Is the Clip Distortion plugin included in the Logic Express 9?

Hi
I'm thinking of buying Logic Express. Is the Clip Distortion plugin included to the Express edition of Logic 9?
I need that to create some cool hardstyle/hardcore kicks.
Regards,
Jostein

jostein.topland wrote:
Is the Clip Distortion plugin included to the Express edition of Logic 9?
Hi
Yes
CCT

Similar Messages

  • Hu is the name of plugin to make the film effect

    hu is the name of plugin to make the film effect.
    can halp me,thanks!

    What film effect? Grain? Grading? Film damage? There's a whole lot of them. There are plugins contained in suites such as The Foundry Tinderbox, Digieffects Delirium, Genarts Sapphire and surely even Boris and you can of course by more complex dedicated tools such as Cinelook and Magic Bullet Looks. Some grain management tools and color correction are included in AE. you can build a damaged film look manually as well. Check my old project:
    http://creation.mylenium.de/motiondesign/ae_downloads/ae_down_looks.html
    Mylenium

  • I made a movie in iMovie then deleted the clips in it. I have reimported the clips in an event with the same name as previously and some clips in the movie are still saying source slip missing even though they are there. What can I do?

    I made a movie in iMovie then deleted the clips in it. I have reimported the clips in an event with the same name as previously and some clips in the movie are still saying source slip missing even though they are there. Some clips are fine in the movie, but most are just black and when I hover over them, it says source clip missing. How to I fix this? Thank You

    I did that too, then I did a migration assistant to a new Mac and ALL of my movies have Source Clip Missing now, even though the original clips are still in the iPhoto Videos.  I can stand to re edit one or two projects, but not ALL.

  • After you have installed Flash, you should go through the lessons that are included in the program

    Where to Start?
    After you have installed Flash, you should go through the lessons that are included in the program. Start Adobe Flash, click Help in the menu and choose Lessons. These lessons will teach you the basics of Flash.
    This is from W3 Schools on the Flash site.
    I hve no idea how to do this!

    Ask in the Flash forum.

  • Is there any way to have the clip name show up in the video

    is there a way to have the clip name (kind of like a title) automatically?  I do highlight videos and for the early versions I upload it with clip numbers to make it easier to identify the clips to move them around.  My clip names are the same as those numbers...if I could just show the clip name when I upload the video it would save me a TON of time.  Anyone know of a way to do that? Thank you!

    safari remembers it's last window position when you close it. so next time you start it will open in the same position it was when you quit it last. that's the only control available. there is no other way to fix the safari starting position.

  • My Camcorder shoots 24fps and I set my iMovie project at 24fps.  But when I add the clip, it's saying that the clip is at 30fps?  Am I doing something wrong?

    But when I add the clip, it's saying that the clip is at 30fps?  Am I doing something wrong?

    Let me tell you this: don't worry about it.
    No one is able to tell very easily if the video is in 24 or 30 fps. You can only see the difference between, like, 14 and 24 fps. Just dismiss it and move on. It's all fine.
    (the only time that I personally need to make sure my camera is shooting at it's highest fps, is when I will be putting the vidoe into slow motion.)

  • On imovie 11 the green screen isn't working i drag my clip on top and nothing happens the clip just get pushed to the side i don't get a pop up with options

    i drag my clip on top and nothing happens the clip just get pushed to the side i don't get a pop up with options
    please help

    Hi
    YOU need to - in iMovie - Turn on Advanced Tools !
    top row menu - with an Apple top left ---> iMovie ---> down to preferences ---> Here select to turn on Advanced tools .
    Now it will work when You drop a clip onto another IN a MOVIE PROJECT ! (can not be done in Event's)
    Next problem I had - was to get right clip onto the other - what was the Background and What was the Green screen - BUT just test - You only got two ways to try out.
    Yours Bengt W

  • How do I write a vi that will save graph data and text data (related to the graph) so the next time I want to view the graph data the text data is included in the read vi?

    I am new at writing vi's and hope you may be able to help. I would like to create a vi that will graph measurements taken from a daq device. I would like to include text data that a user can choose from (example: machine number, test circuit, load cell type) that will stay with the graph so when the graph is viewed at a later time the text data (explaining parts of the graph) will display with the graph data. I have included a vi I am using to capture and display a force value. Any help would be greatly appreicated.
    Attachments:
    force.vi ‏500 KB

    What you want is a DATALOG file:
    When you save a file, use the BUNDLE function to bundle your machine number, test circuit, whatever (include a few spare fields), plus your graph data. Get the graph data from the source, or use a local variable of the graph itself.
    Wire the bundle output to the DATALOG TYPE of a NEW FILE function. (I presume you'll use a FILE DIALOG set to SAVE FILE to choose a file path).
    Write the same bundle output to the DATA input of a WRITE FILE function.
    Use a CLOSE FILE function to (ahem) close the file.
    When you want to read a file, use a FILE DIALOG set to EXISTING FILE (or some other means) to specify what file to read. Wire the same cluster type to the DATALOG TYPE of the FILE DIALOG, so that it will only
    offer files of the correct type.
    When you have a file path chosen, wire the bundle to the DATALOG TYPE input of a FILE OPEN operation.
    Use a FILE READ to read a single cluster - the output of FILE READ will be a cluster of the right type.
    Use a CLOSE FILE function to....
    Out of the FILE READ function, you can UNBUNDLE BY NAME the data and send to the graph and the other fields, or, if you're clever, you can use a cluster on the screen, and not unbundle it. That's harder though, since you probably want the text fields to be controls (inputs) and the graph to be an indicator (output).
    Hope that helps.
    Steve Bird
    Culverson Software - Elegant software that is a pleasure to use.
    Culverson.com
    Blog for (mostly LabVIEW) programmers: Tips And Tricks

  • How to import logo to the clip and display it during the whole clip

    Hello All,
    I am using Adobe Premiere Pro CS4.
    I am doing a project now from various DVDs I've already made from a while ago.
    Now I will use these them in a commercial things so I want to add a logo to the clips to keep my rights ...etc.
    Here is the situation:-
    1) Importing the clip file into Adobe Premiere Pro CS4.
    2) Importing the logo image file I want to use.
    3) Right click the clip file and choose insert.
    Now I want to know how to import the image file to the clip so it is being there during the whole clip?
    I've tried several times to import it but found it displayed seperatey after or before the clip or in the middle while I want to be displayed during the whole movie.
    Also it is big when I displayed while I want to resize it to be in the top right of the clip.
    Thanks a lot
    Sorry for poor English.

    took longer than I thought...and this is only basic examples...can be finessed better....
    with more thought and time ...but this gives you the basic ideas..read bout track mattes and transparency..etc...
    samples
    white background ...with track matte
    becomes transparent..letters, black opaque, gray transluscent
    transparent background
    letters black and white are shown as is with no track matte
    transparent background with track matte...
    now white letters act as mask and allow image through only white letters

  • Android res/layout Folder not included in the APK file (but included in the ANE)

    I'm having a problem with resources on an Adobe ANE Android extension:  android.content.res.Resources@NotFoundException:  id.viewView
    I have a xml layout file, which is included in the ANE file (checking by unzipping the ANE file and looking into META-INF/ANE/Android-ARM)
    In the APK file (generated with Flash Builder 4.6), the layout folder (inside res) at the top level is missing, but its included deep in the assets folder:
        - META-INF   
        - res
            drawable
            drawable-hdpi
            drawable-ldpi
            drawable-mdpi
            raw
        - assets
            META-INF
                AIR
                    extensions
                        org.dornad.ane.MyTestExtension
                            META-INF
                                ANE
                                    Android-ARM
                                            drawable-hdpi
                                            drawable-mdpi
                                            drawable-xhdpi
                                            layout
                                            values
    Any ideas?

    Can you manually select it for inclusion by modifying Packaging Settings - Package Contents in "Export Release Build" settings?

  • Where can i find the files that were included in the labview basic 1 and basic 2 course manuals

    I have misplaced the floppies that were included in my course material. The course software version is 4.0.

    I have these files but because they are copyrighted material, I suggest you contact your local rep and he will probably be happy to get you them.
    Not NI,
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • Finding out the OH that are included in the process chain

    Hi,
    Please let me know how to find out the list of OH which are included in the process chain and which are not included.
    Is there any way where i can find out these OH are included in the Process chain.
    Regards,
    Prem

    Hi,
    http://help.sap.com/saphelp_NW70EHP1core/helpdata/en/43/7a69d9f3897103e10000000a1553f7/frameset.htm
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/01d3a090-0201-0010-9783-bc33ab690e70?QuickLink=index&overridelayout=true

  • Inserted a png PIP into my clip, can see it fine, can see it playing with the clip as expected when moving the play head manually, but cannot get it to play with the clip for preview, pleas help!

    I am sorry if my inquiry here seem dumb but I am a new iMovie user and cannot figure this out.  I inserted a png image into my video clip in the project as PIP, I can see it and move it and can also see it playing with the main clip if I move the play head manually, I can also see the PIP part only playing along with the undelying main clip if I use the Play button in the preview window when the PIP section is selected, however, for the life of me I cannot get it to play with the main clip all together for previewing the entire video via the video play button.  What happens is that the video plays normally and when the PIP section comes in, the video clip stop all motion during the duration of the PIP section and the PIP image itself is simply NOT showing.  Am I missing something really stupid here?  It seems as it the Picture On Picture is a separate clip that plays with the underlying main video clip if selected and played by itself but it is not part of the video clip and will not play with it.  What am I missing here, can anyone please help?
    Shony

    The easiest way to get up and running is to convert your MP3s to MP4s (obviously there won't be a video track). The following link links to a file that was an MP3 that I converted to an MP4 using QT Player Pro. When you go to export the files, make sure you click on "Options" and then check the box for "Enable Streaming" in the Streaming tab. It should stream flawlessly using QT Player. rtsp://rhsstreamit.rih.org/testmp4/Scorpion.mp4
    Make sure you place the media to be streamed in the proper folder. You should only get a "404" message if the physical file doesn't exist.
    Good luck!

  • When downloading a file, only the first word of the attached file is included in the 'file name' field, not the entire file name, as it used to.

    Regardless of filetype, only the first word of the file is filled into the "Enter name of file to save to..." dialog box. I'm set up to 'save file' in the FF Options > Applications tab for the basic MS and Adobe files. To successfully use/find the downloaded file, I type in the remainder of the file name. Have I overlooked an additional setting? Running FF 18.0 on a Win7 PC.

    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    A possible cause is that the server sends a wrong response header.
    The server may not comply to RFC 5987 and sends a wrong Content-Disposition:attachment; filename header.
    * https://developer.mozilla.org/en/Firefox_8_for_developers#Network

  • A question about the standard Nvidia card included with the MacPro

    I am using the Nvivia GeForce 7300 GT video card that came with my MacPro. When in Boot Camp running Window Vista, the Nvidia Control Panel says that the cards output through the digital connection is 1080p. Does this mean that if I play a DVD on the MacPro that it is upconverted to 1080p? Or, does it pass the video through at 480p?

    That is wrong. For one, I have the comupter pluged into a input port in the TV, not an output port. Output ports are for sending the TV signal to another device. Not to accept an input from another device. I am using a DVI>HDMI cable. When my set gets a 480i, 480p, 720p, 1080i or 1080p signal through HDMI it displays it as such on the info screen. Yes my set upgrades all signals to 1080p. I checked with the manufacture. They also told me that if the info screen says that a 1080p signal is being input to it, that is what it will display and if a 480p signal is being input that is what it will display. That is also how it works with my satellite receiver and my TV antenna. I also hooked up an old Toshiba Satellite Laptop to the set and the info screen displayed 480p. The Nvidia card in Apple Mac Pros and Macbook Pros does upconvert.

Maybe you are looking for