Is that possible to add one chracteristic which is in one cube to another cube which doesn't have that ?

Hi Experts,
Is that possible to add one chracteristic which is in one cube to another cube which doesn't have that ?
I want to do it with out using a multiprovider or virtual cube.
The scenario is ,
I have two cubes -Z_XXX;Z_YYY
Now Based on the client's requirement,(i.e. a report development) I can get all the chracteristics and key figures from cube Z_XXX except one key figure.
Now that keyfigure is available in the other cube (Z_YYY).
Now I want to add this particular characteristic in this Z_XXX cube & I don't want to use multiprovider or something like that.
Please help me.

HI Sumit,
Please find the link containg all details :
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b00ddebe-cc48-2b10-758a-8008e63d6826?QuickLink=index&…
Also , in case it is an attribute of existing characteristic, make it navigational and it will be avaible in Cube, just check the check box for same.
Thanks and Regards,
Amit.

Similar Messages

  • Is that possible to add set pagination to interactive reports?

    Hi, Guys:
    Is that possible to add set pagination to interactive reports like that in classic reports (like row 1 to 20, row 21to 40,...)? I know Jarola had implemented it on
    http://actionet.homelinux.net/htmldb/f?p=100:1
    see thread Column Alignment / Pagination in Interactive Reports
    I can add arrow to last page of report, but I still cannot figure out how to add set pagination to interactive report like what Jarola did, could anyone help me on this?
    Thanks.
    Sam
    Edited by: lxiscas on Nov 6, 2012 3:22 PM

    I made it!
    http://dbswh.webhop.net/htmldb/f?p=BLOG:READ:0::::ARTICLE:41900346848694
    Edited by: lxiscas on Nov 6, 2012 4:44 PM

  • IPhoto allowed me to add location to photos taken by camera with no GPS.  Photos doesn't have this facility. is there any way to do this?

    iPhoto allowed me to add location to photos taken by camera with no GPS.  Photos doesn't have this facility. Is there any way to do this?

    From http://geotag.modesittsoftware.com/Photo_GeoTag/FAQs.html
    1. Does Photo GeoTag work with iPhoto and Photos?
    iPhoto and Photos store their image files in various undocumented locations, and they seem to store the image metadata in separate locations.  If you edit an image in one of their sub-folders, iPhoto or Photos may not know about the change.  Instead export the image from iPhoto or Photos, geotag it, and then import it back into iPhoto or Photos to see the geotagged location.  In the future Apple may provide a means of accessing the image files directly, but for now you must geotag the photo before importing it, or if the photo is already in iPhoto or Photos, export, geotag, and then import.
    So it would seem that it isn't much better than using iPhoto 9.6.1 to do the geotagging, exporting the original from that app, & importing it into Photos.

  • Move data from one cube to another cube

    Hi,
    I am on BW 3.5 and I have moved the data from one cube to another cube and found that the number of records in the original cube does not match to the newly created cube. for eg. if the original cube contains 8,549 records then the back up cube contains 7,379 records.
    Please help me on what I need to look on and if in case the records are getting aggregated then how do I check the aggregating record.
    Regards,
    Tyson

    Dear tyson m ,
    check with any update rules in ur transfer.If so check in it.
    Just go through these methods for making transfer from one cube to another cube fully without missing data.
    Update rules method
    if it's updated from ods, you can create update rules for cube2 and update from ods
    or you can try datamart scenario
    cube1 right click 'generate export datasource'
    create update rules for cube2, assign with cube1
    rsa1->source system->bw myself, right click 'replicate datasource'
    rsa1-> infosource -> search 8cube1 name
    (if not get, try right click root note 'infosource'->insert lost node(s)
    from that infosource, you will find assigned with datasource, right click and 'create infopackage', schedule and run.
    Copy from
    While creating the new cube give the cube name in the "Copy from" section. It would copy all the characteristics and Key figures. It would even copy the dimensions and Navigational attributes
    Another option is:
    The steps for copying the contents of one cube to another:
    1. Go to Manage -> Recontruct of the new cube.
    2. Select the "selection button"(red , yellow, blue diamond button).
    3.In the selection screen you can give the technical name of the old cube, requests ids you want to load, from & to date.
    4.Execute and the new cube would be loaded.
    Its all that easy!!!!!!
    Refer this link:
    Copying the structure of an Infocube
    Reward if helpful,
    Regards
    Bala

  • I need to know how to delete the most recent version of Firefox. I JUST downloaded it tonight and my computer doesn't have that little edit bar to work with so I can download the proper Adobe player and my internet has been screwed up ever since I downlo

    I need to know how to delete the most recent version of Firefox. I JUST downloaded it tonight and my computer doesn't have that little edit bar to work with so I can download the proper Adobe player and my internet has been screwed up ever since I downloaded the new version of Firefox. I just want the old version of it back since I apparently can't download the Adobe stuff that is necessary to keep my computer safe from Hackers. It sure would have been nice to know there was an issue with the new Firefox Update BEFORE I uploaded it. I have Vista which is usually an issue with both Adobe and Firefox. I don't seem to be able to run much of Adobe at all on my computer because of the Vista.
    == This happened ==
    Every time Firefox opened

    I have also noticed all my settings won't stay set, example....I removed the check mark from "third party cookies", the when I close Firefox and reopen the check mark is back, also my tool bar has screwed up....can't reset, been having trouble the up grade.

  • When I click on a link in an RSS feed it used to indicate that I'd viewed that particular link by changing the icon to the left of the link. It doesn't do that anymore. [SOLVED]

    When I click on a link in an RSS feed it used to indicate that I'd viewed that particular link by changing the icon to the left of the link. It doesn't do that anymore. This started happening right around the time I updated to Firefox 4, but may have been a little before that too. For some things, like news and web comics it's just a little annoying. For important things like looking for new journal articles for my job, it literally makes my job more difficult. So fixing this would make my day.

    I seem to have solved my own problem. When I disabled the add-on "Tab Renamizer" everything started working fine.

  • How do I add music from my CD collection to iTunes if my Apple computer doesn't have an optical drive?

    How do I add music from my CD collection to iTunes if my Apple computer doesn't have an optical drive to take the music from the CD's to my iTunes library?

    1) Use a different computer which has an optical drive, then transfer the media files to the other computer.
    2) Buy an external optical drive for your computer.

  • Can we pull data from one cube to another cube

    Hi All,
    I need to pull the data for a 4 fields from an existing info cube to another cube. Can any one let me know the procedure of how to do this.
    Thanks in Advacne

    scenario cube1 --> cube2
    1) load data into cube1
    2) cube1 > export datasource > it creates the ds with 8cube1
    3) rsa1 > source systems > myself sourcesystem > replicate datasources
    4) cube2 > rt clk > create update rules
    5) map the update rules for the 4 fields and activate
    6) rsa1 > infosources > search for 8cube1 > create infopackage and load data.
    Regards,
    BWer
    Assign points if helpful.

  • I had music that I copied from disks into itunes on another computer, I no longer have that computer. Is there a way to get that music I previously had on itunes and put it on my current iphone?

    I had music that i copied from disks into itunes on another computer, I no longer have that computer. Is there a way to get that music back from itunes?
    Thanks

    If you failed to maintain a backup copy, then you would have to import the disks again.

  • Why my phone doesn't have that Red Green and Blue circles on camera, I have an iPhone4 v7.1.1

    My classmate has an iPhone 4/4s, the camera has Red Green and Blue circles while mine doesn't have that circles.

    Does your classmate have an iPhone 4? Or a 4S? There is no such thing as a 4/4S. Even with the same version of iOS, different models may have different features. As far as I know, the live filters are only available on the iPhone 5 and later.

  • It doesn't have that

    It doesn't have any choose a category!!!!!!!!! It has a search box!!!

    That's too bad ..... What in the world are you talking about?
    It doesn't have that.
    It doesn't have any choose a category!!!!!!!!! It has a search box!!!
    How would you answer this question? Wait .... There is no question.

  • When I create a new cube using another cube as template which datasource i

    Hi,,
    When I create  a new cube using another cube as template(copy) which datasource is assigned to the new cube, why because am getting all the fields which are there in copied cube even though I used only required fields.why this is occuring?
    Thanx in advance,
    Ravi

    Hi,
    Usually, when you copy the cube only data model is copied. means all KF and CHAR, NAV CHAR.
    May be after copying you can reassign (CHARS) once again in the New cube as per your requirement.
    When you create the update rules, there you can assign the Infosource or original cube as datasource.
    may help...
    Vis

  • Is it possible to add pic/diagram to SP file with link to another SP file?

    Hi,
    Is it possible to add a diagram, picture, or table to a SP file with link to another SP file?
    I know this is possible in, say, Word. For example, I can add a diagram and check a box to include a link to the source file - so that when the diagram in the source file updates, the diagram in my document also updates.
    This is also my goal in SP - instead of simply including a link to a document elsewhere in SP (or on the same site in SP), I would ideally like to display a diagram, picture, or table and include (behind the scenes if possible) to the source SP file
    so that, when the diagram/table in the source SP file updates, my SP file also updates accordingly.
    For example:
    Instead of:
           The diagram is located in:
           link
    I would ideally like:
           Diagram, picture, or table (with link associated with it) - users can click on the diagram or picture if they desire.
           The diagram or picture is updated whenever the source SP file containing the diagram or picture is updated (the source SP
           file will only contain a diagram, picture, or table)
    Any suggestions are welcome.
    Thank you very much.

    Is it possible to add a diagram, picture, or table to a SP file with link to another SP file?
    I know this is possible in, say, Word. For example, I can add a diagram and check a box to include a link to the source file - so that when the diagram in the source file updates, the diagram in my document also updates.
    This is also my goal in SP - instead of simply including a link to a document elsewhere in SP (or on the same site in SP), I would ideally like to display a diagram, picture, or table and include (behind the scenes if possible) to the source SP file so that,
    when the diagram/table in the source SP file updates, my SP file also updates accordingly.
    For example:
    Instead of:
           The diagram is located in:
           link
    I would ideally like:
           Diagram, picture, or table (with link associated with it) - users can click on the diagram or picture if they desire.
           The diagram or picture is updated whenever the source SP file containing the diagram or picture is updated (the source SP
           file will only contain a diagram, picture, or table)
    Any suggestions are welcome.
    Thank you very much.

  • Loading Data from one Cube into another Cube

    Hi Guys,
    I am trying to load data from one cube A to another cube B. Cube A has data around 200,000 records. I generate export datasource on Cube A. Replicated the datasource and created InfoSource and activated it.
    I created update rules for Cube B selecting Source as Cube A. I do have a start routine to duplicate records in Cube A. Now when I schedule load,
    It stops at Processing Datapacket and says no data. Is there something wrong with the update routine or is there any other way to load form cube to cube in a simpler way?
    Thanks in advance

    This is the start routine to duplicate records in two currencies.
    DATA: datew   TYPE /bi0/oidateto,
          datew2  TYPE rsgeneral-chavl,
          fweek   TYPE rsgeneral-chavl,
          prodhier TYPE /bi0/oiprod_hier,
          market  TYPE /bic/oima_seg,
          segment TYPE /bic/oizsegment.
    DATA: BEGIN OF S_DATA_PACK OCCURS 0.
            INCLUDE STRUCTURE /BIC/CS8ZSDREV.
    DATA: END OF S_DATA_PACK.
    S_DATA_PACK[] = DATA_PACKAGE[].
      REFRESH DATA_PACKAGE.
      LOOP AT S_DATA_PACK.
        move-corresponding s_data_pack to DATA_PACKAGE.
        if DATA_PACKAGE-loc_currcy = 'EUR'.
          DATA_PACKAGE-netval_inv = DATA_PACKAGE-/bic/zsdvalgrc.
          DATA_PACKAGE-CURRENCY = 'USD'.
          APPEND DATA_PACKAGE.
          DATA_PACKAGE-netval_inv = DATA_PACKAGE-/bic/zsdvalloc.
          DATA_PACKAGE-CURRENCY = 'EUR'.
          APPEND DATA_PACKAGE.
        else.
          DATA_PACKAGE-netval_inv = DATA_PACKAGE-/bic/zsdvalgrc.
          DATA_PACKAGE-CURRENCY = 'USD'.
          APPEND DATA_PACKAGE.
        endif.
      ENDLOOP.
    This is to load Quantity field
    RESULT = COMM_STRUCTURE-BILL_QTY.
    This is to load Value field
    RESULT = COMM_STRUCTURE-NETVAL_INV.
    UNIT = COMM_STRUCTURE-currency.

  • Loading data from one cube to another cube.

    Hi,
    Trying to copy the data from cube A to cube B...however after creating export data source(8A) on cube A, unable to find the infosource 8A.
    Do someone have any idea..... or I'm missing some steps?
    Help is highly appreciable.
    Regards,
    Jim

    Hi Amit,
    goto transaction sbiw in your BW system. Open 'Business Content DataSources' and select 'activate application component hierarchy'. After that you can additionally choose 'activate business content datasources'. Then goto rsa1->source systems. Right click on your source system (BW itself) and replicate the datasources. After that you should be able to see the application component DM in rsa1->infoSources. In application DM you should see all 8... infoSources and dataSources. If not, you should choose 'Settings->Display generated objects' from the top menu as already suggested.
    regards
    Siggi

Maybe you are looking for