Is the Apache web server feature limited without OS X Server edition?

I couldn't really find a post that answers my question so here it is...
I want to use the built-in Apache web server (a.k.a "Web Sharing") in OSX 10.4, I was just wondering if I am limited on the amount of simultaneous connections/requests? I know only a limited amount (like 5) can connect to my system over a network, unless I install Mac OSX Server. Is the Apache Server stuck under these same restrictions? I'd rather run it from my Mac than have to make a separate linux box for the site (and I don't want to have to fork out $1,000 for OSX Server, lol). I am running Mac OS 10.4.9. If someone could tell me if they know anything regarding this, I'd appreciate it. Thank you

There are differences between the Apache installation in Mac OS X client and Mac OS X Server, but if you're likely to encounter them you should be running Server anyway.
Most of the changes relate to additional apache modules that are installed (which you could add to client if you're up to it) and performance tuning.
The latter is likely to be something you can tweak to cover your needs.
Apache will spawn a new process for each active connection, with an upper limit set to prevent it running away. The limit is higher in Mac OS X Server, but you can increase the default in Mac OS X client to better suit your needs.
Edit the file /etc/httpd/httpd.conf and look for the line:
<pre class=command>MaxClients 50</pre>
(note, your number may be different). You can change the number to any reasonable figure - but don't set it much higher than you actually expect to need.

Similar Messages

Problem while configuring the Apache Web Server as the Intermediary Server

Hello,
I want to use Apache 2.0 web-server as a proxy for my SAP EP so that I could access http://portal_server:50000/irj through this Apache external web-server.
I checked this sap help link as a reference.
http://help.sap.com/saphelp_nw04/helpdata/en/18/5cea2296190e4cb7faf9468ad793ea/frameset.htm
But still not clear what exact configuration I need to do in the httpd.conf file. I searched the posted forums on this topic but couldnt get exact steps.
It would be grateful if anyone can guide me on this configuration (redirecting url etc).
Thanks in advance.
-Mandar

STEPS OF SECURE APACHE-SSL
1.Install apache version like apache_x_y_z_win32.exe also select the right combination of mod_ssl and Openssl.
(Like for apache1.3.33 you need mod_ssl_2.8.22 and Openssl_0.9.7f or Openssl_0.9.7g.
                   Or
Select a mix of all three like [Apache_1.3.33-Mod_SSL_2.8.22-Openssl_0.9.7f-Win32.zip]
(for this install apache service also).
2.    Select   httpd.conf file from (apache\conf) open it for configuration.
3.   Stop the services of apache from Control panel \ administrative tools \ services.
         Note:-- may be it is possible all files for configuration will not be there in apache2.exe then extract the
          Apache_2.0.54-Mod_SSL_2.8.22-Openssl_0.9.7f-Win32.zip file and copy conf,lib,modules logs
files in corresponding folder of Apache2.exe.
                                             HTTPD.CONF   Configuration
1.     Replace all occurrences of www.my-server.dom with the real domain name!
       (If you have installed apache from .exe file then its doesnt required but for . Zip archive file you have to replace it)
2.     Comment port 80 like # port 80
3.     Write Listen 80 and Listen 443 in httpd.conf file.
4.     Extract Openssl in any folder and copy files ssleay32.dll and libeay32.dll into WINNT\SYSTEM32 paste them here.
5.     Download Openssl.cnf file because you need to configure openssl.exe. a link apear select saveas and save it to bin folder of apache2 directory
6.     Copy all the *.exe, *.so, *.dll inside your apache\bin directory from extracted Openssl directory.
7.     Write
              LoadModule ssl_module modules/ApacheModuleSSL.dll
                  or
              LoadModule ssl_module modules/ApacheModuleSSL.so
                  or
              LoadModule ssl_module modules/mod_ssl.so
             after the LoadModule lines that are already in the httpd.config file
      8.    Write AddModule mod_ssl.c this for apache1 for apache2 it is noy required.
           after the AddModule lines that are already in the httpd.config file.
     9. Add the following to the end of httpd.conf:
                    SSLMutex sem
                    SSLRandomSeed startup builtin
                    SSLSessionCache none
                    SSLLog logs/SSL.log
                    SSLLogLevel info
                    SSLEngine On
                    SSLCertificateFile conf/ssl/my-server.cert
                    SSLCertificateKeyFile conf/ssl/my-server.key
                    ProxyRequests Off
<Proxy *>
Order deny,allow
Allow from all
</Proxy>
ProxyPass / http://ServerName:50000/     // your server name and port number
ProxyPassReverse / http://ServerName:50000/   // your server name and port number
ProxyPreserveHost On
save the Httpd.conf file
                                                 GENERATING CERTIFICATE
a.     Open Command Prompt
b.     Reach till bin directory by writing like   cd apache\bin
c.     Write command     bin> openssl req -config openssl.cnf -new -out my-server.csr and put required detail.
d.      Write openssl rsa -in privkey.pem -out my-server.key.
e.     Write openssl x509 -in my-server.csr -out my-server.cert -req -signkey my-server.key -days 365.
f.     Write openssl x509 -in my-server.cert -out my-server.der.crt -outform DER.
g.     Create an Apache/conf/ssl directory and move my-server.key and my-server.cert into it.
10.     Start Apache services from control panel \ Administrative tools \ services.
11.     Now you have made Apache as SSL enabled open browser and test it by https://localhost

Creating Web Services in SAP without J2EE/XI Server

I'm not sure if this is possible. I'm hoping that maybe one of you can answer this. Here's the scenario:
I have a Function Module that's RFC enabled. I also went ahead and converted it to a Web Service. Now, what I'd like to know is, if I want to consume the service do I have to have XI and/or J2EE server running. Or, is it possible to consume it by some other means. Any help is much appreciated.

Hi Eric,
There are two ways to handle
1. you can directly expose this webservice without the need of XI or J2EE server. The wsdl generated will have all the endpoint information, which in ur case will be tightly coupled to the current SAP system where RFC resides.
2. Import the rfc into XI and create a scenario in XI. Expose this scenario as a webservice.
Second option is the refered one as the consumer needn't know where the RFC resides.
cheers,
naveen

How to hide "View in Browser" and "Edit in Browser" from ECB injected by Office Web Apps Feature

Hi,
i am currently using custom_AddDocLibMenuItems to implement a custom ECB menu for my document library. I need to activate Office Web Apps. My custom_AddDocLibMenuItems has two items
-> custom dialog
-> open in office web apps
After activating the Office Web Apps Feature at the SiteCollection Level, this Feature "injects" in my custom menu the following
additional menu items:
-> View in Browser
-> Edit in Browser
Its curious to see that, cause implementing the js function custom_AddDocLibMenuItems with
return true should be the way to impolement a custom ECB menu without having other features/solutions injecting things in this menu!? Or did i misunderstood something here?
My question is: How can i prevent this ...
a) without deactivating the Office Web Apps Feature
b) without modifying the core.js
I hope someone can help!
Best Regards
Bog
Developers Field Notes | www.bog1.de

May be this can help
http://extreme-sharepoint.com/2011/10/29/hide-menu-ecb/http://pholpar.wordpress.com/2011/07/24/hiding-ecb-custom-actions-based-on-specific-list-properties-using-the-client-object-model/Or tryhttp://stackoverflow.com/questions/13795858/how-to-hide-view-in-browser-in-document-library-in-sharepoint-2010-using-javascr $(document).ready(function(){
$('.ms-MenuUIPopupBody').live('blur', function() {
var elm = $("div.ms-MenuUIULItem a:contains('View in Browser')");
elm.remove();
$("div.ms-MenuUIULItem a:contains('Edit in Browser')").remove();
It is hiding menu only on focus or blur or mouseover
I wants it to be hide on load AS soon as i Click on "V" option on right side of document it should hide View in Browser and Edit in browser
When I click on V option ![I wants As soon as i Click on v option right side of test it should hide view in Browser and edit in browser][1]
If this helped you resolve your issue, please mark it Answered

How to install Apache Web Server with PHP on Sun Solaris Sparc machine

Hi,
We are trying to install the Apache Web Server and the PHP package on a Sun Solaris Sparc machine running on SunOS 5.8. We are having compilation problems with the source code of both these packages.
Does anybody know if there are ready solaris packages for Apache and PHP available from where we can download and install instead of source code compilation?
Or any instructions / things to watch for when installing Apache with PHP (if anybody has tried installing Apache with PHP on Sun Solaris earlier) is most welcome.
Thanks,
Harish

Apache should be bundled along with Solaris check in "/var/apache" in Solaris 8 and Solaris 9
php is available at www.php.net
I found an old document for installing PHP maybe this will help.
Cheers
-Dhruva
+++++++++++++++++++++++++++++++++++++++++++++++++++++++Installing PHP 3.x for Apache 1.x.x on Solaris
Introduction
This document describes how to install PHP for Apache on Solaris.
You should have Apache installed before trying to install PHP.
If you want to use PHP with MySQL then you must install MySQL first.
Before we Begin
1. These instructions assume that you have Apache installed according to instructions.
Getting PHP
1. You must be logged in as root to perform this installation.
su root
2. I save all my downloads in:
/usr/local/dist
If you don't already have one, you may need to create that directory now:
mkdir /usr/local/dist
3. You can get PHP 3.0.14 from here(www.php.net).
cd /usr/local/dist
ftp ftp.php.net
cd pub/distributions
bin
get php-3.0.14.tar.gz
bye
Installing PHP
1. We will install PHP in /usr/local/build, but use a tricky tar command
to do it in on hit from the download directory:
cd /usr/local/dist
tar xvfz php-3.0.12.tar.gz -C ../build
Compiling PHP
1. First let's get where the action is:
cd /usr/local/build/php-3.0.14
2. You now have 3 options:
* Simple PHP install without MySQL - goto step 3
* Simple PHP install with MySQL - goto step 4
* Custom PHP install - goto step 5
3. Simple PHP install without MySQL. Next, jump to step 6.
./configure --with-apache=../apache_1.3.12
4. Simple PHP install with MySQL. MySQL must be installed before you can configure PHP to use it. I recommend that MySQL should always be reachable with /usr/local/mysql. Even if you install it else where you
should create a symbolic link from /usr/local/mysql. Otherwise the compiler can have problems finding the mysqlclient library. The command
should look like this:
./configure with-mysql=/usr/local/mysql with-apache=../apache_1.3.12
Next, jump to step 6.
5. Custom PHP install. Take a look at the available configuration directives by using this command:
./configure --help
6. Now we can make the PHP executable. This may take a while.
make
7. Now we install the PHP module with:
make install
Adding the PHP Module to Apache
1. Now we have to setup Apache to include the PHP module:
cd ../apache_1.3.12
2. Re-configure Apache to use the PHP module. You should use your previous Apache configure command along with the PHP activate module directive.
You can see your previous Apache configure command by doing:
cat config.status
You can configure Apache using the previous command with the added PHP module by doing:
./config.status --activate-module=src/modules/php3/libphp3.a
If you used the simple Apache install from instructions the command will look like this:
./configure prefix=/usr/local/apache activate-module=src/modules/php3/libphp3.a
3. Make and install Apache with PHP enabled:
make
4. We need to stop the server before installing the files:
/usr/local/apache/bin/apachectl stop
5. Now we can install the new binaries:
make install
6. Start apache again (now running the new php enabled version):
/usr/local/apache/bin/apachectl start
Setting Up PHP
1. We have to tell Apache to pass certain file extensions to PHP. We do this in Apache's httpd.conf file.
cd /usr/local/apache/conf
2. Edit the httpd.conf file. If you do a search for php you will find a couple of commented out lines telling Apache to use the PHP module. You should uncomment them to look like this.
AddType application/x-httpd-php3 .php3
AddType application/x-httpd-php3-source .phps
3. I prefer to use the extension .phtml, you can use whatever extension you like (even .html) by adding lines to httpd.conf like this:
AddType application/x-httpd-php3 .phtml
Check that it Works
1. We have to restart Apache to make these changes take effect on the running server.
cd /usr/local/apache/bin
./apachectl restart
2. Apache should now be running with PHP enabled. The server version should include PHP/3.0b2.
./apachectl status
Apache Server Status for dev.synop.com
Server Version: Apache/1.3.9 (Unix) PHP/3.0.12
Server Built: Oct 25 1999 00:37:07
3. Now it is time to test PHP with a page. The simplest thing to do is create a page called test.php3. My file is here. This file contains the
following text:
<?php phpinfo(); ?>
4. Point your browser at this file on the virtual host which you used:
http://localhost/test.php3

InBuilt Apache Web Server v2.0.58 on Solaris 10

Hi,
We are working on a custom application which works with the inbuilt Apache Web Server on the Sun Solaris platform. Here are the details of the versions of the various components involved:
Apache Web Server: Version 2.0.58
Platform: SunOS 5.10 Generic_127111-03
Our application is in the form of a shared library(.so binary) which is loaded into the Apache Web Server by mentioning the following directive in the Apache Web Server's configuration file (httpd.conf):
LoadModule at_module "/var/apache2/logs/sample/sample.so"
Where, sample.so is our application's binary
And at_module is the name of the module.
Problem details:
For each request to the Apache Web server, the server maintains a table of type "apr_table_t" which contains the header environment from the request. There is a structure "request_rec" maintained in the httpd.h file:
/** A structure that represents the current request */
struct request_rec {
/** The pool associated with the request */
apr_pool_t *pool;
/** Request method (e.g. GET, HEAD, POST, etc.) */
const char *method;
/** MIME header environment from the request */
apr_table_t *headers_in;
In our case, when we try to retrieve the address of "headers_in", we get a NULL Value. Please refer to the code for "sample-apache.cpp" program. Here it goes:
** Sample Program acting as a loadable Apache module.
** Overview:
** This sample program contains the necessary methods to make the program act as a module which can be loaded into the Apache ** Web Server. This program contains skeleton code which is necessary for any module which needs to be loaded into the Apache ** Web Server.
** Usage:
** 1) Compile and link this program to create a shared library.
** Compilation step:
** /opt/SUNWspro/bin/CC -c -o sample.o -I<Path to your include directory for Apache API's> sample-apache.cpp
** Link step:
** /opt/SUNWspro/bin/CC -G -compat=5 -mt -M map.SunOS -o sample.so sample.o -lsocket -lnsl -lpthread -ldl -lposix4 -lCstd ** -lCrun -lm -lw -lthread -lcx -lc
** 2) The sample program creates a module named "at_module" which can then be loaded in the Apache Web Server's configuration ** file, httpd.conf in the form of a configuration directive as shown below:
** LoadModule at_module "<Location of the shared library created from this sample program>"
#include "httpd.h"
#include "http_config.h"
#include "http_request.h"
#include "http_log.h"
static const char s_szInputFilterName[] = "INPUTFILTER";
extern "C" module at_module;
typedef struct
     int Enabled;
     char *szConfigFile;
     apr_array_header_t *input_filters;
} server_config_struct;
extern "C" apr_status_t ChildExit(void *p);
extern "C" apr_status_t ParentExit(void *p);
extern "C" int Init(apr_pool_t p, apr_pool_t pLogPool, apr_pool_t pTempPool, server_rec s)
void *data;
const char *user_data_key = "init_module";
apr_pool_userdata_get(&data, user_data_key, s->process->pool);
if(!data)
          apr_pool_userdata_set((const void *) 1, user_data_key, apr_pool_cleanup_null, s->process->pool);
else
          server_config_struct pConfig = (server_config_struct ) ap_get_module_config(s->module_config, &at_module);
          apr_pool_cleanup_register(p, s, ParentExit, apr_pool_cleanup_null);
          ap_log_error(APLOG_MARK, APLOG_INFO, 0, s, "Exit callback registered.");
          fflush(NULL);
return OK;
extern "C" void ChildInit(apr_pool_t p, server_rec s)
     apr_pool_cleanup_register(p, s, ChildExit, apr_pool_cleanup_null);
     return;
extern "C" apr_status_t ChildExit(void *s)
     return APR_SUCCESS;
extern "C" apr_status_t ParentExit(void *s)
     return APR_SUCCESS;
extern "C" int access_checker(request_rec *r)
     FILE * fp;
     fp = fopen("/var/apache2/logs/sample.txt", "a");
     fprintf(fp, "\n r->headers_in = %u, r->method = %s", r->headers_in, r->method);
     fclose(fp);
     return OK;
extern "C" apr_status_t input_filter_init(ap_filter_t *f)
     return APR_SUCCESS;
extern "C" apr_status_t input_filter(ap_filter_t f, apr_bucket_brigade pbbOut,
                                             ap_input_mode_t mode, apr_read_type_e block,
                                             apr_off_t readbytes)
     return APR_SUCCESS;
static void register_hooks(apr_pool_t *p)
     ap_hook_post_config(Init, NULL, NULL, APR_HOOK_MIDDLE);
     ap_hook_child_init(ChildInit,NULL,NULL,APR_HOOK_MIDDLE);
     ap_hook_access_checker(access_checker, NULL, NULL, APR_HOOK_REALLY_LAST);
     ap_register_input_filter(s_szInputFilterName, input_filter, input_filter_init, AP_FTYPE_RESOURCE);
extern "C" module AP_MODULE_DECLARE_DATA at_module =
STANDARD20_MODULE_STUFF,
NULL,
NULL,
NULL,
NULL,
NULL,
register_hooks
//End of sample
In this program, inside the access_checker() method, we try to retrieve the address of "headers_in" and get that as NULL:
extern "C" int access_checker(request_rec *r)
FILE * fp;
fp = fopen("/var/apache2/logs/sample.txt", "a");
fprintf(fp, "\n r->headers_in = %u, r->method = %s", r->headers_in, r->method);
fclose(fp);
return OK;
Here is the output of the sample program after accessing the main page of the Web server:
r->headers_in = 0, r->method = GET
r->headers_in = 0, r->method = GET
r->headers_in = 0, r->method = GET
Though we are able to retrieve one member of the structure request_rec (method), we are not able to retrieve the address of the other member (headers_in).
Observation:
We made an interesting observation that when we used the same sample program with the inbuilt Apache 2.0.52 Web Server on Solaris, we were able to successfully retrieve the address of headers_in. Here are the details of the set-up which is working fine:
Apache Web Server: Version 2.0.52
Platform : SunOS 5.10 Generic_118822-30
Thus, there is something different which has happened between the Sun's Solaris Apache Web Server's versions 2.0.52 and 2.0.58 which is making it unable to retrieve the address of the request headers (headers_in) in version 2.0.58.
Can sombody please help me find out the reson for this difference and let me know if we need to change the way of retrieving the request headers for Solaris Apache 2.0.58.
Thanks

Ok, found the problem:
Do not use this "SSL_RENEGOTIATE_NEVER" as a value for the environment variable:
NSS_SSL_ENABLE_RENEGOTIATION=SSL_RENEGOTIATE_NEVER;export NSS_SSL_ENABLE_RENEGOTIATION
instead, use "0":
NSS_SSL_ENABLE_RENEGOTIATION=0;export NSS_SSL_ENABLE_RENEGOTIATION
Add that line to your startserv script and it should disable ssl renegotiation permanently.
Regards,

Trying to get PHP (5.2.5) via Apache Web Server (2.2.13) to work.

From binaries.
1. I was able to get the command line execution of 01.php to work with php w/o
Apache.
2. I am able to get normal PHP to work in Apache and I'm able to load up some php
extensions that come with PHP such as php_zip.dll
which show up as loaded when I execute this php script via the Apache Web server:
<?php
phpinfo();
?>
3. I've tried both the CGI method and the apache module method of linking apache to PHP, but
still get the same following error in my Apache error logs.
PHP Warning: PHP Startup: Unable to load dynamic library 'C:/Progra~1/Oracle/Berkeley DB XML 2.4.16/bin\\php_db4.dll' - The specified module could not be found.\r\n in Unknown on line 0
PHP Warning: PHP Startup: Unable to load dynamic library 'C:/Progra~1/Oracle/Berkeley DB XML 2.4.16/bin\\php_dbxml.dll' - The specified module could not be found.\r\n in Unknown on line 0
4. I've tried to move these two dlls to the /ext directory as well, but no joy.
5. What confuses me is that it works on the command line, but not through Apache.
Since they work on the command line, the dlls are proper dlls, correct?
What could be causing them not to work from Apache?
6. In my google searching on other php dlls, there are references that certain php dlls are dependent upon other dlls to be in the path. Does anyone know if there are any other dependecies for two dlls in question? And is it that php command line can find these dlls, but when apache starts up, it doesn't have access to these other dependent dlls?
7. Anyone have any insight, suggestions into this? Behavior?

I think 5.2.10 has mainly bug fixes in comparison to 5.2.5. If it works, I'd simply assume everything's fine.
Be aware, though, that there is a general caveat with using DBXML in an Apache/PHP environment. You cannot maintain state at the application level as with a Java application server. On each request, you'll have to reopen the environment and the containers you want to access. So it's not as effiicient as on a more suitable platform. Also, if the need to run recovery arises, it is not clear how you would handle this in a multi-process environment with no built-in means for coordination of those processes.
Michael Ludwig

Problem with inbuilt Solaris Apache Web Server v 2.0.58

Hi,
Set-up:
We are working on a custom application which works with the inbuilt Apache Web Server on the Sun Solaris platform. Here are the details of the versions of the various components involved:
Apache Web Server: Version 2.0.58
Platform: SunOS 5.10 Generic_127111-03
Our application is in the form of a shared library(.so binary) which is loaded into the Apache Web Server by mentioning the following directive in the Apache Web Server's configuration file (httpd.conf).
LoadModule at_module "/var/apache2/logs/sample/sample.so"
where, sample.so is our application's binary
and at_module is the name of the module.
httpd.conf file has been attached for your reference.
Attachments:
httpd.conf - Apache Web Server's configuration file.
sample-apache.cpp - Sample program which is showing the problem.
httpd.h - Apache Software Foundation's file which contains the structure "request_rec" that represents the current request.
Problem summary:
For each request to the Apache Web server, the server maintains a table of type "apr_table_t" which contains the header environment from the request. There is a structure "request_rec" maintained in the httpd.h file:
/** A structure that represents the current request */
struct request_rec {
/** The pool associated with the request */
apr_pool_t *pool;
/** Request method (eg. GET, HEAD, POST, etc.) */
const char *method;
/** MIME header environment from the request */
apr_table_t *headers_in;
In our case, when we try to retrieve the address of "headers_in", we get a NULL Value. Please refer to the attached "sample-apache.cpp" program. In this program, inside the access_checker() method, we try to retrieve the address of "headers_in" and get that as NULL:
extern "C" int access_checker(request_rec *r)
     FILE * fp;
     fp = fopen("/var/apache2/logs/sample.txt", "a");
     fprintf(fp, "\n r->headers_in = %u, r->method = %s", r->headers_in, r->method);
     fclose(fp);
     return OK;
Here is the output of the sample program after accessing the main page of the Web server:
r->headers_in = 0, r->method = GET
r->headers_in = 0, r->method = GET
r->headers_in = 0, r->method = GET
Though we are able to retrieve one member of the structure request_rec (method), we are not able to retrieve the address of the other member (headers_in).
Observation:
We made an interesting observation that when we used the same sample program with the inbuilt Apache 2.0.52 Web Server on Solaris, we were able to successfully retrieve the address of headers_in. Here are the details of the set-up which is working fine:
Apache Web Server: Version 2.0.52
Platform : SunOS 5.10 Generic_118822-30
Thus, there is something different which has happened between the Sun's Solaris Apache Web Server's versions 2.0.52 and 2.0.58 which is making it unable to retrieve the address of the request headers (headers_in).
I am requesting someone to kindly shed light on this difference and let us know if we need to change the way of retrieving the request headers for Solaris Apache 2.0.58.
Thanks,
Atul.

The only way you can achieve it is by running the web server to listen on port 80
Please change the port in your httpd.conf file for the webserver and restart it.
If any other processes are running/using on port 80 on that machine, then please stop them, otherwise you will not be able to achieve your requirement.
Arun

Jsp for apache web server

hi all,
i am new 2 the field of JSP & web servers.
i have installed apache web server on a unix box. i am invoking the jsp files from a win - 2000 machine.
i want to know if the apache web server can interprett the java code (JSP)that is embedded in html. if not what other web server should i use.
The jsp code is not being interpretted. the output for the foll code is:
HELLO WORLD
HELLO WORLD
<HTML>
<TITLE>
HELLO
</TITLE>
<BODY>
HELLO WORLD
<br>
<%= new java.util.Date() %>
HELLO WORLD
<% System.out.println("HELLO ALL") %>
</BODY>
</HTML>
Do i have to use some other server like Blazix or will apache web server do the job for me???
thanx in advance

Double-posted:
http://forum.java.sun.com/thread.jsp?forum=45&thread=388900&tstart=0&trange=30

NTLM for Apache web server

First, I didn't find a specific category in the forums for the Apache web server that comes with Oracle 8i and 9i, so if this isn't the right place, I'd like to know where it is.
Anyway, has anyone had success using NTLM with recent versions of Oracle's Apache web server? I had it working with 8.1.7, but when I upgraded to 8.1.7.3, it broke again. It doesn't work with 9.2 either. Oracle support was quite unimpressed that I had even tried it at all, but I think it is something that should be part of an intranet web server in a corporate environment, since Windows is on most desktops.
Thanks,
Andy Johnson

NT Lan Manager authentication for Apache? Are there even APIs published by Microsoft? On the other hand, I would not be surprised if a module exists. (then again Oracle would not support it for their variant of Apache=OHS)

Configure/installing apache web server (1.3.26) plug in for weblogic server 6.1

hi,
can any body know the exact steps to configure the apache web server which can proxy requests to weblogic server 6.1?
thanks in advance.

hi,
can any body know the exact steps to configure the apache web server which can proxy requests to weblogic server 6.1?
thanks in advance.

How to integrate Apache Web Server and Apache Tomcat 4.0 ?

<pre>
Hi All,
Can anyone give me a detailed description(or url that tells so) of how to install the Apache Web Server, Apache Tomcat Server4.0 and Integrate both of them.
Still now I am using Apache Tomcat 4.0 as a standalone application and now I want to learn how to install,use Apache Web Server and integrate this with Apache Tomcat.
Please point me to exact location,url to download the recent Apache Web Server and,
Can I use my existing Standalone Apache Tomcat 4.0 to integrate this with Apache Web Server that I am going to download.
A detailed explanation of how to integrate both is very helpful.
Thanks in advance.
<pre>

The way to integrate Apache Web Server & Apache is very easy. The first step is download the library to connect both servers. This library can be download from http://jakarta.apache.org/builds/jakarta-tomcat-4.0/release/v4.0/bin/webapp-module-1.0-tc40-windows.zip.
Copy the files to APACHE_HOME\modules and open httpd.conf to change any lines:
You find the section "LoadModule" and you add the next lines:
LoadModule webapp_module modules/mod_webapp.so
AddModule mod_webapp.c
And the end of the file you must add these lines:
WebAppConnection conexion warp localhost:8008
WebAppDeploy examples conexion /examples
The first parameter -2nd line- (examples) is the URL name application, the second is the connection's name and the last parameter is the application's name. This name is the same which in servlet.xml.
At last you can add one more lines to check the module's configuration:
WebAppInfo /webapp-info
If you visit http://<yoor_host>/webapp-info you can see the configuration.

Apache Web Server - urgent!!

I recently installed Oracle on Windows XP and the installation was successful.When I was trying to start the Apache Web Server the following error message appears:
[alert] <5> access is denied:fast CGI:create mutex() failed.
syntax error on line 92 of d:/oracle/ora90/sqlplus/admin/isqplus.conf: failed to create fast CGI application accept mutex
and the count down begins and the window automatically closes.
Can any one please suggest me the solution to this?

I did not experience this error before, but one workaround I can think about for this issue is to disable isqlplus.conf, this can be achieved by removing isqlplus.conf line from httpd.conf file. By doing this, your apache webserver should be able to startup, but iSQL*Plus will not work. One good thing to do before start up apache server is to run "apachectl configtest" to check syntax before starting Apache, it will sometimes provide some good troubleshoot information.
GQ
OCP 8/8i/9i

How to uninstall Apache web server from 9.2.0.7.0/windows

Hi All,
Due to security vulnerability issues we would like to uninstall the Apache Web server from the currently installed oracle 9i version 9.2.0.7.0 on the windows box.
One of the production database is associated with the current oracle version.
I really don't know is it possible to uninstall Apache Web server from the oracle version, if we can uninstall is there any documentation available from oracle metalink?
Please let me know what is the correct procedure to uninstall Apache Web server.
Thanks in advance,
karv.

Using the Oracle Universal Installer, click the uninstall button and see if the Web server appears in the list of installed products. If so you should be able to uninstall it there.

J2EE & Apache web server

Dear friends,
We are going to use open source Apache web server(with Tomcat), but can we use all J2EE components especially EJB in the Apache web server?
Thanks.

Dear friends,
We are going to use open source Apache web server(with
Tomcat), but can we use all J2EE components especially
EJB in the Apache web server?
Thanks.You can use Tomcat for the Web container. You can then select an application server to host the EJB container. See http://www.jboss.org/overview for details.
Christian

Is the Apache web server feature limited without OS X Server edition?

Similar Messages

Maybe you are looking for