Is the apple mini DVI to DVI 'D' and 'Male' or 'Female'

Hi all,
New to DVI and HDMI... So excuse me if this is an obvious question...
I plan to buy the Apple mini-DVI to DVI cable. My lcd tv only has HDMI... I believe a female input.
I plan to buy a third party DVI to HDMI cable. The one I am looking at is a Male DVI-D to Male HDMI cable.
Will the DVI at the end of the Apple cable work with the DVI-D Male third party cable?
Many thanks.
Regards,
Alan

Just about anywhere has DVI to HDMI cables. The HDMI will plug into your TV with a male end from the cable to the female of the TV. The Mini DVI adapter will plug into you MacBook with a male end to the female of the MB. The cable you have (the DVI to HDMI) should have a male end (the one with the prongs) which is inserted into the Mini DVI to DVI cable you get from Apple.

Similar Messages

Will the Apple mini DVI to video adapter work with a macbook? What to Buy?

I went to my local Apple Reseller and asked for a mini dvi to video adapter to use to connect my macbook to a tv using either s-video or the yellow RCA cable. I was told that they only had the one that was for an ibook and Power book and that this would not work with a Macbook. I would need a different one. Is this correct. If so, what do I need? I have looked on the online Apple Store and cannot find anything that fits this description. They only list one type of Mini DVI to tv adapter? I just want to be able to connect my Macbook to a TV.

As it happens, I just bought the mini-DVI to video connector for my wife's Macbook (C2D) yesterday. I am in Australia (which is a PAL country), but I didn't see anything on the device or the packaging which indicated it as being PAL-specific. In fact, in Display Preferences when it is connected to the Mac and TV and in use, the panel relating to the TV output (which is shown by the Mac on the TV screen) is where you select between PAL-50Hz and NTSC-60Hz, so I'd guess it is a single worldwide device, rather than their being separately-manufactured PAL and NTSC variants of the connector.
Anyway, on the back of the top cardboard part of the packaging is a picture of the connectors (because you cannot really see the pins in the Mini-DVI connector itself when packaged, due to an opaque plastic "keeper" over the end of the plug).
To reconfirm what is said above, the pin configuration on the mini-DVI port on the MacBook and what you need on the Mini-DVI connector is a horseshoe or "U" shape. I don't remember if any specific model of Mac is listed, but I believe as long as it is that U-shaped connector you'll be fine with the same connector kit.
The "mini-VGA to video" connector is not what you want for a MacBook; mini-VGA is not "U"-shaped inside, but rather two rows of pins in "II" configuration (even though the outside dimensions of mini-VGA and mini-DVI look very similar).
ted.h.
Mac Mini (Pro Duo) and MacBook (C2D) Mac OS X (10.4.8)

Apple Mini-DVI to Video Adapter

I have just purhased a new Macbook. My first mac ever
My question is regardng the Apple Mini-DVI to Video Adapter.
Do I read that correctly that I can hook my macbook up via rca and s-video but not composite? Does Apple make one cable that will do both?
I would like the ability to hook up to a projector which will likely be composite. As well RCA/S-video via t.v or DVD inputs.
Thanks
Tig

For VGA you will need the Mini-DVI to VGA adapter. For composite video you will need the Mini-DVI to video adapter. If you want sound while using the video adapter you will need a 3.5mm to rca stereo cable. This is a y cable like this Example of 3.5mm to RCA Y cable
FYI the RCA output on the video adapter is composite video.

Apple Mini-DVI to Video Adapter Question

I want to hook up my macbook (late 2008 model) to my tv. Will the Apple Mini-DVI to Video Adapter
work? If it will work on my tv then what else do I need to get? It looks like you need other wires to hook up to your tv? Thanks in advance for your help!

The new MacBooks that use the NVIDIA 9400M video chip do _not_ support output to analog TVs. Thus, with the current MacBooks the only way to get output to an analog TV is with a third-party VGA-to-analog TV converter box -- you can't just use one of Apple's cables (although you'll need the mini display port to VGA adapter cable to connect to a third-party VGA-to-TV converter box).
More specifically, you can _not_ use one of Apple's $19, DVI to Video (composite/S-Video) adapters on the new MacBooks.
See also this discussion:
http://discussions.apple.com/thread.jspa?threadID=1927674&tstart=15

Apple Mini-DVI to Video Adapter Questions

I'm in the processing of producing an instructional video using an Intel Core Duo iMac and iMovie. This content will be distributed primarily via broadcast over cable TV. Considering this, I'd like to be able to edit and view my dv footage on a TV monitor as I work.
I was told by the Apple Store person that the Apple Mini-DVI to Video Adapter (http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/6314001/wo/jY18n ncCp3Nx2tYjws52iCaPkH1/1.0.21.1.0.8.25.7.11.2.3) will enable me to
1. Mirror my desktop to simultaneously show me what my iMovie edits will look like on a TV; and
2. Enable me to edit in iMovie using the TV as my desktop.
Am I understanding the capabilities of the Apple Mini-DVI to Video Adapter correctly?
Regarding Cables
1. I currently use an RCA composite cable to view dv footage from my camcorder directly on the TV. Is this the same cable I'd attach to the Mini-DVI to Video Adapter?
2. The DVD recorder/player my TV signal is routed through has an s-video port. Is there a benefit to using an s-video connection in addition to/or instead of the RCA connections?
Thanks for helping me understand this setup scenario!
core duo Mac OS X (10.4.6)
core duo Mac OS X (10.4.6)

Ditto to Karsten's post:
"Mirroring" a Mac's output to a TV, or plugging in an adaptor to provide a display on a Mac's screen and simultaneously on a TV ruins the Mac's display while this is happening by lowering its resolution. Ugghhh! (..I've tried this several times, in order to get a 'TV' signal out, showing the Mac's desktop, but it's hopeless..)
Karsten's method is the best - output to camcorder via the normal FireWire cable, and plug a TV or monitor into the camcorder's A/V Out socket!
[..Note, though, that Matti has pointed out that - what was it..? - during editing, some updating of the TV-thro-camcorder display doesn't work correctly. I can't remember exactly what the problem was, and I don't see it mentioned on Matti's Bugs Page, but there was some slight oddity. Nevertheless, this is still the best way of viewing on a TV or monitor..]

Apple Mini-DVI to Video Adapter and Mac mini (2009)

Can anyone tell me whether the Apple Mini-DVI to Video Adapter listed here:
http://store.apple.com/ca/product/M9319G/A
works with the latest Mac mini (early 2009)?
If it does not what other solutions are there to connect to composite, component or s-video?

KC from Ann Arbor, MI had this to say as a review on the page to which you have linked;
10-May-2009
I bought a Mac Mini (May 2009) and this Mini-DVI to Video adapter with plans to use it to send an S-video signal to an analog TV. Though the sales staff at the Apple store said it should work, it does not. The graphics card apparently should support it, and it may be addressed with a future driver update, but as of now this does not work. I have used a mini-DVI to VGA adapter and monitor to verify that the port is working, and also verified that the S-video cable and TV input work. There are third party VGA to S-video/RCA adapters available so I plan to use one of those for my purposes. This is probably a 5-star product when used with the right Mac; however, Apple should have made it clear that having a mini-DVI port on your Mac is necessary but not sufficient for this to work - hence the 3 stars.

Apple Mini-DVI to Video Adapter - Can't get it to work!

Bought the Apple Mini-DVI to Video Adapter to hook up my Macbook to my TV. I tried it when it first arrived and it worked within minutes of setting up. Great! I go to set it up and use it again a week later, and it wouldn't work at all. I went through every possible setting I could to try and get it to work, nothing. Do these things have a tendency to go out or short out or something? I'm getting nothing but scrambled screens, grey screens, etc. Nothing seems to work.
http://store.apple.com/us/product/M9319G/A?mco=MTY3ODQ5OTY
Any other solutions for playing my laptop on my TV?

Hey Rob,
Is your profile information accurate? The MacBook 2,1 was introduced in November of 2006 and discontinued in May of 2007, so the mini-DVI to video adapter ought to work.
What, exactly, do you see on your screen? Are all of the connections nice and snug? Do you have another RCA cable you can try? You can use a white or red one if you want; they all will work as long as you're connecting the video adapter to the yellow port on the TV.
~Lyssa

Video Out w/Apple Mini-DVI to Video Adapter

Ok this should be an easy question to answer.
I've tried searching but I can't seem to find a straight answer.
All I want to do is watch stuff from my macbook on my tv. I have purchased the Apple Mini-DVI to Video Adapter.
All I want to know is what cable to I need from the Apple Mini-DVI to Video Adapter to the tv. A name or something or even the place to get it would be very helpful. Thanks!

The answer depends on which video-in connections your TV has. There are several possibilities, but you're going to have to tell us more about your TV.
If you have an analog (not HDTV) then it probably has either or maybe both s-video or composite video-in. If you have a choice, s-video is better than composite video.
If you have an HDTV, it probably has both s-video and composite video but may also have VGA, DVI or HDMI video-in. VGA, DVI and HDMI are all digital and would be better than s-video or composite. But, again, s-video would be better than composite.
Keep in mind, the mini-DVI to video adapter is video only. You're also going to have to find the cables to plug your MacBook into the TV or stereo to get the audio.
-Doug

Will Apple Mini-DVI to Video Adapter device work on HD TV's?

I have a Macbook. Will using just the Apple Mini-DVI to Video Adapter work for me if I have and HD TV so that I can watch movies from the Internet on the HD TV screen? How good will the quality be compared to watching on the Macbook itself? And I've noticed how short the chord is for the Apple Mini-DVI to Video Adapter. Will I have to buy another chord to make it reach the back of the HD TV? Thanks.

As it happens, I just bought the mini-DVI to video connector for my wife's Macbook (C2D) yesterday. I am in Australia (which is a PAL country), but I didn't see anything on the device or the packaging which indicated it as being PAL-specific. In fact, in Display Preferences when it is connected to the Mac and TV and in use, the panel relating to the TV output (which is shown by the Mac on the TV screen) is where you select between PAL-50Hz and NTSC-60Hz, so I'd guess it is a single worldwide device, rather than their being separately-manufactured PAL and NTSC variants of the connector.
Anyway, on the back of the top cardboard part of the packaging is a picture of the connectors (because you cannot really see the pins in the Mini-DVI connector itself when packaged, due to an opaque plastic "keeper" over the end of the plug).
To reconfirm what is said above, the pin configuration on the mini-DVI port on the MacBook and what you need on the Mini-DVI connector is a horseshoe or "U" shape. I don't remember if any specific model of Mac is listed, but I believe as long as it is that U-shaped connector you'll be fine with the same connector kit.
The "mini-VGA to video" connector is not what you want for a MacBook; mini-VGA is not "U"-shaped inside, but rather two rows of pins in "II" configuration (even though the outside dimensions of mini-VGA and mini-DVI look very similar).
ted.h.
Mac Mini (Pro Duo) and MacBook (C2D) Mac OS X (10.4.8)

Not detecting tv display when connected with Apple Mini-DVI to Video Adapte

I am connecting my macbook to my older tv using a Apple Mini-DVI to Video Adapter to an RCA (yellow video prong) and then into the tv. The red and white audio prongs hang loose, not hooked into anything on both ends. When I go into Displays there is no option for mirroring displays. I hit 'detect displays' but nothing happens. The Apple Mini-DVI to Video Adapter is brand new, just ordered it from apple. And I use the RCA cord all the time with other machines into my tv and it works fine.
Any help is really appreciated. Thanks!

Which generation MacBook do you have because at some point Apple dropped support for that adapter. Here is a link to a list of Apple adapters and compatible computer models:
http://support.apple.com/kb/HT3235

Apple Mini-DVI to DVI Adapter

Ok I have this adaptor and the RCA out one to. My question is do they sell a extension to connect to the Mini-DVI end that will make it longer so I can connect my 20in Cinema Display to my 20in Intel IMAC I can do it now, but this is the way I have it set up now, I have a shelve with the PC up on top off to my Right and the Cinema Display is also on the Right side of my L Shaped Desk and If I want to hook my Display up to the IMAC which is off to the Left I have to Disconect it from the PC up top then bring down the cord all the way over to the IMAC and then Unplug the Display its a very big Task to do. I would just like to get either a DVI extension to plug into the Display or a Extension for the MINI-DVI part to connect to the Apple Mini-DVI to DVI Adapter to make that longer so I can reach it up to the Top shelve so I can just swap them when I want to. If anyone knows if they sell that. That would be cool, I have not been able to find anything yet.

I actually think I found what I need now. Found a Male To Female 3 foot Exetension, So Thanks to anyone Who was going to Answer to this or was thinking about it

Apple Mini-DVI to RCA

Can anyone tell me which cables I need to purchase from Apple to go from the
Apple Mini-DVI to Video Adapter to the back of my tv (RCA tri-color connector)? After looking at most of the discussions, I typically see a generic statement saying I need the adapter and separate cables, my question is what specific cables?
Thank you all in advance.

The adapter looks exactly like the output on your mac and then turns into the three RCA (yellow, red, white) that plug into your tv. The only thing besides the adapter you will need to purchase is a longer cord to plug in from your adapter to your tv.

Apple Mini DVI to DVI Adapter to connect Win7 tower to iMac / Target Display Mode

I currently run Windows on bootcamp on the iMac (Mid-2011), although the tasks I perform (3D modelling, rendering and such) cause the Mac to get very hot, and as a result hae a slight burn mark on the LED LCD screen.
I am buying a Windows machine, and am to uninstall bootcamp and use the Mac purely for OSX, but use the iMac screen as a monitor for the tower using Target Display Mode. My issue is - the Windows 7 tower only has DVI output. And as I understand, the Mid-2011 iMac only supports Target Display Mode via a thunderbolt cable.
My question is - Will the Apple Mini DVI to DVI adapter allow me to connect the DVI-only tower to the iMac? Thanks in advance x

Oh, I should mention also that the iMac is the 27" model. Mid-2011 3.4Ghz Intel Core i7 with 4GB RAM and 1TB Harddrive. And ATI HD5450 1GB Graphics.

Apple Mini DVI to DVI Adapter - Too short?

I want to connect my iMac 2.8 ghz, 24" screen to an external Philips 190B LCD monitor and use the Extended Desktop function.
The Philips Monitor model is the 190B6CG/00 and it is a single link monitor (Philips tell me it is DVI-D Receptacle Connector 24 pin = single link).
I'm looking at the Apple Mini DVI to DVI adapter here on the Apple Store. It looks like it should plug into my iMac one end then the other end into my Philips. However it looks like it is too short to reach my Philips Monitor. They are not a fantastic distance apart. In fact they are sat side by side - but I somehow can't see the Apple Adapter being long enough (unless it crosses a 3-sphere).
Presumably then, some sort of extension is required between the DVI end of the Apple adapter and the Philips Monitor's DVI input.
Does anyone know what this extension could be and where is may be purchased?
Regards

Hello to everyone who has replied to my cry for help.
Thank you all. I will apply points to everyone who has responded (so quickly too).
Scorpie
I totally agree. I have been thinking along these lines too. However, searching on the internet whilst researching, I found it difficult to decide what I needed because of the 'photos' supplied. They were ok as such but most didn't show very well the pin outs. Further research into the matter (and one website in particular - i.e. Maplin) made me realise that GENDER was involved. Also, with DVI, females look like males in web photos until you find a photo from the right angle. Same goes for VGA I reckon.
I'm certain most people looking at DVI (and VGA) cable/connectors can't tell the difference when the devices are only viewed from 'above' . In my opinion they need to be viewed more or less end-on to show where they have pins or holes. I mean full end-on, not at an angle where (as I found above) detail as to pin or hole is lost in digital or compression noise. This is what I have experienced in all but one of the web sites I have visited. Another thing, most websites have an 'enlarged version' button which, if selected, shows the same photo exactly the same size. No help whatsoever. But then there's no doubt you must already be well aware of this.
MyHighway
You are correct. The Philips did come with a VGA cable. However I want to connect to my iMac digitally (if I can) using DVI (it looks like a 'female' connector on inspection of the back of the Monitor). I have found it almost impossible to tell the difference from most photos on the web even with my new huge screen iMac. One of the reasons I'm am a little nonplussed I think.
mrtotes
Good point. If I take a photo of the back of my Philips and take the Apple connector down to Maplin perhaps I can compare and contrast with real specimens. Yo!!
I think I will give that a go.
You have all been very helpful indeed. Opened my eyes somewhat.
I wish a Merry Christmas to all my new Mac friends

Apple Mini DVI to DVI Adapter - Gender Question

The Apple Mini DVI to DVI Adapter photograph in the Apple Store looks like the DVI end is female.
Is this correct?
The Overview photo is good because it made me aware that I needed more than just the adapter itself to use it, but I think it would help if an "end-on" view could also accompany the view of this product - just for old fogeys like me.
I'm sure that some sort of industry 'convention' must exist so that I could use to determine this for myself. Be jiggered if I could find one though.

Yes, the end is female. That makes it the same as if the connector were built-in. For example, the connector on the MacBook Pro is a female DVI. So you would need the same, and very common, DVI male-to-male connector to hook up a monitor. You don't need any extra adapters. Just the cable. Or if you have an Apple Cinema Display, the correct cable is already attached to the monitor.

Is the apple mini DVI to DVI 'D' and 'Male' or 'Female'

Similar Messages

Maybe you are looking for