8. But...
    According to Cisco Unified Contact Center Enterprise (Unified CCE) Software Compatibility Guide only version 4.3(1) is compatible with UCCE 7.5.
    It seems that UCCE 8.0 is the only version that is compatible with 4.3(2).
    Has anyone tried EIM/WIM 4.3(2) with UCCE 7.5?
    Thanks,
    Richard

    However given time and cost constraints for the project, unfortunately we might have to go with 4.3(1) and consider a upgrade later.
    In that case, you can apply ES4 (going from memory, so I hope this is the right ES) to 4.3(1) as this supports agents using IE8. That was its main purpose because there was a little delay in bringing out SR2 and customers wanted the IE8 support. That said, SR2 has a host of bug fixes. SR2 will complain if someone on IE6 tries to use the Agent Desktop, while ES4 will not,
    Regards,
    Geoff

Maybe you are looking for

  • Call a PAL function within a view in HANA?

    Hi community! Does anyone know how you can integrate the call of a PAL function (e.g tripple exponential smoothing) into a HANA view?  I guess this must be achievable in a CE Script? Business scenario: we would like to show a time series based predic

  • Restore from TM backup onto new internal HD

    I apologize if this is a redundant post. Okay, I just upgraded my internal HD from 160 gb to 1 tb. Awesome right? So here's my problem. Booting from my Snow Leopard install disk, I successfully erased and formatted the new drive to Mac OS X extended

  • Message No.: ME160

    All SAP Gurus, I want to convert Message no. ME160 from Warning to Error. But I'm unable to loacte/find it in SPRO. Can anyone please help me out? Regards,

  • How can I fix snapping?

    I was using the pen tool today to draw in perspective and It was snapping correctly but suddenly it's not snapping anymore. When I press A to select my path selection tool I can move the whole path and it snaps to guides, but when I pess Ctrl and cli

  • Where can I download Premier and Photoshop Elements 10.0?  Or can I use my old serial numbers for the new versions?

    I have changed computers since purchasing these programs in 2012 and want to install them on my new machine.