Is the 20% discount added before or after a reward certificate?

Hello again. I got another question regarding the 20% discount. Is the 20% discount added before or after a reward certificate. So say for example, if I purchased a game for $60 and I had a $20 certificate, would my 20% discount activate first? Thus making the price 47.99 and then the $20 certificate reduced from that, making it 27.99 total. Or would it be the opposite and the certificate reduces off the $60 game first resulting in a grand total of 31.99?

Hey again JRxPHANTOM,
Good question! My Best Buy reward certificates are considered to be a form of payment, so they're applied to purchases after any applicable bundle pricing or discounts. Unlike traditional forms of payment though, they're applied before sales tax is calculated.
Here's how it would work using the example you provided (a $60 game, 20% Gamers' Club Unlocked discount, and a $20 reward certificate):
The base total is calculated ($60.00)
Your GCU discount is applied ($60.00 - 20% = $48.00)
The reward certificate is applied ($48.00 - $10.00 = $38.00)
Sales taxes are calculated ($38.00 x local rate)
The remaining balance due would then be collected, as with any other purchase.
I hope this helps.
Aaron|Social Media Specialist | Best Buy® Corporate
Private Message

Similar Messages

Create client vpn package before or after upload root certificate

Hi everyone,
I am building funtion create client vpn package base on os bit (64 or 32) to connect point to site of azure virtual network
I want to ask somebody
Create client vpn package before or after upload root certificate?
If i upload root certificate, funtion return error 404
if i do not upload root certificate and run funtion generate
funtion return status code is accept
correct resuft follows msdn is created
althought request body is correct
ResponseUri = {https://management.core.windows.net/29976d9e-898b-46ab-9f80-6238b4f1725e/services/networking/quyen_network/gateway/vpnclientpackage}
<VpnClientParameters>
<ProcessorArchitecture>Amd64</ProcessorArchitecture>
</VpnClientParameters>Thanks for you supports,Hoa Nguyen

Hi Hoa Nguyen,
I'm assuming you are creating a Point-to-Site VPN Connection, for which the steps would be:
Configure a Virtual Network and a Dynamic Routing Gateway.
Create your Certificates.
Configure your VPN Clients.
So to answer your question, you would upload the root certificate before you create the client VPN Package.
You could refer the following link for details:
https://msdn.microsoft.com/en-us/library/azure/dn133792.aspx
Would you be able to provide us the complete error message you get when you upload the root certificate?
Regards,
Malar.

Did anyone else see an Arabic caricature after the IOS update flash on the white screen either before or after the "hello".

Did anyone else see an Arabic caricature flash briefly when the white screen appeared? I don't know for sure if it was before or after the "hello" greeting.

If you leave it alone, it goes through several languages in a loop.
It's character, not caricature.

What is the best app for before and after photos for my Mac?

I am looking for a program or app for my mac so i can put pictures up side by side.... like before and after photos. Any suggestions?

best cheap solutions.
acorn
https://itunes.apple.com/us/app/acorn-4-image-editor-for-humans/id634108295?mt=1 2
pixelmator
http://www.pixelmator.com/
Fotor (my fave) and FREE
https://itunes.apple.com/us/app/fotor-photo-editor/id503039729?mt=12
FXphoto studio
https://itunes.apple.com/us/app/fx-photo-studio-pro-effects/id312506856?mt=8

SOAP encryption. should digital signature added before or after encryption?

I'm developing secure web services. I want to add timestamp, digital signature and encrypt the soap message. What's the order? 1. timestamp, 2. signature, 3. encryption?

Assuming the API you are using allows you to apply all pieces in any order, I would encrypt before signing. Signature verification should be quicker than decrypting and if the signature fails, you don't have to bother decrypting. If you think the timestamp is something confidential, add that before you encrypt, otherwise not.
Edit: Though I don't think there's really a "right" or "wrong" way to do it. There's trade-offs no matter which way you do it. If you encrypt last then someone looking at the message just sees an arbitrary blob of bytes...
Edited by: dstutz on Apr 10, 2008 7:45 AM

New Page before or after subtotalled group

I have a report which covers multiple projects with subtotals for each project. I currently have the situation where the page break cuts in the middle of the project group and shows on the next page, you end up not knowing what the project is. I can set page breaks so they are defined but the second projects or elements to each project are added it inserts a blank or a partial page. I'd like to have the page break inserted before or after the project group. Any suggestions?

I was thinking that would make the most sense also. It's just that the Lenovo Win8 pages say to do your updates *before*.
http://download.lenovo.com/lenovo/content/windows8/upgrade/think/notebook2_en.html
And then there's this really scary-looking page about everything you should un-install first:
http://download.lenovo.com/lenovo/content/windows8/upgrade/think/notebook4_en.html
Is this for real? This would take hours.

Oracle Alert: Access before and after update values of a table column

We have a requirement where a notification needs to be sent when 'END_DATE' attribute (column in a table X) is set, in an Oracle Applications form.
I have defined an Event based Oracle Alert which fires 'On Update' of the table X.
Could anyone please let me know as how to access the value of 'END_DATE' before and after update (i.e :new.END_DATE and :old.END_DATE) in the sql query of the alert.
The need to use the before update and after update values of the attribute 'END_DATE' is that if we add the condition END_DATE is not null, the alert is sent even if any other attrbutes are updated in the Oracle form which is not the intended behavior.
Appreciate any help.
Thanks

Hi
use selectionlistener for your first table then add clientlistener and serverlistener so that you will get the rows on click in back bean.
then get second table vo and and create and add row for that view object. add partial target to refresh your second table from back bean.
on click of save call commit operation.

Proble with Before and After in camera raw

The problem that I am having is the before and after in Camera Raw. When I press the P key for before and after; CR display the before and after to whole changes that I made and not just to one section. Let say, I am in the Detail section and Just want to see what changes I made in the Detail section only. I used to press the P key, but now I am seeing all the changes that I made to my file. I am using Adobe Photoshop CC and all my software is updated. I appreciatre a fix to this problem with many thanks

Alternatevely you can take advantage of the new function recently introduced in CC. Press "Q" , this will split the monitor in two, (either vertically or horizontally) and each time you go to a new tab and make some change you can go back to previous state by clicking the icon in the bottom right corner (see the picture).
as you can see..you can "toggle between current settings and defaults for the visible panel"

5.2 Pages, how to create white space before and after paragraphs?

Hi everyone,
I'm having a very frustrating time with the new 5.2 version of pages after upgrading from a prior version. In the previous version, you could easily adjust the exact amount of white space before and after each paragraph. You were able to do this from within the inspector, but for the life of me, I cannot find it ANYWHERE in the new version and I'm ripping my hair out trying to find it.
Surely you must be able to control the amount of space before and after each paragraph? It's totally useless to me if I can't; I want to be able to format my documents how I want; ie. plenty of white space between paragraphs and list points, not all bunched up together.
Someone please help me! Thank you so much!

Try telling Apple that. Start by rating/reviewing Pages in the App Store.
I have been told repeatedly by Apple staff that the new User Interface makes it "Much simpler".
When I ask how? …and point out how many (more) hidden steps there are, they don't want to talk anymore.
Apple's standard response to just about everything lately, unfortunately.
btw If you have the choice, use Pages '09 instead. Less buggy and way more features, better laid out.
Peter

How to make an before and after effects?

So, I want to make a video that show the audience this is before and after the edit. And i want to make it look like this YouTube Rewind 2014: Behind the Scenes - YouTube
How to make it?
Thanks:)

Really? You take footage of you shooting the video with another camera then you edit it together with shots of the finished project. If you want to show before and after shots of an effect you just put the original footage on top and animate a mask or opacity to reveal the rendered effect below.
If you can't figure out how to make a before and after then you will have a very difficult time doing any effects using AE because there is absolutely nothing in this before and after but very basic editing and masking.

White spaces before and after Images

I have several images in my FM document,
They are either gif or jpg.
All set in Anchored frames, left-aligned.
I have made most of them conditional for Online help, so they
dont show up in my Online help.
My issue is I am not sure how to remove all the space that
appears before and after the images (they are not displayed because
I have set it to conditional)
I remember somewhere that the spaces for such images can be
removed.
Please let me know if there is.

Hi,
Thanks for replying.
I have removed the spaces before and after the images in
Frame.
Set the images to be conditional (only for print). If there
are any images they are in anchored frame--left aligned.
So my problem is that the space before - after and the place
where the image originally was (now not displayed as it is
conditional) have these huge white spaces displayed.
I am not sure how to map them or how to delete them.
I am familiar in FM, and Robohelp (although i have worked
with Word only and it was easy). For some reason this seems too
hard.
Hope I have gotten across to you with my question.

Hi, Just switched from CS6 to PS CC. I am used to using ACR in CS6 with it's preview checkbox in the upper right-hand corner. I do not see that checkbox in PS CC. I see that they have added side-by-side, right and left and top and bottom before and after

Hi,
Just switched from CS6 to PS CC. I am very comfortable using ACR in previous versions. I liked to use the preview checkbox located in the upper right-hand corner to see before and afters. That checkbox is no longer in my version of PS CC. I see that they have side-by-side, top and bottom and right and left before and after options in the lower right-hand corner in this version. Is there anyway to get that legacy preview checkbox back so that I can use it?

Hi Warunicorn,
Thank you very much. I just could not find it on my own. I will have more questions as I get into it.
Jim

Do we have a way to get the differences between xtext model before and after partial parse?

Do we have a way to get the differences between xtext model before and after partial parse?
As an example i have file contains 4 lines, xtext parsed this file and generated its model, then i made small modification in line number 3, so xtext partially parsed the file and generated another model.
The question is could we get the nodes that has been deleted from the model?
could we get the new nodes added to the model?
could we get the differences between the two models?

Workflow {
bean = StandaloneSetup {
scanClassPath = true
platformUri = "${runtimeProject}/.."
// The following two lines can be removed, if Xbase is not used.
registerGeneratedEPackage = "org.eclipse.xtext.xbase.XbasePackage"
registerGenModelFile = "platform:/resource/org.eclipse.xtext.xbase/model/Xbase.genmodel"
component = ParseXextModel{
//Load the xtext model and keep the reference of the inmem model
component = DirectoryCleaner {
directory = "${runtimeProject}/src-gen"
component = DirectoryCleaner {
directory = "${runtimeProject}/model/generated"
component = DirectoryCleaner {
directory = "${runtimeProject}.ui/src-gen"
component = DirectoryCleaner {
directory = "${runtimeProject}.tests/src-gen"
component = Generator {
pathRtProject = runtimeProject
pathUiProject = "${runtimeProject}.ui"
pathTestProject = "${runtimeProject}.tests"
projectNameRt = projectName
projectNameUi = "${projectName}.ui"
encoding = encoding
language = auto-inject {
uri = grammarURI
// Java API to access grammar elements (required by several other fragments)
fragment = grammarAccess.GrammarAccessFragment auto-inject {}
// provides a compare view
fragment = compare.CompareFragment auto-inject {}
component = ParseXextModel{
//Load the xtext model again and keep the reference of the inmem model
component = CompareModel {
//Implement this using EMF Comapre to see the differnces between 2 models
}

Is the price in US and Canada website before or after tax?

Is the price in US and Canada website before or after tax?

Before tax. The applicable tax amount will be added when you checkout.

My ipod touch is stuck on the apple logo and after a while a white screen comes up and it restarts and the same thing all over agan. this happened to me before and after a while it turns on but why does it keep on doing this?

my ipod touch is stuck on the apple logo and after a while a white screen comes up and it restarts and the same thing all over agan. this happened to me before and after a while it turns on but why does it keep on doing this?

Try connecting the iPod Touch to your computer and restore it. http://support.apple.com/kb/HT1414

Is the 20% discount added before or after a reward certificate?

Similar Messages

Maybe you are looking for