Is the "ActionScript 2.0 compiler" (mentioned in latest AIR 3.8 beta notes) for AS2 code?

This page says:
"ActionScript 2.0 Compiler: The Actionscript Compiler 2.0 has been incorporated into the AIR SDK 3.8 (named 'AIR SDK 3.8 & Compiler') and retired as a separate download from Adobe Labs on March 14, 2013."
I'm working on an AIR Mobile project where we would probably be saved about 6 months of intensive work if some of our legacy AS2 code could be compiled and run in AIR Mobile for iOS. So if there is actually an "ActionScript 2.0 Compiler" in AIR SDK 3.8, that would be fantastic to hear.
However I suspect that this note has nothing to do with actually "compiling ActionScript 2.0 code"; I suspect this simply refers to version 2.0 of the "ActionScript Compiler". (Which is of course the same as the old "Flex Compiler." Which of course had nothing to do with the "Flex framework".)
Clarification would be appreciated!

Thanks Apocalyptic0n3.
Anton, I was not mixing definitions, Adobe was. AS2 is "ActionScript 2.0". Adobe made a page that says that the "ActionScript 2.0 Compiler" is now included in AIR 3.8. Hence my desire for clarification.

Similar Messages

I have a ipod nano 1st and 2nd generation and am trying to put music on it but every time windows says one of the usb devices attached to this computer has malufunctioned and windows does not recognize it code 43 can someone help me please

i have a ipod nano 1st and 2nd generation and am trying to put music on it but every time windows says one of the usb devices attached to this computer has malufunctioned and windows does not recognize it code 43 can someone help me please

Try putting it into "Disk Mode" http://docs.info.apple.com/article.html?artnum=93651
Then with it in this mode connect it to the PC and try to run the latest iPod updater to do a restore and update software if you have the option. the latest iPod updater is 2006-03-23 and can be downloaded here http://www.apple.com/ipod/download/

Compiling Errors with latest air sdk

Not sure if any is having similar issues but here it is:
Using latest Apache Flex SDK (4.9.1) -- used the installer.
After that I overlayed the latest AIR SDK (did this three times to make sure I did right -- have done multiple times before)
Updated the application descriptor (with 3.7) and -swf-version=20 in compiler settings.
Now I am getting these errors when compiling (compiling completed 100% successfully before the upgrade).
Any suggestions or solutions would be greatly appreciated (note that I require the mx.controls.HTML class as well as the mx List and mx Canvas classes for very good reason).

Hi,
This article starts with how to overlay AIR SDK's over Flex. http://www.adobe.com/devnet/air/articles/ane-android-devices.html
Please try and update if this will work for you.
Regards,
Nimit

I am trying to use the sudo tmutil disable local on my macbook air but when it asks for my password, I cannot type it in- the letters simply do not appear on my screen-- any solutions??

I am trying to free up space on my macbook air by stopping local backups. I type sudo tmutil disablelocal and it prompts me for my passsword. When I try to type in the password it wont type-- i.e the letters do not apear when I type them-- any suggestions??

Hi there...
For security do not appear in code, but once you hit ENTER it has been passed in Terminal ...careful to write the code properly and kaps lock

How do I remove ITunes and all the associated apps connected with ITunes from IPAD air. I did not ask for the download. It happened when I added a Chrome app.

My IPAD air that I use strictly for work automatically downloaded ITunes installation app and all the usual apps that come on with ITunes such as store, App Store, face time, ect when I downloaded the CHROME app for work. How to I delete all of these?

You can't. Those built in apps are not able to be deleted. The most you can do is to put them on a back menu page or tuck them in a folder.
They didn't come with the chrome app, they were there all along.
You can also go into the restrictions and enable restrictions and turn the apps off, which will make their icons invisible even though the apps will still be on your device.

Can't compile simple project in Air 16/17-beta

I need to update the sdk and all, and did a test.
When updating created a simple design and time to compile the following error occurs:
Anyone have any idea what may be related?
I use this command to compile:
adt -package -target ipa-app-store -provisionig-profile ****.mobileprovision -keystore ****.p12 -storetype pkcs12
****.ipa ****-app.xml ****.swf
It asks for pass and i input, i test too without pass with anothe p12, same error.
And yes, i use provisioning and p12 in distribution mode.
I export swf release mode in windows and compile in Mavericks.
Thanks.
This is the problem of another two peoples i know.
Will be of much help if someone has any guesses

Let me give more details.
I exported the swf in release mode by FB4.6 but as my is the 32-bit
have to build on a machine 64 for the new compiler work, so I thought, since I have the mac and use only to send to App store, so I thought ... I will build there, then this error occurs.
I borrowed a machine with windows 8 64bit and compiled the same swf smoothly, generated just right .ipa in ad hoc mode.
So I agree that changing as you said can run but can be something in the same compilation ... or not?
I do not know if I made myself clear.
Sorry for my poor English.

I see that there are people that have the problem suddenly almeer notes disappear this is with me also happened and now comes the: If I put a backup that I have my back than notes for 30 seconds back and THEN THEY DISAPPEAR again!

i see that there are people that have the problem suddenly all notes disappear :
this is with me also happend and now comes it
when iputa backup that i have back than i kan see the notes voor 30 seconds and than the disappear again!

Hello,
Just to set your expectations...it's fine to "rant" about things here, but I do hope you are not expecting a formal reply from anyone at BlackBerry. For this site is not a channel for any formal communications with, escalations to, nor support from BlackBerry for any purpose whatsoever. Rather, it is a user-to-user community of volunteers who try to help each other out to the best of their abilities. Note this banner, please, posted at the top of nearly every page of the site:
Consequently, words posted such as "WHAT THE HECK IS WRONG WITH YOU?" are actually directed at the other kind volunteers of this site, who may not respond in the most kindly of fashions. Hopefully, we all can understand that your rant is directed at BlackBerry (though, by placing it here, it is misplaced), but I just wanted to gently caution you about such posts, as well as ensure that your expectation concerning replies is properly set. Also, for new members who join the site, it's always good to have responses to such posts, covering the intended use of the site so that those new members can better understand such things.
On the other hand, if you do desire assistance from other users for your issues, you might consider wording your requests in a manner that would motivate a kind volunteer to provide such.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Hello. I just bought an iPod mini and I it says I need a pas code to initiate. The first time I turn it on it worked now it is asking for pass code and I didnt put one on it. What can I do?

I bought an iPod mini and I was able to work on it one night. Now it says I need a 4 digits pass code to initiate and is blocked. What can I do?

You will need to restore your iDevice from the same computer that you most recently synced to.
Read this: http://support.apple.com/kb/ht1212
If you can't do the restore then you will need to try recovery mode.
Read this: http://support.apple.com/kb/ht1808

I have a macbook pro 1175 its a 2006 model which boot camp will work i tried 4.03 but it says this boot camp is not for this machine thats the oldest one i found here please help i have windows 7 32 bit installed but need drivers for the sound

i have a 2006 mackbook pro running windows 7 32 bit i need drivers for the sound and the earliest bootcamp on here is 4.03 my machine says its not for this system please help which version of boot camp can i use

Read this. You need to be running Snow Leopard or later.
http://support.apple.com/kb/ht3986

Unable to publish in Swf format. Get error message: 'Swf compilation failed. Note: Please verify if any of the actionscript keywords is used as user variable name'. Anyone know how to fix?

Unable to publish in Swf format. Get error message reads: 'Swf compilation failed. Note: Please verify if any of the actionscript keywords is used as user variable name'. Anyone know how to fix?

Hi There,
Can you tell me the Operating System and Captivate version you are using?
Also can you confirm if you are getting this issue will this one project or all the projects? Try to copy paste this project on a new blank project and then try to publish.
Regards,
Mayank

When publishing a captivate I get the message "Swf compilation failed. Note: Please verify if any of the actionscript keywords is used as user variable name." and it won't allow me to publish the Captivate, can anyone help?

When publishing a captivate I get the message "Swf compilation failed. Note: Please verify if any of the actionscript keywords is used as user variable name." and it won't allow me to publish the Captivate, can anyone help?

Hi There,
Can you tell me the Operating System and Captivate version you are using?
Also can you confirm if you are getting this issue will this one project or all the projects? Try to copy paste this project on a new blank project and then try to publish.
Regards,
Mayank

How does the ActionScript API, Eclipse IDE, Flex SDK, Cygwin & Flex Builder all communicate??

Whats up Everyone! As you might've immediately recognized from the title of this thread I'm new to developing apps with Flex.....
If I've succesfully set up my development environment (Flex SDK, Eclipse IDE, JAVA SDK, Apache Ant, Flash Player, etc.....) & checked out the source code using Subversion, can I start developing my app using the ActionScript 3 API using Eclipse? & how do those different SDK's & programs communicate? How should they be setup?

If you're willing to buy into the FlexBuilder way of doing things, that's probably the way to go. In this case, you don't really need to worry about anything except FlexBuilder (at least for a while). I don't really have any experience in setting up a project with a server component (I always set 'server type' to 'None' and configure this manually), but other than that, the experience has been (fairly) smooth, and I'm someone who's pretty heavily biased towards the command line. FlexBuilder takes care of most of the Flex compiler options, tracking different SDK versions (I have three different ones installed), offers code completion and navigation tools, etc.
To get some of the terms straight (I'm not sure how familiar you are with these, since you just threw them out there--pardon me if I'm being patronizing):
* the ActionScript API: the function and class definitions built into Flash Player (fl.*) and the Flex standard library (mx.*)
* Eclipse: a Java IDE, the core of FlexBuilder
* Flex SDK: the Flex standard library, the mxml and compc flex compilers, some ant tasks for build automation, etc.
* Cygwin: this does not really have anything to do with Flex specifically, as far as I'm aware--it's a *nix emulation layer for Windows
* FlexBuilder: the Flex IDE from Adobe, built as a plug-in to Eclipse
FlexBuilder is available in standalone (i.e., pre-bundled with Eclipse) and plug-in versions. Both versions include the SDK. If you're just starting out, I would suggest a FlexBuilder standalone trial, and follows some tutorials out there (or, really, just chose "new Flex project" and explore). In this case, you don't really have to worry about installing or configuring anything else to get started.
Note also that for the upcoming Flex 4, FlexBuilder has been renamed Flash Builder (but I would stick with Flex 3.4 or 3.2 right now unless you really likethe bleeding edge).

When i try to open photoshop this shows up Please uninstall and reinstall the product. If this problem still occurs, please contact Adobe technical support for help, and mention the error code shown at the bottom of this screen. Error: 16

i had to take my photoshop file into a hardrive because my dad was going to give me a new Mac and when things didn't work out and went back to my old one i use the time capsule thing to save everything before but didn't give me photoshop so i physically moved the file and tried to open it but then this error shows up
Please uninstall and reinstall the product.
If this problem still occurs, please contact Adobe technical support for help, and mention the error code shown at the bottom of this screen.
Error: 16
and when i click the uninstall app on the file it tells me this
The alias “Uninstall Adobe Photoshop CS6 2” can’t be opened because the original item can’t be found
and when i click fix alias i click on photoshop and the app just turns into photoshop and i just run in circles
please help thank you

Run the cleaner tool and reinstall.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Download CS6 products
Mylenium

How do I put all the songs from a compilation album into the same /album/folder in Itunes v12

How do I put all the songs from a compilation album into the same /album/folder in Itunes v12 i know in other versions it was via get info but as all of the tunes have the same album title , I am not sure what tio change to achieve this ?

I don't see your screenshot but I assume you're starting with something like this, i.e., the compilation split into multiple albums:
If you select all the items that you want to be in a single album, right-click > Get Info you'll see this:
As you say, in iTunes 12 you don't see a field to enter a distinct Album Artist value. You can, however, address this by clicking the Add Field button and selecting Album Artist:
That makes the field available in the metadata dialog so that you can enter the required value:
You can also show the pre-iTunes 12 version of the dialog by holding the SHIFT key when selecting Get Info - this allows you to enter the Album Artist directly:

Can't find the servlets package when compiling

Hi,
My problem is that when I compiling my servlets so can't the compiler find the two packages javax.servlet and javax.servlet.http.
Why?
Please can someone help me with this problem!
HelloServlet.java:2: package javax.servlet does not exist
import javax.servlet.*;
^
HelloServlet.java:3: package javax.servlet.http does not exist
import javax.servlet.http.*;

OK,
It seems like it will work with your proposal to. But now I have a new problem that you maybe can solve for me. That is when I try to test the following (from the book More Servlets and JavaServer Pages):
Test 3: A Servlet That Uses Packages and Utilities
The final servlet you should test to verify the configuration of your server and development environment is one that uses both packages and utility classes. HelloServlet3.java is a servlet in the moreservlets package that uses the ServletUtilities class to simplify the generation of the DOCTYPE (specifies the HTML version--useful when using HTML validators) and HEAD (specifies the title) portions of the HTML page. Those two parts of the page are useful (technically required, in fact), but are tedious to generate with servlet println statements.
Since both the servlet and the utility class are in the moreservlets package, they should go in the moreservlets directory. If you get compilation errors, go back and check your CLASSPATH settings--you most likely forgot to include the top-level development directory. I've said it before, but I'll say it again: your CLASSPATH must include the top-level directory of your package hierarchy before you can compile a packaged class that makes use of another class from the same package. This requirement is not particular to servlets; it is the way packages work on the Java platform in general. Nevertheless, many servlet developers are unaware of this fact, and it is one of the (perhaps the) most common errors beginning developers encounter.
Once you compile HelloServlet3.java (which will automatically cause ServletUtilities.java to be compiled), put HelloServlet3.class and ServletUtilities.class in install_dir/webapps/ROOT/WEB-INF/classes/moreservlets. Then, access the servlet with the URL http://localhost/servlet/moreservlets.HelloServlet3. You should get a simple HTML page that says "Hello (3)".
This works not for me! I will get this message when I try to compile HelloServlet3.java:
C:\Apache-Tomcat-4.1.27\ServletsDevel>javac HelloServlet3.java
HelloServlet3.java:23: cannot resolve symbol
symbol : variable ServletUtilities
location: class moreservlets.HelloServlet3
out.println(ServletUtilities.headWithTitle(title) +
^
1 error
Do you know what the problem is?

Is the "ActionScript 2.0 compiler" (mentioned in latest AIR 3.8 beta notes) for AS2 code?

Similar Messages

Maybe you are looking for