Is the built in microphone in the iPad 2 3G under the warranty

My microphone is broken, when ever I record something, it is all fuzzy. Is it under warranty?
Thanks!

I saw one post where a user said dust got inside the small microphone hole. Using a vacuum cleaner removed the dust and restored the audio.
 Cheers, Tom

Similar Messages

  • Is their a way to adjust the input for the built in microphone for my iPad?

    Is their a way to adjust the input for the built in microphone for my iPad? What it is recording is so quiet I can barely hear anything when it plays.
    Output works fine with videos and music, but not when I record something.
    The sound is all the way up during the recording and during playback.

    Hi!
    Generarly speaking you can't but some apps have that build-it to them. For your sound issues I recommend checking app settings.
    There have been reports that some iPads had defective or disconnected microphones.  You may need to show it to an Apple Store Genius.  If they agree it is bad, you may get a new iPad on the spot.
    If there is no Apple Store near you, search for an Apple Authorized Repair Center.  There may be one in your city.  In the US, <United States>.  Outside the US, <http://support.apple.com/kb/ht1434>.
    Vid

  • Built-in microphone not working (or extremely silent) under Windows XP

    The built-in microphone works great on my iMac under OS X 10.6.
    However, it does not seem to work under Windows XP, using BootCamp. Is there any way to fix it?

    Hi again, Hariharan
    If you right-click on the first selection in the image (the microphone) and select Properties, you should be able to see the driver in formation on the Driver tab in the new window. Can you list the driver Provider, Date, and Version? Also, how long have you had the machine, and how long was the microphone working properly before this issue began?
    Thanks in advance,
    Adam
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

  • Wha should I do if my built in microphone in my iPad won't work while using garage band

    My mic works just fine while using Siri, but when I use garage band I doesn't. Like when I try to record my voice and I play it back, it's completely mute? Does anyone know how to fix it?
    If you can
    Thanks a million!

    Is your microphone on for Garage Band?
    Settings>Privacy>Microphone

  • How do I use the built in microphone on a macbook air?

    How do I use the built in microphone on a MacBook air?

    Go to System Preferences -> Sound  -> Input, then select Built in microphone

  • How do I use the built-in microphone on my iMac while using Windows XP?

    My iMac has a built-in microphone. My computer is set up with a partition to run either mac or windows. I would like to use the built-in microphone feature when I am using Windows XP. Is there any way that I can do this?

    Hi and welcome to Discussions,
    assuming you have installed the neccessary BootCamp Drivers from the OSX Leopard DVD the internal mic is useable with any kind of recording software.
    Windows itself has a rather rudimentary Audiorecorder program built-in.
    For a more sophisticated recording program have a look at Audacity http://audacity.sourceforge.net/
    Regards
    Stefan

  • How can i use the built-in microphone at the same time as using my earphones? (they have an external mic attached)

    I am recording stuff on garageband and i need to hear other tracks as I'm playing, but I have to play them through external earphones so that the they don't overlap onto the one I'm creating.
    The wire for my earphones has an external microphone attached to it, however, I have no desire to use this microphone as it is ridiculously sensitive and picks up even the slightest vibrations when the wires rub against my cheek or my t-shirt.
    Therefore, I need to use the built-in microphone when recording. Except that, whenever I plug in the earphones to the iMac, garageband automatically switches to the external microphone. I went in to the Garageband preferences, and saw that it was set up for recording through the built-in mic, which is strange because input is clearly coming from the external.
    So, I went into the iMac System preferences > sound > input. There are three options here: Internal microphone, Line-in, and Soundbooth 3.0.
    What I found is that whenever I plug my earphones into the iMac, the option for 'Internal microphone' changes into an option for 'external microphone'. Now, I am fairly sure that an 'external microphone' is EXACTLY the same thing as a 'Line-in', but I'm not so sure now, so please feel free to correct me if I am wrong.
    How do I stop the iMac from changing 'Internal microphone' to 'External microphone'? It is very important that I am able use the earphones and the Built-in Mic at the same time.

    Hi John,
    I think the only way is to get an iMic...
    http://www.bhphotovideo.com/bnh/controller/home?O=&sku=797644&is=REG&Q=&A=detail s

  • I want to be able to use airplay to stream audio to another iOS device, and then use that audio stream to be used when recording video instead of the built in microphone / microphone input. Is this possible?

    I want to be able to use airplay to stream audio to another iOS device, and then use that audio stream to be used when recording video instead of the built in microphone / microphone input. Is this possible?

    A third-party app probably cannot obtain a stream from another app. To the best of my knowledge, such a capability is not provided in the software development kit, apps being "sandboxed" from each other and so allowed to communicate only in very specific and limited ways.
    I'm not completely sure what you mean by "limitations on video capture". An iPhone, to the best of my knowledge, can natively record video only through it's built-in camera, and audio while doing video recording only through the built-in microphone or mic/headphone jack. There might be a video recording app that would allow audio input from an external device connected to the dock connector, but I'm not sure.
    Regards.

  • How do I get the built in microphone to work on my IMac?  Camera works fine, but I can't record voice.

    How do I get the built-in microphone to work on my IMac?  Camera works fine, but I can't record sound.

    I always assummed that the mic was part of iSight (intertwined?).  The mic is situated right next to iSight.  It would seem to me the solutions would be the same some what.
    Regarding the OP, I also suspect his/her problem is hardware.  It's rather unusual for the internal mic to not work yet the iSight does.

  • TS4079 My ipad microphone next to the front camera, is not working at all, what can I do if the warranty is not available

    My ipad microphone next to the front camera, is not working at all, what can I do if the warranty is not available

    Did you flip the switch?
    http://i1224.photobucket.com/albums/ee374/Diavonex/91e9edf6b2127310428d94cf75cb6 15a_zps380c63c4.jpg

  • Where is the built-in microphone on the iMac osx 10.7

    where is the built-in microphone on the iMac osx 10.7

    It is the tiny pinhole left of the camera lens above your screen.

  • If I want to record the screen with Quicktime I dont find the "Built-in Input: Line in" There I can only change between "None" or "Built-in-Microphone: Internal microphone"

    If I want to record the screen with Quicktime I dont find the "Built-in Input: Line in" There I can only change between "None" or "Built-in-Microphone: Internal microphone"

    Have a look at Soundflower at this link:
    http://www.macworld.com/article/1159440/soundflower_capture.html

  • Is there a fan underneath the built-in microphone?

    I use iChat alot and the person on the other end can hear a whooshing sound which they didn't hear when I had my PowerBook. I can hear a fan right near the built-in microphone in the left speaker. Would Apple have put a fan right beside the microphone? I can't believe this!

    ovenbun,
    The left fan is about in the area just to the right of the left speaker, underneath the keyboard, from maybe esc key down to caps lock over to about the s key.

  • HT4101 i'm trying to plug a microphone into my ipad.  how do i do that?  it's one of the new ipads.

    how do i connect a microphone to my ipad.  if i'm shooting a video and would like more than one microphone, how should i do that?
    thank you for your assistance

    diskutil list:
    /dev/disk0
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:      GUID_partition_scheme                        *750.2 GB   disk0
       1:                        EFI                         209.7 MB   disk0s1
       2:                  Apple_HFS Macintosh HD            749.3 GB   disk0s2
       3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
    /dev/disk1
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:                            Windows7               *2.9 GB     disk1
    diskutil cs list:
    No CoreStorage logical volume groups found
    mount:
    /dev/disk0s2 on / (hfs, local, journaled)
    devfs on /dev (devfs, local, nobrowse)
    map -hosts on /net (autofs, nosuid, automounted, nobrowse)
    map auto_home on /home (autofs, automounted, nobrowse)
    /dev/disk1 on /Volumes/Windows7 (udf, local, nodev, nosuid, read-only, noowners)
    From my very basic knowledge - it still looks as if there is only one partition (not including the windows 7 CD necessary to install the windows partition).

  • If I plug a guitar into iPhone GarageBand using an interface, can I still use the built in microphone to record vocals and guitar at the same time?

    If I plug a guitar into iPhone GarageBand using an interface, can I still use the built in microphone to record vocals and guitar at the same time?

    Hi John,
    I think the only way is to get an iMic...
    http://www.bhphotovideo.com/bnh/controller/home?O=&sku=797644&is=REG&Q=&A=detail s

  • Hello. Where can I find the built in microphone on the 10.5.8

    Hello. Where can I find the built in microphone on the 10.5.8?

    So we know more about it...
    At the Apple Icon at top left>About this Mac, report the version of OSX from that window, then click on More Info, then click on Hardware> and report this upto but not including the Serial#...
    Hardware Overview:
    Model Name: eMac
    Model Identifier: PowerMac6,4
    Processor Name: PowerPC G4 (1.2)
    Processor Speed: 1.42 GHz
    Number Of CPUs: 1
    L2 Cache (per CPU): 512 KB
    Memory: 2 GB
    Bus Speed: 167 MHz
    Boot ROM Version: 4.9.2f1

Maybe you are looking for

  • Are there any drivers for NI's Audio 4 DJ that work with 10.7.4?

    I have been trying to get my system working with my dj equipment since I bought my Mac and I have had no luck. I have installed the Beta drivers from Native Intsruments' website, but I'm starting to wonder if there's something else going on. I am run

  • User presets from history panel

    Hi there I lost my hard drive and have reinstalled LR4 and relocated files to the external hard drive. I can see the user presets I used in the history panel but not in the User presets menu, is there any way to 'find' these to use again. I have look

  • Problem Creating DataStore in DS with ECC 6.0 as datasource

    Dear experts, I was unable to create this DataStore on DataServices on this Windows 2003 SP2 machine. My source system is ECC 6.0. I get "Cannot establish database connection. .... Please make sure SAP server is running and the login information is c

  • Default text in iphoto

    My photo album is in french but I keep getting a default text box even after I changed my language setting to french. If I continue and purchase the album some text will not appear in the photo album. What am I missing?

  • CJ20N / User fields PS

    Hi, via customing (transaction OPS1) we created a new tab in the project builder (CJ20N) with some new (text) fields. This is working just fine. Another requirement is to add a F4 help to these fields. The F4 is displayed which is the standard way af