Is the 13" Aluminum MacBook (2008) the Same Size as the 13" MacBook Pro?

I just picked up a used 13" Aluminum Unibody MacBook and am looking to find a hardshell case for it. Wondering if the 13" MacBook Pro cases would fit?
Thanks!

The two are the same outside dimensions. The only outer difference is the 13" MacBook Pros have an SD card slot.

Similar Messages

  • Is the lightening port on a macbook air the same size as the pro?

    Easy question
    Is the lightening port on the macbook air the same size as the Macbook pro?

    thank you very much
    yes, I meant the thunderbolt port
    I just need to order an HDMI adapter cable, and ebay only lists Macbook Pro choices.
    I appreciate your quick response
    BV

  • Lightning to 30 pin adapter with a lightning end is the same size as the cable that comes with the phone?

    Has anyone found a lightning to 30 pin adapter where the lightning end is the same size as the cable that comes with the phone?  I know there have been some non-apple versions, but I can't tell if they are the same as the Apple versions where the lightnin end is slightly bigger than the cabe that ships with the phone.  Most iPhone bumpers only accomodate the original charing cabe ad the adapter cable is just slighter bigger and doesnt fit.  Also, i'm not referring to the square, cable-less adapter.

    Depending on your caes I shaped mine carefully with a craft knife seems all the case manufacturers designed the cases for lightning cables but seemed blind to the adapter and it's likely use
    Have you not seen the Apple adapter with .2m cable between the  plugs
    http://store.apple.com/us/product/MD824ZM/A/lightning-to-30-pin-adapter-02-m?fno de=3a
    will do what you want ,I use one in exactly same scenario

  • Creating PDF the same size as the original

    I have a TIF created in Photoshop CS2 and I'm trying to create a PDF that's the same size as the original (3 x 2 inches). What is the secret? I'm pretty sure I've done this before, but I can't figure out what to select for Paper Size to make this happen. Thanks for the help!

    Try opening the TIF file in Acrobat directly. I just opened a TIFF file and it came out 2.74 X 1.00. IrfanView says the TIFF is 2.7 X 0.4. It looks like the opening added a bit of height to the file, but the right idea.

  • I have created a .png logo to use on my video. It has it's own storyline so the logo is shown overthe whole video. Do I need to composite the logo storyline to the main storyline before exporting? Same question for the audio storyline.

    Final Cut Pro 10.0.8
    I have created a .png logo to use on my video. It has it's own storyline so the logo is shown over the whole video. Do I need to composite the logo storyline to the main storyline before exporting? Same question for the audio storyline.

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                     
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar
    The missing apps could have been done by setting the Restrictions that can hid those apps. If the backup was made with those retrictions set the the Restrictions are also restored.
    Thus, if you get it to work restore to factory settings/new iPod, not from backup                               
    You can redownload most iTunes purchases by:        
      Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • If the iPhone 3G is the same size as the iPhone 3G-S....

    If the iPhone 3G-S is the same size as the iPhone 3G; can I use the same Incase Slider Case or do I have to buy a new case?

    The size of the iPhone 3GS is identical to the iPhone 3G.
    If you check the size and weight for both via this link, they are identical except for the weight. The weight of the iPhone 3GS is slightly more than the iPhone 3G.
    http://www.apple.com/iphone/specs.html
    Message was edited by: Allan Sampson

  • HT5137 i tried using the setting icon to reset the prints and icon to a bigger size, thereafter the setting icon lost colore to gray and stopped responding

    i tried using the setting icon to reset the prints and icon to a bigger size, thereafter the setting icon lost color to gray and stopped responding.? most of the pop up boxes will also not respond why?

    Thanks Winston, restarting my router worked for me too. Seems that somehow the DCHP (maybe due to the Mountain Lion upgrade?) had assigned the same IP address to both the AppleTV and my iMac. The AppleTV stopped appearing as an AirPlay device for my iPhone and Mac, but still the AppleTV had Internet access.
    Restarting the router reassigned IPs and without fanfare, the AppleTV is now available to AirPlay.

  • Making A Row Of Thumbnails The Same Size As The Screen Monitor No Matter What Montior You Use

    I am making a website and am trying to get the row of thumbnails/cells (which contain 5 thumbnails across each set in a cell) to be the same length as the screen monitor so that you do not have to scroll horizontally across to see more cells/thumbnails in the table.
    Here is the thing.  When I first started making tables, I was making actual pixels to fit MY screen size, but then I found when I looked at the website on another computer the tables came out different sizes (because of different size monitors I assume).  So, I changed the tables from pixels to 100% and that seemed to do the trick.  Whatever computer I pulled the website up on, the tables extend perfectly across the monitor screen to its fullest extent and without having to scroll horizontally.
    The next part of the website involved adding thumbnails of images.  So I made a table 6 rows across by 5 columns down.  And I put a thumbnail in each cell, so that 5 thumbnails went across the row.  I also set the table width to 100% just like I previously did for my heading table.  When I tested it on a laptop computer it seemed perfectly fine and the 5 cells in the row extended across exactly to the length of the monitor.  But, then when I opened it up on a desktop computer, I had a problem.  What you see is 4 of the columns on the monitor and then the fifth column is further to the right off the screen, which makes you have to move a horizontal scroll bar to see the fifth column.  This table is also not flush with the heading table either obviously, although I have both set to 100%.
    I don't know if my problem has to do with the table I made or the image sizes in Photoshop.  In photoshop after I had scanned the image I went to "Image Size" and reduced the "document size" width to 1.5 cm to make the image come out a lot smaller.  Should I be doing something different in Photoshop when changing the "Image Size"? Maybe saving it as a different measurement (choices are percent, inches, cm, mm, points, picas, columns)?  Or, do I need to change something with my table/cells?
    Anyone know?
    Thanks.
    P.S. I will post this in Dreamweaver and Photoshop, to get a little more help.

    If I have to accept the fact that this table I made can't fit each person's monitor screen, then ok, but at least have it to where all the tables are flush with each other.  If you take a look at the website URL I posted, every table I made for this page is set to 100%.   No matter what computer I pull up the webpage, the heading tables and bottom copyright table come out to 100% of the screen size like it should.  It is the tables I have for the pictures that extend pass this and make a horizontal scroll bar necessary and are thus not flush with the other tables.  And,I figured out why.  When I resized my images in Photoshop, I set the width of each thumbnail to 177 px.  I also have 30 px padding on both the left and the right side of each cell (60 px total).  So, calculating this we have: (177 px x 5 images across = 885 px) + (60 px padding x 5 cells across = 300 px) = 1185 px....an EXACT amount (which is MORE than my screen width) and OVERRIDES the 100% I set for the table.  Therein lies the problem.
    So, what I need to figure out is how to make either the cells or images adjust accordingly to fit the actual width of the monitor; 5 cells across = 20% each cell = 100% grand total across.
    Follow me so far?
    I know there has to be a way.  I've seen other pages that can do it.  I will keep trying and eventually figure it out.
    Thanks for the help.
    From http://www.awdsf.com/courseware/html/html2_tables.htm:
    " A website that         requires side scrolling is considered very un-professional."
    And I couldn't agree more with this statement.

  • How Can I replace an image and save the same size as the previous?

    I want to replace an image in a PDF, but I would like to keep the same size, and location as the previous. I have tried to to it, but the new image takes a different size.
    This is a PDF exported from an InDesign template.

    Thank you.
    The problem is that the person to edit the PDF doesn´t have ID and doesn't know how to use it.
    The idea is that the design department create very sharp ID templates for people from other departments of the company only have to replace information (text and image).
    We are looking for a program to edit PDF files and function as templates forreplacement information.

  • Is the original iPad wi fi the same size as the 3G model?

    I'm finding conflicting information on this ... A case I just ordered said it was for the iPad 3g and I have the wi fi model.

    I had one of each and they are exactly the same size.

  • Does the SWF need to be in same directory as the HTML?

    I'm relatively new at Flash, so apologies if my question has
    an obvious answer... I've searched the newsgroups and other forums
    and haven't found anything similar. Here's my problem:
    - when my html doc is in the same directory as the swf file,
    the movie appears and plays fine in my browser
    - when my html doc is in a different directory as the swf
    file (but calls the swf using the correct path), the movie doesn't
    appear.
    The exact html file that works when it's in the same
    directory as the swf doesn't work when it's moved out of the
    directory(and the path to the swf modified correctly)... This
    problem doesn't occur with a different swf file (inherited from
    another designer).
    I use Flash MX2004 for Mac.
    I've tried publishing to Player 6, 7, actionscript 1.0,
    actionscript 2.0 with no difference in results.
    Is this strange situation a Flash-on-Mac thing, or is there
    some setting or parameter that I can set to resolve this?
    Leif

    1) the swf is not neccesary to be at same directory with html
    2) when you load a swf from different directory, and you load
    other swf into the main swf, all path are relative to the html, but
    not swf.
    3) it is nothing about what version of flash or what platform
    you are using.

  • Same size for the scheduling report

    for the schedululing report, if i create my report with any size it is displaying me with same size 7(when we delivr rport th users email's). can you please help me how can i change my scheduling reports size(data size)

    Hi User,
    if i create my report with any size it is displaying me with same sizeDownload the report to Excel and check the size !
    how can i change my scheduling reports size(data size)Get the huge data into report and schedule it then check the size of your report
    Thanks,
    Saichand.v

  • I put one movie into the middle of another.  Now the inserted movie frames are not the same size as the other movie.  I can't find how to correct this.  Can someone help?

    Please help.

    If the two files do not have the same dimension you can adjust them via the Movie Properties window.
    When you add two files that don't have the same dimensions the default position for the added file is 0,0 (upper left corner).
    Open the Movie Properties window, single click on the video track you wish to adjust and then click the Visual Settings tab.
    You can then adjust the dimensions (to fit the other track) or the "offset" values to position it (inside or outside of the dimensions of the other track).

  • Can't use the Zoom Tool to set the Magnification level of pages to diff sizes from the preset ones

    Hi, I am trying to use the Zoom Tool and "Set Magnification" on my Dreamweaver CS5.5 in order to view my pages at different magnifications when working on them.  My problem is that I need to use different sizes than those sizes that are available under the preset magnification levels list (which are for example 100%, 150% or 200%).  These are the ones that  come up on the zoom pop-up menu.  The dreamweaver tutorial says that I need to type in the size I want (e.g. 115% or 130%) in the "zoom text box" and it will then apply that size to the page but the box does not let me change whatever size is currently in it.  I can’t override or delete whatever preset size is in the box or do anything to change the zoom from the pre-set levels! I would really appreciate some help with this thanks

    Hi Ben, thank you for the reply, unfortunately that was one of the pages I was looking at to try and fix this issue but it is of no help. 
    The page says for zooming in and out of a page to "Type a magnification level in the Zoom text box.".  My dreamweaver will not let my type a manficiation level in the zoom text box.  It just won't let me override whatever is in the box (e.g. 100%) so I can't change it from the default pre-set magnification levels. It is so frustrating!
    Does anyone else have any other ideas?
    Thanks
    Rachel

  • HT3390 OS X 10.9.2 how to use the Multi-Touch trackpad to adjust icon sizes in the Finder like previous OS?

    After I upgrade my OS X 10.6 to 10.9.2, I lost.
    Everyday I search the forum to look for the "feeling" of using Mac OS (migrate from windows to OS X10.6). The OS X 10.6 is just great.
    Now the questions, how to use the multi-touch trackpad to adjust icon size with simple pinch open or close gesture?
    Thank you.

    I might also add, you can run 10.6.8 Server in virtualization, if you need access to Rosetta applications:
    https://discussions.apple.com/docs/DOC-2295#ROSETTALION

Maybe you are looking for

  • Need to convert .m4v video to be editable in iMovie '09. Driving me insane!

    I am new to Macs as a whole, and have only owned my MacBook Pro for a month, now. I am skilled in iMovie '06, however, as it was a program I used at school for three years. I made some videos for my media class using iMovie '06 that I then exported t

  • How much does an iPod shuffle hold?

    Earlier today I found an iPod shuffle (1GB 2nd gen silver) on 5th Avenue in New York on my way to the Apple Store. I was wondering how many songs it holds total? It works and everything too!

  • E mail with PDF attachment

    Hi , I have a requirement where I need to send the comments that are entered in the portal to a list of e mail ids . I tried with spool and it is not working . I tried even with the class CL_BCS same problem. Could you please suggest me ? I heard tha

  • Help on 2d array needed

    Hi everybody! I'm relatively new to Java and I need some help. I've spent many hours googling and searching this forum but I couldn't find a solution for my problem. I have a JFrame with a JTextField and a JButton inside. In another frame I want to p

  • Refresh container to show other ALV

    Hi, I have build a report with an ALV for some header data and - when you doubleclick - a second ALV with the details. (I used CL_SALV_TABLE). Both ALVs are separated with a splitter.  Works fine. Problem is that I want to be able to show another det