Is the baseline 11.6" Air sufficent to run Photoshop?

I'm tryng to choose between the 11.6" Air and the 13.3" Pro.
I want to know if the baseline 11.6" Air sufficent to run Photoshop? That's the most taxing software I will be running. I might use this laptop for school in some graphic design classes, but this won't be for anything professional at all.
Thanks for looking!

Thanks for the replies!
Yes, this would be a primary task. Nothing too intensive though, just recreational use. Making signatures for forums, wallpapers, misc. pieces. And possibly for classes too.
What's the real world difference between 2GB and 4GB? Can 2GB handle PS at all, just a tad slower? Or will it just not run well at all on less than 4GB?

Similar Messages

Should i return my macbook pro 13 inch and get the baseline 13 inch air?

i recently bought the 13 inch baseline mbp non retina. I am majoring in mechanical engineering and thsi will be my junior year so my main programs i will be using will be matlab, c++, and maple. I was wondering if i should return this and get the new macbook air 13inch with the 128 gb ssd. my main concerns are that the processor is not powerful enough and the ram is too low and the hard drive is too small. let me know what you think. some things that i really like are the battery life and the new wifi? Please give me any information that could help my decision. I do plan on upgrading my ram from 4gb to 8gb in a few weeks.

If you buy an AIR, you will be locked into whatever it has. For life. The regular model can be upgraded in both the RAM and the drive, be it an HDD or an SSD.
If you determine you need better graphics performance, get a 15" regular instead. Has twin GPUs and vastly better graphics results.

Does the macbook air i7 (2014) runs hot?

i wanty to know if the 13 inches macbook air model 2014 run hot or not for avrage user.
like browsing, microsoft office or watching movies.
for those cases, does this machine run hot in a way you cant put it in your lap or not comfortable?
and second question please, does runung paralles on i7 makes macbook air get hot?

Mine has started running hot almost as soon as I open it up. The battery life is down to about and hour and a half of continuous running because the fan is going constantly! Anyone have any ideas???

I have an Air running Mountain Lion. I also have a digital point-and-shoot camera, but have never downloaded any images from the camera to this Air. If I connect the camera to the Air, what might I expect? Will connecting the camera to the Air by a cable

I have an 11" Air with lots of remaining capacity running Mountain Lion. I also have a digital point-and-shoot camera. I have never downloaded images from the camera to this Air. However, if I just connect the camera to the Air's USB port, with the camera's available cable, and the Air is open, will a program like ImageCapture or iPhoto, auomatically come up, and I can begin to download wanted images? Or, will this sort of connection delete or fry everything on the Air? Do I need any other software on board? Will current Apple onboard programs allow me to download images from my camera and not destroy everything else?

Answered. Thanks.

How to measure the baseline of a noisy, pulsed signal

Hi
I am measuring the torque exerted by a large motor on a shaft using a load cell and lever arm. The shaft runs at approx 150 rpm. I have attached a drawing that shows the output I get. This is a test rig.
I have written some code that measures the maximum peak out of a group of approx 5 peaks and writes this to a shift register. This gives me an idea of the maximum torque "spike".
I also wish to measure the baseline torque (due to the bearings in the machine). Even when highly filtered (my noise filter is set to 49Hz) the signal exhibits this noise which is probably due to vibration in the system. The signal is zeroed when the motor is not running.
Does anyone have an ideas on how to measure the "baseline" torque? The large spike in torque prevents me from doing a running average. Can anyone think of a way of averaging just the noisy part of the signal to get an average value? I aim to to subtract the average baseline torque from the peak value to get an idea of the torque due to the event which causes
the spike.
Any help would be greatly appreciated.
Many thanks.
Attachments:
drawing of torque signal.gif ‏26 KB

Thanks for the reply. I understand what you are saying. However, I might have to modify my method for measuring the peaks if I choose to implement your idea. I have taken a screenshot of my "peak finder" code and attached it.
Bascially, the reset terminal is wired to a timer which outputs a pulse every few seconds. This resets the vi (a standard NI one I think) and sets the peak magnitude back to zero. This way, I am windowing the signal and measuring the maximum peak in every window. This is what I need to do.
So I could use a logical filter to feed data to the running average only if;
the amplitude of the signal is less than a certain threshold
and if the current value has similar low peaks either side of it
How would you construct the code to delay the evaluation so that the values in front and behind of the current data point can be analysed?
thanks again
Attachments:
peak_find_screenshot.jpg ‏45 KB

Is there a way I can stream video from my 2012 AirMac to the Apple TV using airplay and at the same time stream the audio to an air speaker?

Is there a way stream video from a 2012 MacBook Air to a TV using Apple TV and at the same time steam the audio to an air speaker. Also the same question but using an ipad

You can try one thing. Follow these steps:
1. On your Mac, turn on AirPlay Mirroring and connect it to the Apple TV, so audio and video will stream from the Apple TV.
2. Turn off the sound of the TV where you have connected the Apple TV.
3. Then, make sure that you have turned on the AirPlay speakers. Then, open System Preferences > Sound > Output, and choose the external speakers, so sound will stream from these external speakers.
This should work correctly

Getting the below error when running the Baseline.grf for the first time

I am getting the below error when running the Baseline.grf for the first time.
Appreciate your support in resolving it.
Error below:
INFO [main] - *** CloverETL framework/transformation graph, (c) 2002-2012 Javlin a.s, released under GNU Lesser General Public License ***
INFO [main] - Running with CloverETL library version 3.2.1 build#63 compiled 04/01/2012 12:53:21
INFO [main] - Running on 4 CPU(s), OS Windows 7, architecture amd64, Java version 1.6.0_20, max available memory for JVM 901120 KB
INFO [main] - Loading default properties from: defaultProperties
INFO [main] - Graph definition file: graph/Baseline.grf
INFO [main] - Graph revision: 1.114 Modified by: mkressirer Modified: Thu Apr 12 13:27:18 EDT 2012
INFO [main] - Checking graph configuration...
INFO [main] - Graph configuration is valid.
INFO [main] - Graph initialization (Baseline)
INFO [main] - [Clover] Initializing phase: 0
INFO [main] - [Clover] phase: 0 initialized successfully.
INFO [main] - register MBean with name:org.jetel.graph.runtime:type=CLOVERJMX_1306871483270_0
INFO [WatchDog] - Starting up all nodes in phase [0]
INFO [WatchDog] - Successfully started all nodes in phase!
INFO [RUN_GRAPH1_0] - Running graph ./graph/InitDataStore.grf in the same instance.
INFO [RUN_GRAPH1_0] - Checking graph configuration...
INFO [RUN_GRAPH1_0] - Graph configuration is valid.
INFO [RUN_GRAPH1_0] - Graph initialization (InitDataStore)
INFO [RUN_GRAPH1_0] - [Clover] Initializing phase: 0
WARN [RUN_GRAPH1_0] - WS messenger cleanup failed.
java.lang.NullPointerException
     at org.apache.axis2.client.Stub.cleanup(Stub.java:134)
     at com.opensys.cloveretl.component.WebServiceClient.free(Unknown Source)
     at org.jetel.graph.Phase.free(Phase.java:487)
     at org.jetel.graph.TransformationGraph.freeResources(TransformationGraph.java:681)
     at org.jetel.graph.TransformationGraph.free(TransformationGraph.java:955)
     at org.jetel.graph.runtime.PrimitiveAuthorityProxy.executeGraph(PrimitiveAuthorityProxy.java:149)
     at org.jetel.component.RunGraph.runGraphThisInstance(RunGraph.java:511)
     at org.jetel.component.RunGraph.runSingleGraph(RunGraph.java:409)
     at org.jetel.component.RunGraph.execute(RunGraph.java:302)
     at org.jetel.graph.Node.run(Node.java:414)
     at java.lang.Thread.run(Thread.java:619)
WARN [RUN_GRAPH1_0] - Some graphs wasn't executed (because graph "./graph/InitDataStore.grf" finished with error).
WARN [RUN_GRAPH1_0] - Some graph(s) finished with error.
ERROR [WatchDog] - Graph execution finished with error
ERROR [WatchDog] - Node RUN_GRAPH1 finished with status: ERROR caused by: Graph './graph/InitDataStore.grf' failed!
ERROR [WatchDog] - Node RUN_GRAPH1 error details:
org.jetel.exception.JetelException: Graph './graph/InitDataStore.grf' failed!
     at org.jetel.component.RunGraph.execute(RunGraph.java:324)
     at org.jetel.graph.Node.run(Node.java:414)
     at java.lang.Thread.run(Thread.java:619)
INFO [WatchDog] - [Clover] Post-execute phase finalization: 0
INFO [WatchDog] - [Clover] phase: 0 post-execute finalization successfully.
INFO [WatchDog] - Execution of phase [0] finished with error - elapsed time(sec): 2
ERROR [WatchDog] - !!! Phase finished with error - stopping graph run !!!
INFO [WatchDog] - -----------------------** Summary of Phases execution **---------------------
INFO [WatchDog] - Phase# Finished Status RunTime(sec) MemoryAllocation(KB)
INFO [WatchDog] - 0 ERROR 2 20132
INFO [WatchDog] - ------------------------------** End of Summary **---------------------------
WARN [exNode_0_1306871483270_RUN_GRAPH1] - Attempt to unregister non-registered thread in the ContextProvider.
./graph/InitDataStore.grf: Execution of graph failed! Error during graph initialization: Phase 0 can't be initilized.
INFO [WatchDog] - WatchDog thread finished - total execution time: 2 (sec)
INFO [main] - Freeing graph resources.
ERROR [main] - Execution of graph failed !

It can't find an Endeca specific class when running via the clover command line utility. Thus, the classpath being set in that shell script is not incorporating the .jar files where the endeca-specific classes are packaged. I would start by adding an line to see what your classpath is set to. There are actually already some lines of shell script in clover that you can uncomment to see what .jars are getting loaded:
#echo $CLOVER_LIB/*
for i in $CLOVER_LIB/*.jar $CLOVER_LIB/*.zip; do
     LOCAL_CLASSPATH="$LOCAL_CLASSPATH:$i"
done;
#for i in `ls $CLOVER_LIB/*.jar`; do
#echo $i
#done;
You could also echo LOCAL_CLASSPATH to see what is getting set there. At the end of the day, you will need the endeca-specific jars to load which can be found here: /Endeca/Discovery/2.3.0/Integrator/plugins/com.endeca.latitude_1.0.0/*
HTH,
Dan
http://branchbird.com

I would like to copy my iPhoto (9.4.1) library from my Mac Pro (10.7.5) to a Macbook Pro (10.7.5). Can I drag the iPhoto Library to Air Drop and send them to the MacBook? Will that then be a usable iPhoto library on the Macbook?

I would like to copy my iPhoto (9.4.1) library from my Mac Pro (10.7.5) to a Macbook Pro (10.7.5). Can I drag the iPhoto Library from the Pictures folder to Air Drop and send them to the MacBook? If I then move that to the Pictures folder on the MacBook will that then be a usable iPhoto library on the Macbook?

It would be better if you could connect the two Macs via a hard wired LAN to copy the library from the Mac Pro to the MacBook. Wireless connections can have momentary dropouts which could affect the reliable copying of files.
If you do go with Air Drop be sure to open and inspect the copied library closely to confirm it was a successulf copy.
OT

Should I upgrade to the i7 processor on the 2012 11" Macbook Air?

I'm planning to get a new Macbook friday or so, and I'm curious to whether or not I should upgrade to the i7 processor in the 2012 11" Macbook Air. I do a lot of photoshopping and occasionally playing Sims 3, but aside from that it's just usual typing and social networking type stuff. Is upgrading to the i7 worth it and will I notice a difference? Or should I just go for upgrading the RAM to 8GB instead of the 4GB it comes with? I also am for sure getting the 256GB upgrade, as well as a case and external disc drive. Whatever the lowest pricing possible would be preferable to get what works best for me.
Thanks!

Difference between i5 1.7 and i7 2.0 definitely won't give you extra year or two... In fact in everyday work it remains unnoticed.
Unless while encoding video for 5 minutes, some 15 seconds is going to make a difference to you - I am not sure it's worth the money (only you can decide that..).
RAM. RAM. RAM is where you really should spend money. Also SSD, depends on your needs, you may run out of space quite quickly. These are elements that will give you additional year or two, and you can't* upgrade them in the future.
*) SSD technicaly can be upgraded, but it's much more difficult and requires you to purchase 3rd party SSD modules, and is considered non-upgradable by Apple.

I got a text saying that if I don't pay my bill, my service is going to get cut off by the end of the day. I don't have the funds to pay it in full, so I paid half the amount. Would that suffice? Or would I have to pay it in its entirety to save my accoun

I got a text saying that I don't pay my bill, my service is going to get cut off by the end of the day. I don't have the funds to pay it in full, so I paid half the amount. Would that suffice? Or would I have to pay it in its entirety to save my service from being cut off?

As it was pointed out making prior arrangements could of helped extend the time you need to get your account back in order..
But if you have to have the phone and its the only thing you have to make calls, I would try other means ( Family, Friends, or other ) to get the rest of the balance payed and you can pay at a Corporate store using the stores Kiosk machine.! You can pay with Cash, Credit or I think with a check but using a check I'd ask the Local store how the policy is on that..
Hope that Helps.! Good luck..

Billing created on date as the baseline date in FBL5N

Hello All,
We have a requirement where the baseline date in FBL5N (BSEG-ZFBDT) should be the Billing document created ( VBRK-ERDAT) and not the accounting document created on date.
I tried changing the Payment terms to "Document date" but it does not work either. The fields in the payment terms for base line date ( Document date, posting date, entry date ) refer to the accounting document and not the Billing document.
Please let me know how to go about this.
Thanks for your help in advance.
Thanks,
Nagaraju

Hi,
I face similar problem but not involving TRM.
I've payment term set-up in OBB8 and stating default baseline date = document date.
But in FBL5N system is always retrieving posting date as baseline date. Is there any other setting prevailing over payment term definition?
Regards,
Baptiste

Required to change the Baseline Date in the MIRO Invocie Document

Dear Friends,
According to the Payment Terms, while doing the MIRO, the Baseline Date getting populated corresponds to the Document Date. However, the users need to replace the same with the GR Date. Is there a way to check for the GR date or the Delivery Date from the Invoice Verification screen layout?. In view of high volumes, the users do not want to go for another step of scrutinizing the PO History to know the GR date and instead desire to find the same from the Invoice Verification step itself. Is there a way to do this?
Thanks for the help.
Regards

Hi,
You need to use substitution with exit (GGB1/ OBBH) to populate the GR date in the baseline date field.
Also go through the below thread:-
[Re: Substitution - Baseline Date to be replaced by the Goods Receipt date;
Regards,
SDNer

Add the baseline date , posting date and the item text in the Standard Prog

Have to add some parameters in MRRL transaction Program is RMMR1MRS and apply some calculation part in it.
 The additional fields External PO (EKKO-ZZEXT_PO_NO) and Interface ID (ZZINTERFACE_ID) are added in the ZMRRL and will be used as the extra selection criterion along with the standard available in the MRRL.
 In the processing option, baseline date (ZFBDT) and posting date (BUDAT) will be added, the default selection for the same is blank.
Moderator message: "spec dumping", please work yourself first on your requirement.
Edited by: Thomas Zloch on Oct 3, 2011 11:00 AM

Hi,
You need to use substitution with exit (GGB1/ OBBH) to populate the GR date in the baseline date field.
Also go through the below thread:-
[Re: Substitution - Baseline Date to be replaced by the Goods Receipt date;
Regards,
SDNer

In P6 version7 not able to copy project with the baseline.

Hi,
In P6 version 7 it is not able to copy project with the baseline. It copies only the schedule.
Please help.
regards,
Baber.

Tried the solution from another thread but did not work completely (as warned) - the workaround didn't quite work for me either:
https://discussions.apple.com/thread/1398462?start=0&tstart=0
Ended up taking a backup, did a fresh install, created the account as the first one so that it gets the same UID as the other Mac (on which my account was the first) and restored my data - was painful but finally on track.

Is the current 13" MacBook Air powerful enough to run 2D autocad in bootcamp smoothly? If so, how will it handle 3d rendering software such as Rhino.

My girlfriend has recently purchased the new 13" Macbook Air (3rd gen Intel processor). It is the base model (ie. 1.8GHz i5 processor, 4GB RAM, etc).
I have checked on the autodesk website for their Windows 64-bit autocad system requirements and they all seem to be met, even to the recommended levels. However we havent actually tried running it because we havent gotten a copy of Windows on the machine yet. Also, she has a rendering software called Rhino, which ran fairly smoothly on my pc (its about 2 years old but was top of the line then), but I feel we are not up to par on the system requirement "OpenGL graphic card recommended".
If anyone could offer some guidance as to weather we should keep the MacBook Air it would be appreciated. I think the alternative would be to buy a Windows laptop because of cost, which wouldn't be nearly as exciting.

It's not a hard core gaming rig, but it plays all the FPS games I like, quite well. It handles hi-def video, just fine. I use it for Photoshop, and it is quite fast. For web browsing, it has no equal. The 2010 maxed out 11" would do it all, except for some hi-def video (1080P), which it would stutter. But my new 2011 maxed 13", is perfect for video (1080P=no problem).
I really don't think a MBP will give you as much, on a daily basis. It (the MBP) has only a few advantages, and except for the built in optical drive (which you can still go external, if need be), none of the advantages you will miss even slightly.
I think the MBP would only serve me, if it spent most of the time deskbound, but I would still need an SSD. Once you have had an SSD, you can't go back. Then, you would have a really pricey MBP.

Is the baseline 11.6" Air sufficent to run Photoshop?

Similar Messages

Maybe you are looking for