Is the "Call Time Current Period" is the minutes that I used from my plan?
Under the Setting, there are
- Time since last full charge > Usage : is this just minutes(time) since I fully charged?
- Call TIme > Current Period: Is this the minutes I used from my plan (450 minutes for 59.99/mo.)? And is this correctly updated after fully charged?
Thanks in advance for clarifying my questions!
blue sky wrote:
Under the Setting, there are
- Time since last full charge > Usage : is this just minutes(time) since I fully charged?
Yes
- Call TIme > Current Period: Is this the minutes I used from my plan (450 minutes for 59.99/mo.)? And is this correctly updated after fully charged?
No. The current period is just the time since it was last manually reset.
Thanks in advance for clarifying my questions!
No problem
Similar Messages
-
Call Time: Current Period = Lifetime
I can not figure out why my call times are equal...and the numbers make absolutely no sense whatsover...I bought my iPhone on iDay and have only done a full restore but once back in Sept...am I right to assume that when I did the restore, I wiped out the lifetime stats?...ok, assuming this is an accurate, then I should at least have lifetime stats that reflect since mid Sept which amounts to about 40 days...yet it shows the following for both current and lifetime call time:
*5 Days 17 hours !!!!!!!*
I have searched the discussion board for an explanation of what might be causing this but nothing jumped out at me...I saw a lot of responses to the standby and usage time but this isn't my issue...do I have a iPhone replacement issue...I've already done a restart and while that affected the standby/usage stats, the current period/lifetime stats remained unchanged...please, does anyone have an answer for this?...any help is greatly appreciated !Hmmm, so since the restore, I've been on the phone 5 days and 17 hrs...ahhh, and since I've never done a reset, that's why they are equal...that clears it up for me...wow, thanks !
I do have 1 addt'l question, if I may, when I do a reset, will that wipe out both my lifetime and current periods?...or will only the current period reset to zero while the lifetime is maintained for history purposes?
Thanks for taking the time to enlighten me...I sure do appreciate it -
Hi,
I'm a new iphone owner and have a limit of 200 mins to use making telephone calls per month. I'm just wondering if the amount of time recorded in the 'Current Usage' box on the Mobile Usage screen is the amount of talk time I've used in the month or the amount of time I have left?
Thank youAs the phone has no way of knowing what your plan allowance is, it just shows how long you've been on calls. Keep in mind that not all calls are billable. My carrier doesn't count calls to customer service. So, if you had called customer service, it would show on the phone as usage but not on your bill as part of your allowance. Check to see if your carrier has an app in the App Store for tracking minutes. It will be much more accurate.
-
I'm using same icloud and same apple ID on two iphones. Now i get calls from same number on both iphones at the same time. How to turn off that?
Apple ID's are not device specific, so when you changed it on the iPad 2 it changed it on the iPhone 4 as well, since it's the same account still. What you need to do is create a second Apple ID (so you'll have two accounts, one for iPhone 4 and a seperate one for iPad 2).
To create a new Apple ID on your iPad 2:
1) Go into Settings > Store.
2) If you are already signed in, tap your Apple ID on the screen and you will be given a few options, one of which is to sign out of your account.
3) After you sign out, now click the "Sign in" button.
4) Tap "Create New Apple ID" and follow the instructions on-screen. -
On imac 10.6.8 using current version of Aperture. How can I access the Aperture Library on my external hard drive that I use with time machine for backup? I can only access the application but not the library..
Go into Time Machine (the program not the bundle on the extrnal disk) and using Time Machine's browser go to the Folder where the library lives. You could look in the library bundle in Time Machine but that won't really tell you much,
If you want to make sure it truely has backed up your library you will need to restore it and open the restored library with Aperture.
If all this still has you confused you need to read up on Time Machine in order to get a feel for how it works, for what it is doing and for how to restore files from it. -
Does restoring the iPhone reset the call time usage?
Mine seems to have done, and now I find it hard to know how much time I have used. One other thing, will this automatically reset at the start of a new contract month when your minutes gets renewed? Thanks
Wasn't the question "does restoring the iPhone reset the call time usage?"
-
Can I make the digital time display bigger on the 4s?
Can I make the digital time display bigger on the 4s?
No but you could get an app called my digital clock that is free and very big
-
i just bought the NY Times crossword app and not happy that my stats are share and that i can see others stats. can i turn off this feature?
Delete a possible user.js file and numbered prefs-##.js files and rename (or delete) the prefs.js file to reset all prefs to the default value including prefs set via user.js and prefs that are no longer supported in the current Firefox release.
*http://kb.mozillazine.org/Preferences_not_saved
*Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder) -
When making a call, sometimes, my iPhone 5 , gets stuck on 'Calling' than I have to press END..but still nothing happens, than when I press HOME button, the call app keeps running in the background and it keeps saying CALLING... than I have to wait 2 - 3 minutes and call again.
please helpHas nothing to do with the SIM or master reset. This has been done to my phone. The SIM once and the factory reset many times over. You all just sold us a bad piece of equipment and have us by the tail with our contracts so none of us can get a new phone without paying full price or re-upping our contract. I just got off the phone last night with your high up tech people (you know, the hidden number we get once we tear into your support people enough), they went into my phone again and still didn't find anything wrong. I about got fired from my job for not getting my calls and texts. The BBB has now been contacted, and I feel your end should shore this up for all of us!
-
I have a iphone5. I went to dubai there it was working properly. On my way back in the plane i turned the manual time zone selection in the date & time setting and changed it to new delhi. when i landed back and tried to use the vodafone network whose sim is installe in te mobile NO SERVICE showed up. I tried to select the time zone & network selection from the carrier but manual selection is not accepted . I got a tiick mark at the service provider name but still no service status remains. After 2 days In the time zone automatic selection has started working and is showing new delhi but still automatic & manual network selection is not working. NO SERVICE is still shown . I m not able to make any calls. Internet through WIFI is working. Kindly help.
Hello, swatiy.82.
Thank you for visiting Apple Support Communities.
I would recommend trying the steps in the article below when experiencing this issue.
iPhone: Troubleshooting No Service
http://support.apple.com/kb/ts4429
Cheers,
Jason H. -
Hi,
I created a simple plugin and since i wanted to use Early Binding i added Xrm.cs file to my solution.After i tried registering the plugin (using the Plugin Registration Tool) the plugin does not gets registered and i get the below mentioned Exception.
Unhandled Exception: System.TimeoutException: The request channel timed out while waiting for a reply after 00:01:59.9139778. Increase the timeout value passed to the call to Request or increase the SendTimeout value on the Binding. The time allotted to this
operation may have been a portion of a longer timeout.
Server stack trace:
at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.SecurityChannelFactory`1.SecurityRequestChannel.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.Xrm.Sdk.IOrganizationService.Update(Entity entity)
at Microsoft.Xrm.Sdk.Client.OrganizationServiceProxy.UpdateCore(Entity entity)
at Microsoft.Crm.Tools.PluginRegistration.RegistrationHelper.UpdateAssembly(CrmOrganization org, String pathToAssembly, CrmPluginAssembly assembly, PluginType[] type)
at Microsoft.Crm.Tools.PluginRegistration.PluginRegistrationForm.btnRegister_Click(Object sender, EventArgs e)
Inner Exception: System.TimeoutException: The HTTP request to 'https://demoorg172.api.crm.dynamics.com/XRMServices/2011/Organization.svc' has exceeded the allotted timeout of 00:01:59.9430000. The time allotted to this operation may have been a portion of a
longer timeout.
at System.ServiceModel.Channels.HttpChannelUtilities.ProcessGetResponseWebException(WebException webException, HttpWebRequest request, HttpAbortReason abortReason)
at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)
Inner Exception: System.Net.WebException: The operation has timed out
at System.Net.HttpWebRequest.GetResponse()
at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
And to my Surprise after i remove the Xrm.cs file from my solution the Plugin got registered!
Not understanding what exactly is the issue.
Any Suggestions are highly appreciated.
Thanks,
Shradha
Hello Shardha,
I really appreciate that you have faced this issue.This is really very strange issue and basically it occurs because of big size of your early bound class and slow internet
connection.
I would strictly recommend you to reduce the file size of your early bound class and then register.By default early bound class is created for all the entities which are
present in CRM(System entities as well custom entities).Such kind of early bound classes takes lots of time to register on server and hence timeout exception comes.
There is some standard define to reduce the size of early bound class.Please follow the link to get rid from big size of early bound class.
Create a new C# class library project in Visual Studio called SvcUtilFilter.
In the project, add references to the following:
CrmSvcUtil.exe(from sdk) This exe has the interface we will implement.
Microsoft.Xrm.Sdk.dll (found in the CRM SDK).
System.Runtime.Serialization.
Add the following class to the project:
using System;
using System.Collections.Generic;
using System.Xml.Linq;
using Microsoft.Crm.Services.Utility;
using Microsoft.Xrm.Sdk.Metadata;
namespace SvcUtilFilter
/// <summary>
/// CodeWriterFilter for CrmSvcUtil that reads list of entities from an xml file to
/// determine whether or not the entity class should be generated.
/// </summary>
public class CodeWriterFilter : ICodeWriterFilterService
//list of entity names to generate classes for.
private HashSet<string> _validEntities = new HashSet<string>();
//reference to the default service.
private ICodeWriterFilterService _defaultService = null;
/// <summary>
/// constructor
/// </summary>
/// <param name="defaultService">default
implementation</param>
public CodeWriterFilter( ICodeWriterFilterService defaultService )
this._defaultService = defaultService;
LoadFilterData();
/// <summary>
/// loads the entity filter data from the filter.xml file
/// </summary>
private void LoadFilterData()
XElement xml = XElement.Load("filter.xml");
XElement entitiesElement = xml.Element("entities");
foreach (XElement entityElement in entitiesElement.Elements("entity"))
_validEntities.Add(entityElement.Value.ToLowerInvariant());
/// <summary>
/// /Use filter entity list to determine if the entity class should be generated.
/// </summary>
public bool GenerateEntity(EntityMetadata entityMetadata, IServiceProvider services)
return (_validEntities.Contains(entityMetadata.LogicalName.ToLowerInvariant()));
//All other methods just use default implementation:
public bool GenerateAttribute(AttributeMetadata attributeMetadata, IServiceProvider services)
return _defaultService.GenerateAttribute(attributeMetadata, services);
public bool GenerateOption(OptionMetadata optionMetadata, IServiceProvider services)
return _defaultService.GenerateOption(optionMetadata, services);
public bool GenerateOptionSet(OptionSetMetadataBase optionSetMetadata, IServiceProvider services)
return _defaultService.GenerateOptionSet(optionSetMetadata, services);
public bool GenerateRelationship(RelationshipMetadataBase relationshipMetadata, EntityMetadata otherEntityMetadata, IServiceProviderservices)
return _defaultService.GenerateRelationship(relationshipMetadata, otherEntityMetadata, services);
public bool GenerateServiceContext(IServiceProvider services)
return _defaultService.GenerateServiceContext(services);
This class implements the ICodeWriterFilterService interface. This interface is used by the class generation
utility to determine which entities, attrributes, etc. should actually be generated. The interface is very simple and just has seven methods that are passed metadata info and return a boolean indicating whether or not the metadata should be included
in the generated code file.
For now I just want to be able to determine which entities are generated, so in the constructor I read from an XML
file (filter.xml) that holds the list of entities to generate and put the list in a Hashset. The format of the xml is this:
<filter>
<entities>
<entity>systemuser</entity>
<entity>team</entity>
<entity>role</entity>
<entity>businessunit</entity>
</entities>
</filter>
Take a look at the methods in the class. In the GenerateEntity method, we can simply check the EntityMetadata parameter
against our list of valid entities and return true if it's an entity that we want to generate.
For all of the other methods we want to just do whatever the default implementation of the utility is. Notice
how the constructor of the class accepts a defaultService parameter. We can just save a reference to this default service and use it whenever we want to stick with the default behavior. All of the other methods in the class just call the default
service.
To use our extension when running the utility, we just have to make sure the compiled DLL and the filter.xml file
are in the same folder as CrmSvcUtil.exe, and set the /codewriterfilter command-line argument when running the utility (as described in the SDK):
crmsvcutil.exe /url:http://<server>/<org>/XrmServices/2011/Organization.svc /out:sdk.cs /namespace:<namespace> /codewriterfilter:SvcUtilFilter.CodeWriterFilter,SvcUtilFilter
/username:[email protected] /password:xxxx
That's it! You now have a generated sdk.cs file that is only a few hundred kilobytes instead of 5MB.
One final note: There is actually a lot more you can do with extensions to the code generation utility.
For example: if you return true in the GenerateOptionSet method, it will actually generated Enums for each CRM picklist (which it doesn't normally do by default).
Also, the source code for this SvcUtilFilter example can be found here.
Use at your own risk, no warranties, etc. etc.
Please mark as a answer if this post is useful to you. -
I have a MacBook OSX 10.5.8 and a Time Capsule 500GB since July 2008. My problem is (for the 4th time in 4 yrs) the backup gets stuck in "preparing" indefinitely (hours). In the past, wile still under apple care warranty, tech support had me redo backup (loosing previous backups). Now I'm out of warranty and still having this problem. Any help is greatly appreciated.
I have a MacBook OSX 10.5.8 and a Time Capsule 500GB since July 2008. My problem is (for the 4th time in 4 yrs) the backup gets stuck in "preparing" indefinitely (hours). In the past, wile still under apple care warranty, tech support had me redo backup (loosing previous backups). Now I'm out of warranty and still having this problem. Any help is greatly appreciated.
-
If I have two appointments at the same time, they overlap in the iOS 7 calendar rather than appearing side-by-side in the daily view, so that I can' read both of them due to the same background color. Is there a way to change this via a settings change?
I fyou have "all day" event that are taking up the entire day, check the event. All day event only appear at the top of the time line (and just below the week view). I suspect they are not actually set up as all day, but have specific time frames assigned.
In teh screen shot below, "Sample" is an all day event; NFL: CAR@SF is not. -
Custom Field in the Administrative Time/personal task of the timesheet
Dear All,
I want to add the custom field in the administrative time/personal task of the timesheet. How can i do that??
Snapshot is attached for furthur reference.
REGARDS DANISH DANIEYou can not create custom field for Personal task or administrative task (OOB).
Project server allows us to create Project, Task, Resource, level task.
You can only Specify Line of classification and New Administrative Time category.
Choose that while creating Personal task or administrative task.
But if you really want to customize the from then please go thorugh thread which is talking about the same
http://social.msdn.microsoft.com/Forums/office/en-US/a5b1eadd-c06e-43b0-8d5e-8e6f714cc689/customizing-add-new-task-form-for-adding-a-personal-task
kirtesh -
Hi, since this morning i receive this message on my Mac Air (10.8.5) when i open iCal (which is synced through iCloud): "The server responded with an error. The server is currently unreachable or the connection was blocked". You know what it can be?
Thanks for your help!Are you behind a firewall at work or elsewhere? Does you calendar sync with some other system like google (could be the google server is not responding)? All we know from the message is that your mac cannot reach the server. Maybe try later. Are you using wifi or have an ethernet connection to the router?
Maybe you are looking for
-
11gr2 RAC install on RHEL fails with "failed to create or upgrade olr"
New 11gr2 install on empty Red Hat Enterprise Linux 5.4 machine fails with "failed to create or upgrade olr" Error during config steps. First script ran OK (orainstRoot.sh) on both nodes. Second script failed on DB01, and I haven't run on DB02, as it
-
Some pages no longer load using WIFI...
Hello, I just started noticing this issue with my iPhone last week. My home wifi connection shows full strength but for some reason, some web pages that I frequently visit will no longer fully load. Safari shows about less than 1/4 load and will then
-
Suddenly for no reason the backspace, spacebar and caps lock are no longer working on my wireless keyboard. I've seen loads of posts with the same problem but wondered if its a software issue of if the keyboard has just died? I've tried it with othe
-
Guru What is Procedure for short close the Purrchase order . SB
-
Turn off cloud music in genius
After upgrading to iTunes 11, Genius Mixes began using music in the cloud, instead of just the music on my laptop. The reason I don't have music on my laptop is because I don't want to listen to it, but I'm not willing to delete it form the cloud (ju