Is the 4G data problem on the Galaxy Nexus going to be fixed?

Whether or not it's a software or hardware problem something needs to be done. I've been a 5 different forums now and everything I read about the 4G on this phone is negative, except for a few lucky ones. People are only getting 1-2 bars compared to other phones right next to them. They are also saying they are getting heavy decrease in 4G speeds. This is my first 4G phone but I think I would get better speeds than 4mbps download and 3mbps upload? I'm in Pittsburgh, a good 4G area. I've been a customer with VZW for a long time, plenty of upgrades and new 2 year contracts. I just dropped a lot of money on this phone and agreed to stay with VZW for another 2 years, I at least want a phone that is fully capable of getting the full 4G experience. If there is a problem with the Nexus as a device in general please let us know see I can get a different phone, if there is something wrong with the 4G let me know too so I can quit panicking!
Sorry for rambling on but what is truly going on with this phone and the 3G/4G speeds, dropped calls and so on? I'm really getting aggravated and truly feel like I'm unappreciated as a customer.

It seems more location based than actually the device.  I have various screenshots where I could go hours without even a dropped signal, but randomly for an short period of time I would lose signal due to the network(based on various devices owned with Verizon).  Though when I travel to say SF for work I may see it happen 2-3 times a day.  When I was with AT&T many years back when they were rolling out their 3G network I had similar problems with dropped calls, and data.  Since Verizon is deploying it quickly I doubt they did serious bug checking and figure to do it on the fly as they want to cover everywhere that has 3G with 4G.  At some point I believe Verizon want to go VOLTE+(Voice over LTE Advanced) which in turn may help with data prices and network congestions and hopefully they can get it as reliable as possible.

Similar Messages

  • After reading the Note 3 problems. How is this going to be fixed and when.

    After finding other people were having the same issue I was with my note 3. No help from customer service. Have the issues been fixed on the New Note 4 that soon to be released? As for the cost of having a Verizon account with 6 phones for over $400 a month with 10g to share. Everyone says this is crazy and we have been a loyal customer for over 12yrs. I think we are switching after this. bad reception and bad phones. So much inconvenience when they have to send a refurbished phone. Dropped calls and no bars this has been the worst phone I have had. My husband has the S5 and gets a little  better reception and picture quality and I paid $700 for what??? Oh its on the edge....I have tried everything to make this phone work. Since the update it stinks. Friends of mine with the news are thinking of doing a segment on this and service. Verizon is the most expensive and service and quality has gone way down hill .
    So what do we do?

    Agreed.  I would have to think it's just a matter of time before word gets out and they start losing customers.  The network "upgrade" was definitely a bad move.  They should have just built on to their existing network and not acquired someone else's garbage spectrum.  Way to take a step back!  I thought Verizon was the leader in fewest dropped calls.  Not for long!  I wonder how dropped calls get reported?  Oh wait...it wouldn't technically be considered a dropped call if you couldn't make the call in the first place.
    Sorry for being so negative.  But, you would think that having a top-tier phone, we wouldn't have these issues.
    I am so frustrated with this.  I have been looking at prices on the other carriers over the past month or two, where before I would never think of that because I valued the reliability of Verizon too much.  Now, there is nothing to keep customers from fleeing Verizon, especially when they charge more than anyone else out there.

  • Will apple next update to help fix the location following data problems will the ipod touch 2g be included ?

    will apple next update to help fix the location following data problems will the ipod touch 2g be included ?

    Chances are the 2g itouch will not be included in the update. Also no one yet knows if it will be fixed in the next firmware but apple has said they know of this bug.

  • Using Itunes, I copied all my apps from my Ipod touch to a new Iphone 4. Problem is all the apps on the Iphone are starting up like a new install. I would think my "password" app and "lose it" app would have the past data transferred to the Iphone.

    Using Itunes, I copied all my apps from my Ipod touch to a new Iphone 4. Problem is all the apps on the Iphone are starting up like a new install. I would think my "password" app and "lose it" app would have the past data transferred to the Iphone. Is this not possible??

    Try this Discussion...
    https://discussions.apple.com/message/19529357#19529357

  • There was a problem reading the layer data. Read the composite data instead?

    I can't open my psd with properly in Photoshop, it keeps showing :There was a problem reading the layer data. Read the composite data instead? 
    Photoshop cc
    Help please

    I just discovered this issue. Apparently if your PSD document has a tonne of layers, it will save normally. Then suppose you are working on it one day, and create lots of new additional layers...saving that will then corrupt the PSD file, as apparently the number of layers exceeds some hidden limit. You will not be able to load that back in, as Photoshop doesn't appear to allow you to do that.This issue appears for both PSD & PSB files. I lost a few weeks of updates, but recovered thanks to a few backups.
    One clue you can use to ensure you don't inadvertently save over the file (thereby corrupting it), is to try duplicating a layer or a group of layers. You will not have the option to do so. If you encounter that, immediately open a new file, and drag a few groups of layers to the new document (and deleting them in the original document). You should then go back below the 'limit', allowing you to save normally.
    As for the original corrupted file, well I tried repairing it with a whole host of tools. But nothing worked ....
    MacReady: Any way we can we fix it?
    Garry: It's gone, MacReady.

  • All the message dates in the message list changed in every mailbox to a recent date, I don't know why.. The dates within the messages' headlines themselves remained correct.  How do I re-establish the correct dates also in the mailboxes' message list?

    All the message dates in the message list changed in every mailbox to a recent date, I don't know why.. The dates within the messages' headlines themselves remained correct.  How do I re-establish the correct dates also in the mailboxes' message list?

    First thing is to forget all the complex configs and just try to schedule the report to run once now, no alerts, no notifications, no nothing.
    Does that work?
    Then you can build up the schedule, to see where the problem is coming from.
    Sincerely,
    Ted Ueda

  • How to set the Reverse date to be the same as the Actual GI date by default

    Hello,
    On VL09 (reverse goods movement) screen, default reversal date is the system date.
    Users have to select the line, click on define date button and enter the correct cancellation date to the local date field on the pop-up.
    I want the reversal date on VL09 screen to be the same as the Actual GI date by default.
    Thank you.

    Hi,
    I checked the program.
    Check in routine FORM insert_data_for_reversal  --->  IF Condition (( xlikpukwa-wbstk EQ charc AND xlikpukwa-vbtyp CA vbtyp_lief ) OR  ( xlikpukwa-wbstk CA 'BC'  AND xlikpukwa-vbtyp CA vbtyp_liav ). ---> 2 performs are there one with '01' and other with '02' as actual parameters.
    In your case '01' is passing to the routine. if you try to pass '02' u can achive your requirement.
    For testing in debug mode pass FIELDS-FIELD_ATTR = '02' for field name DATLO. then you can see the output.
    Try to handle this problem using Enhancement Operations.
    Hope this helps you.
    Thanks
    Raghavendra

  • Final issue indicator on the general data button on the work order

    Hi Gurus,
    can anybody please let me know why the final issue check box is checked automatically even before the goods are issued via migo against the work orders. This check box is on the general data tab of the material entered on the components tab of the work order. Please help. As a result of this, the store room clerk cannot issue the material againsth the work order, because this check mark is checked. I want to understand what is causing the check mark to be checked automaticallu even before tthe materials are issued out
    Thanks
    ANusa

    Hello!
    This might have occured due to completion confirmation of order before goods issue. Generally this happens if final issue indicator is set as default in completion confirmation tab. Please check and reply if problem is something else.
    Regards,
    Vaibhav Mishra
    Edited by: Mishra_Vaibhav on Jan 27, 2011 5:23 AM

  • Checking the master data automatically before the payroll run...

    Hi Friends,
    Can anyone tell me that, is it possible to check the master data automatically before the payroll run.
    If any user forget to maintain any important info-type ( like Cost Distribution ) in time of master data maintenance, SAP allow the Payroll system to run the payroll for that employee. Only in time of account posting the user is able to know the problem and due to rectify the problem they have to delete the payroll.
    So, I therefore wants to know that is there any check point or can customized any such things, which will check the necessary info-types before running payroll and generate an error massage about the missing info-type and also skip the processing for that person.
    With regards,
    Diptendu

    have
    a look at this report
    but before that make sure wht are the mandatory infotypes that are maintained to the employee so that u can come to an idea what are infotypes that are maintained for the memployee
    se 38   HTWLINFO  read the documentation of the is report mmight be useful

  • Why are your Data Plans SO SCREWED UP? You are Unfairly making the average data user Subsidize the Big Data Users. This kind of thing is why I left AT

    Why are your Data Plans SO SCREWED UP? You are Unfairly making the average data user Subsidize the Big Data Users. This kind of thing is why I left AT&T and came to Verizon a Decade ago. Their plans sound better now, maybe I should go back.

    I currently have 5 phones/lines. 2 Droid MAXX phones, a Samsung Galaxy S5 phone and 2 basic phones (4+ year old Motorola & Samsung). The cost for each line rose considerably and usage fees more than doubled on the 2 basic phones when I upgraded the 3 smartphones at the beginning of this year and Had to Convert from my old Unlimited Family Plan to the Newer Share Everything Plan. My Data Usage varies a lot due to occasional travel which I have little control over. At least you recently began including a $10 deduction on each of the 2 older phones (which I have not updated in order to save money though they need updating). My Sweet Spot on Data would be around 6GB Monthly Data. But that level is not offered. Only 2, 3, 4, 10, or 15 GB plans are offered.
    Verizon's Data Plans Offered Are:  2GB-$50/MO = $25/GB  *   3GB-$60/MO = $20/GB   *   4GB-$70/MO = $17.50/GB   *  10GB-$80/MO = $8/GB   *  15GB-$100/MO =  $6.66/GB   *   And Overages are Charged at $15 per 1k-1GB.
    Offers JUMP From 4GB TO 10GB (There's a 6GB GAP/JUMP - ***) - Why is there NO 6 or 8 GB offering?  Because Verizon is Overcharging the Lower Data Users!  Seems like All of the Other Cellular companies are Offering Better Deals.
    If you can offer something better please let me know, otherwise I may have to consider going back to AT&T or moving to one of the other cellular companies.

  • Having arranged some scanned pictures in an album in I-Photo how can I keep them in the order I have chosen when I move the album. They all have the scan date and not the taken date and move to new positions if I move them from one album to another.

    Having arranged some scanned pictures in an album in I-Photo how can I keep them in the order I have chosen when I move the album. They all have the scan date and not the taken date and move to new positions if I move them from one album to another.
    Is there any way to re-number them in the order I have chosen so that they can then be sorted by number? The scans are all from pre-digital images that I wish to move to a photobook and I don't want to have to organise them twice!
    Thanks for any suggestions.

    I was a bit short, Chris, sorry. It is limited, what can be posted, when typing on an iPad.
    Now I am back on my Mac. I meant the following:  Batch Change the date for a large range of photos, that should have a date stepped in increments.
    Select all Photos at once and use the command "Photos > Batch Change".
    Then set the date for the first photo and select an increment, e.g. one minute.
    Now all photos will get a new date assigned, incremented by one minute, in the sequence you have selected. So you will be able to sort them by date.  This way it will be unnecessary to change the titles or filenames.

  • I managed to transfer the music from 1 pc to 1 other pc (to be played by iTunes). Bit didn't fixe the transfer of the meta data (for example the rating). Does anyone know how to use your old playlists, etc..(= meta data) on the other PC? So, please help!

    I managed to transfer the music from 1 pc to 1 other pc (it is played perfectly on the other PC (Windows 7- pc) by the newly downloaded and installed iTunes, version 10.6.1.7). But I didn’t fix the transfer of the meta data (for example the rating). Does anyone know how to use (or import) your old playlists, etc..(= meta data) on the other PC? So, short: how to migrate the meta data from one pc to an other pc?
    It's a pity that it seems not to be possible to import on the new pc e.g. the ratings!!!
    I don't want to start again with rating my (beautiful classical) music!
    Thanks, from Amsterdam, NL

    Did you do the move via Home Sharing, astro?
    If so, perhaps try the instructions from the following post:
    Re: i transfered itunes to my pc playlists did not go

  • Config sync:error: Folder is no longer part of the system data source or the folder not found

    This is the message I am getting when i try to configure synchronization through intellisync in all functions.  Any ideas?
    Folder is no longer part of the system data source or the folder not found
    JT

    jtwilcox wrote:
    Mail account is MAPI
    XP
    Outlook 2007
    thanks for your help so far!
    JT
    Hi...
    Based upon the folder error, my guess is the Desktop Manager is having difficulty determining your default mail client. I am not sure why but it is easy enough to redo a profile in Outlook just to test this. (Control Panel / Mail)
    Of course, I would backup my PST file prior to doing this and then create a new profile and import the PST file into the new profile. Once the profile is running and tested ok, I would again go to the Control Panel / Mail and set the default profile to point to the newly created profile. Then run the Desktop Manager and see what happens....
    H.
    +++++++++++++++++++++++++++++++++++++++++++++++++
    If successful in helping you, please give me kudos in my post.
    Please mark the post that solved it for you!
    Thank you!
    Best Regards
    hmeister

  • Schedule a report with the system date imbeded in the file name

    Hello,
    Could anyone tell me how I can schedule a crystal report with the system date imbedded in the file name (FileNameYYYYMMDD) through BOE?  When I scheduled the report through BOE, I gave a file name and selected Attach Date Time, but the file name is coming out slightly differently and with the time imbedded as well (FileNameYYYY-MM-DD-HH-MN I think). Is there a way to change the default system date time format in BOE so that the date stamp comes out the way we want it?
    Thanks!

    %SI_STARTTIME% will add the time the report ran too.
    Adding onlt the date will necessarily have to be done via the appropriate SDK.

  • Differences between the Portal Data Collector and the Activity Data Collect

    Hello,
    I want to know what are the differences between the Portal Data Collector and the Activity Data Collector?
    Best Regards.
    Pablo Mortera.

    All of my SQL Server instances  are sql server 2008r2 standard edition(10.50.2500). MDW is existing database, I try to setup collection sets for multiple instances and store data in one central MDW database 
    I create MDW in one instance, then run run configure Management Data Warehouse in target intance. collection sets were created successfully, but job failed with following error:
    Executed as user: COCAD\INTDEPT01SQLAgentC10. The Management Data Warehouse version "00.00.0000.00" is not supported by the current data collector. Please upgrade the Management Data Warehouse by running the Management Data Warehouse Configuration
    Wizard.  Process Exit Code 5.  The step failed.
    Thanks
    PAULqaz

Maybe you are looking for