Is the airport extreme free to use

I'm thinking of buying the airport extreme adm just wondering if is it free to use once you have bought it

Hello:
Yes, there is no monthly charge.  You do, of course, pay whatever fee is required to connect to the Internet (your own ISP charge).
Barry

Similar Messages

  • Can't use my HP Deskjet F4580 Wireless Printer with the AirPort Extreme Base. The printer is NOT connected at the USB port of the AirPort Extreme, and is placed in another room. It worked just fine with my previous router (Linksys WRT54G). Help me!

    Hey Guys!
    I just got my AirPort Extreme Base, but I can't use my HP Deskjet F4580 wireless printer with it.
    The printer is not connected to the AirPort Extreme's USB port. It is placed in another room, and I'd like to use it (the printer) wirelessly (not connected to the USB port os the AirPort Extreme), as I used to. There is no place for the printer close the AirPort Extreme. It worked just fine with my previous wireless router (Linksys WRT54G). I'm very disappointed with the AirPort Extreme Base Station because of that!...
    Can you help me? Please?!
    Thanks Folks!

    This must be a tough one, no suggestions at all.

  • I have an Airport Extreme which I'm using for a wireless network. Can I also plug in my iMac to one of the free ethernet ports on the Airport Extreme to connect to the Internet that way? Thank you.

    I have an Airport Extreme which I'm using for a wireless network. (The wireless router is connected to a DSL modem.) Can I also plug in my iMac to one of the free ethernet ports on the Airport Extreme to connect to the Internet that way? Thank you.

    Yes, you can.

  • How do i use the airport extreme to extend my wireless network

    How do i connected my airport extreme up to my existing network so that it can extend my wireless through out the house ??
    Can it be done wirelessly or do i need an ethernet cable thats about 10m ?
    Keith

    The AirPort Exteme can "extend" your existing wireless network (using wireless only) if it is being provided by another Apple router.
    If your current main router is not an Apple product, then you will need to plan to connect the AirPort Extreme to your router using an Ethernet cable.
    Post back for more information if needed.

  • Can I connect a 4 TB USB drive to the airport extreme and use it as a network drive for Time Machine

    Can I connect a 4 TB USB drive to the airport extreme and use it as a network drive for Time Machine

    Yes, if the drive is formatted in Mac OS Extended (Journaled).
    The USB port on the Time Capsule is under powered, so you may need use a powered USB hub with the 4 TB drive...even if it has its own power supply.

  • I have the airport extreme.  I can print from my mac using wireless.  I set up the bonjour with my mac laptop.  It see's the printer but when I try to print from my laptop it tells me the printer is offline.  Printer is on and prints from mac.  Help!

    I can not print from my mac laptop.  I have the airport extreme for wireless.  I can print from my Mac using wireless but not my laptop.  Laptop see the printer but says its offline when I attempt to print.  Help!

    Try this:
    http://discussions.apple.com/message.jspa?messageID=8096765#8096765
    Good luck!

  • HT201250 Time machine back up using a external hard drive connected to the Airport extreme

    How can I setup a time machine back up using a external hard drive connected to the Airport extreme? Even better for time managment purposes I want to use the Eithernet Thunderbolt connection for the first back up and then through the wifi there after for daily routine Time Machine back ups.

    You can attach a hard drive, but Time Machine backups to a drive at the USB port at the AirPort Extreme are not supported by Apple, so it's not possible to say what your actual results might be.
    If you decide to try this, it would be wise to have a secondary backup plan in place as well.
    http://docs.info.apple.com/article.html?path=Mac/10.6/en/15139.html

  • HT1145 The airport extreme used with my iMac is not seeing my other devices...anybody, please?

    The airport extreme used with my iMac is not seeing my iPhone 5, iPad (third generation) or my windows based PC.  When I open the airport utility it shows only the internet and my iMac.  It does not identify the others.  Any thoughts?  Thanks

    Hi DaileyT,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at this article:
    When do Apple wireless devices appear in AirPort Utility?
    http://support.apple.com/kb/HT3624
    Troubleshooting missing devices
    If your Apple wireless device doesn't show up in the wireless device list, try the following:
    Check to see that the device is turned on.
    Check that the device is connected to the network via Ethernet or in wireless range of your computer.
    Make sure the device has had adequate time to start up and become discoverable. In the case of Apple wireless devices that are not connected via Ethernet, AirPort Utility scans for new devices once every 15 seconds. From the time a device becomes discoverable (typically around one minute), it could take up to another 15 seconds before the device is displayed in the list.
    If you have just configured a new Apple Wireless device, upgraded the firmware, selected "Restore Default Settings..." or have hard reset and configured an Apple wireless device and it does not show up in AirPort Utility after restarting, you may have an incorrect setting. You may want to hard reset the unit and set it up again.
    If you are connected to a specific wireless network, all Apple wireless devices which make up that network will appear. However, if you "Restore Default Settings..." from AirPort Utility, or hard reset a device that is out of physical wireless range of the computer, you will need to move the device closer the computer to configure it again.
    Best of luck,
    Mario

  • Issue Loading Specific Web Pages Using the Airport Extreme Base Station

    I see that several other members have had this same issue - has anyone resolved their problem? Here is my issue:
    It all started when my wife tried to load her favorite Web page at http://hpana.com - the site now takes well over 5 minutes to load. This started some time after updating the recent security update 2007-009 Version 1.0 and shortly thereafter version 1.1. I have tried using the other Mac computers in the house, using the same wireless network and the same problem presents itself. I have tried loading the page using friend’s computers (Mac and PC, from out side my home) and the page loads within seconds. I have tried using Safari, IE and Firefox (at home), the problem remains. I contacted the hpana.com Webmaster and they have made no changes to their web site.
    I disconnected our cable modem, and connected the modem directly to the iMac (by passing the Apple Airport) and the page loads within seconds. I’m guessing it has something to do with the Airport Extreme.
    So, I contacted Apple Support. The issue was quickly elevated and eventually forwarded to the Airport Extreme Hardware guys – I expect to get an answer by Mid January 2008.
    I took a trip to the local Apple store and after explaining the situation, the store manger replaced the AirPort Extreme with the hope this would resolve the issue. After getting the “new” Airport Extreme up and running … the problem remained. This particular web site hpana.com still takes well over 5 minutes to load. I have no such issue with some of the other 60 or so sites I tried.
    I by passed the “new” Airport once again by connecting the cable modem directly to the iMac and, as before the web page loads within seconds.
    I’ll wait until I get a response from Apple come January, but I was wondering if anyone on the Forum would be willing to share their respective opinions.
    Thank You and Happy Holidays.

    Hi,
    There are some differences between the configuration of Airport equipment sold in different countries, however this is likely to not be the cause of your system's issues. ( See this document for details on that - http://docs.info.apple.com/article.html?artnum=58567 )
    Hong Kong has a very high density of population, especially compared to Australia.. I suspect your wifi signal is probably getting interference from your neighbours wifi, phones and microwaves. There's not much you can do about this, except getting an external antenna for the AEBS and trying to drown them out with it.

  • Can I use the AirPort Extreme as a wireless extender to my Time Capsule ?

    Can I use AirPort Extreme as a wireless extender ? I own a Time Capsule and want to extend my wireless network using the AirPort Extreme just because both have wifi AC. Also, does the AirPort Extreme need to be hook up via Ethernet if I extend

    The problem with extending using a wireless connection between the Time Capsule and AirPort Extreme is this.......
    The extender can only "extend" the speed of signal that it receives. The signal starts to lose speed as soon as it leaves the Time Capsule, and the signal will lose quite a bit of speed as it passes through the ceiling due to the thick construction. The ceiling presents what is known as "interference" to the wireless signal.
    So, the signal has slowed somewhat by the time that it reaches an AirPort Extreme that would be installed on the main floor.  That AirPort Extreme acting as an extender can make the signal that it receives go further, but it cannot make it go faster.  A better term than "extender" really might be "repeater".
    If you install an AirPort Extreme on the main floor, the signal upstairs will be stronger than it is now, and depending on how many obstructions there are between the AirPort Extreme and the upstairs area, the signal may be noticeably faster upstairs than it is now as well.
    With wireless connections between devices, there are always so many compromises and variables involved that it is just not possible to predict what the actual performance might be in your home until you try things out in your home. For that reason, it is always a good idea to understand the store's return policy in advance in case a new item does not deliver the performance that you are hoping to achieve.
    Now, let's say that you are able to pull an Ethernet cable from the Time Capsule to the main floor, and the AirPort Extreme is connected there in a nice, central location. Then, you could expect to receive about the same performance on the main floor that you receive in the basement, since the AirPort Extreme is receiving a full speed signal over the Ethernet cable from the Time Capsule. You can run an Ethernet cable about 330 feet, or about 100 meters with virtually no signal loss.
    The performance upstairs will improve as well, since the AirPort Extreme has a full speed signal to broadcast....not the slower speed signal that would receive from the Time Capsule if it connects using wireless.
    If you want to achieve the same type of performance upstairs that you have in the basement and main floor, then you will need to pull an additional Ethernet cable up to the upstairs floor and add another AirPort there.
    That would probably be the "best" wireless network system that you could install if you are looking at all the options. Few of us are lucky enough to be able to install the "best" network, but those that are receive remarkable wireless performance in return for their investment.

  • Using the WAN port as a "LAN" port on the Airport Extreme Base Station...

    Hi everyone,
    I'm re-building my home wireless network and I'm doing so in preparation for the Slingbox AV I ordered last week. Here's my current setup:
    I have a DSL modem attached to an Airport Express (802.11n) in my office broadcasting my internet signal. I have an Airport Extreme Base Station (802.11g) set up in my living room as a WDS extender. I currently use the base station in my living room to connect the DishNetwork ViP722 DVR to the internet and allow me to set recordings remotely on my iPhone when I'm away from home. I use the LAN port on the base station to do this, and now with the Slingbox on the way (should be here early next week), I'm wondering what I need to do to make an internet connection available for the Slingbox AV.
    My question: Will I be able to simply use the WAN port as a "LAN" port since the Airport Extreme Base Station is being used as a WDS? It'd be awesome if the WAN port would become, essentially, a LAN port since it isn't being used.
    Thanks in advance for your advice and insight!

    slugoo wrote:
    My question: Will I be able to simply use the WAN port as a "LAN" port since the Airport Extreme Base Station is being used as a WDS? It'd be awesome if the WAN port would become, essentially, a LAN port since it isn't being used.
    I'd be surprised if that worked. The operation of an AirPort base station depends on keeping the WAN port and the LAN port(s) separate, as those normally are on two different networks.
    You might consider buying an Ethernet hub or switch, which would allow your AirPort Extreme's LAN port to be shared. Here's an example of an inexpensive one:
    http://www.bestbuy.com/site/olspage.jsp?skuId=7169244&st=ethernet+switch&type=pr oduct&id=1110266457435

  • Is it possible to use the AirPort Extreme wirelessly (without Ethernet cable)

    Instead of plugging it directly into my Modem, can I set it up wirelessly?

    The AirPort Extreme always needs to connect to a modem using a wired Ethernet connection....as the Setup Guide illustrates.

  • Can an encrypted USB drive be used with the Airport Extreme?

    I would like to keep an encrypted USB drive hooked up to my Airport Extreme (A1354) so that I can use it for a hand archive of documents I might need to reference on the road or conveniently within my home, mainly because it would be handier than having to plug and unplug a USB device into whatever computer I'm using, and would allow my wife to do the same with her computer. I know most internet providers provide a service like this, but I figured why not just do this with my Airport Extreme?
    I've read posts from people who have taken encrypted USB volumes generated from their MacBook Pro, and plug that USB device into the Airport Extreme. The Airport recognized the device exists, but it is you can't actually use it as an encrypted volume. This seems like a flaw on the part of Apple if you can't do this, as this device is a much more expensive solution that what most wireless routers provide.
    Has anybody figured this one out?

    Doubtful it's going to work. 
    Does it see the same disk if it's formatted just Journaled (ie, not encrypted)?
    The tehnical article isn't entirely clear . . . it just says Mac OS Extended:  AirPort Extreme (802.11n) and Time Capsule: USB storage device supported formats and protocols
    It was last modified June 14, 2011, a couple of weeks before Lion was released with the ability to encrypt drives.
    Note that ExFAT is supported on Macs effective with 10.6.5, but not Airport Extremes; there's no reason to think encryption is any different.

  • Can i use time machine with a hard drive connected to the airport extreme?

    Just wondering if there is any news on this since the last post was in 2008.
    The Apple website info regarding the Airport Extreme mentions attaching a hard drive to the Airport Extreme, but I can't see whether that could be used for a Mac using Time Machine.

    You can attach a hard drive, but Time Machine backups to a drive at the USB port at the AirPort Extreme are not supported by Apple, so it's not possible to say what your actual results might be.
    If you decide to try this, it would be wise to have a secondary backup plan in place as well.
    http://docs.info.apple.com/article.html?path=Mac/10.6/en/15139.html

  • Can I use the AirPort Extreme to print with my iPhone on a non AirPrint compatible printer

    Can I used this as my new network router and make my printer work with my iPad and iPhone

    In order to print from an iPhone or iPad, your printer needs to be AirPrint compatible.  Check to see if your printer is compatible using this Apple support document:
    http://support.apple.com/kb/HT4356
    Simply connecting the printer to the AirPort Extreme will not make it AirPrint compatible.

Maybe you are looking for

  • Component visibility in the screen,

    Hi I'm facing a problem in the visibility of the component. My need is to identify the component is in visibility or not. ex: In a panel, i'm trying to change the location of the label , at a stage the label gets moved to end and the label is not in

  • Workflow Circuit between FCP and After Effects with HDV

    I am trying to set up a workflow circuit with FCP 5.1.1 and AE 7.0 using HDV. We are: 1. building sequences with FCP 2. exporting to AE 3. adding in FX with AE 4. putting those back into FCP The footage we are using is compressed with HDV 1080i60 in

  • Solaris 10 11/06 Rev. A hangs during installation

    Just received my Solaris 10 DVD package in the mail; during the boot process to go into the installation process, it hangs no matter what you select in GRUB this is the screen (when selecting to boot 'Solaris') in which it hangs... SunOS Release 5.10

  • No Button in a specific JSP page fires event..

    hi I desperately need help in following thing. I wanted to sort a datatable by command links in headers but those were not firing events so i used teh buttons instead. They kept on working fine but now something weird has happened. Neither the button

  • How to make use of JApplet's JLayeredPanel?

    My applet has several screens... a loading screen, a login screen, a chat screen, etc. It switches between screens at various times during operation. Here are some snipits from the current code: // Initialization public void init() {      super.init(