Is the Aardvark OEM I2C Host Adapter supported with Labview?

Hi All,
I am now looking forward to use Aardvark OEM I2C Host Adapter (http://www.totalphase.com/products/aardvark-oem-i2c/)
in LabView2013.
Question:
Is this device supported with LabView?
How can I use this device?
Best Thanks,
Jessie

Yes
We have plan to buy and use Aardvark OEM I2C Host Adapter and use it with LabView2013.
I am searching if this device already has LabView VI's for I2C communication.
I am not sure If we can use the VI's for Aardvark I2C/SPI Host Adapter to Aardvark OEM I2C Host Adapter.
Before we decide to buy Aardvark OEM I2C Host Adapter we just want to make sure that we can use it.
Best Thanks.
Jessie

Similar Messages

Is Illustrator host adapter support available for HTML5 extensions?

From what I can see in the extension builder 3 install, a JavaScript host adpater interface is only available for Photoshop. Is this correct? If so, is there a timeline for the availability of host adapter support for Illustrator? This is a critical need for us to be able to transition our Extensions from the Flex framework to the new HTML5 framework.

From what I can see in the extension builder 3 install, a JavaScript host adpater interface is only available for Photoshop. Is this correct? If so, is there a timeline for the availability of host adapter support for Illustrator? This is a critical need for us to be able to transition our Extensions from the Flex framework to the new HTML5 framework.

Does the "Mini DisplayPort to VGA Adapter" work with all Samsung tv models?

Does the "Mini DisplayPort to VGA Adapter" work with all Samsung tv models?

It's a VGA adapter. Nothing special about that. If your Samsung monitor supports VGA then it will work.
But why not go completely digital and use a Mini DisplayPort to HDMI adapter to skip the analog conversion? It also supports passing audio over HDMI.
About Mini DisplayPort to HDMI adapters

Will the lightning to 30 pin adapter work with the irig midi interface?

will the lightning to 30 pin adapter work with the irig midi interface? Want to record guitar with garage band on ipad mini. need quick/easy way to connect USB to ipad mini

From both? Interesting. I like that though. I am looking for the controls to be on the iPhone rather than the stereo as it ***** finding songs this way. And yeah, $39.00 is a lot for this, and it is only roughly 8" long. Oh well, I will need it, so I will have to buy it. Thanks for the message back!

Will the lightening to 30-pin Adapter work with the older camera connection kit on my ipad 4 iPad (4th gen) Wi-Fi, iOS 6

Will the lightening to 30-pin Adapter work with the older camera connection kit on my ipad 4
iPad (4th gen) Wi-Fi, iOS 6

Yes, see my reply to your other post.

I have the error: "failure: datasupp.c line 531" with LabView 5.1.1. Why?

I have the error: "failure: datasupp.c line 531" with LabView 5.1.1. Why?
I use WIN 2000.

Srieng,
The datasupp.c failure can be caused by several reasons, we will need a detailed description of the operation you were making before this error happened, what is inside the VI that gave you this error, has this VI worked before, etc. Please contact us with this information, you can find the steps to email us at www.ni.com/ask , please do so and we'll review the details you send to us to determine the causes and probable workaround. Thanks!...
Nestor Sanchez
Applications Engineer
National Instruments
Nestor
National Instruments

Does the lightning to 30 pin adapter support audio?

I have an iPod touch 5th generation and can't listen to it in the car because the wire from the cars FM transmitter has a 30 pin connection. I was just wondering if the lightning to 30 pin adapter would support the audio.

Hey treshz98,
Thanks for the information, I believe the following article addresses your question:
Lightning to 30-pin Adapter: Using video adapters or other 30-pin accessories
http://support.apple.com/kb/HT5498
When you connect an iPod or iPhone with the Lightning to 30-pin Adapter, the iPod or iPhone will be treated like an iPod that does not support iPod Out. You should still be able to navigate through and play your music using the vehicle's built-in user interface.
Additional information:
Lightning to 30-pin Adapter - Apple Store (U.S.)
http://store.apple.com/us/product/MD823ZM/A/lightning-to-30-pin-adapter?fnode=45
Thanks,
Matt M.

When I plug my iPhone in to my computer with the usb cable that came with the phone the screen says, "Charging is not supported with this device". How can I fix this?

When I use the same cable with the wall adapter it charges just fine.

LOL My situation is the opposite. plug my iPhone 3GS with USB cable and attach to mini adaptor (or whatever the small one is called) and it does not charge. Connect the same iPhone 3GS to my MacBook, using same cable, an charging takes place for iPhone. Then, connected the iPhone to the AC power with the large Apple AC adaptor and it always charges. Seems to be the small adaptor and sometimes a third party automobile adapter.
At first I thought this might be because I was using third party USB cable, but now wonder about that since there are so many problems that others are having.
Having scoured the discussions, it appears no definitive answer has been given. Am I wrong. Maybe I never found the answer to what is happening here.
if you can help, please reply to help all of us with the issue still - June 2011.
Thanks!

Will the lightning to 30-pin adapter work with my 2008 Volkswagen Jetta?

I have a 2008 Volkswagen Jetta that came with an iPod Adapter in the center console. Has anyone recently tried using the lightning to 30-pin adapter with one if they have one? Even if it isn't a VW Jetta? Maybe something older or 2009? I want this and I am getting the iPhone 5 soon, but I don't exactly want to spend the $39.00 to see if this would work. Anyone have any experience or at least know if it would work?
If it does, where are the controls used from; the iPhone or the stereo system in the car still?
Thank you in advance.
Kyle

From both? Interesting. I like that though. I am looking for the controls to be on the iPhone rather than the stereo as it ***** finding songs this way. And yeah, $39.00 is a lot for this, and it is only roughly 8" long. Oh well, I will need it, so I will have to buy it. Thanks for the message back!

Is the Intel I340-T4 Ethernet card compatible with LabView 8.6?

We are currently looking in to having our LabView program process the output of two Allied Vision cameras, run through a PCI GigE card.
On our old machine (32-bit Vista), we have a PRO/1000 PT Quad working just fine with the LabView interface - and we want to upgrade to a better PC with 64-bit Win 7.
We are under the impression that PRO/1000 PT is not compatible with Win 7, and were looking into either I340 quad-port adapters:
http://ark.intel.com/products/49186/Intel-Ethernet-Server-Adapter-I340-T4
Does anyone have any insight as to the compatibilities of the Intel 82580 controllers with LabView 8.6?

Hi Civa,
Scott here from AVT technical support. You are correct re. that PT card not being Win7 compatible. Here's a link to our current recommendations for NICs and switches.
http://www.alliedvisiontec.com/fileadmin/content/PDF/Support/Application_Notes/Hardware_Selection_fo...
If it's NOT in that list, it doesn't mean it won't work, merely that we haven't tested it and do not know. We do not attempt to test every 3rd party product on the market.
And our testing is typical with AVT SDKs not with Labview, though there are thousands of joint AVT / NI customers, and we'd have heard by now if there were any conflicts, I am confident.
Regards,
Scott

I get the error "Cannot open port" when I want to display the directory content of one FTP servers with LabVIEW's internet toolkit functions. What is the problem? I'm logged on on the server.

Is anyone experimenting this kind of problems or has resolved it? Thanks. I use LabVIEW 6.1 with Windows 98.

Squish,
This forum is for CAN questions. I would strongly urge you to repost your question to the LabVIEW General category and this is a LabVIEW question.
Also, does the FTP Browser shipping example that comes with the Internet Toolkit work? If it does, then I would suggest studying that example. If it does not, then I would suggest reposting your question and giving much more detail about which VI is giving you the error and a general overview of the program.
Randy Hoskin
Applications Engineer
National Instruments
http://www.ni.com/ask

How can I disable or enable the keyboard and fix mouse's position with LaBVIEW?

Hi,
1. I'ld like to disable or enable the keyboard with LabVIEW.
2. I'ld like to fix the mouse's position with LabVIEW.
How can I do it?
Please advise.
Regards
Hork

For the keyboard, you could create a filtering event and discard the key change.
What do you mean by "fix the mouse position"? Warping or stalling the mouse is very bad UI form., the operator should always be in control of the cursor position. Could you explain what you want to do?
LabVIEW Champion . Do more with less code and in less time .

B&R Powerlink Ethernet module support with LabVIEW

Hello Guys,
I wanted to use the B&R Powerlink Ethernet module for one of my industrial applications where in I am planning to use cRIO system for the control but my drives ACOPOS 1022 servo Drive requires this module B&R Powerlink Ethernet module. The link is
http://www.br-automation.com/cps/rde/xchg/br-productcatalogue/hs.xsl/cookies_allowed.htm?caller=prod...
So i wanted to check the compatibility of LabVIEW with this particular module and if there is any option for me to program or atleast communicate with this module directly via LabVIEW? This will help me finalize my system and go ahead and start building.
Looking forward for some responses from everyone who has worked with similar setup.
Thank you so much in advance.
Regards,
Priyank Desai.

Hi,
unfortunatelly servodrives from B&R have no open programming interface, so you can not programm them from LabView.For operating B&R servodrive, B&R CPU is a must. This is because operating system of servodrive and all necessary parameters are stored at B&R CPU to guarantee trouble free run always. B&R serfvodrive ACOPOS is not for "component business".
You can listen and command them, when there is a B&R master CPU and servodrive is configured for that.
Following B&R product are Powerling standalone with no need for CPU:
ACOPOSinverter P74/P84
X20 IO system
X67 IO system
B&R CPU is required for ACOPOSmicro, ACOPOS, ACOPOSmulti ACOPOSm65 servodrive systems.
I suggest to contact local supoort of B&R at your country and they will help you how to connect this drive with LabView.

Does the mini display to vga adapter work with a pc (win 7 64-bit)

Its not a thunderbolt adapter. its a mini display to vga adapter. my hp ency pc has a mini display port next to the hdmi port.

First make sure the mini-displayport is firmly seated. They are a bit "sneaky" in that they look like they are fully in but aren't.
I assume that windows has something similar to the mac Displays system preferences. So you need to check that and set if necessary the proper refresh rate and resolution for the projector.
how do i make it work or is it formated for macs only?
What's "it"? The projector shouldn't care where it gets its vga signal from (when using the proper refresh rate and resolution). The adapter is passive and just converts a digital mini-displayport signal to analog vga to pass over the cable (is the cable ok?). That leaves your laptop. I can't speak about it or its video card. But I have to assume that if it supports mini-displayport it should follow the standards for mini-displayports.

Will the lightning to 30 pin adapter work with ihome

I was wondering if, while using an iPoud Touch 5th Gen, a lightnight to 30pin adapter, and an iHome, would it charge and be able to play music? I saw something saying you won't but i wasn't sure if that was credible. Is there a way to make the iHome work with it if not?

The overview for the adopter says:
This adapter lets you connect devices with a Lightning connector to many of your 30-pin accessories.* Support for analog audio output, USB audio, as well as syncing and charging. Video output not supported.
Thus it supports audio, charging and some other functions but not video
http://store.apple.com/us/product/MD823ZM/A/lightning-to-30-pin-adapter?fnode=72

Is the Aardvark OEM I2C Host Adapter supported with Labview?

Similar Messages

Maybe you are looking for