Is the 30" for me?

I really need a second monitor, and I want the best of the best. I have a 20" iMac, 1GB RAM 2.0GHz 250GB Hard Drive, and I want to play HD videos and stuff on a really nice screen. I tried my own 19" 720P LCD HDTV, but the settings are horrible. The screen shakes when it is zoomed out (which is still too big) and when zoomed in it is too big to see anything well. I like to make and edit movies (want to study cinematography). So, is the 30" screen right for me?

Does that mean that the 30" only works to it's full potential with the Mac Pro? Ok. With a 23" and my iMac will I be able to get full HD on it? Also, will the 23" shake like my TV does? Will I be able to have it zoomed out to how I see the screen on my iMac? Sorry I don't know the tech. terms. Thanks for the help.
-Ken Cochran
Message was edited by: KenCochran

Similar Messages

TS2518 Help, I had aperture open and working on a image and did not have a battery in and bumped the power off. As a result it will not open my master, it is locked. when I try to open that Library it says There was an error opening the database for the

Help, I had aperture open and working on a image and did not have a battery in and bumped the power off. As a result it will not open my master, it is locked. when I try to open that Library it says There was an error opening the database for the library. I have tried every thing. I updated the other libr but now it will not open the main to update. What do I do?

Try starting Aperture with the command and option keys held down. You'll get 3 options.
Try each, starting at the top, in order, checking after each to see if it fixes the issue.

HT201328 I have been given permission for unlocking my iphone 3 GS from Orange. I want to set up the phone for my wife to use with a new number and carrier. Do I unlock under my itunes account first or set one up for her and then unlock the phone.

I have been given permission for unlocking my iphone 3 GS from Orange. I want to set up the phone for my wife to use with a new number and carrier. Do I unlock under my itunes account first ( I now have a new iphone on this account) or set one up for her and then unlock the phone. I am worried about upsetting the new phone.

I would complete unlocking as is and then
restore as new once you know the iPhone is unlocked
Be aware Orange will process the request at their speed
one of the reasons they usually reside at bottom of User Sat surveys
will likely take weeks
This may also help
http://support.apple.com/kb/HT5014

I downloaded 11.1 but now can't access the store, can only view my library. I've reinstalled but still get a blank, white screen when I try to go to the itunes store. How can I get to the store for purchases?

I downloaded 11.1 but now can't access the store, can only view my library. I've reinstalled but still get a blank, white screen when I try to go to the itunes store. How can I get to the store for purchases?

In iTunes prefs>Store - is the Store check box unchecked?
Did you repair pemissions with Disk Utility?
MJ

Is there a way to selectively edit a conversation in iMessages instead of clearing the entire conversation? Like you can do on the iPhone for instance.

Is there a way to selectively edit a conversation in iMessages instead of clearing the entire conversation? Like you can do on the iPhone for instance.

Did you find an answer to your question?
Would it also apply to Mountain Lion's Messages?
Thanks

"songs..can't be updated b/c all the playlists for updating no longer exist

My Ipod was "off power" for so long that it "forgot" all its music. Now when I plug it in to my base computer, rather then synching it says "songs on the ipod "name" cannot be updated because all the playlists for updating no longer exist"

Hey.
See if this can help;
http://discussions.apple.com/thread.jspa?threadID=121728&tstart=150
Cheers!
-Bryan

"All of the playlists for updating no longer exist"???!!

I created a few new playlists and deleted an old one in iTunes, and then when I plugged in my mini to update I get the message:
Songs on the iPod Kellee's iPod cannot be updated because all of the playlists for updating no longer exist"
There are no songs in my mini after this msg. I reset it, tried to update again, but got the same msg. Please help!!

Hi Kellee!
Why do people delete playlists?? Seems like you have the same problem someone I tried to help has. She got the exact same error message when she deleted a playlist. If I were you I would have shifted some songs around, changed the name of the playlist to something else but NOT deleted the playlist. I don't think you can get the same playlist back once you delete it. Question is why is your iPod not recognizing your new playlists and it's requesting to update the playlist you already deleted?? I'm afraid I can't help you but maybe someone else can. I just wanted to say this.

There should be a plus and minus for zoom on the maps for iphone

when driving having to use two hands and navigate is troublesome to say the least. I know its cleaner and simper when not crowding the screen or maybe a prgramming issue just seems like it would be easier to use with one hand when driving sometimes if i had the buttons for zooming more safer too. Or maybe not. Because its making you stop or you have to take your other hand off the wheel i can do it with one hand but maybe not everyone can zoom with one hand while driving. Just a suggestion on something apple might want to put into next maps maybe or maybe you wont even need it since now theres turn by turn. It still neccesary for using it on a bicycle or slower moving forms of tranportation where you might need it. Just a suggestion i thought would be helpful and maybe even safer.

yeah but how many people do you think in actuality use it the way you are saying. not me when i drive im always looking for a road to see if i passed it or not and thats because i had to reroute my traffic or im lost and i turn on the map and or i passed something because the map is sometimes off etc... It could be anyting not just the need to not touch your phone.

Do you have any idea what is the BADI for creation of Purchase Order?

Hi Gurus, I would like to ask regarding the BADI for the P.O creation in SRM. I have a requirement that if the Account Assignment Type is "asset" it should tick the checkbox (goods receipt/confirmation of performance of service) in the related documents tab of item. Thanks a lot. I hope you can help me gurus.

Thanks for the help.

Have family plan with 250 data which I almost use each month. Going on vacation and will be on the road for two weeks. Should I up my data for a month then change back. Is it worth it or should I just run over and pay the extra 15 per gig?

have family plan with 250 data which I almost use each month. Going on vacation and will be on the road for two weeks. Should I up my data for a month then change back. Is it worth it or should I just run over and pay the extra 15 per gig?

Hello mlazaretti. Vacation time is awesome. (Especially a road trip!) Since you will be going out for two weeks, you never know if having extra data may come in handy. I highly recommend switching to the next tier up so this way you have more data. This way it is only $10.00 more versus $15.00, and you dont have to worry about overages. Then change back at the start of the next billing cycle.
If you need help making this change let us know! Have a safe trip!
NicandroN_VZW
Follow us on twitter @VZWSupport

Hi all, I upgraded my MBP to Lion , but on the screen where i need to type my password, click on my photo and it does not appear the place for me to type my password and it stay stuck there. Can anyone solve this problem for me?

Hi all, I upgraded my MBP to Lion , but on the screen where i need to type my password, click on my photo and it does not appear the place for me to type my password and it stay stuck there. Can anyone solve this problem for me?

Reboot the machine holding Command and r keys down, you'll boot into Lion Recovery Partition
In there will be Disk Utility, use that to select your Lion OS X Partition and Repair Permissions.
After that is done reboot the machine and see if you can log in.
If not repeat the above steps to get into Lion Recovery, get online and reinstall Lion again, it will overwrite the installed version and hopefully after that it wil work.
Reboot and try again.
If not follow my steps to create a Snow Leopard Data Recovery drive, then option boot from it and grab a copy of your files off the machine.
Then reinstall all your programs onto the external drive like setting up a new machine, then use Disk Utility to erase the entire internal boot drive (select the drive media on the far left, not the partiton slightly indented) format Option: GUID , 1 partition OS X Extended and then use Carbon Copy Cloner to clone the external to the newly formatted internal drive. Once that is finished reboot and disconnect the external drive.
Once you go that, boot into Snow Leopard and update to 10.6.8, use the AppStore and option click on Purchases and download Lion again and install.
Lots of work, but there is no Lion disks.
https://discussions.apple.com/message/16276201#16276201

What is the Tcodes for Uploading of data using BDC & CATT

PP members:
I was going through the cutover activities , and what I understood is we transfer all the legacy system data into SAP before going live
The data upload follows certain steps (depends on the organizational design load strategies)
First we upload all the master data ( material master, BOM, W/C's & Routings)
Then the transaction data ( Ideally speaking, there should no open orders i.e. WIP as on the day of cutoff )
If the WIP (Work in Process) is unavoidable then the materials consumed shall be treated as materials of the previous stage and necessary adjustments shall be made after cutover day
At this point, I could not able to understand what does the author mean materials of the previous stage
Now comming to the uploading of data into SAP from legacy system, we use tools like LSMW, CATT & BDC
Is it a must to use only LSMW tool to upload master data or any other upload tools are fine
Lastly,. I am not sure about the Tcode of CATT & BDC
Summary of the questions:
1.What does the author mean material of previous stage, for WIP materials during cutover activities
2. Is it mandatory to use only LSMW tool for uploading for master data
3. What are the Tcodes for upload tools CATT & BDC ?
Thanks for your time
Suren R

Dear,
1.What does the author mean material of previous stage, for WIP materials during cutover activities - as i understood, what is the stage of material..like it must have gone through 2 work centers and other 2 is left. i.e. you need to create Production order with only 2 operation as other 2 is already over. - usually it is done in such a way that we will create Production order and confirm till 2 operations and WIp is calculated so thatb FI will tally the books in SAP and lagacy.
2. Is it mandatory to use only LSMW tool for uploading for master data - no you can use any tool as required and suits yr requirement
3. What are the Tcodes for upload tools CATT & BDC- BDC through a prog in SE38. CATT through - SCEM.

Changing the order for printing portfolio files in adobe acrobat 9 pro

Does anyone know how to change the order for printing pdf files that are part of a portfolio in adobe acrobat 9 pro? The documentation seems to say that it prints files alphabetically by filename rather than by the internal sort order. This won't work for me. Any ideas? Thanks.

Question1: No.
Question2: No.

LR - the showstoppers (for me)

Let me say from the outset that I really want to like LR and use it extensively because I like the library and - in general - I like the UI.
I have spent the last 3 days evaluating LR and comparing it to my current workflow which is DownloaderPro-Capture1-PhotoShop-QImage.
Despite the fact that there have been many improvements with v1.0 compared to B4.1, LR is still not the one-stop-shop for me for the following reasons.
1) it can't match DLP for flexibility. At the moment, I put in my CF card and DLP automatically downloads the images to my folder structure, i.e. year/year_month/year_month_day/filename. LR still cannot do this. So I will have to continue using DLP.
2) althought the RAW conversion produces good colours and detail, and the develop module has excellent functionality, it cannot replace C1 for 3 reasons. Firstly there is still no 'one key develop' that automatically sends the developed file to a subfolder of where the original image is stored, e.g. Develops. Secondly, LR cannot do batch processing, and lastly, the sharpening is still poor. It is not aggressive enough and still produces horrendous noise in comparison to C1 or PS. So, even though the LR RAW conversion is good, I would still have to use C1 for good workflow and PS for sharpening and other PP effects.
3) The print module is fairly redundant as if I have had to come out of LR for the reasons above, then I might as well use the superb QImage for printing which has much more flexibility and a greater feature set than LR. Why LR - especially in the light of trying to be a complete package - does not have soft-proofing is a mystery to me!
On usability issues, I have found the sliders to be very unresponsive and constantly find myself having to slide them back as the initial adjustment was jerky and difficult to use accurately.
The preview situation is also poor. LR seems to constantly have to refresh previews and thumbnails.
Another annoyance is that there doesn't appear to be any 'hover' info available either on the filmstrip or the library thumbnails. How useful would it be to be able to hover over a thumbnail and get basic info like filename, date, f-stop, ISO, shutter speed, etc. As far as I can see, there is no way of seeing this in LR without clicking (selecting) the image concerned. Again, C1 shines here.
So, as I will not use the slideshow or web modules, I'm stuck with my existing workflow, but will use LR purely for organising my images, i.e. I will use the library module only.
I really had higher hopes of how I would use LR, but maybe future versions will improve and get the missing 'popular feature requests' implemented.

I posted in the external raw conversion about LR versus C1 in bw conversions. After reading imacken post perhaps I am simply setting the sharpness wrong. In my recent experience I found the LR files sharper than C1 but there were differences in the mottling of the background (8 bit files) My useage may be different. I mostly shoot fashion and on a given day I will shoot 500 to up to 1000 frames (if the story is slow to come and my brain just can't find the right thread). I will cut down to 100 frames, rough cut the story, then re-touch, burn -dodge-balance about 20 in PS. Imacken have you found more colour detail from c1 vs LR (please read the below post to see my comparison test)
I do so much post work, including sharpen, that PS is always my finisher. I only sharpen at the the end when I know the final image size required. I use the print function to generate contact sheets as i sometimes like to output thumbnails to help with my final edits and I send proofs to my crew by making quick web-sites with LR or PS.
My gripe with LR is speed. I am running a 2 Ghz imac and at times I get frustrated by the speed of LR processors and have been wondering about more ram or getting a faster mac . My Library is about 16,000 images at this point. Wondering what will happen when this doubles or triples.
I recently did a story where my final files were BW or very de-saturated colour files. I set the LR files up as I wanted them to be in the final look which was a very hi-contrast, say a 3 to 3.5 in paper terms then exported as psd's to re-touch. They ended up being soft and mottled in the greys. Same results from C1 though a touch sharper than LR. In the end though, the best results was to rip a neutral colour file out of LR then convert in PS. I use imaging factories convert to bw pro as I like the interface for my conversions.
I am still running the last Beta. Is there a way to do multiple setting on one image and keep all the variation up where I can see them? I sometimes rip a file twice for hi-lights then shadow detail. This last job i had to rip my contacts in BW then bring back to colour to rip to PS so as not to lose detail in the image.
I posted the four files here (un-re-touched or final balance)
http://closer-to-truth.com/raw-pro-test.jpg

Can't install the software for the Brother MFC-9440CN because it is not currently available from the Software Update server....how do I get the driver then..it ised to work in my old mac..but cant print to it in my new unit

Can't install the software for the Brother MFC-9440CN because it is not currently available from the Software Update server....how do I get the driver then..it ised to work in my old mac..but cant print to it in my new unit

Download the Brother Mountain Lion drivers here.

Can not input data when removed the value for seleciton condition

Dear Experts,
We met a very strange issue for the IP.
We create a aggregation level and relatd query for user to key in data.
We have a filter in the aggregation level.
It will set value for A,B,C,D
When user opent he report, system will require user to key in the value for A,B,C,D.
Now we found that if we key in value for B, cell is input ready.
If we removed the value in for the B in the selection condition (I mean the value of B is empty, this means tha all the value of B will display in the report), we can not key in data.
Could you kindly let me kow the reason?
Thanks and best regards
Alex yang

Dear Experts,
Many thanks for your information.
I know the principle for the IP.
But I think you may misunderstanding this issue due to my incorrect explaination.
First, we think the aggreagtion level is ok. This is due to that for the B in my example, we set its as column value in the query.
This is means for each record in the IP query, it has only one B value to reflect it.
But strange things is that if we set fixed value for B, IP input is ok.
If we removed fixed value for B, IP function is error.
Now, we will test if we key in multi value for B whether IP input function is ok or not.
Any update, I will inform you.
Thanks and best regards
Alex yang

Is the 30" for me?

Similar Messages

Maybe you are looking for