Is the 1.1.1 update good?
alright well i know when they first came out with the 1.1 update for the 5th gen it was bad and would only allow me to watch a video for like 30 seconds then it would pause and have to refresh well i am wondering if the update 2006-03-23 1.1.1 is working right?
Thank you for your helpful response, Mr. Hall Monitor
http://en.wikipedia.org/wiki/Hall_monitor
Similar Messages
-
What exactly are the updates good for on an ipod
I ask because mine is windows format, and im having trouble transferring all the metadata off my ipod with senuti to a back up so that i can reformat the ipod to mac and then sync in my senuti backed up library. I was wondering if anyone knows what exactly are the updates that you get. my ipod is 1.2 5thgen.
If i were to have the latest update would i be able to see album cover art view when the ipod is plugged into itunes? I noticed that i can see that view in library mode but not in ipod mode. (my pod isnt synced)...
so what are these updates good for?hey thanks for your reply.
I do have it set to manual and i can see the art on the ipod by itself, but even with manual transfer itunes wont let me view the artwork modes unless i am playing off my computers library (which doesn't have the songs on my ipod on it). I called apple earlier today and some tech support guy claimed that itunes does not support this feature. Is this correct? can anyone out there see artwork modes on an unsynced ipod through itunes? -
I am updating my school's operating system for my iPads. I have been able to complete 2 carts of 30 (60 total). The next cart I was able to download the IOS6.3.1 update but it states the install is not available. Good internet connection. Please advise.....
Thanks!Hi nytesinger,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
Apple Configurator Help: About Apple Configurator
http://help.apple.com/configurator/mac/1.3/#cadf1802aed
Apple Configurator Help: Prepare devices
http://help.apple.com/configurator/mac/1.3/#cad96c7acd6
Cheers,
- Judy -
Hi the wifi when make update not works good
hi
the wifi when make update not working good
now i cannot turn on wifi the wifi button
can you help me please ????Hello Riham123,
Thank you for using Apple Support Communities.
It sounds like the wifi button is grayed out and you are unable to toggle it.
I recommend trying the steps in this article:
iOS: Wi-Fi settings grayed out or dim
http://support.apple.com/kb/ts1559
Verify that airplane mode is off by tapping Settings > Airplane Mode.
Reset the network settings by tapping Settings > General > Reset > Reset Network Settings.
Note: This will reset all network settings, including Bluetooth pairing records, Wi-Fi passwords, VPN, and APN settings.
Ensure that your device is using the latest software. To do so, connect your device to your computer and check for updates in iTunes.
If your issue is still unresolved, perform a software restore in iTunes.
All the best,
Sterling -
I don't know why the battery life has just become so poor. I can listen to 1 song and lose 1/2% battery life. I had all the settings the same as before updating to ISO6 and now it just goes. I did drop it around the same time but I have a stong case so I don't see how this should effect it. If anyone knows how to fix it would be a great help because I used to love iPod but I am very dissapointed.
Internal damage from fall or loose connector. Take it to
Apple to be checked. -
The ipod cannot be updated. The disk could not be read from.
The ipod cannot be updated. The disk could not be read from or written to.
This message appears every time I try and update my ipod or put photos on. I also get this message:
An error occured while updating the default player for audio file types. You do not have enough access privileges for this operation.
WHAT DO I DO???????Perhaps check for corrupted files--I had this issue with a messed up track/ file, and that kept killing the sync. More here:
Lost in Asia, "Disk Could Not Be Read From or Written To." #12, 03:32am Oct 15, 2005 CDT
As for the access privileges part, well, sorry, I have absolutely no idea what that means.
Good luck! -
Can you help me interpret the following lines in UPDATE rule?
Hi,
Can you help me interpret the following lines in UPDATE rule?
1. What is the role of role of u201CCHANGING RESULT.u201D and u201CCHANGING lc_local_value.u201D?
2. What is the role of the CALL FUNCTION 'CONVERT_TO_LOCAL_CURRENCY', in particular the Exporting and Importing parts?
3. Can I say that u201CCOMM_STRUCTURE-ORDER_VALu201D in the subroutine is passed to u201Clc_document_valueu201D in the u201CFORM loc_curr_convertu201D; and further passed to u201Cforeign_amountu201D in the u201CCALL FUNCTION 'CONVERT_TO_LOCAL_CURRENCY'u201D?
4. Finally, what becomes of my original u201CActual Goods receipt quantityu201D( 0GR_QTY ) which I am writing the routine for? I donu2019t see any where in the code that it is being referred to? Do any of these codes affect the value of 0GR_QTY?
5. Also, if there are 3 different subroutines in the INCLUDE and I am making the change described in #4 above, how do I know which of the 3 subroutines to call?
===============================
===============================
So I am reviewing a transfer routine in for u201CActual Goods receipt quantityu201D and routine an INCLUDE statement: INCLUDE RS_BCT_MM_UPDATE_RULES.
The update rule also includes the following properties to run the following subroutine in the Include:
IF u2026..
perFORM LOC_CURR_CONVERT
USING COMM_STRUCTURE-ORDER_VAL
COMM_STRUCTURE-DOC_DATE
COMM_STRUCTURE-ORDER_CURR
COMM_STRUCTURE-LOC_CURRCY
COMM_STRUCTURE-EXCHG_RATE
CHANGING RESULT.
I verified in the INCLUDE (RS_BCT_MM_UPDATE_RULES) and the subroutine is as follows:
FORM loc_curr_convert
USING lc_document_value
lc_date
lc_document_currency
value(lc_local_currency)
lc_rate
CHANGING lc_local_value.
conversion of lc_rate from floating-point to decimal. Necessary for *
call of CONVERT_TO_LOCAL_CURRENCY.
data lc_rate_dec type p decimals 5.
lc_rate_dec = lc_rate.
IF lc_document_currency = lc_local_currency
no conversion necessary -> Main case 1
AND NOT ( lc_document_currency IS INITIAL
OR lc_local_currency IS INITIAL ) .
lc_local_value = lc_document_value.
ELSEIF NOT ( lc_document_currency IS INITIAL
OR lc_local_currency IS INITIAL OR lc_date IS INITIAL ) .
conversion necessary with lc_date -> Normally not possible
CALL FUNCTION 'CONVERT_TO_LOCAL_CURRENCY'
EXPORTING
date = lc_date
foreign_amount = lc_document_value
foreign_currency = lc_document_currency
local_currency = lc_local_currency
rate = lc_rate_dec
IMPORTING
EXCHANGE_RATE =
local_amount = lc_local_value
EXCEPTIONS
NO_RATE_FOUND = 1
OVERFLOW = 2
NO_FACTORS_FOUND = 3
NO_SPREAD_FOUND = 4
DERIVED_2_TIMES = 5.
IF sy-subrc NE 0.
message a802 with lc_date lc_document_currency lc_local_currency
sy-subrc.
ENDIF.
ELSE.
if conversion not possible -> assign target values
lc_local_value = lc_document_value.
lc_local_currency = lc_document_currency.
ENDIF.
ENDFORM.HI,
Thanks so much the explanations.
I just verified again on our dev system and the update rule for 0GR_QTY (Actual goods receipt quantity) include the following:
perFORM QUANTITY_CONVERT
USING COMM_STRUCTURE-CPQUAOU
COMM_STRUCTURE-po_UNIT
COMM_STRUCTURE-base_uom
COMM_STRUCTURE-numerator
COMM_STRUCTURE-denomintr
CHANGING RESULT
Now, in the include, I also found:
FORM QUANTITY_CONVERT
USING QC_SOURCE_VALUE
QC_SOURCE_UNIT
VALUE(QC_TARGET_UNIT)
QC_UMREZ
QC_UMREN
CHANGING QC_TARGET_VALUE.
i. Does it mean it actually does quantity conversion?
ii. If you have access to the INCLUDE I will appreciate some hints on what the subroutine QUANTITY_CONVERT is doing. It does not appear do to be saying anything about quantity conversion; but it is supposed to be doing something with the parameters being passed from the update routine.
iii. In your response to #5, after all the computation in the INCLUDE, what comes back to the Update rule i.e. what comes back to become the value of 0GR_QTY?
Is it the u201CRESULT.u201D in the update rule or u201CQC_TARGET_VALUE.u201D in the subroutine in the INCLUDE.
iv. So, am to create an Update rule for 0PSTNG_DATE and the source is BUDAT; and I need to write a routine using the include INCLUDE RS_BCT_MM_UPDATE_RULES.
I looked through the INCLUDE and identified all the subroutines in this INCLUDE as follows:
QUANTITY_CONVERT
LOC_CURR_CONVERT
GET_WEEK
WEEK_DAY
QUARTER_DAY
--Does it mean that to use this subroutine, I can only use the USING parameters of one of these listed subroutines?
--Also, does it mean that because 0PSTNG_DATE is a date, I can only use one of
GET_WEEK
WEEK_DAY
QUARTER_DAY
--Or, are there other includes to be used for 0PSTNG_DATE
Thanks -
Since the iOS7.0.2 update to my iPhone 4S, I can no longer choose use of my Bluetooth device if using the power cord to listen to MUSIC or answer my phone (choice of powercord as 'dock,' speaker, & phone only). Was this former-feature now an oversight?? I'd really appreciate having my Bluetooth once again listed as a choice of audio option. Especially considering the battery life is not what it was prior to this update, and requires recharging often.
Sorry to tell you but unless you have a Retail Apple Store close by, they are the only ones I have found with all the adapters and accessories. I bought an extra lightning to usb adapter the other day to use in my truck. Good luck....
-
i have issue with my iphone5, the phone is open and good network signal, but when some one calling me they cant reach me, like the phone is off
You are as far as you can be with the original iPad; only iPad 2 and greater will update to 7+
-
Airport Utility on the Macs show good internet signals but on our two iPads and my iPhone 5 there are no indications of internet connectivity. One of the iPads is running iOS 7 but the other is still running iOS 6. The iPhone 5 is updated to iOS 7.
Is there a setting switch that if set incorrectly would create this problem? Like I said before, all the iOS devices stopped internet connectivity at the same time.
Update: Well while I was typing this I was called away to help get people to bed etc. And when I got back I tried all four iOS devices and, now, they all connect to the internet. I don't understand it. Two iPhones, different iOS versions, and two iPads, different generations and also different iOS versions, all decided that they would disconnect themselves from the internet but stay connected to the wifi network. Somebody must have an explanation for what just happened. Remember it isn't the router because the Macs all had uninterrupted internet connections. Weird!I used to have a satellite connection to the internet. When ever the power went off I was told to turn on the devices in a specific order for them to work properly.
Try shutting off every device including all iPads, iPhones, computer, Wi-Fi router and Satellite modem. Then turn them on one at a time in the order listed below. Be sure to wait until each device completes its start up routine before starting up the next item. When my satellite modem was restarted it often had to download an update. The time this took varied with the update. So be sure the Satellite modem is up and connected to the Satellite before going to the next device.
1. Satellite Modem.
2. Wi-Fi Router
3. Your computer. Check to see that your computer connects to the internet.
4. iPad or iPhone and remaining devices one at a time. -
I have an iMac G4 PowerPC with OS 10.5.? After deleting 17G of music files to make room on the 74G drive, The iPhoto and iWeb updates seemed to load okay, but the OS 10.5.8 update failed - message opened said the computer encountered an error and must shut down. Now I get the blue screen. Startup with 'V' pressed shows multiple lines saying: error-can't find IntelCPU Power Manager. What now?? I reset PRAM, I think.....?????
I am concerned that you might have applied a system updated intended for an Intel iMac, while you have a PPC (non-Intel) iMac. Your PPC OS should not be looking for an "IntelCPU Power Manager."
Have you tried booting from the 10.5 install DVD/CD and repairing the hard drive, plus repairing permissions?
If you done the repairs mentioned above, and your problem still persists, you can also try doing a safe boot. (see http://support.apple.com/kb/HT1455 ) Then, if none of these things worked, if I were in your shoes (it's hard to diagnose these things without being there in person) I would first check that there is adequate disk space, then I would boot from the 10.5 DVD/CD install disk and reinstall the operating system. There is an option to do an archive and install preserving user files/settings, that would be the option you want, as it will save your files but install a new OS. Make sure you have a good backup of your files first. If you do not have one, use "target mode" to copy all your files before embarking on an new OS install. Assuming that you do succeed with this install, then use Software Update to get the right updates for your iMac. -
Steve Jobs obviously was "the man" because every update or install now gives me problems... i can no longer download anything to my iphone.. giving me errors of "cannot install at this time" and i get an error installing itunes on my other laptop... wth is going on!??!
ok so the download problem with my iphone.. what could be the cause of that? ive restarted and deleted the "undownloaded app" over 10 times already. and restarted the iphone 10 times... next thing i know i cant install itunes on my laptop.... geez man..
obviously there is a fix which someone will help... but why should i have to go through all that crap to install a so called uncomplicated software... when you think about it this really shouldnt even be an issue.
normally if the thing dosent work. normally with most programs you just uninstall the uncompleted software and just reinstall and everything is usually good to go.. help!ive never had any problems with ap[ple products in the past... this is a first and a stupid problem if you ask me
-
Safari no longer works after the 10.5.3 Update.
I'm apparently having the same problem with Safari that I've noticed many other people on here are having.
When I try to open Safari after having installed the 10.5.3 Update it goes straight to "Application Not Responding" and I have to force it to quit.
So I figured a fresh Safari 3.1.1. install would do the trick. However, when I try to install that it tells me "You cannot install Safari on this volume. This update requires Mac OS X 10.5.2 or newer." at the select a destination step.
I haven't been able to solve my problem through the things I read in any of the other similar threads. Help?MacSavage wrote:
I cannot create a new thread on this forum in Safari, however. It works in Firefox, but in Safari there is no button (link) to create a new thread.
*Hi M'S', Welcome* to Apple's Users Help Users Forums.
A bit of a puzzler there. The button to create a new thread is *not in Safari, it's on the forum page.* (Not the Categories page, a bunch of folders, a level too far back.)
Good Luck, JP -
Not to update Goods receipt on process order in LIMS system
Dear all,
I am working on SAP-LIMS interface project.
Please help me out with the below requriement:
Release of process order (COR1) in SAP creates lot creation in LIMS (creates an inspection lot in QIWL table which is read by LIMS system to download data from SAP to LIMS).
When we do goods receipt (MB31) against the process order, currently it updates same inspection lot in QIWL table to send the same record for LIMS system again.
We have a requirement not to update on Goods Receipt to LIMS system.
Please let me know if there are any user-exits/BADIs for the same.
I know that goods receipt MB31 runs the FM MB_POST_DOCUMENT in background.
Please let me know if somebody has worked on this requirement.
P.S. - We need the functionality of updating goods receipt on purchase order in LIMS.
Thanks,
SachinHi,
If you post GR in Plant - A, then the stocks in the warehouse will reflect for Plant - A & not in Plant - B.
Although the warehouse is the same, it is linked to the combination of Plant & Storage location. You can check the warehouse stocks using LS26, just specify the warehouse number & material number.
But there is also a concept of planning plant & production plant, so Plant A can be where the planning takes place, while Plant B is where the actual production takes place. In this case, although you produce in Plant B, the GR will be done in Plant A.
Hope the above clarifies.
Regards,
Vivek -
Has anyone had issues with the most recent Yosemite update
I installed Yosemite October of 2014 mainly because I needed to update itunes to continue to help my daughter maintain her music files. Anyway the reason hardly matters. My computer and Yosemite did not get along. Posted up a file of my computer condition for people to look at here and the basic recommendation was to delete this that and the other thing. So I did that and the computer worked somewhat better. However I really am not sure if it was working better because Apple had been making progress with Yosemite ironing out Yosemite bugs. I had not reinstalled any of the software that it was recommended I delete back in October. So I doubt that is an issue.
Two weeks ago while updating, generally, a Yosemite update started downloading to my computer. It is now running 10.10.2.
Since then Mozilla crashes about five times a day and runs very slowly most of the time. Wondering if there is anything I can do or should I just wait it out...hope for the bestv AGAIN. I am encouraged by the fact that over time from October to mid February, Yosemite and my computer kept getting along better and batter. Since the update I am more or less back to square 1 as far as general speed and functionality and behind the eight ball as far as Miozilla goes as it is crashing constantly.
I also do not like how update files are identified in Yosemite. There are times when all you get is a notification that there are updates ready with no identification of what they are. Had I known that was a Yosemite update, I would not have touched it. What is up with this no identification of update files? Trying to ambush us now because people are beginning to avoid their updates? Good grief Apple.
Anyway....any ideas? Just wait it out? Hope Apple gets back on a path of bug fixes for Yosemite? Anybody with a quick fix for this one?Automatically checking for updates is not the same thing as automatically installing updates and even automatically downloading updates is not the same thing as automatically installing updates. If Apple has now decided to describe them and implement them that way ....that is a mistake!
Here is what I have in my App store preferences although I repeat, I have never changed anything. What items are selected there are the items selected ions ago or defaulted in possibly with iTunes 12.0 installed and I was always in the past been given the opportunity to view any updates BEFORE They installed.
"Automatically check for updates" is checked. That should not cause an issue of any kind. If it is that is a problem not of my making!
"Download newly available updates in the background" is checked with an additional descriptive line of information that reads "you will be notified when the updates are ready to be installed" I was going to uncheck this. Although I did not ever go to this location and change my settings which leads me to believe that this is a default choice in Yosemite or iTunes 12.0 as this is not the way I am used to my updates either coming to me or being installed
"Install app updates" is checked ...Really....with permission, without permission, with notification? What the heck does this line really mean? Going to uncheck this
"Install OS X updates" IS NOT CHECKED
"Install system data files and security updates" is checked. This is another one that I am going to uncheck
"Automatically download apps purchased on other macs" is not checked
This system clearly Installed an OS X update without even asking me if I wanted it installed regardless of the fact the box is not even checked. So I have no idea how it managed to do that when the check box for OS X updates is not checked. A big OS X screen came up as the thing started installing leaving little doubt what it was at the point of being too late to do anything about it
There is an interesting element to the relationship between "Download newly available updates in the background" and "Install app updates". If you uncheck the former, a check immediately appears in the box for the latter and the box ix grayed out preventing you from making further changes. So your options are for updates to be downloaded in the background or have updates installed without prior notification. What the heck kind of a choice is that?
I am going to uncheck all of these for the time being except "automatic checking" and "Download newly available updates in the background". The former should not cause a problem and has never in the past caused a problem. Seems to me that I am forced to the latter for now. However to be perfectly honest i no longer have any idea what Apple is doing and I am not completely convinced that they know either.....not any more
I am going to go to Apple Tech Support and get full descriptions from them as it appears possible that they have changed their definitions and descriptive materials with regard to update activity either in Yosemite or iTunes.
Finally, this issue with automatic checking has nothing to do with Mozilla crashing five times a day in Yosemite. That is a separate problem and I guess I am just going to have to hope that Apple Yosemite bug fixes brings this back under control.
Maybe you are looking for
-
How can I disable data access on C1-01 ?
I have a C1-01, for emergency use only. Today it displayed an unsolicited "Download Failed", message, and sure enough, my paygo account had been emptied. How can I prevent all data access, ie attempts to update firmware, internet access, etc? TIA,
-
Am a new Mac user after 30 years of PC. Very important to bring over my POPserve emails with attachments. Finally succeeded by using the Microsoft for MAC 30 day trial. Am willing to buy the microsoft software so that my emails/attached doc files
-
Scenario in which Conversation ID will not get generated
Hi all, I have a requirement wherein i need to capture the conversationID for logging purpose from my BPEL processes. However i have noticed that ora:getConversationId() is giving me NULL sometimes. Could anyone tell me what are the scenarios where c
-
Hi everyone, I am trying to assign a help document to individual ESS Area, eg pcd:portal_content/com.sap.pct/every_user/com.sap.pct.ess.employee/com.sap.pct.ess.roles/com.sap.pct.ess.employee_self_service/com.sap.pct.ess.employee_self_service/com
-
Error at the time of creating quote
Dear Gurus, I am trying to create a quotation at that time I am getting the error message "date period 20071022 period D is not valid" please help me on this. Thanks Hari