Is the airport express 802.11n used as a booster to enhance your wifi capabilities?

is the airport express 802.11n used as a booster to enhance your wifi capabilities? I was told when purchased that I do not have to connect it physically to the router but it would enhance the wifi capabilities if I placed in a room near the router/dsl? Do I understand this correctly. It never stops flashing yellow?

Any Apple AirPort Base Station (AirPort Extreme, Express, or Time Capsule) can be used to "wirelessly extend" any other Apple AirPort Base Station's wireless network.
They may also be used to "extend" any network created by any other wireless router, if you connect it to that router with an Ethernet cable. The benefit conveyed by connecting it in that manner is commensurate with the distance between the two devices, limited by Ethernet LAN specifications (100m).

Similar Messages

Can I plug in the airPort Express 802.11n Wifi 220 volt power?

can I plug in the airPort Express 802.11n Wifi 220 volt power?

Yes. Its power supply is universal:
100-240V AC, 50-60Hz; input current: 0.2 amp
http://www.apple.com/airportexpress/specs/

Is the Airport Express (802.11n) ADSL2+ compatible

Complete novice, my ISP help page says to check for this.
I went to: http://www.apple.com/airportexpress/specs.html
Unfortunately, there is no mention of ADSL at all.
Can anyone illuminate (make it simple please)?
ps
I previously posted this in the wrong area, then found this one, apologies

The AirPort Express Base Station (AX) is compatible with most modems. However, three things to keep in mind:
o The AX does not have a built-in ADSL/DSL/Cable modem.
o The AX must connect with the modem via Ethernet.
o The AX does not support PPPoA; although it does support PPPoE.

Airport Express 802.11n does not support 5 ghz range

I have a Airport Extreme and a Airport Express both are 802.11n. I have the Airport Extreme setup to 802.11n (5ghz only). The Airport Express 802.11n will not work in the 5ghz range no matter what I do.
If I change the Extreme to 802.11n (2.4 ghz only), and set the Express to 802.11n 2.4ghz, it works fine.
Both systems have been upgraded to the 5.3.1 firmware.
Apple claims the Express works in the 5ghz range. The unit I have does not..so what is the deal?
Steve

I finally got this to work at 5ghz.
BUT,
The Airport Utility that supports the Express is less then great. There is no manual option to set the Express at 5ghz as a client. I assume that Apple will fix this soon.
I also had the problem described in several places in this Discussion group, that the Express becomes un-available after changing the config. I finally just restored it to the default, unplugged it and let it sit overnight. Then I reprogrammed it, saved it, verified it works, then let it sit all day with out unplugging it. I then unplugged it and moved it to the location I wanted it at so I could stream music, and it worked fine at 802.11n/5ghz.

Can connect a mac LAN Airport Express 802.11n to an existing PC's LAN...

Hi. In my company we have a PC wireless LAN with internet routed with DHCP and mac/wep security. Can the Airport Express 802.11n connect it to that network, and share the internet and win network to macs, conforming another intranet...?
Thanks in advance.
Sorry but I'm new in Airport topics.
Enzo.
iMac Intel Core Duo 2Ghz/2GbRam Mac OS X (10.4.8)

The new Airport Extreme can do this.
There is a bridging mode which will simply extend your network to wireless.
You have the option of a backwards compatible 2.4GHz mode. Which will support older WiFi hardware on Macs and PCs.
And there is a faster 5GHz mode which will work with newer Macs (and presumably 802.11n equipped PCs)

After setting up my brand new Airport Express 802.11n and accidentally using it to connect my iMac to the network...my iMac no longer connects through Ethernet? Any ideas...I have tried everything without success!!

I have been using Apple technology for about 10 years starting with 1st generation iPods and our house now includes a 5 year old iMac, all versions of iPods and touches, Apple TVs (both generations) and most recently an iPad 2. I have always told family and friends that Apple technology just works. Unfortunately that stopped today. I bought a new Airport Express 802.11n to use for AirTunes around my new pool. I set it up from my iMac and accidentally used it to connect my iMac to the network for a short time. Now I can no longer connect the iMac to the network using a hard wired Ethernet cable. I have tried resetting everything possible, from hubs to routers to the Mac itself and it just will not connect to the network through Ethernet any longer. I am now a very frustrated Apple user especially when the support site says I can't use the fast path support because my product was manufactured 5 years ago...I just bought it at BestBuy yesterday. All other computers and itechnology in the house are connecting via wifi and Ethernet without any issue except from my new iMac boat anchor. Anybody who can help me??? Thanks

John, thanks for the email so quickly.
I too hope I haven't tried "everything" either but I am reasonably technical. I had done what you suggested to do before but I did both again.
Ethernet is yellow in the left side bar. In the right pane it's status says Connected but then below it says "Ethernet has a self-assigned IP address and will not be able to connect to the Internet."
I have tried the assist me menu and Network Status has Ethernet Green, Network settings Yellow, ISP Green, and Internet and Server Red and Failed for both. I have turned things off and on, checked cables, deleted all locations and tried restting them up but to no avail. I even disconnected everything and connected the mac directly into the cable modem itself and the thing still will not connect.
Thoughts???

Unable to Connect Using New AirPort Express 802.11n

My mom purchased an AirPort Express 802.11n wireless router (AX) and I, as the designated "technology guru", was tasked with setting it up. Unfortunately, I am having problems out of the box.
When I connect it to the wall, it is found by AirPort Utility, but when I try to set it up, it is unable to connect to the wireless network. ("An error occurred joining the selected wireless network." "An error occurred, close the configuration window and try again.") This is annoying because I have an older AX and it was true to the "it just works" Apple mantra. It is also annoying because the error message has a comma splice.
Feeling pretty proud of my "technology guru" title, I come here to see what I could be doing wrong. I try connecting the computer directly to the router via ethernet cable. With this, I am able to setup my wireless network. I am still not able to connect to it. Additionally, once the AX has been configured, the AirPort Utility can't find it.
I tried updating firmware to 7.5.2. I've tried downgrading to 7.3.2. I've tried hard resets, soft resets. Every tip I could find I have tried. Please help. My self-confidence is wearing out.
Is it time for a call to Apple or a visit to the Apple Store?

Are you trying to configure the Express to "join" the wireless network?
If yes, the message you are receiving is likely an indication that you do not have the correct security settings selected for the Express. Unless the security settings between the wireless router and Express match up exactly, the Express will display the error that "an error occurred, etc".
The easiest way to confirm if you have this problem is temporarily set the main wireless router to "no security" and try to connect the Express that way. If you can connect, then you know that it is a security issue.
Please tell us the exact setting for security that the wireless router there is using and we'll try to give you some more ideas.
The Express will connect. It's just a matter of finding the right settings.
Message was edited by: Bob Timmons

I'm trying to extend the range of an Airport Extreme 802.11g by adding an Airport Express 802.11n. I set the Express up to join the existing network, but it does not make any difference in the range of the network. What's wrong?

I'm trying to extend the range of an Airport Extreme 802.11g by adding an Airport Express 802.11n. I set the Express up to join the existing network, but it does not make any difference in the range of the network. What's wrong?

Let me see if I can help you with the basic WDS configuration steps:
Note: To help facilitate the setup, temporarily connect the AXn directly to the AEBS LAN port using an Ethernet cable. Once the setup is complete, you can move the AXn to the desired location. For all configuration steps you will be using the AirPort Utility. Before starting, be sure to jot down the AppleIDs for both base stations.
802.11g AirPort Extreme Base Station (AEBS) Configuration
AirPort Utility > Select the AEBS > Manual Setup > Wireless tab
Wireless Mode: Participate in a WDS network
Manual Setup > WDS tab
WDS Mode: WDS main
Allow wireless clients (checked)
WDS Remotes: <enter the AppleID for the AXn here>
Click on Update and allow the base station to restart.
802.11n AirPort Express Base Station (AXn) Configuration
AirPort Utility > Select the AXn > Manual Setup > Wireless tab
Wireless Mode: Participate in a WDS network (Note: You may have to hold down the Option (Mac) or Control (PC) key to see this option in the list.)
Manual Setup > WDS tab
WDS Mode: WDS remote
Allow wireless clients (checked)
WDS Main: <enter the AppleID for the AEBS here>
Click on Update and allow the base station to restart.

HT1998 what is the latest update for Airport Express 802.11n with the Mac OSX10.6.8

what is the latest update for Airport Express 802.11n with Mac OSX 10.6.8?

You can find out as follows:
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click the AirPort Express
Click Manual Setup
Click directly on the word Version (3rd line)
If there are any updates, you will be notified.
If there are not any updates, you have already have the latest firmware.

HT4259 When a Netgear N 300 wireless router is the base station for my network, what steps do I take to add AirPort Express 802.11n as an network extender?

When a Netgear N 300 wireless router is the base station for my network, what steps do I take to add AirPort Express 802.11n as an network extender?

You don't have to do anything to the netgear.. the Express cannot wirelessly extend non-apple networks. You must plug the Express in by ethernet and create a new wireless network.. this can be the same name (SSID) and security as the netgear so it can become a roaming network.

I recently switched from LinkSys to Airport Express 802.11n. I love it, but I can't get the Wii to talk to it so I can stream NetFlix. I've found MANY discussions on this, but it's still not clear to me. Anybody have a step by step so I can fix it?

I recently switched from LinkSys to Airport Express 802.11n. I love it...but now I my Wii can't see it so I can stream NetFlix. I have found MANY discussions on line about this...but it's still not clear to me. Anybody have a step by step way to fix this? Thanks! Jim Matherly

Well, the Airport Express is also compatible with 802.11a, 802.11b, and 802.11g. If your Wii is unable to connect to the wireless network, I recommended changing the wireless security of your network.
Open Airport Utility, select your Airport Express and click Edit. Navigate to the Wireless tab and change your security from WPA2 Personal to WPA/WPA2 Personal. Then click Update on the bottom right.

I have an airport express (802.11n) which download do I need to get it work on Windows 8.1?

I have an airport express (802.11n) which download do I need to get it work on Windows 8.1?

That one doesn't work.
Verstuurd vanaf mijn iPhone
Op 19 nov. 2014 om 13:55 heeft "Apple Support Communities Updates" <[email protected]<mailto:[email protected]>> het volgende geschreven:
http://www.apple.com/support/assets/images/external/emails/logo.gif
You received a reply
Bob Timmons<https://discussions.apple.com/people/Bob+Timmons?ac_cid=op123456> has replied to your question. You can view the full discussion<https://discussions.apple.com/message/27128939?ac_cid=op123456#27128939> in Apple Support Communities.
I have an airport express (802.11n) which download do I need to get it work on Windows 8.1?<https://discussions.apple.com/message/27128939?ac_cid=op123456#27128939>
It has been some time since Apple updated AirPort Utility for Windows. The current version is 5.6.1.
It runs on Windows 7, but I have not checked on Windows 8.
AirPort Utility 5.6.1 for Windows<http://support.apple.com/kb/dl1547>
Correct Answer <https://discussions.apple.com/email/thread/6679920/correct/27128939> Helpful Answer <https://discussions.apple.com/email/thread/6679920/helpful/27128939>
Use the buttons above to tell Bob Timmons and the rest of the community if this reply solved your question or helped you get closer to finding a solution.
To reply to Bob Timmons, go to the discussion<https://discussions.apple.com/message/27128939?ac_cid=op123456#27128939> in Apple Support Communities.
You are receiving this email from Apple Support Communities. You can change your email preferences in your Apple Support Communities Profile<https://discussions.apple.com/user-preferences!input.jspa>.
TM and copyright © 2014 Apple Inc. 1 Infinite Loop, MS 96-DM. Cupertino, CA 95014.
All Rights Reserved<http://www.apple.com/legal/> | Privacy Policy<http://www.apple.com/legal/privacy/> | Terms of Use<https://discussions.apple.com/docs/DOC-5952> | Apple Support<http://www.apple.com/support/>

Speed issue with TC and Airport Express 802.11n in WDS mode...

Here is my problem.
I replaced my older base station / Express duo with
a new Time Capsule (1TB) and a new Airport Express (802.11n).
I set up the network with the TC as base station running a WDS network (WDS main) and the Express is the WDS remote.
When I check the wireless clients from the TC, I find my iMac running at 130Mbits and the Extreme at 54Mbits.
No other wireless clients are connected to the network (I kept my slower network as a parallel one for my "older" Macs).
The only other connected device is my Dish network DVR that is connected via an Ethernet cable directly to the Express.
So my question is why does the Express not communicate at >54 speed rate with the TC?
And, why does my iMac connect with 130 and not with 300Mbits?
Any thoughts?

Instead of using WDS, you should take advantage of the "Allow this network to be extended" option that is available for the 802.11n AirPorts including the TC. WDS only operates in the 802.11g radio mode.
Here's the basic setup:
o If practical, place the base stations in near proximity to each other during the setup phase. Once done, move them to their desired locations.
o Open AirPort Utility and select the base station that will connect to the Internet.
o Choose Manual Setup from the Base Station menu, or double-click the base station to open the configuration in a separate window. Enter the base station password if necessary.
o Click AirPort in the toolbar, and then click Wireless.
o Choose “Create a wireless network” from the Wireless Mode pop-up menu, and then select the “Allow this network to be extended” checkbox.
o Next, select the base station that will extend this network, and choose Manual Setup from the Base Station menu, or double-click the base station to open its configuration in a separate window. Enter the base station password if necessary.
o Choose “Extend a wireless network” from the Wireless Mode pop-up menu, and then choose the network you want to extend from the Network Name pop-up menu.
o Enter the base station network and base station password is necessary.
o Click Update to update the base station with new network settings.
(ref: Page 46 of "Designing AirPort Networks Using AirPort Utility).

Speed issue with WDS, Airport Extreme, and Airport Express 802.11n

I have a Airport network set up using WDS and two airport base stations: an Airport Extreme 802.11n, and an Airport Express 802.11n. The Extreme is configured to be WDS main and is connected to my cable modem and other computers, while the express is WDS relay and acts as a switch.
I don't actually have any wireless clients connecting to the express. I'm using it to connect a mac with no airport card to the network by plugging it into the ethernet port on the express. For the most part, it works, and the mac gets a network address and can access the network. However, the connection speed from the Express to the Extreme seems slower than it should be.
Since both are 802.11n, and the Mac is plugged into the Express's 10/100 ethernet port, I figure the theoretical top speed that the Mac should be able to communicate with another device plugged into the Extreme is at around the same speeds as 100 mbps ethernet, since the 100 mbps ethernet connection should be the bottleneck in this case. In reality, the speeds are much slower: when I transfer files between a machine connected to the extreme (via ethernet) and my mac, the speed tops out at about 2 megabytes a second, if that.
I looked in the Airport Extreme's logs, and it indicates that the Express is only connected at 54 mbps, as though it were a 802.11g Express. I have no idea why this is! Also, the only wireless communication is between the Extreme and the Express, so one wireless device acting as a relay for another (and thus cutting the throughput in half) shouldn't be an issue.
Does anyone know why the speeds are so slow, and if there's anything I can do to improve them?

Hello Brian Kendall. Welcome to the Apple Discussions!
I looked in the Airport Extreme's logs, and it indicates that the Express is only connected at 54 mbps, as though it were a 802.11g Express. I have no idea why this is!
That is because you established a WDS which only runs in 802.11g. Since you have two 802.11n base station, you would want to take advantage of the "Extend a network" feature available with these base stations.
Here's a typical setup:
o If practical, place the base stations in near proximity to each other during the setup phase. Once done, move them to their desired locations.
o Open AirPort Utility and select the base station that will connect to the Internet.
o Choose Manual Setup from the Base Station menu, or double-click the base station to open the configuration in a separate window. Enter the base station password if necessary.
o Click AirPort in the toolbar, and then click Wireless.
o Choose “Create a wireless network” from the Wireless Mode pop-up menu, and then select the “Allow this network to be extended” checkbox.
o Next, select the base station that will extend this network, and choose Manual Setup from the Base Station menu, or double-click the base station to open its configuration in a separate window. Enter the base station password if necessary.
o Choose “Extend a wireless network” from the Wireless Mode pop-up menu, and then choose the network you want to extend from the Network Name pop-up menu.
o Enter the base station network and base station password is necessary.
o Click Update to update the base station with new network settings.
(ref: Page 46 of "Designing AirPort Networks Using AirPort Utility.)

Airport Express (802.11n) as non-NAT router?

I am considering to replace an old WLAN router by an Airport Extreme. For this, the Airport Extreme unit would need to work as a non-NAT router (my network consists of multiple independent subnets). I've looked through the (very helpful) discussions, but could not find a definitive answer to this question. So, can you tell me point-blank whether an Airport Express (802.11n) base station can be used as a *non-NAT router* (connected to subnet A via the WAN port, creating a different subnet B on the LAN ports)?

broadwater, Welcome to the discussion area!
No this can't be done. The AirPort Extreme base station (AEBS) can be configured to create a single subnet for all clients (LAN port or wireless) but in that mode DHCP and NAT are enabled.

Is the airport express 802.11n used as a booster to enhance your wifi capabilities?

Similar Messages

Maybe you are looking for