Is the Alesis MultiMix FW16 compatible with Logic Pro 7???????

I'm looking for a new interface. I was looking at either a MOTU 828 MkII, (but I need more mic pre's for recording drums on individual tracks), or maybe an Alesis MultiMix FW16. I would also like to be able to insert Compression to the mix prior to the A/D conversion. I guess I could run XLR to 1/4" to the Motu would although I don't know if that would work. I just need help, PLEASE!!

yea should be it uses core audio.

Similar Messages

Mackie onyx 1640i digital mixer compatible with logic pro x??

I have a macbook pro 10.9.1. And was curious about purchasing a mackie onyx 1640i digital mixer. Is it compatible with logic pro x DAW?? Feed back would be much, much appreciated!

Well I got the 13 mackbook pro retina, mackie onyx1640i three days ago and havent got the onyx and the mac to talk to each other. Problem is, mackie had a firewire 400 output and the Mac has a thunderbolt input. So i guess you got to use adapters? I have an old macbook pro and it does have a 400 firewire input. I dont know what they were thinking, they need a 400 firewire and one end and a thunderbolt cable at he other. Marco805

Korg nano séries it compatible with Logic Pro x ?

Korg nano séries it compatible with Logic Pro x ?

It's usually not about if the hardware is compatible with LPX.. It's if it is compatible with Mountain Lion that matters... as LPX needs 10.8.4 to run...
So, if the Nano series is compatible with Mountain Lion, you should be good to go..
To find out, see Korg's website
http://www.korg.com/SupportPage.aspx?productid=415
...and download the compatibility chart found there...

Is Steinberg MR816csx compatible with Logic Pro 8?

Hi
I got a MR816csx two days back, and was wondering if it is compatible with Logic pro 8.
Thanks

Hi,
it should be, if this article is right:
http://www.soundonsound.com/sos/nov08/articles/steinbergmr816csx.htm
Regards,
Jaap

Is MBOX compatible with logic pro?

I was offered to buy an MBOX at a very reasonable price, and I have been looking into getting a preamp. Is the Mbox compatible with Logic express or just with pro tools? How would I benefit from this hardware?

Hi,
I can't speak for the mbox1. But I own an mbox2 pro, which is a GREAT box.
It's also highly acclaimed by folks who have put it to more scrutiny than me.
Being made by Digidesign is, IMO, a quality mark in itself. Say what you want about ProTools etc. (I prefer Logic by far), but hi-def audio is what they know.
I just had to download and install Digidesign's CoreAudio drivers to make it work properly - no prob.
It's not poor just because it's been on the market a few years. But whether you should get the (oldish) mbox1 or get something newer, is up to you
Just my $0.02
Eivind

Will the Tascam FW-1884 work with Logic Pro X?

Hello,
I notice that the new Logic is 64 bit only and yet the Tascam FW-1884 is specifically listed as a supported control surface.
Tascam has not released 64 bit drivers for this device! Can anyone shed any light on this? Will it work only as a control surface and not an audio interface? Is the documentation in error? Anyone have this working with Logic Pro X?
Thanks,
Lyford Rome

Lyford,
Again, in regards to hardware... it is not about LPX compatibility.. It is about compatibility with the OS X version and it's CoreAudio... Once you 'get' that point then everything else makes sense...
Tascam are notorious about leaving owners of "End of Line" products 'high and dry' when OS X is updated... and as you have found... the 1884 is not compatible with Mountain Lion 10.8.4 and likely will never be so... because Tascam will not be releasing Mountain Lion drivers for it.. so, it is not something you can use with LPX, which requires Mountain Lion 10.8.4 as a minimum requirement.
As an aside, Apple have acknowledged they make an error in simply using the LP9 Hardware compatibility chart for LPX (as LP9 could be used with earlier OS X versions for which there were drivers for the 1884 for example) and have said they will be issuing an updated version "in the near future"......

Do you know if the Digidesign 192 will work with Logic Pro X?

Hi everybody! The question is simple, maube the answer too... Do anyone know if the Digidesign 192 I/O will (completely) work with Logic Pro X or if it needs other devices (such as controllers, internal or external card, etc.)? Thank you all.

Hi Jacub,
I have a 2i4 running Mavericks 10.9.2 on a Mac Book Pro, and my unit works properly, please make sure your run the unit with the class compliant mode app (click the link below):
http://us.focusrite.com/downloads?product=iTrack+Solo
Please contact Focusrite support if you have any more concerns.
Best Regards,

Is GarageBand iOS 2.0.1 compatible with Logic Pro 9.1.8?

I run Logic Pro 9.1.8 on a Mac Pro 1,1 (Snow Leopard 10.6.8) and GarageBand 2.0.1/ iOS (7) on the iPad2. The songs are built on the iPad, then opened in Logic on the Mac. This worked like a charm until recently when the iPad was updated w/ the new GB. Used to just click on the ".band" file, exported from the iPad to the Mac via iTunes, and it would open in Logic (the only audio software on the Mac), but now it asks me to save the file instead of opening it. Then when trying to open the newly saved GB version in Logic you either get a blank arrange screen or Logic crashes and says it needs to be updated.
9.1.8 the latest version of Logic Pro 9, so is it asking me to get Logic 10? If so, it would seem that I need a new Mac as mine is 32-bit and Logic 10 is 64-bit.
Does Apple keep the GB and LP versions concurrent? Meaning that the current GarageBand is compatible w/ the current Logic Pro? The least expensive solution might be to go back to the 8 track GB for iOS, but how can I do that? I do not have that purchase on my app store account any more as it was purchased from a different account that I no longer have access to.
I don't ever remember having to first save the file in LP9 and then check a bunch of boxes in the Advanced section when saving it, but this does work to open the old files (8 track version of GB iOS) . So, I tried again w/ the new GB files (16 track version of GB) and Logic crashed again and said the file was "created on a different version of Logic" please update Logic. With no more updates for Logic Pro 9, it wants LP 10? Which I can't do bc of the specs of my computer.
Your thoughts and ideas are welcomed and appreciated. Thank you.
Mac Pro 1.1 (June 2007)
2x Quad Core 2.66 Ghz Intel Xeon
16 GB RAM
(2) HD's
Audio Drive: WD Caviar Black
Logic 9.1.8
Snow Leopard 10.6.8
iPad2 w/ GarageBand 2.0.1/ iOS 7

Hi Lee,
Thank you. That is a great work around! Yes, where is 1.x that I paid for? Exactly! That would have helped immensely.
I tried to get Garageband iOS 1.x, but could not. Contacted Apple and they said I could book a service call w/ their technical department for about $30USD! For a $5 app that I already paid for?! Are they serious?! I don't even think (even after the $30) they could have done anything. I know, it was just a poor customer service rep and they are just following protocol. I even thought of trading my iPad to someone who hadn't updated their iOS. Then I should have seen the old GB (compatible w/ the old iOS 1.x) in the app store.
My work around:
- Bought a used 2008 64-bit Mac Pro tower on eBay ($700USD w/ shipping).
- Installed Mavericks and GB (free)
- Paid for Logic X ($200)
My 2007 Mac Pro is for sale on eBay! I won't get all of the $ back, but will get some.
Imported my first GB iOS 2.0.1 into Logic X - it wouldn't open! Yet another download was needed for compatibility. So, I just opened the iOS song in GB on the Mac Tower w/ Mavericks. Saved the file in GB then opened it in Logic X. I did download the 1 billion gigs for compatibility for LPX, but have yet to try it. So long as GB does the job, it only takes a few extra secs.
I now have access to LPX Session drummer, which is pretty cool. Sometimes your original beats can work better for the song, but session drummer can help w/ fills, mixing and "real drummer" feel sometimes. Now I combine my ideas w/ theirs. One can even take the orig iPad created drum track and use it as a loop along w/ Session Drummer (which can be a bit more of a live drummer feel).
I too write on the iPad when on the road then dump to the Mac Pro Tower when I get home. I had tried a MIDI device to dump the data from the iPad to the Mac. Didn't work. Spent hours researching which software to use for MIDI. Time is $ so I shelled out the dough. They got me! Sort of I didn't buy a new Mac. I'm selling a whole bunch of old studio gear, that I don't use anyway, to make up the difference in cost.
Thanks for your input. This is my 2 cents. I could write a book about this experience!

M-Audio Fast Track USB interface not compatible with Logic Pro X and Yosemite

Hello All!
I've been trying to simply record some guitar and vocal tracks onto the latest version of Logic Pro X. It worked before I downloaded the update of Yosemite, however now, I can't find a solution to my problem. I've tried everything! Installed new drivers onto the M-Audio and even tried to search for a later update of Yosemite. I have read a few things online about how Yosemite doesn't accept 3rd party drivers. So any USB plugged in to the macbook/mac that isn't mac based it doesn't accept.
Please can someone help me solve his issue!
Thankyou!
Felix

I know many, many of us who are running things just fine.
I have to be really honest with you Ben and say... Where are you getting that idea from because it simply isn't so.....
I have a quite large client list of Logic users from all over the world... and of those that have attempted to use Logic Pro X and Yosemite together... over 80% have had to revert back to a previous configuration because of performance and/or stability related issues...
I personally, have on test here at the studios... 7 different Macs ranging from 2010 Mac Mini i7 Servers to 2011 32GB 3.4Ghz iMacs.. to a maxed out 2013 i7 MBP to a top of the line 2014 Mac Pro and all have demonstrated issues regarding performance and stability with LPX and 10.10.x using a variety of different Audio/Midi interfaces, all of which have supposedly 10.10 compatible drivers... and all of which have no such issues running LPX under Mavericks...
Just a quick scan across the various forums.. indicates that very few people are successfully running LPX under Yosemite without performance problems.... so that's why I am asking where you are seeing 'many many people" because I am just not seeing that myself...
Cheers..
Nigel

I have this issue, it tells me "the format of this file is not compatible with logic pro x, please load first into logic pro x version 7.2 or earlier to convert

I have this issue, nobody knows why this happen, please help, I was working for 2 days in that file

...and were there no backups made by Logic automatically?
Assuming the project isn't so badly damaged that this won't work...
Make a new project and save it as say, Temp project...
In Finder... Right/Control click on the original project itself and choose Show Package Contents... from the popup menu
Now navigate to the Alternatives folder and look inside any of the folders in there such as 00... for a Project Backups folder and inside that you should find the backups Logic makes automatically...
You will then need to copy the two files inside that backup folder over the same two files in the Autosave folder of the Temp project you created..... overwriting anything already there..
You may also need to copy over the Resources folder from the original project to the Temp project overwriting the original too.
Now open the Temp project in Logic and see if it works...
Failing all this.. then I hope you have learned the lesson we all learn at some point.. and that is to always make backups via one means or another... because its only a mater of time when and not if.. you will run into these kinds of issues..
Cheers..
Nigel

Using Alesis MultiMix 16 with Logic Pro 9

I'm wondering if anyone out there has any experience working with the Alesis MultiMix 16 Firewire and Logic Pro 9.0? I could use some help getting them to work together...

Yes it is possible, first connect your outboard to the soundcard.....then load the I/O (inserts) plug in on the track you want to process....you can find it in the utility menu....then set the routing of the signal in the I/O window....if you want to record the processed track create a new track with the right routing and the work is done.hope this replay help you . Regards

Does the midi mixer in the environment internally or externally with Logic?

Does the midi mixer in the environment internally or externally with Logic Pro 9? I notice that when I create midi files in Logic, I have to change the parameters (banks, volume, pragram changes etc.) in the event list window, which take a good amount of time to do. Just wondering if that was normal operation, if it could be done from the midi mixer as opposed to the regular mixer.

I have to change the parameters (banks, volume, pragram changes etc.)
There is a special Logic keycommand "Insert Instrument Midi settings as Events". Assign some keys to it, select the midi region you want to insert to (instrument settings like "Bank", "Prg", "Vol", "Pan" etc) and hit that key command which will insert the track settings into the midi region.
BTW. After the operation you can open the Event List for that mid region and check if this works...
www.audiogrocery.com
Author of: Logic GUI Deluxe (Free),
Vox De Bulgaria - s.a.g.e vocal pack for RMX,
Logic Snapshot Console,
RMX Power CTRL - Logic Environment Midi editor for Stylus etc.

How to set up Firestudio Project with Logic Pro 9

Getting a bit frustrated with this stuff!
I have the system listed below, just purchased a Firestudio Project and can't get audio into Logic Pro. The software that comes with the device records but not with Logic Pro!
I assumed it was an easy thing to get running as most is with my Mac but I am getting frustrated!

I use the local off method but there is another way.
Go to Settings/MIDI and use the "Instrument Without MIDI Thru Function" selector to pick the device and channel your hardware keyboard is transmitting on.
Settings are on a Per Song basis, they're not global like Preferences are.

HT1338 I have a Mac Pro Dual Core, 3 Ghz, that I purchased in the Spring of 2007. What is the latest OS that i can upgrade to? And is that OS compatible with Logic 10?

I have a Mac Pro Dual Core, 3 Ghz, that I purchased in the Spring of 2007. What is the latest OS that i can upgrade to? And is that OS compatible with Logic 10?

Logic Pro 10 requires OSX 10.8.4, which is not officially supported on your Mac Pro (must be Early 2008).
There are, however, unofficial workarounds to install 10.8 on those older models that you can search for on Google.

Content Tab: None of the fact tables are compatible with the query request

Hi All,
**One thing I am not clear yet of all my years with OBIEE is working with the content tab in BMM.**
I have made a rpd the joins in physical layer as shown below:
https://picasaweb.google.com/114804305606242416264/OBIEEError#5663056545119428530
And the BMM layer as:
https://picasaweb.google.com/114804305606242416264/OBIEEError#5663056519553812930
Error I am getting when i run a request from the 3 columns from the selected 3 tables is:
Dim - Comment Code Details
Fact - Complaint
Dim - Service Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 14020] None of the fact tables are compatible with the query request Sr Num:[DAggr(Fact - Complaint.Sr Num by [ Dim - Service Details.Sr Cat Type Cd, Dim - Comment Code Details.Cmtcode name] )]. (HY000).
I get no error for consistency.. I read everywhere and I know i need to set the appropriate aggregation levels in the various dims and facts LTS properties to help OBIEE understanding our model, but how to do that.. how do i decide... how should I approach, what should be the aggregation level, what details.
When i click More button i see different options: Copy, Copy From, Get Levels, Check Level, what do these mean.
Aggregation Content, group by - Logical Level or Column which one should i choose and how should I decide.
Can anyone explain the Content Tab in details and from scratch with some example and why we get these errors.... I know many people who are well versed with many other things related to RPD but this. A little efforts of explaining from you guys will really be appreciated.
Thanks in advance,
Dev

Hi Deepak,
Option 1:
My tables in physical layer are joined as below:
D1--> F1 <--D2--> F2 <--D3
Same way i model it in BMM
D1--> F1 <-- D2--> F2 <--D3
Here D1 is non Conformed Dimension for F2 and D3 is non Conformed dim for F1. Later create Dimensional hierarchies, I tried setting up the content levels
I go Sources>content tab of Fact F1 I set
Dimensions----------- Logical level
D1---------------------- D1 Detail
D2---------------------- D2 Detail
D3---------------------- D3 Total
then, I go Sources>content tab of Fact F2 I set
Dimensions----------- Logical level
D1---------------------- D1 Total
D2---------------------- D2 Detail
D3---------------------- D3 Detail
Then, I also go in all the dimensions and set their content levels to Details, but it still gives me errors not sure where I am going wrong in setting the content levels.
I need to know whether the way I have modeled it in BMM is right,
Option 2:
I can combine the two facts in a single Logical Fact or the above design should also work.
(F1&F2)<--D1, D2 , D3 joined separately using complex logical joins.
what will be the content tab details?
Thanks,
Dev

Is the Alesis MultiMix FW16 compatible with Logic Pro 7???????

Similar Messages

Maybe you are looking for