Is the 82c55 ic available in multisim if yes where it is ????

is the 82c55 ic available in multisim if yes where it is ????

Hi,
This component is not available in Multisim, however you can use the Component Wizard in order to create a custom component.
Here is a tutorial on component creation:
Creating a Custom Component in NI Multisim
I hope this helps.
Fernando D.
National Instruments

Similar Messages

Where is the AC analysis option in Multisim 10.0?

I have seen that its supposedly under the 'Simulate' --> 'Analyses' Menu, but my 'Simulate' menu does not have an 'Analyses' option. What is going on??????????

Hello,
What is your Multisim version/edition? (Help>>About Multisim).
The SPICE Analyses feature is not available in Multisim Base Edition. Please take a look of the following table:
NI Multisim SPICE Analyses
Regards,
Fernando D.
National Instruments

Is the "Lead Time" available in CRM?

Hello,
I need the "Lead Time" for products available in CRM, but I am not a logistics expert. Does anyone know if and how the lead-time can be retrieved?
Behind "Lead-Time" is a quite huge caluculation process and it would be great if anyone knows a transaction or more important a function module, which already handles everything? IN the best case a module in CRM otherwise directly ERP.
Thank you for any help,
Regards,
Andreas

Hi,
This component is not available in Multisim, however you can use the Component Wizard in order to create a custom component.
Here is a tutorial on component creation:
Creating a Custom Component in NI Multisim
I hope this helps.
Fernando D.
National Instruments

What are the standard Solutions available for Complaints Management in CRM?

Dear all,
What are the standard solutions available in SAP CRM to receive and process complaints through Customer Interaction Center.
Our requirement is to receive and register complaints from contact center and process them by integrating back end ECC and BIW systems.
As per my understanding we can not integrate ECC transactions in CASE Management while CASES are being created through Interaction Center.
Please help me to map the following requirement successfully into SAP.
How to register the complaint through Interaction Center?
How this complaint information is communicated in back end ECC system?
How to track the status and solution of the complaint available in back end ECC system?
How the complaints are stored in ECC system?
After creation of a complaint, can we trigger an automatic email on back end ECC system user with all complaint relevant data?
Kindly help me to understand the process.
Best regards,
Raghu ram.

You can analyse this [link |http://help.sap.com/saphelp_crm60/helpdata/en/68/691976cd2ef845a4e62437a82b67df/frameset.htm]for more information. Additionaly the tree hierarchy links contain some process flows where it explains you briefly the big picture of the process, in standard SAP CRM Complaint Manaagement Scenario.
BR,
Cenk Sezgin

I can't save my picture to .jpeg in CameraRaw, the only format available is .dng. Why??

I want to save my pictures to .jpeg in CameraRaw, but the only format available is .dng. I have to open the picture in Elements 12 just to save as .jpeg. Why??

Because the ACR module is meant to convert the raw data into an image format that the editor can read. From the editor (or the organizer) you can save your raw files to image files formats like jpeg, tiff or psd. Simply click the 'Open in editor' button.
For batch conversion to jpeg, either use the 'process multiple files' option in the file menu of the editor, or select several raws in the organizer and export to a new location in the desired format.
The option to 'save' as DNG may be used if you want to convert to the raw DNG format. You don't need to use that feature.
I highly recommend you take the time to read the help file (Help button in the camera raw dialog).

How do I use a font variation in a pages document. I no longer have the "viewer" -glyph option in special characters pane only new mbPro with Lion. I know the variation is available because I can see it in the font book. so now what I just want to be

How do I use a font variation in a pages document? or other app for that matter? I no longer have the "viewer" - glyph option in the special characters pane (under edit in toolbar). I know the varaition ia available because I can see it in my font book. I depended on that alot so I need to find a way to still use character and embellishments. I don't want to have to go back to my od computer (from2007) Please Help!

I really don't understand.
The menu item is available :
Maybe, you didn't activate the tool :
Yvan KOENIG (VALLAURIS, France) mardi 2 août 2011 23:10:17
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

Edu DVD in computer iTunes but does not show up in iPad iTunes or iPad video. How do I make the DVD contents available on the iPad?

Educational DVD added successfully to computer iTunes but does not show up in iPad iTunes or iPad video. How do I make the DVD contents available on the iPad?

Thanks! For whatever bizarre reason for which I have no answer - I sync'd my iPad to my MBP the old fashion way (not iCloud) and the movie showed up just fine. It is Nikon camera 'how to' video. I like to watch them for a better indepth discovery of what the camera can do. The only weird thing about the hard wire sync is that it was placed in a catagory "home movies" which was never there before...actually it showed up in two places "home movies" and TV shows.
So, thanks anyway! Pretty cat!
Mona

HT204149 What is the maximum resolution available for use with the Apple Mini DisplayPort to Dual-Link DVI adapter?

What is the maximum resolution available for use with the Apple Mini DisplayPort to Dual-Link DVI adapter?

Hey guys,
I found out an answer by myself...
The missing link : the MacBook Pro needs to be powered... as in you need to plug the charger in...
In conclusion, you simply plug everything, turn on the MacBook Pro, close the lid, and there you go !

I am trying to install windows 7 on my macbook pro 13", when i run bootcamp it tells me that there is not a windows support software available for my computer. Where can i get the windows support software for my macbook?

I am trying to install windows 7 on my macbook pro 13", when i run bootcamp it tells me that there is not a windows support software available for my computer. Where can i get the windows support software for my macbook?

Apple only supports Windows on certain hardware.
http://www.apple.com/support/bootcamp/
Apple provides their framework for Windows to run on a Mac, a piece of software called a Hybrid MBR that bridges the gap between how Windows reads the drive partition table (MBR) and EFI/GUID partition table that Mac's use.
It doesn't mean Windows can't run on your Mac, a third party solution called rEFIt will also bridge the gap and allow booting of more that just Windows, Linux as well for a triple booting computer.
Your hardware has to meet the other requirements the second and third operating system needs as as being able to install drivers that will work for your hardware, especially the fans or they will run loud and fast by default.
http://refit.sourceforge.net/
This above is a advanced procedure which requires knowledge how computers and various operating systems, drive formats and so forth work.
I even admit I don't know everything myself, but I experiment on a separate piece of Mac hardware (out of warranty/AppleCare) designed for this purpose so in case something screws up I'm not taking down my only machine and can use the other to get online and find solutions.
There is a very high potential for losing your data if your using advanced/non-Apple methods to install Windows on your only Mac where Apple doesn't support it. Also one shouldn't be doing this on Mac hardware that is under AppleCare or warranty as it might be voided. Proceed at your own risk and education.

Schedule Line Date Showing in future in Sales Order though the Stock is available in system on same date

Hello All,
Good Morning,
We have received an Incident where in the Sales Order during the ATP Check we do user is getting the future schedule line date in future as enclosed in the screen shot below. User has created the Sales Order on 12052014 for 7 line items. For the Line Item 7 the Stock is available in the system on same day but still after ATP Check the date is shown in future.
I wan to replicate the scenario in Quality to find the exact bug to fix the Issue but not able to replicate for same customer and material i am getting the current date as confirmed delivery date. please guide me if you can share some inputs so that i can go in right direct and fix the issue.
Please respond it is critical Issue.
Thanks,
Farhan.

Hello All Experts,
Many Thanks for all the Inputs you have given.
Finally we have replicated the Issue in Quality 2 Days Back and Indeed it was great Achievement.
Finally We have given to Abaper to debug it find the root cause.
Let me summarise the actual Issue.
Issue : Sales Order Schedule Line showing future date for the Materials which are having Product Allocation even though the Stock is available and Allocation Qty also available in the PA Master Data we maintained..
We created one Sales Order for Line Item A and B. Line Item A is having Product Allocation. When we created Sales Order for both Line Item A and B we got Schedule Line Date as 13.06.2014. Then we Schedule the Re-Scheduling Job in V_V2 and check the effect. For Line Item A the Schedule Line Date got changed to 01.07.2014 and Line Item B it was same as before.
Would like to know is there any config setting at Schedule Line Level we have missed just want to cross check if there is any or something in Product Allocation Configuration.
Please refer screen shots below for more details of Sales Order before and after effect in Re-Scheduling.
Please provide your inputs on this.
Thanks,
Farhan.

How can I import data in to the digital word generator in Multisim?

How can I import data in to the digital word generator in Multisim?
I just received this comment from a friend, a RADAR engineer, who has just down loaded Multisim. He has been using HP/Agilent software. He has a work around using a piecewise linear voltage waveform with data imported from Excel but this is not really a good solution. It would also be helpful to import data from Mathcad or equivalent.
"I thought I was about to be impressed with MultiSim but it ended only in disappointment. There is a word generator in the simulation instrument panel which can drive the DAC with a waveform and it can have thousands of lines of values. I opened Excel, wrote the formula to generate the time and voltage points for a chirp, converted to DAC values in Hex and then went back to the word generator in MultiSim to load the values only to find that you have to enter each value manually. It doesn’t even allow you to paste in a list of values from a text file. I’m not going to type 5000 values by hand. If you get the chance to give feedback to National Instruments please ask them if the paste option can be added to the word generator. MultiSim is useful in many regards, but in this case, it left me with the impression that it is considerably limited in capability compared to what I’m used to."

Hi,
You can load your data automatically in the Multisim word generator. Follow these steps:
- Save your data file (in excel .xslx ir .csv format) on your computer
- Change the extension of the file to ".dp"
- Double-click the word generator in Multisim and click on Set...
- In the Settings dialog box, click on Load and then Accept
- This will prompt you to select the .dp file you have on your computer, select it and you're good to go
However, in Multisim you have the option of creating your own custom simulation analysis and instrument.
I will try creating the instrument and send it back to you but it might take some time.
Multisim and LabVIEW are very powerful in test automation, with the custom instruments you create for Multisim you don't need to export your data file into excel from LabVIEW (or MathCAD or other tools) and then reload it into Multisim. The test procedure is automated instead.
Please check this reference design about automated simulation
http://zone.ni.com/devzone/cda/tut/p/id/7825
Here is how you can create your own custom measurement tool in Multisim and LabVIEW, but as I mentioned, I will create the word generator and come back to you anyways
http://zone.ni.com/devzone/cda/tut/p/id/5635
Let me know if you have any questions.
Mahmoud W
National Instruments

I have an older I Mac operating system 10.6.8 and want to upgrade. I've been told that the only upgrade available for my machine is 10.7.5. On what website can I find this upgrade or how do I find this upgrade on the Apple website?

I have an older I Mac operating system 10.6.8 and want to upgrade. I've been told that the only upgrade available for my machine is 10.7.5. On what website can I find this upgrade or how do I find this upgrade on the Apple website?

Choose About this Mac from the Apple menu, check if the computer has at least a Xeon or Core 2 Duo(not Core Duo) CPU and 2GB of RAM, and if it does, click here and order a download code for Lion 10.7.
Back up your data and check your applications for compatibility before upgrading. In particular, Mac OS X 10.7 and newer don't support PowerPC programs such as versions of Microsoft Office prior to 2008.
(116475)

How can I connect my iPad to a TV that only has an s-video input available but also has a usb port on the satellite box available.

I would like to connect my iPad to my older TV but the only inputs available are the s-video input port on the TV itself and there is also a USB input port on the satellite box that feeds the TV. I could also split all the RCA jacks to accomodate another input here. Thanks in advance for any and all help with this problem of mine..............RR.

There is no s-video cable available for any iPad.
The USB port on the cable box is for maintenance use only.
There are RCA cables available:
http://store.apple.com/us/product/MC748ZM/A/apple-composite-av-cable?fnode=3a

I need to reinstall my Canon Pixma Pro 9500 MK 2 printer on my iMac running Mavericks. It looks for software but Apple cannot find. The driver is available on my computer. Is there a way I can force the installer to use the available driver?

I need to reinstall my Canon Pixma Pro 9500 MK 2 printer on my iMac running Mavericks. It looks for software but Apple cannot find. The driver is available on my computer. Is there a way I can force the installer to use the available driver?

I need to reinstall my Canon Pixma Pro 9500 MK 2 printer on my iMac running Mavericks. It looks for software but Apple cannot find. The driver is available on my computer. Is there a way I can force the installer to use the available driver?

How can I connect my 2009 Mac Mini to a TV that only has the Component inputs available? My Mac Mini has a Mini DisplayPort and Mini-DVI port. Thanks.

How can I connect my 2009 Mac Mini to a TV that only has the Component inputs available? My Mac Mini has a Mini DisplayPort and Mini-DVI port. Thanks.

Composite is analogue with one connector. That is why it is called composite
Component is analogue with three connections. I think one for each color
Here is the one for component. I misread composite for component
http://www.amazon.com/DVI-I-Component-DisplayPort-Female-Adapter/dp/B003OBOJC2

Is the 82c55 ic available in multisim if yes where it is ????

Similar Messages

Maybe you are looking for