Is the activation of Bridge necessary?

I plan to use Lightroom for most of my image corrections with the exception of some specific areas where I will use Photoshop. With this in mind, is there any advantage to activate Bridge? I'm rather new with these three programs. Any suggestions or information would be most helpful. Thank you.

If you set PS as your outside editor, no need to start Bridge.
Mel

Similar Messages

Beans - Active-x Bridge - Problems!

Hi,
I developed an ip address bean based on JTextField (JDK 1.3.1_02), successfully packaged it as an active-x control using the packager and instructions in the active-x bridge tutorial.
The control has all sorts of problems under visual basic: to name a few:
1. The caret seems to disappear when the control receives focus
2. The tooltips dont seem to show up.
3. The focus lost event does not seem to fire in the control.
Is it worth for me to trace these issues or is the activex bridge not really practically used by anybody ?
Thanks in advance,
Vishy

Vishy,
Did you by any change find a solution to your ActiveX Bridge problem, I'm stuck with the same shit..
Thanks,
Harvey
P.S. Maybe nobody works with this technology except maybe none-visual components?

Hello my name is jose quant, and let me know how I can use CAMERA RAW adobe bridge because the bridge use and want to open a camera raw image, I get a message that says: MAIN BRIDGE aplicaion NOT ACTIVATED. BRIDGE REQUIRES A PARTICULAR PRODUCT HAS BEGUN A

Hello my name is jose quant, and let me know how I can use CAMERA RAW adobe bridge because the bridge use and want to open a camera raw image, I get a message that says: MAIN BRIDGE aplicaion NOT ACTIVATED. BRIDGE REQUIRES A PARTICULAR PRODUCT HAS BEGUN AT LEAST ONCE TO ACTIVATE THIS FEATURE. I wonder what that means?
I use a lapto (windows 7) 64-Bit operating system.
Thank you,
my email is: [email protected], if you send me the answer to my query

You need to activate Photoshop.
Mylenium

Bridge will not now let me use camera raw, though I had been using it every day. It says that "the parent application is not active. Bridge requires that a qualifiying product has been launched at least once to enable this feature." What am I to do?

Bridge will not now let me use camera raw, though I have been using it every day. It ways that "the parent application is not active. Bridge requires that a qualifiying product has been launched at least once to enable this feature." What am I to do?

Usually this points to having some kind of earlier trial version still installed on your system. However without more details you are not likely to find an answer. Try this for a start:
How To Get Help Quickly

In Adobe Bridge when I try to open my camera raws, I get a pop up box stating "Bridges parent application is not active. Bridge requires that a qualifying product has been launched at least once to enable this feature" What do I do? Please advise

In Adobe Bridge, when I try to open my camera raws, I get a pop up stating"Bridges parent application is not active. Bridge requires that a qualifying product has been launced at least once to enable this feature." What the heck? I have a PC and haven't had problems before.. I have adobe cloud and pay my monthly bill...

Have you opened Photoshop or any other Adobe app that Bridge works with? You need to do this if you've upgraded PS or just signed up for CC.

I am having trouble with the cache in bridge. When i open I get a message saying bridge has encountered a problem reading the cache try purging in the central cache to correct the situation. I did that but now when I try to get to the folders where my p

I am having trouble with the cache in bridge. When i open I get a message saying bridge has encountered a problem reading the cache try purging in the central cache to correct the situation. I did that but now when I try to get to the folders where my photos are stored bridge never gets to where I can work. The message appears "building criteria" and I get an endless loop on the lower left panel. How do I correct?

You correct it by leaving Bridge alone until it finishes rebuilding its cache, overnight if necessary.

Good afternoon ladies and gentlemen! My question concerns the impossibility to open RAW-files directly from the program Adobe Bridge. At the moment when you open a RAW-file from Adobe Bridge by double-clicking, RAW-file is opened only in Photoshop. In t

Good afternoon ladies and gentlemen!
My question concerns the impossibility to open RAW-files directly from the program Adobe Bridge. At the moment when you open a RAW-file from Adobe Bridge by double-clicking, RAW-file is opened only in Photoshop. In the settings Adobe Bridge - in "open RAW-files by double-clicking in Adobe Camera Raw» box is checked. When you try any changes in the settings Adobe Bridge system displays a message:
Bridge's parent application is not active. Bridge requires that a qualifying product has been launched at least once to enable this feature.
The entire line of Adobe products on my computer updated to the latest updates. Previously, a family of products Adobe Photoshop on your computer is not set. Computer - PC, Windows 7 Enterprises.

<moved from Adobe Creative Cloud to Bridge General Discussion>

Bridge's parent application is not active. Bridge requires that a qualifying ....

Hi,
After installing CS6, whenever I try to open Camera Raw Preference, I get this error message ....
Bridge's parent application is not active. Bridge requires that a qualifying product has been lauched at least once to enable this feature
Can anybody kindly tell me exactly what this means, and more important, how to fix this problem?
Thank you.

Most of the time it means you have an expired Adobe trial on your computer. Bridge is waiting for it to give command. Find and uninstall the trial.

Minumum and Maximum pointsize in the active document with font name

hi
How to find the font with point size in active document and how to get the minimum point size and maximum point size used in the active document with font name
Thanks in Advance.

Okay, that does look good (without testing it). Does it do its job?
I think it can be made a bit more efficiently by not running over all text frames, but rather over all stories in the document -- a small change, the rest can stay the same.
You can also try turning the gathering of used data around. It appears you are now pushing every item immediately into your array, then weed out duplicates. (For my thoughts on the latter, see below!) It might be quicker and more memory-efficient to scan your present array to see if the new item is already in there, and only push when it's not. (Bonus points for a binary tree implementation -- the fastest possible way! But a linear search on the entire array, or on a sorted array and bailing out if you go "past" the current item, may be fast enough.)
(On Weeding out duplicates; you might want to skip this, as it won't be necessary for the above:)
Your function UniteSame sorts out and removes duplicates by comparing every item to every other one; then it sorts the array. An alternative can be to
1. Sort the array
2. Create a new empty one
3. Push an item of the original onto the new one.
4. Skip items of the original list while they are the same as the bottom one of the new list.
5. Until you run out of items.

Error - Logon not possible; none of the active logon procedures is possible

Dear Gurus,
I'm trying to configure SSL with User mapping to SICF service: NWBC.
-SSL configured with STRUST transaction and I see that it is working via Internet Explorer
-SICF service NWBC was set to: "Required with Client Certificate (SSL)"
-User mapping was set like described in this article: https://help.sap.com/saphelp_nwmobile71/helpdata/en/17/1514e9b7eb4f74b0b49327b8f2a662/frameset.htm
But I get error:
Logon not possible; none of the active logon procedures is possible
Any idea ?
Please advise,
Dimitry Haritonov

Hi,
I would try to check logs first. In transaction SMICM you can set up level of logging for ICF services. So set it up to the highest possible level (this one actually dumps whole content of HTTP request, so maybe that's not necessary) and try logon again. You should get a reasonable info and you can try to figure out why it fails.
Cheers

Is there anything inside Photoshop CC 2014 that functions like the old Mini Bridge?

In previous versions you had the option "open in mini bridge" i understand it has been removed for 2014 but is there anything similar in function?

Not that I know of, but you can run the full version in the background (since it was needed with mini bridge anyway) And use your modifier keys to switch between the two programs. (In windows it is alt-tab) In windows you can also tile the two programs by right clicking on the task bar. Also you can make the bridge window small enough so you can see photoshop while bridge is the active app then you can drag and drop files to photoshop.
Or you can keep both programs full screen and drag the file in bridge to the taskbar over the photoshop icon so that photoshop pops up the drag back up to photoshop and let go. Sounds like a bit of work but is very easy to do and remember to keep that mouse button held down until you have the cursor over the document area of photoshop.
It may not be as pretty or neat but will work.(for now)

How do I install and configure the Java Access Bridge?

I've just installed the Oracle 9i database on this Windows 2000
Pro box with a view to learn what there is to learn about
Oracle. I need to install the Java Access Bridge so that I can
access the Oracle applications. I use a screen reader called
JAWS from Freedom Scientific.
Can anyone please tell me how to install the necessary Access
Bridge components and how to configure things accordingly so
that adaptive software will work correctly with the Oracle
applications.
Adrian

You can do all the networking stuff you need by setting a "bridged" adapter in the VM setup, then configure a valid IP in your guest OS, probably using the same gateway and name servers similar to your host OS.
If you you cannot use a bridged mode adapter because your host network does not support another network card, you can configure a NAT and a host-only adapter in the VM setup as following:
When you configure the network device that corresponds to the NAT device on the on the guest side, set it up to obtain the IP address via DHCP. The NAT device is for outgoing connections to the internet only. VBox will not provide any routing from the outside network to interface behind a NAT device, only via it's own internal DHCP routing.
The host-only adapter is only good for connection between the host and the VM guest. It is primarily designed to provide DHCP like the NAT interface, but does allow a manual configuration, by customizing the "vboxnet0" configuration in the Vbox Network preferences. By default, the IP address range 192.168.56.1 to 192.168.56.100 can be used for manual IP configurations.
It was not mentioned in your requirements, but you need a bridged mode adapter if you want to connect to your guest VM from any other machine beside your host system, e.g. local LAN.

Can I replicate new tables using the ACTIVE STANDBY PAIR replication scheme

Hi,
I have created myself a simple setup using an active/standby pair with a single subscriber like so:
CREATE ACTIVE STANDBY PAIR cie ON "tt-test1", cie ON "tt-test2" RETURN RECEIPT SUBSCRIBER cie on "tt-test3";
I have then added some tables on the master, they did not replicate automatically. I find this:
Command> repschemes;
Replication Scheme Active Standby:
Master Store: CIE on TT-TEST1
Master Store: CIE on TT-TEST2
Master Return Service: Return Receipt
Subscriber Store: CIE on TT-TEST3
Excluded Tables:
ROOT.EXTRACTOR_
ROOT.PROMPT_
ROOT.PREFERABLE_
Included Tables:
List too long (59 items), use verbosity 4 to display
<snip>
My question is ... how do I include these tables in replication?
Do I need to trash and clone the secondary master store and the subscriber again? Even doing that won't add the tables to the replication scheme so I don't think that is a solution.
I couldn't find much documentation on the ALTER REPLICATION statement but from what I could find it requires me to know the 'name' of the replication scheme and the examples in the documentation didn't work when I used 'Active Standby' as the scheme name in the statement.
Am I being retarded here? Is this a limitation of using the ACTIVE STANDBY PAIR replication model?
Thanks in advance.
Huw

When you setup and rollout the ACTIVE/STANDBY pair (or indeed legacy replication) it only includes tables that already exist. The normal deployment process is:
1. Create the first datastore (the one which will initially be the 'active').
2. Create (and populate) all necessary tables.
3. Create the active/standby pair replication scheme.
4. Start the repagent
5. Make the datastore active by calling ttRepStateSet('ACTIVE')
6. Use ttRepAdmin -duplicate to create the standby store from the active
7. Start repagent at standby
8. Use ttRepAdmin -duplicate to create the subscriber store from the standby
7. Start repagent at subscriber
If you need to add/remove tables later you must do the following:
At active node:
1. Create any new tables (and populate them) as needed
2. Stop repagent
3. Execute ALTER ACTIVE STANDBY PAIR with INCLUDE and/or EXCLUDE clauses as required
4. Start repagent
Then you need to redeploy the other stores:
At standby:
5. Stop repagent
6. Drop datastore (ttDestroy)
7. Re-create datastore from active using ttRepAdmin -duplicate
8. Start repagent
At subscriber:
9. Stop repagent
10. Drop datastore (ttDestroy)
11. Re-create datastore from standby using ttRepAdmin -duplicate
12. Start repagent
This is documented in the TimesTen Replication Guide in the section on administering an active/standby pair.
Chris

Anyone get a message saying ipad can not be activated because the activation server is unavailable?

anyone get a message saying ipad can not be activated because the activation server is unavailable?

4 possible causes for that error message:
1] Activation server is actually down. Very rare occurrence, and of short duration when it
does happen. Solution - try again.
2] Your firewall and/or antivirus software are preventing the necessary connection. Solution -
temporarily disable your firewall and/or antivirus software until the activation completes.
3] computer being used for activation has been used to jailbreak an iOS device in the past.
Solution - use a different computer.
4] iPad has been jailbroken. Google may provide some direction, but jailbreaks often prevent
updates from succeeding. Per Terms of Use for this forum, discussion of jailbroken iPads is
prohibited.

Cannot Maintain settlement rule for the activity

Dear All,
I tried to maintain settlement rule in activity under WBS. But it shows message :
You cannot maintain the settlement rule for the activity
Message no. CN006
Diagnosis
The network has header account assignment. You can only maintain settlement rules for the network header.
System Response
Processing stopped.
Procedure
Maintain the settlement rule for the network header.
Please help.
Cheers,
Nies

Hi,
I already tried the config OPUV (network type Parameters) but it shows the activity account assignment already ticket.
If i go to network header and go to settlement rule the warning message shows :
Network has activity account assignment
Message no. CN057
Diagnosis
Costs can only be written to activities for the network whose key you have entered.
System Response
Processing stopped.
Procedure
1. Check whether you have entered the correct key for the network. Change it if necessary.
2. Maintain the key for the network to which you want the costs to be written.
In addition, if i tick the activity under the network header : it shows
You cannot maintain the settlement rule for the activity
Message no. CN006
Diagnosis
The network has header account assignment. You can only maintain settlement rules for the network header.
System Response
Processing stopped.
Procedure
Maintain the settlement rule for the network header.
Cheers,
Nies
Edited by: Nies on Nov 6, 2009 3:26 AM

Is the activation of Bridge necessary?

Similar Messages

Maybe you are looking for