Is T code OOHAP_BASIC in Performanace management system(PMS) available in IMG Node ?

Hi,
Is T code OOHAP_BASIC in Performanace management system(PMS) available in IMG Node ?
please revert . I am not able to find the same in IMG.
Thanks
Srikant .

SPRO->Personnel Management->Personnel Development->Appraisal Systems->Edit Appraisals Catalog

Similar Messages

Package Management System(PMS) in Solaris 10 ?

Is there an effort to improve P.M.S. in solaris 10 ?

Sorry, hit the entery key too soon.
Dtrace,zone etc are all cool stuff. but I like to see the PMS got imporved.
Sun's pkgadd is an ok PMS but it can be better. The biggest problem I see is the lack of package dependency install/remove and package depot support.
HPUX's SD-UX allow us to install apache package and its depended packages like openldap,berkely db etc automatically. all happend with just one command.
tj

Managed system Configuration : The JMX metrics of this Host / Byte Code Adapter are missing

Hi Friends
While Configuring EP system with SOLMAN 7.1 SP12 it is giving below message in self Diagnosis Phase.
1. Solman system is already having ISAGENT version 8 and 9 installed (but Managed system is having 8)
2. I have followed the automatic Process as below
==========================================
Automated Installation of the Introscope Agent via SMD
The Solution Manager provides an application that performs the setup of the Introscope
byte code agent for Java automatically. This section explains the steps to run the setup.
Before you can run the Introscope agent setup, the setup wizard for the managed system
must have been executed.
1.
2.
3.
4. Launch the Introscope Setup application: SAP Solution Manager Configuration 
Managed Systems Configuration  Step 7 Configure Automatically  Automatic
Activity “Byte Code Adapter Installation”  “Open Java URL” (only available in edit
mode). Your screen will look similar to the image below:
5. Check the Enterprise Manager Settings at the top of the screen. These are the
connection parameters that will be used by the agent to connect to the Enterprise
Manager.
6. In the pane Introscope Agent Setttings, select the system that you want to instrument
with the agent. Check “select all” and click “Retrieve Current Settings”. This will display
the current status of the agent setup.
7. To initially setup or update the agents, click Setup Introscope Agent …. This will open
the setup dialog as shown below. Select the desired agent version (by default only one
available) and choose the profile. Next, check the desired instrumentation areas, and,
in the case of AIX, review the AIX settings to match your environment (J9 or classic
mode).
8. Finally, hit Apply to perform the necessary changes in the agent configuration. Agent
config files will be adapted and the Java VM parameters will be set as required for the
managed system.
================================================================
3. Restarted SAP but error still present.
Please help to resolve the issue.
Thanks

Found the solution :
1819577 - Workload Analysis data missing for Java systems when using ISAGENT 8.2.4.0
Cause
l This issue has been identified as product defect and documented in note 1273028
Resolution
l As mentioned in note 1273028, update to ISAGENT 8.2.4 Patch 1 timestamp: 2012-06-26, please proceed as described below)
1. Enable the Maintenance Mode in the Agent Administration UI (http://solmanserver:port/smd/AgentAdmin)
2. Deploy the file to the Solution Manager JAVA stack using the Software Deployment Manager (SDM)
3. Disable the Maintenance Mode in the Agent Administration
4. Execute again the activity 'Byte Code Adapter Installation' of the step 'Configure Automatically' in the 'Managed System Configuration' for the
affected systems. This activity will deploy the new version of the
Introscope JAVA agent in the managed system servers and reconfigure the JVM parameters to use the new version of Introscope JAVA
Agent;
5. Check from Introscope Agent Admin if "IS Agent State" contains value "Running but needs restart"
6. Restart the affected managed system(s)
Finally Solution is update your SOLMAN system patch ISAGENT 8.2.4.0 from patch 0 to 1 via SDM.
Thanks
Mukesh

Not find EWA Session in the managed system

Hi all,
I am configuring SOL 7.1 for EWA.
I have configured SDCCN both on Solution manager 7.1 and Managed System.
In the solution manager, i can find EWA session for managed system.
The question is : When i run "Refresh sessions" on the T-code: SDCCN of Managed system, it can not retrive EWA session where exist on the Solution manager.
How do i do? Can someone help, please.
BR
Wu

after reconfiguration in new client,
Follow Note 727998 - Complete Replacement of Service Definitions for SDCC/SDCCN
step 1 :
in the solution manager:
1.1 run report BDL_DELETE_ALL_TABLES in SE38
1.2 SDCCN-> Goto -> Settings -> Task specific -> RFC destinations.
       Ensure that connection 'NONE' and SDCC_OSS is maintained, and that the 'master'
1.3 Execute a "service definition refresh" in SDCCN
1.4 Delete any task 'Maintenance Package' in the 'To do' tab in SDCCN.
1.5 Create a new periodic task 'Maintenance Package' in SDCCN
1.6 Call function module /BDL/_GENERATE_LOGFUNCINCLUDES in SE37
        Assign the value 'ALL' to the import parameter 'OPTION' (keep the default values for all other parameters) and execute the module.
1.7 Execute "refresh session" in SDCCN
step 2:
in the managed system:
1.1 run report BDL_DELETE_ALL_TABLES in SE38
1.2 SDCCN-> Goto -> Settings -> Task specific -> RFC destinations.
       Ensure that only connection SM_<SOL>_BACK' (delete SDCC_OSS )is maintained, and that the 'master'
1.3 Execute a "service definition refresh" in SDCCN
1.4 Delete any task 'Maintenance Package' in the 'To do' tab in SDCCN.
1.5 Create a new periodic task 'Maintenance Package' in SDCCN
1.6 Call function module /BDL/_GENERATE_LOGFUNCINCLUDES in SE37
        Assign the value 'ALL' to the import parameter 'OPTION' (keep the default values for all other parameters) and execute the module.
1.7 Execute "refresh session" in SDCCN
Best Regards,
Wu

Email response management system in crm 5.0

hi buddies,
preasently i am working on email response management system in crm 5.0 for auto routing and auto respounding of emails.can any one suggest me the document or customization steps for that
thanks in advance
manav
Edited by: manav on Mar 8, 2008 6:37 AM

Hi Madhav,
You can customise the ERMS rule modler by creating the ERMS New policy in the PCUI application (Rule modler) for the Email routing category for the default service manager profile you can go to the transaction code crmc_pcuitools and select the rule modler under which select the Email routing as category for the service manager profile to be called and can create the new polocy with node and subnodes and you can define the incoming email address as well . do mention your email id so that i can send the config steps document for the same.
pl do reward points if helpful
Regards
Dinaker vikas

I can not make a "Automated Installation of the Introscope Agent" (Managed System Configuration, p.7)

I can not make a "Byte Code Adapter Installation"
When I open meets both paragraphs in step Managed System Configuration is somewhat obscure situations that do not allow the automatic configuration Introscope agent and Introscope Manager
Please help to resolve a number of questions that might help me complete the setup :
1. Why has the status of Enterprise Manager : <No Enterprise Manager configured> ( see picture)
I set up Enterprise Manager in accordance with the installation instructions and complied with all the setting items . Since without any configuration can be associated with the appearance of this status ?
2 . Why Server Node is empty detail settings ?
JDK Location:
Enterprise Manager Host:
Enterprise Manager Port:
Introscope Agent Name:
Introscope Agent Profile:
Autoprobe Directives:
Wily Version:
Introscope Agent Version:
Introscope Agent Log Location:
3 . What a mistake ($ MC: DIAG_WILY_MSG: 032 : L), which appears when I click configuration "Configure Introscope Agent Setup ...", and what it can be linked ? ( see picture )
And the last question , which is also linked to the process of automatic configuration and refers to a phrase from the instruction (Introscope Version 9
Installation Guide For SAP July 2012) points out "Automated Installation of the Introscope Agent via SMD"
there is such an item:
2 . Deploy ISAGENTJ5 *. SCA which is the Introscope Java Agent 9 with SDM to Solution Manager. You may need to deploy also ISAGENT *. SCA which is Introscope Java Agent 8.
However, nowhere does it say where exactly ( on what the absolute path ) I must perform unloading and then what to do with this discharge

The problem was resolved a small manipulation - on stage Basic Configuration,
point 3 "Configure CA Introscope"
I forgot to add to the list of CA Introscope Enterprise Managers link to my manager.
Thus it is necessary to take into account that the path should be correct (usually for linux - /usr/sap/ccms/apmintroscope) and the directory should be applied appropriate privileges.
Then in paragraph "Byte Code Adapter Installation" - there are all the necessary data, and it starts to work correctly

Link SAP PI 7.3 to SolMan 7.1 - error during managed system configuration

All,
I installed my diagnostics agent twice with different options:
- Direct P4 connection via Java EE Dispatcher Node with port 5xx04
- P4 connection via SCS message server with port 81xx
In both cases I get an error during the managed system configuration of SAP PI 7.3: Remote error : Connection to P4 port of managed system failed.
I'm a bit confused with the step Enter System Parameters. In the Java parameters section, I can only enter port 39xx. if not, I get an error.
Also, I marked and unmarked the option concerning the ABAP user store, but the error persists.
Please advice.
Thanks a lot.

Hi Allam,
I checked the KBA and I think now, I have the correct HTTP port.
The error I now get is S:CL_DIAGSTP_MESSAGE:483
When I take the next step, Configure Automatically, I get this error during the Byte Code Adapter Installation phase when I open the Java URL stated in the navigation column:
DIAG_WILY_MSG:157:S - com.sap.smdagent.vmmanager.VMManagerP4Exception: com.sap.smdagent.plugins.connectors.p4.exceptions.P4AuthorizationException: Access is denied to SAP System sid: check the connection credentials.More details about the error in agent 'sappi' log file (SMDAgentApplication.X.log).; nested exception is:
com.sap.engine.services.security.exceptions.BaseLoginException: Error during authentication. For more information see the remote server traces.
Any idea?
Thanks.

Document Management System

i want to write a Document Management System to read the content of the MS Word file and convert it to the PDF file using java.
Does any java api can do this??
Thank You

There are a number of solutions, none of which, unfortunately, are trivial:
In decreasing scale of difficulty:
a) Hand-code the entire solution. PDF and MS DOC are both well documented formats.
I wouldnt recommend you try this.
b) Use ready-made open source libraries:
Other than the ones mentioned earlier, there is an Apache Libraray (POI ?) which can be used for reading and writing streamed OLE objects (which is what a word doc is)
c) Use the Java-Activex bridge and use mature COM/Activex components
WinWord itself is an Activex component. There are loads of mature Activex components that can spew out PDF.
d) If platform is not an issue, use C# or VB.NET
I'll probably get flamed for this.
I am not a .NET advocate usually, but in this particular case you should be able to complete your task with least effort by using mature Activex libraries and one of the .NET languages.

Document Management System(DMS)

Dear Expert,
We need to store the Employee revision letters( in PDF format) in DMS. Letters are currently in HTML format which we will convert them in to PDF format & store the same thru Document Magement System (DMS).
I would like to know,
1. How can we use DMS to store the letters in PDF format?
2. Where can I find DMS configuration part in SPRO?
3. I understand that DMS is a unique concept availabe in SAP HR. So how can I link DMS to HCM?
4. Is SAP Archive link related to DMS ?
5. Any documents/links related to this kinldy send it across.
Thanks in Advnace,
Regards,
Damodar Pai.

hi
try with this
SAP DMS - Document Management System
SAP DMS are for storing documents such as CAD drawings, Materials pictures etc.
With the document management system, users will be able to view the documents with ease within their SAP systems.
Installing the SAP DMS requires a little bit of planning on how you want to do it.
You have to give a little thoughts to stuff such as :-
1. The total numbers of documents that will be store monthly.
2. The average file size of each documents.
3. The capacity of your present R/3 system.
4. Your present network bandwidth.
5.   Document Archiving Strategy.
6.   Backup and Recovery Plan.
Additional purchasing of hardware are required, especially if you have large amount of documents to stored.
With this in mind, you can then decide on how you want to do it.
You can do this in a few ways :-
1. Import the documents into the R/3 system.
2. Use an external document server.
3. Have a dedicated PCs where all the documents are stored.
Most companies that intend to used DMS will opt for Option 2 as they does not want to overstretch the R/3 database.
Options 1 requires you to setup the conversion interface.
The conversion interface allows R/3 to automatically covert your files and import it into the R/3 database.
Here is a simple example of storing documents into your PCs, just to have a feel how the SAP DMS works:-
For those using Citrix, you have to set this at the Citrix Server where the SAPGUI is located.
Configure SM30 - V_TDWE_C1
Put this command in your autoexec.bat
SET HOSTNAME=PC1234
Restart your pc.
You can create/manage your documents in transaction code CV01N / CV02N
Assigning Documents to a Material Master Record
Access a material master record in Create or Change mode, and select Basic Data.
To create links to documents, choose Additional data -> Document data.
The Link to Documents dialog box appears.
Assign one or more documents to the material.
If you do not know what the document number is, you can search for it using the search help or by choosing Find document.
When assigning a document to a material, you have the following options:
1. Viewing the document by choosing it in the Link to Documents dialog box.
2. Viewing any originals of the document by positioning the cursor on the document and
   choosing Display originals in the Link to Documents dialog box.
To return to the Basic Data screen, choose Continue.
Save your data.
all the best
madhu

Document Management system(DMS) and PDM webclinet????

Hello.....
I am working on Document management system(CV01 and cv02)......
The requirements are.....
1) I have crated a Document Info record(CV01) and attached originals(Drawing,diagrams) to the document in SAP system.
If user reqest to open a original in SAP then it should connect to PDM WEB client and it should fetch the original from PDM server for viewing and editing the original.
How can I implemet this scenario...Should i wrire code in ABAP or Any advaced technology(BSP or PORTAL) should i sue....
Please let me know??
Thanks and regards
Preethi....

Hello.....
I am working on Document management system(CV01 and cv02)......
The requirements are.....
1) I have crated a Document Info record(CV01) and attached originals(Drawing,diagrams) to the document in SAP system.
If user reqest to open a original in SAP then it should connect to PDM WEB client and it should fetch the original from PDM server for viewing and editing the original.
How can I implemet this scenario...Should i wrire code in ABAP or Any advaced technology(BSP or PORTAL) should i sue....
Please let me know??
Thanks and regards
Preethi....

Document management system(DMS) and Webclinet??

Hello.....
I am working on Document management system(CV01 and cv02)......
The requirements are.....
1) Originals attached to the Document should be viewed and edited by the user in the webclient..???please let me know the solutions??
2) What is the webclient and In which area (abap or bsp or portal) should i code for viewing and editing the original documents??what will be the solution for this
??I am working on 4.7 version
3) Please let me know some code about this???
Thanks and Regards
Preethi....

Hello.....
I am working on Document management system(CV01 and cv02)......
The requirements are.....
1) Originals attached to the Document should be viewed and edited by the user in the webclient..???please let me know the solutions??
2) What is the webclient and In which area (abap or bsp or portal) should i code for viewing and editing the original documents??what will be the solution for this
??I am working on 4.7 version
3) Please let me know some code about this???
Thanks and Regards
Preethi....

How to upload the data to SAP-DMS(Document Management System)

Dear sir,
How to upload the data to SAP-DMS (Document Management System) please give me the code for this .ex for (excel format or tab deliminated) to sap system through BAPI i have to pass.
regards
R M Patil

Hi,
May be following link may help you.
/thread/315373 [original link is broken]
/message/205534#205534 [original link is broken]
Thanks,
Sree.

Document Management System workflow

Dear Sirs,
In document management system while doing document distribution system is creating partial order,inial order but no
distribution order.Further to that it saying
"Not yet sent to recipient
Message no. 25235
Diagnosis
No distribution has been made to the recipient.
Procedure
You cannot execute this function until the partial order has been
allocated to a distribution order package."
Pl. help me to find out the problem
Thanks and regards
Mrinmoy Chakraborty

you can do a developer level integration using iFS. Pls. check the docs for iFS to get more information. They have sample code to help u get started.
hth
satish paul
We installed Oracle Workflow Server 2.6.2. Database is Oracle 9i and the OS is Win NT.
Workflow is working fine and the notifications are reaching.
I would like to attach some documents to the workflow. How to do this? Is there anyway of doing this? As per our business needs one has to create and review the documents as the workflow progress.
-- aditya

OLE2_OBJECT AND DOCUMENT MANAGEMENT SYSTEM (DMS)

Hi Experts.
I'm trying to make a excel inform like a catalog with materials and images which are in a Document Management System.
I'm using OLE2_OBJECT to make the inform in EXCEL, because I'm trying to do it with SMARTFORMS, and I cannot because I need to resize and put ok the images and with SMARTFORMS I cannot.
To see the information I have a ALV Objects with a custom container with the information to the database..., material, price, etc..., and in other container when you click in a row I show the picture which is in the DMS.
To do it, I use this method to get the URL to the image.
CALL METHOD cl_dms_thumbnail_display=>get_url
EXPORTING
i_doc = ls_doc "IMPORTING
e_url = g_graphic_url.
And after I call the method of instance of class cl_gui_picture to show the picture in the cl_gui_alv_container
CALL METHOD g_picture1->load_picture_from_url
EXPORTING
url = p_graphic_url
IMPORTING
RESULT = p_result.
In the code to excel print to insert the picture if I put this URL to my local pc, it's ok,
CALL METHOD OF picture 'INSERT'
EXPORTING
#1 = 'C:Documents and SettingsadministradorMis documentosMis imágenesprueba.bmp'.
but the URL of the g_graphics_url it's
SAPR3://SAPR3CMS/get/200/ZAFD_5F100/DC99BBC5172158F18A14005056C00008/DSR_20DEP_202_20BANDAS_20BROWN_20389_2020070719.JPG
and this URL it's nothing if I put in the internet explorer...
What can I do to do this??
If you have another idea I appreciate it.
Thanks.

Hi,
May be try this way . ( I am not 100% sure about this)
data : g_picture   type ref to cl_gui_picture.
data : g_thumbnail type ref to cl_gui_custom_container.
CALL METHOD cl_dms_thumbnail_display=>get_url
EXPORTING
i_doc = ls_doc "IMPORTING
e_url = g_graphic_url.
if not g_graphic_url is initial.
create object g_thumbnail
      exporting container_name = <Your container name>.
create object g_picture
       exporting parent = g_thumbnail.
call method g_picture->set_display_mode.
endif.
aRs

Document Management System for sap mm point of view steps

Hi All.
Document management system for sap mm point of view steps required.
Thanks in advance for all sap mm forum members.
Regards.
Parameshwar

Hi,
Customizing settings can be collected by processes into Business Configuration Sets (BC Sets). BC Sets make Customizing more transparent by documenting and analyzing the Customizing settings. They can also be used for a group rollout, where the customizing settings are bundled by the group headquarters and passed on in a structured way to its subsidiaries.
BC Sets are provided by SAP for selected industry sectors, and customers can also create their own.
When a BC Set is created, values and combinations of values are copied from the original Customizing tables into the BC Set and can be copied into in the tables, views and view clusters in the customer system. The BC Sets are always transported into the customer system in which Customizing is performed.
Advantages of using BC Sets:
1.     Efficient group rollout.
2.     Industry sector systems are easier to create and maintain.
3.     Customizing can be performed at a business level.
4.     Change Management is quicker and safer.
5.     Upgrade is simpler.
To create BC sets follow the below step:
Choose Tools ® Customizing ® Business Configuration Sets® Maintenance in the SAP
menu, or enter the transaction code SCPR3 in the command field.
Choose Bus.Conf.Set ® Create.

Is T code OOHAP_BASIC in Performanace management system(PMS) available in IMG Node ?

Similar Messages

Maybe you are looking for