Is the C100 compatible with the PIX 240?

I know the answer should be yes, but I am having trouble with mine.
When plugged directly into the PIX, I get a "no video" warning and the HDMI menus blink showing imcompatability. But, when I run the HDMI through a simple 5v splitter, the signal locks in immediately.
I've spoken with Canon a couple of times as well as Sound Devices and I'm not getting anywhere. The C100 feeds a monitor just fine. The Pix records other HDMI inputs without a problem. But the two together just don't work. Has anyone else run into this situation? I've talked to a couple of other shooters and rental houses and all of their units are compatable and working. I do have the latest firmware on both units. I have run through the menus with both companies. Is there something I am missing? A small setting somewhere that will clear this up?
To make it worse, I have a colleague who also owns a C100 and his also does not show up on the PIX. I'm not about to purchase a Ninja as I have the PIX already it it works with everythign else I own. Just wish I could get an answer on why it won't cooperate with the C100.
All comments welcome. A forwarded solution may result in several comped beverages at NAB in April.

I've spoken with Canon tech support twice.
Frame rate is not the issue. 1) The recorder auto detects what is coming in and displays it. Record settings are then made available based upon what is being fed in. 2) The hardware converter in this is pretty good so converting has yet to be a problem.
But... I cant even get that far. The signal is not recognized, at all. The recorder just states :No Input Same as if nothing is plugged in. When the recorder is plugged in, otput options under the HDMI menu in the camera are no longer available. They blink or grey out. This result has been reproduced with a second C100.
Yesterday I tested the recorder with 4 different cameras with different resolutions and frame rates. All worked thru the HDMI input to the PIX 240 except the C100. I dont want to be pointing a finger but getting the responce over the phone of, "it not in our unit" is discouraging when its the only one I am having trouble with.
~~~~~~~~~~
I did the test with a colleague present. He is confused as well and asked if there was an OVERRIDE option that would turn off the HDMI communication? That would atleast allow the info to go from the camera out to the recorder with out getting an "imcompatable" signal back in that greys out the menus.
Any thougths on this? I have a second PIX unti being lined up to test with that. If I get the same results on that unit it will confirm it is in the camera.

Similar Messages

Is the WRE54G compatible with the WRTP54G ??

I have a WRTP54G, eg the wireless router that comes with Vonage, and then bought a WRE54G to extend the signal because compatible with WRT54G/GS etc. (I missed the little "P" in the product name...)
I did the standard installation procedure, but the WRE54G does not work.
Is there any configuration or special way to install it that could make them work pls? any recommendation welcome!
THANKS.

You have WRTP54G wireless router. The default IP address of this router is 192.168.15.1. And you have WRE54G range expander and the default IP address of this range expander is 192.168.1.240. Both the devices are in a different IP address range. Try to configure the Range Expander manually.
Press and hold the reset button for 30 seconds. Release the reset button. Unplug the power cable from your Expander, wait for 30 seconds and re-connect the power cable.
1. Connect your Expander to a computer, click on the Start button >>> Settings >>> Control Panel >>> Network Connections - Right click on the icon for Local area connection and go to properties. On the 'General' tab select 'Internet Protocol TCP/IP' and click on the Properties button. Select 'Use the following IP address'- Provide IP Address - 192.168.1.5, Subnet Mask - 255.255.255.0. Click on OK button to Save and Click on "Close" on main Properties window.
2. Now open an Internet Explorer browser page on your wired computer(desktop). In the address bar type - 192.168.1.240. Leave the User name blank & in Password use admin in lower case. It should open your Expander set-up.
3. While changing the Expander settings you have to make sure that the Wireless Settings(SSID/Network Name and WEP/WPA Key) are identical on both the devices(Router and Expander).
Change the Expander's IP Address : 192.168.15.240,Subnet Mask : 255.255.255.0, Default Gateway : 192.168.15.1.
5. After configuring the Expander you should disconnect it from the Computer and go into Local Area Connection TCP/IP Properties and set it back to Obtain IP Address Automatically. Disconnect the Expander from the computer and power cycle both the devices(Expander and Router) . Your Expander should be configured.

I installed a new printer and now Photoshop Elements tells me I can't print. The error message is "The saved printer information is not compatible with this version of Photoshop Elements, or the saved printer is no longer available. You will need to che

I installed a new printer and now Photoshop Elements tells me I can't print. The error message is "The saved printer information is not compatible with this version of Photoshop Elements, or the saved printer is no longer available. You will need to check your printer settings before printing." I have uninstalled and re-installed Photoshop Elements, checked my printer settings and still I can't print a photo.

Hi ,
Please update to PSE 13.1
13.1 has solved this problem.
Refer to this link.
Photoshop Elements Help | Printer errors with Photoshop Elements 13

Cannot install Logic from DVD version 9.0.0. because it is not compatible with the latest OS 10.8.3

As I tried to install Logic 9.0.0 the OS comes out with a message saying that the OS is not compatible with this version of Logic.
I have Logic conventional DVD Software package.
How can I get this done?
Any help, I appreciate!
Thanks!

No, the message prevents me from installing.
Now, I took the App Icon from my Laptop which has the latest Logic Update installed and throw it in my new iMac's Application Folder. It seems to work OK.
What I havent installed are the Additional Content and all the DVDs that come with Logic.

I was using OS Snow Leopard and on 8/1/13 I downloaded Mountain Lion and found out it was not compatible with my HP printer (HP photosmart C5580) so I called Apple and asked how to get Mountain Lion off and Snow Leopard back on. The Tech told me to

I was using OS Snow Leopard and on 8/1/13 I downloaded Mountain Lion. Then I found out it was not compatible with my HP Printer (HP Photosmart C5580 all-in-one) so I called Apple support and the tech told me to erase the hard drive instead of going in the time machine. Well I did that and then it took about three hours three days a week for about three weeks on the phone with an apple tech to get all my stuff back on my computer. I have had trouble with my printer (won't do the scan anymore and wasn't printing on my DVDs. Also the computer keeps freezing up when it is in the sleep mode, etc.
When I tried to list my problem on this forum it lists your OS at the bottom and mine had Mountain Lion listed as what I was using so apparently it didn't erase it. Want to know how to get Mountain Lion off and put my Snow Leopard on so things start working right.

Go to the  menu/About This Mac - what OS version shows there?
Do a backup, preferably 2 separate ones on 2 separate drives.
Revert to a Previous OS X
Revert to Snow Leopard
If you do revert, I'd use Setup Assistant to restore your data. This process takes a while, so do it when you won't need the computer for several hours, based on my experience.

Content Tab: None of the fact tables are compatible with the query request

Hi All,
**One thing I am not clear yet of all my years with OBIEE is working with the content tab in BMM.**
I have made a rpd the joins in physical layer as shown below:
https://picasaweb.google.com/114804305606242416264/OBIEEError#5663056545119428530
And the BMM layer as:
https://picasaweb.google.com/114804305606242416264/OBIEEError#5663056519553812930
Error I am getting when i run a request from the 3 columns from the selected 3 tables is:
Dim - Comment Code Details
Fact - Complaint
Dim - Service Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 14020] None of the fact tables are compatible with the query request Sr Num:[DAggr(Fact - Complaint.Sr Num by [ Dim - Service Details.Sr Cat Type Cd, Dim - Comment Code Details.Cmtcode name] )]. (HY000).
I get no error for consistency.. I read everywhere and I know i need to set the appropriate aggregation levels in the various dims and facts LTS properties to help OBIEE understanding our model, but how to do that.. how do i decide... how should I approach, what should be the aggregation level, what details.
When i click More button i see different options: Copy, Copy From, Get Levels, Check Level, what do these mean.
Aggregation Content, group by - Logical Level or Column which one should i choose and how should I decide.
Can anyone explain the Content Tab in details and from scratch with some example and why we get these errors.... I know many people who are well versed with many other things related to RPD but this. A little efforts of explaining from you guys will really be appreciated.
Thanks in advance,
Dev

Hi Deepak,
Option 1:
My tables in physical layer are joined as below:
D1--> F1 <--D2--> F2 <--D3
Same way i model it in BMM
D1--> F1 <-- D2--> F2 <--D3
Here D1 is non Conformed Dimension for F2 and D3 is non Conformed dim for F1. Later create Dimensional hierarchies, I tried setting up the content levels
I go Sources>content tab of Fact F1 I set
Dimensions----------- Logical level
D1---------------------- D1 Detail
D2---------------------- D2 Detail
D3---------------------- D3 Total
then, I go Sources>content tab of Fact F2 I set
Dimensions----------- Logical level
D1---------------------- D1 Total
D2---------------------- D2 Detail
D3---------------------- D3 Detail
Then, I also go in all the dimensions and set their content levels to Details, but it still gives me errors not sure where I am going wrong in setting the content levels.
I need to know whether the way I have modeled it in BMM is right,
Option 2:
I can combine the two facts in a single Logical Fact or the above design should also work.
(F1&F2)<--D1, D2 , D3 joined separately using complex logical joins.
what will be the content tab details?
Thanks,
Dev

Bridge CC no compatible with the new After Effects CC 2014 ?

Hi, I'm updating the Adobe suite (CC 2014) .but After Effects CC 2014 no longer works with the old Bridge CC (there is no update of Bridge). Since "browse presets" in After Effects when choosing a preset (dissolves etc) there is an error message:
"After Effects error: can not import file" Entries lum.-marq.calque.ffx "unsupportedfiletype or extension (0 :: 1). With all presets.
I tried on other computers with other adobe updated it makes such licenses except with the old version of adobe after effects (after CC effects) I tried too to change language of Bridge and After effects (beharps this is a langage compatibility problem) but the problem is the same.
So I think the new version after effects CC 2014 is not compatible with the presets adobe bridge CC ??
How can I do? I have to go through the old version of after to apply a preset Bridge? I can not even download it in cloud creativ ... there is only the new version of after effects...

You need to ask in Community: Premiere Pro | Adobe Community but do not expect Adobe to discuss future plans
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform for bug reports or feature requests
This forum is about the Cloud as a delivery process, not about using individual programs
If you start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll
Also, this is an OPEN forum, not Adobe support... please do not post personal information

The Bluetooth low energy protocol is not backward compatible with classic Bluetooth protocol. My iPhone 4s can not find my sonny in-dash player. However my iPhone 3GS does it. Very disappointed with this. Any idea how it can be fixed???

The Bluetooth low energy protocol is not backward compatible with classic Bluetooth protocol.
My iPhone 4s can not find my sonny in-dash player. However my iPhone 3GS does it. Very disappointed with this.
Any idea how it can be fixed??????

Hello,
You are correct, Blue tooth low engergy, BTLE.(only) devices are not backward compatible with Classic bluetooth and cannot connect.
However the Apple 4S and above have Bluetooth 4.0 support.. Hardware wise it has bothClassic Bluetooth, like the 3GS, as well as Bluetooth Low Energy. There is no good reason why your 4s cannot communicate to your Sony in-dash player using the Classic bluetooth that resides in the 4S.
I know that this does not answer the why it does not work, but it should work. Do you have to somehow re-pair the new phone up to the player? Not knowing the model of the Sony it is hard to investigate.
And I hate to ask but are you sure that the Bluetooth radio is on in the phone?
JT

Need lightroom 4.4 asmac is 10.6.8 and not compatible with anything higher. Does this come with the creative cloud? Would really like a disc but that doesn't seem to happen anymore. Currently have cs4 and d7100 hence need 4.4 to open raw Any idea

need lightroom 4.4 asmac is 10.6.8 and not compatible with anything higher. Does this come with the creative cloud? Would really like a disc but that doesn't seem to happen anymore. Currently have cs4 and d7100 hence need 4.4 to open raw Any ideas? Is this now customer service or does adobe have a customer service team . Site not user friendly. Thanks

Graham Giles wrote:
Have you seen this type of problem before? I think it could be a serious issue for anyone in a similar position.
No; but then, I've not had occasion to use TDM. I've been using firerwire drives for over 10 years, both FW400 and FW800, with no issues except a bit of instability using a B&W G3 machine.
TDM should be safe. Using cautious, manual copying of files from the Target machine to the Host machine should not result in unexpected loss of files or damage to the Target drive's directories. It should behave exactly the same as if it were an external (to the Host) firewire drive.
• I don't suppose there is anything I can do to 'put back' lost items from a separate Time Machine drive which has an up to date backup on it.
There is probably a way to do that - seems to me that's one of the reasons for a Time Machine volume.
On the other hand, if the Time Machine volume is rigidly linked to the now-absent OS on the original drive, there may be no way to effectively access the files in the TM archive.
I know that using a cloned drive would work well in this instance.
I have no experience with Time Machine, so perhaps someone who has will chime in with suggestions.
With the machine in TDM with the other machine, have you tried running Disk Utility to see if you can effect repairs to the drive?

What are the SQL server versions those are compatible with XI 3.0.

Hi All,
Please suggest,
what are the SQL server versions those are compatible with XI 3.0.
or with which SQL server versions XI 3.0 will interact using JDBC Adapter.

Check in the [Product Availability Matrix |https://websmp201.sap-ag.de/~form/handler?_APP=00200682500000001303&_EVENT=DISP_NEW&00200682500000002804=01200314690900000192]in market place for more information on this
Thanks
SaNv...

I recently purchased an older model computer with Microsoft Me from 2000. It doesn't have a web browser and I would like to download Firefox. Where do I find the download compatible with Windows Me and how do I download it?

I have looked in your web site product downloads and I am unable to find a web browser download that is compatible with Windows Me from 2000. What am I missing? Is there a web browser download that is even compatible? It is just a second computer for my grandsons to use and do homework on, but I am unable to get up the internet.

Firefox 2.0.0.20 is the last ever version of Firefox for Win98 / SE / ME.
Get it from here:
ftp://ftp.mozilla.org/pub/firefox/releases/2.0.0.20/win32/en-US/

Not compatible with the formal parameter "NEW_ITEMS"

Dear,
I'm creating a very simple WD4A to just display the contents of the table.
So in the COMPONENTCONTROLLERS I created the node ZPI_USERS, according to the type of the internal table ZPI_USERS we have on the PI system.
Still in the COMPONENTCONTROLLER under methods I'm trying to implement this code in the 'wddoinit' event:
METHOD wddoinit.
DATA: lt_users    TYPE zpi_users,
        node_users TYPE wd_this->element_users,
        lo_nd_users TYPE REF TO if_wd_context_node,
        lo_el_users TYPE REF TO if_wd_context_element.
* navigate from <CONTEXT> to <USERS> via lead selection
lo_nd_users = wd_context->get_child_node( name = wd_this->wdctx_users ).
SELECT * FROM zpi_users
           INTO lt_users.
    lo_nd_users->bind_table( new_items = lt_users ).
ENDMETHOD.
On trying to activate I get the following error :
Web Dynpro Comp. / Intf. ZPI_DISPLAY_MONIUSERS,Web Dynpro Component Controller COMPONENTCONTROLLER
Method WDDOINIT
"LT_USERS" is not type-compatible with formal parameter "NEW_ITEMS".
I know I'm overseeing something very simple, though I get the feeling I'm running in circles. Again: the only thing I want to do is show an internal SAP table through a Web Dynpro.
Kind regards,

Hi,
You have declared
DATA: lt_users    TYPE zpi_users,
This means that you are declaring a work area and not an internal table, whereas while binding we need to pass an internal table.
Declare your table as follow,
DATA: lt_users    TYPE TABLE OF zpi_users.
" modify your select
    SELECT *
      FROM zpi_users
      INTO TABLE lt_users.
Hope this helps!
Regards,
Radhika.

After the most recent FF update, FF 3.6.6 will not load, citing the error message: "XULRunner / Error: Platform version '1.9.2.3' is not compatible with minVersion =1.9.2.6 / maxVersion". Tried updating XULRunner with no luck. Downloaded fresh copy and

After the most recent FF update, FF 3.6.6 will not load, citing the error message: "XULRunner / Error: Platform version '1.9.2.3' is not compatible with minVersion>=1.9.2.6 / maxVersion". Tried updating XULRunner with no luck. Downloaded fresh copy and installed. Still no luck.
== This happened ==
Every time Firefox opened
== FF updated to 3.6.6 ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.4; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

Do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
You can skip the step to create a new profile, that is not necessary for this issue.
See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

How do I make sure the unlocked iPhone 5s I buy on the Apple Store will be compatible with my carrier?

Hi, I'm looking to buy an unlocked iPhone 5s on Apple Store Canada - but my phone carrier, Wind Mobile, has a different frequency. I know this carrier isn't compatible with the iPhones 4s and earlier, but it was working on some versions of the 5. If I buy one here, will it work?

Ask the carrier if they support the iPhone and if it will work.

I'm trying to install iTunes on my computer running Windows 7 Home Premium.. I'm not sure if iTunes is compatible with it because when I try to install it, it says the installation is complete but it says there was an error so I can't get it! Please help!

Hellooo Apple Community!
I'm trying to install iTunes on my computer running Windows 7 Home Premium. I'm not sure if iTunes is compatible with my computer operating system because when I try to install it, it says the installation is completed but it says there was an error so it won't let me get itunes! Can someone please tell me if iTunes can be downloaded and installed on "Windows 7 Home Premium" and if so, how?! I need iTunes asap, I have an iphone 4 running ios 6.1.3. Please get back to mee!!
Thankyou thankyou thankyou!
Natalie.

I just tried running the Lenovo Hard Drive Quick Test both in normal mode and in safe mode. Both times it indicated a failed read test on the HDD. The last two tests also failed. I forget what those tests were called.
I am really beginning to think I have a bad HDD and the problem just happens to be in the reserved partition where my factory system software resides.

Is the C100 compatible with the PIX 240?

Similar Messages

Maybe you are looking for