Is the concept of Replication redundant?

Dear Experts
In today's s world do you think that replication would be required? given the fact that there is high speed connectivity 24/7 - why cant one just keep the database in the same place rather than replicate? I might be wrong but ....still have a doubt in my mind?
Thanks
Best Regards
Manish

I believe multi-master (bi-directional) replication lost it's relevance. It brings more problems than it would potentially solve (recovery in the replicated geographically distributed environment, how do we do that [not only technically but from organizational/operations point of view])?
Uni-directional replication for reporting purposes - definitely yes (being it Data Guard Logical Standby, Oracle Streams when more comlex transformation rules are required).
DR - Data Guard Physical Standby (does not fit the "replication" category directly, but architects love to mix these categories) - yes, if your customer is willing to pay for that.
Regards,
Pavel

Similar Messages

Get-mailboxdatabasecopystatus -identity DBNAME | fl gives errors "The Microsoft Exchange Replication service encountered an error while attempting to start a replication instance for". DB is mounted and the DB copies are in healthy status.

We are getting a SCOM alert " Database copy isn''''t keeping up with the changes on the active database copy and has failed."
When we go to the mailbox server and check we found all the Mailbox DB's are mounted properly and their copies are in healthy state. Further digging to this problem we found that there are no critical events to this DB in the eventviewer.
When we runt he get-mailboxdatabasecopystatus -identity DBNAME | Fl then in the ErrorMessage section we get error "The Microsoft Exchange Replication service encountered an error while attempting to start a replication instance for . If the copy doesn't
recover automatically, administrator intervention may be necessary. Error: The directory is not empty."
ErrorEventID : 4126
In the event viewer we get a Information event 4114 saying the DB redundancy health check passed and in the details section we get the same error message mentioned above.
Also we observed that the "MSExchange Replication" counter "Failed" is set to 1 for this perticular DB but is is set to 0 for the other DB's. Tried restarting the MSEXChange replication service but still the "Failed" counter
is 1 and the SCOM alert is still active.
The version is Exchange 2010 SP3 UR5
Any clues???

Hi,
From your description, this issue only affect one mailbox datatabase.
Please use the Update-MailboxDatabaseCopy command to check result.
If it doesn't work, please dismount your active database copy and check if this is Clean Shutdown, if it's dirty shutdown, please bring to clean shutdown and mount this database copy. Then run the Update-MailboxDatabaseCopy command again to check result.
Best regards,
Belinda Ma
TechNet Community Support

DAG - Backup failing on 1 DB only with error - The Microsoft Exchange Replication service VSS Writer instance ID failed with error code 80070020 when preparing for a backup of database 'DB012'

Hi Board,
i´ve search across the board, technet and symantec sites but did not found a hint about my problem.
we drive a 2 node DAG (Location1-Ex1-mb1
Location2-exc1-mb1), on SP2 RU4 patchlevel with 40 Databases.
Since some time the backup of one - and only one DB - is failing with these events, logged on the Mailboxserver on which the passive DB is hosted.
Log Name:      Application
Source:        MSExchangeRepl
Date:          28.09.2012 00:37:17
Event ID:      2112
Task Category: Exchange VSS Writer
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      Location1-Exc1-MB1
Description: The Microsoft Exchange Replication service VSS Writer instance 1ab7d204-609a-4aea-b0a7-70afb0db38de failed with error code 80070020 when preparing for a backup of database 'DB012'.
Followed by
Log Name:      Application
Source:        MSExchangeRepl
Date:
01.10.2012 03:33:06
Event ID:      2024
Task Category: Exchange VSS Writer
Level:         Error
Keywords:      Classic
User:
N/A
Computer:      Location1-Exc1-MB1
Description:
The Microsoft Exchange Replication service VSS Writer (Instance 42916d80-36c1-4f73-86d0-596d30226349) failed with error 80070020 when preparing for a backup.
The backup Application - Symantec Backup Exec 2010 R3 – states, this error
Snapshot provider error (0xE000FED1): A failure occurred querying the Writer status.
Check the Windows Event Viewer for details.
Writer Name: Exchange Server, Writer ID: {76FE1AC4-15F7-4BCD-987E-8E1ACB462FB7}, Last error: The VSS Writer failed, but the operation can be retried (0x800423f3), State: Stable (1).
Symatec suggests within http://www.symantec.com/business/support/index?page=content&id=TECH184095
to restart the MS Exchange Replication Service – BUT the mentioned eventID
8229 isn´t present on any of the both Mailboxservers.
The affected Database is active on Location2-Exc1-Mb1 Server and in an overall healthy state. I found during my research, that below Location2-Exc1-Mb1 Server, there are not removed shadow copies present!
This confuses me, since all Backups are normally taken from the passive copy of a Database.
So my questions to the board are:
* Does anyone is facing similar issues?
* Can someone explain why snapshots are present on the Mailboxserver hosting the Active Database, whilst the errors are logged on the passive one?
-          * Does someone know the conditions, why shadows copies remain and
aren´t removed in a proper manner?
What can cause the circumstance, that only 1 DB is facing such issues?
Any suggestion is welcome!
BR
Markus

Hi Lenora,
I´ve encreases VSS / Exchange Backup Log levels to expert, before starting
those things i´ve all tried now:
- Backup from passive DB (forced within Symantec Backup Exec)
- Backup from active DB (forced within Symantec Backup Exec)
- Backup from passive DB without GRT enabled (forced within Symantec Backup Exec)
- Backup from active DB without GRT enabled(forced within Symantec Backup Exec)
All those attempts failed.
But brought some more details - the backup against the active DB states, that there is still a backup in progress and therefore this backup is cancelled by VSS.
The Solution was, that i´ve needed to restart the Exchange Replication Service on the Mailbox Server hosting the passive DB.
Backups are working again on all DBs!
THX for your replys.
Best regards
Markus

What is the concept of multiple projects

Hi All,
We have multiple development projects and support as well. Now my problem is say in Project1 we are working on OBJECT1, simultaneously the support team is also working on the same object (which is unknown to us). Now while transporting OBJECT1 as part of Project1 it has a dependent objects of support team, thus resulting in transportation errors and object conflicts. From SAP help I read about the concept of using multiple project assignment in transportation. Can anyone clearly explain what is multiple project concept in terms of transportation.
One most important thing I would like to know is how, whilst transportation how SAP is identifying the missing object. For example I am trying to transport a request number, but while transporting it has given an error something like object 'XXXX' is missing. Now my question is how SAP is identifying that object 'XXXX' is missing?
I would really appreciate any useful information.
Thanks,
Venkat
Edited by: putcha venkatesh on Feb 4, 2009 12:14 PM

Multiple projects in terms of transportation should make it possible to have a better overview of your transports. This way, a transport request can be assigned to a certain project, making it easier for logging purposes.
During import of the transport request, a check is done on the database (for example if a data element is available) to find out if a certain object is available or not. If not, an error is generated.
So it would be wise, before releasing the transport, to check if all objects you are using are part of another transport as well and if these transports have already been imported before your transport. Check all possible dependencies. It would be better though, to check this before making use of objects which you haven't created yourself in your development objects.

What is the concept of view in material master?

Hello sap gurus
Some quetions regarding Material Master
what is the concept of views in material master ?
what is determined by specifying industry sector in material master ?
To sell material which views are material are maintened in Material master?
Regards
Amit

Hi,
Material master for finished ggods is related with SD, MM & PP departments. If you carefully go through the various screens in MM record you will realize the importance of the respective fields and the department to which they belong.
1.Suppose Base unit of measure in Basic data 1 screen. The production people will keep the stock of the item using this UOM.
2. In Sales:Sales Org.1 screen we have sales unit in which we will sell the material.
3. Then we have the plant data in which we enter the delivering plant. Also the taxes are determined from the plant so we have the settings for taxes also - whether this material is fully taxable/50% tax/Tax exempted.
4. Then we have purchasing screen in which the data like the purchasing group, variable units,etc are entered. This will effect the purchasing cycle when we are procuring a material from outside. This is related to MM.
5. The we have MRP, this is related to PP as to how to manufacture the product, the MRP type, the strategy group - whether it is MTO/MTS like that.
5. Sales:Sales Org.2 screen - Here we mainatin the account assignment group which is very important as far as the generation of the accounting document is concerned. This triggers the system where to post the value in which G/L account. Accounting document is generated when we create the invoice in VF01 & save it.
6. Work scheduling - Related with the sceduling of the production as to whether underdelivery or overdelivery is allowed, the storage location
7. Quality - Here you can select for a particular finished item where where it has to be checked for quality during its journey from the raw material stage to the finished goods store as a finished item.
8. Accounting - Related to accounting, product costing, total value of the stock in hand, etc. Also related with FI & PP
So all the screens have data which effects one or more modules for the proper functioning of the system to give the optimum results.
Industry Sector:
Key that specifies the branch of industry to which the material is assigned.
Use
When you create a material master record, the industry sector you specify determines
1. which screens appear and in what order
2. which industry-specific fields appear on the individual screens
Screens for Sales:
Sales:Sales Org.1, Sales:Sales Org.2. But other screens also have data which is related to sales. You cannot just maintain the sales views and save the master. It has to be properly linked with the other modules also for the proper functioning of the system. That is why the system is called as "Enterprise Resource Planning" You have to paln the resources of your company and these resources are related with all the modules.
Reward points if solution helps.
Regards,
Allabaqsh G. Patil

Is the concept of Transactional DSO and Cube in BI 7?

Hi,
Is the concept of Transactional DSO and Cube in BI 7?
I see 3 type of Cubes[Standard or VirtualProvider (Based on DTP, BAPI or Function Module)]
but canu2019t see transaction Cube.
also
I see 3 type of DSO(Standard, Write-optimized, Direct update )
but canu2019t see transaction DSO
See this link on DSO, with examples etc:
http://help.sap.com/saphelp_nw04s/helpdata/en/F9/45503C242B4A67E10000000A114084/content.htm
I am looking for such summary also for Cubes have you see a similar one?
Thanks

New terminology in BI 7.x
Transactional ODS = DSO for direct update
Transactional Cube = Realtime Cube
Jen

EHP Upgrade - Trying to understand the concept

Dear experts, this is an effort to understand the concept. I have been doing Basis work for the past 10 years approximately. All along, I have been doing the typical LCP and SP upgrades way back from legacy systems until now (ECC 5.0 / BW 3.5). We have recently upgraded our BW 3.5 to BI 7.01 and also created a dual stack (we never had Java stack before for BW). This is my situation. Below are my questions. Any guidance would be highly appreciated.
1. Do we still have the SP Stack upgrades within Ehp 1? Or, has it been revamped completely and there is no more SP upgrades and we only need to do EhP upgrades? In this case, if I have to upgrade from Netweaver 7.01, is my only option upgrading to 7.02?
2. Is there a place where I can start to catchup with the whole EhP concept? I would like to know the maintenance life cycle and the impact on our environment.
3. Are there any specific upgrade guides that will guide me in transitioning from the typical SP upgrade methodology to EhP upgrade methodology. Also, I would like to know how did you transition (learning curve) from someone who had been with typical SP upgrade for a long time and how did you adopt yourself to the new path (like what guides did you use, what links did you follow, etc)
NOTE: I have heard the EhP upgrades are similar to release upgrades and I have done handful of release upgrades.
Thank you so much in advance.

>1. Do we still have the SP Stack upgrades within Ehp 1? Or, has it been revamped completely and there is no more SP upgrades and we only need to do EhP upgrades? In this case, if I have to upgrade from Netweaver 7.01, is my only option upgrading to 7.02?
Yes we do have both option available. Either we can go for SP upgrade or we can go with EHP upgrade.
>2. Is there a place where I can start to catchup with the whole EhP concept? I would like to know the maintenance life cycle and the impact on our environment.
Yes. http://Service.sap.com/erp-ehp is the place where you can get all the infromation and document.
>3. Are there any specific upgrade guides that will guide me in transitioning from the typical SP upgrade methodology to EhP upgrade methodology. Also, I would like to know how did you transition (learning curve) from someone who had been with typical SP upgrade for a long time and how did you adopt yourself to the new path (like what guides did you use, what links did you follow, etc)
Everything is available on Service marketplace.
Regards,
Subhash

Exchange Server 2013 SP1 CU5 - The Microsoft Exchange Replication service VSS Writer encountered an exception

We have 2 server DAG with a witness all servers are Server 2012 R2. Both members of the DAG are Exchange 2013 SP1 CU5.
We haven't seen this until recently, but during a VSS enabled storage snapshot the following errors occur. All of which are related to MSExchangeRepl and the Exchange VSS Writer.
Event IDs 2140, 2026, 2028, 2030.
The errors start with the 2140 seen here:
The Microsoft Exchange Replication service VSS Writer encountered an exception in function Microsoft::Exchange::Cluster::ReplicaVssWriter::CReplicaVssWriterInterop::PrepareSnapshot. HResult -2147467259. Exception Microsoft.Mapi.MapiExceptionDatabaseError: MapiExceptionDatabaseError:
Unable execute Prepare on snapshot. (hr=0x80004005, ec=1108)
Diagnostic context:
Lid: 1494 ---- Remote Context Beg ----
Lid: 56264 StoreEc: 0x1388
Lid: 46280 StoreEc: 0x454
Lid: 1750 ---- Remote Context End ----
Lid: 59216
Lid: 34640 StoreEc: 0x454
Lid: 52264
Lid: 46120 StoreEc: 0x454
at Microsoft.Mapi.MapiExceptionHelper.InternalThrowIfErrorOrWarning(String message, Int32 hresult, Boolean allowWarnings, Int32 ec, DiagnosticContext diagCtx, Exception innerException)
at Microsoft.Mapi.MapiExceptionHelper.ThrowIfError(String message, Int32 hresult, IExInterface iUnknown, Exception innerException)
at Microsoft.Mapi.ExRpcAdmin.ProcessSnapshotOperation(Guid mdbGuid, SnapshotOperationCode operationCode, UInt32 flags)
at Microsoft.Exchange.Cluster.Replay.StoreRpcController.<>c__DisplayClass1c.<SnapshotPrepare>b__1b()
at Microsoft.Exchange.Cluster.Replay.SafeRefCountedTimeoutWrapper.<>c__DisplayClass2.<ProtectedCallWithTimeout>b__0()
at Microsoft.Exchange.Data.HA.InvokeWithTimeout.Invoke(Action invokableAction, Action foregroundAction, TimeSpan invokeTimeout, Boolean sendWatsonReportNoThrow, Object cancelEvent)
at Microsoft.Exchange.Cluster.Replay.SafeRefCountedTimeoutWrapper.ProtectedCallWithTimeout(String operationName, TimeSpan timeout, Action operation)
at Microsoft.Exchange.Cluster.ReplicaVssWriter.CReplicaVssWriterInterop.SnapshotPrepare(Guid dbGuid, UInt32 flags)
at Microsoft.Exchange.Cluster.ReplicaVssWriter.CReplicaVssWriterInterop.PrepareSnapshot().

Hi Julez K,
According to your description, you could try upgrading to CU6.
In addition, you could review the Exchange Application (App) Event log and the Exchange System (Sys) Event log for errors , and some related resolutions for your reference.
http://www.symantec.com/business/support/index?page=content&id=TECH209938
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety,
or suitability of any software or information found there. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
Hope it can be helpful.
Best regards,
Eric

Unable to understand the concept of Primary Key in EJB

hi,
please help me in understanding the concept of Primary Key.
For each and every entity bean represents a data base row. i think it is correct. if multiple users are accessing the same data base row, there will be different primary key for each and every client. is it correct or not. can we say this as "concurrency"?. if all the clients are manipulating the bean, who manages it either application server or data base server?. why does we must implement both hashCode() and equals() methods?. Provide me the links where i can find the answers.

if multiple users are
accessing the same data base row, there will be
different primary key for each and every client.This is incorrect: the PrimaryKey is the unique identifier for each database row. It has nothing to do with users. In order for CMP to work, the container must be able to operate with a single row in the database and be able to distinquish between them.
If your CMP->database table already has one column that's unique, then you declare that CMP field to be <primary-key-field>. If you have more than one column that makes a row unique, you must make your own primary key object. The way the container can tell the difference between these primary key objects is to compare them, therefore the hashCode and equals methods.
Provide me the links where i can find the
answers.This is all discusssed in the J2EE Tutorial.

What are the concepts of iPhone 5?

I wanted to know the concepts of iPhone 5.

Hi, where is your techincal support query? We, like you, are non-Apple staff, just users of Apple products. To discuss concepts behind Apple products, please contact Apple directly or visit their product pages.

Hi, can any body explain the concept of UTILIZATION IN EXCISE

hi,
sap gurus,
can any body explain the concept of Utilization in excise, if possible send me the documentation
part of that please.
please explain me on this also
in direct factory sales from direct factory to customer how utilisation works
in depot sales: first material has to reach from factory to depot and then it has to be passed to
customer then in this situation how utilisation works in SAP.
regards,
balaji.t

Dear balaji
Export under Rebate is the procedure in which the exporters first pay the central excise duty before clearing the goods from the factory and subsequently get it back by applying for rebate after the goods are exported. They have to apply to the Division or to the Maritime Commissioner (designated exclusively to look after all Export related issues) as the case may be, along with the required documents (usually the Export Promotion copy of the Shipping Bill and Bill of Lading) to prove that their goods had actually been exported.
Rebate can be claimed for both the inputs (purchased from indigenous markets and used in the manufacture of exported goods) as well as for the final products. Normally, rebate is being widely opted by non-excise assessees (for example garment exporters) who procure raw materials locally, manufacture their final products and export them. It is similar to Drawback of Customs duties in respect of Imported raw materials.
From SD side, you have to make settings in Logistics-General --> Tax on Goods Movements --> India --> Business Transactions --> Outgoing Excise Invoices --> Maintain Default Excise Groups and Series Groups.
Here for the combination of sales area, shipping point, plant, excise group and series group, you have to maintain Export type [N under the tab Export]
thanks
G. Lakshmipathi

Hi All,What is the concept of table control in bdc

Hi All,What is the concept of table control in bdc .Can u please explain in brief.How we have to handle the logic for va01 transaction .
Thanks&regards.
Bharat

Hi Kaushik Datta ,
 I already know for me51 ,but i am getting the problem for va01 while populating the item details in to the table control. The code which i have generated is :
please see the code and tell me where i should increment the counter for populating the item details
report ZBKVA01Y
 no standard page heading line-size 255.
include bdcrecx1.
parameters: dataset(132) lower case.
 DO NOT CHANGE - the generated data section - DO NOT CHANGE ***
If it is nessesary to change the data section use the rules:
1.) Each definition of a field exists of two lines
2.) The first line shows exactly the comment
 '* data element: ' followed with the data element
 which describes the field.
 If you don't have a data element use the
 comment without a data element name
3.) The second line shows the fieldname of the
 structure, the fieldname must consist of
 a fieldname and optional the character '_' and
 three numbers and the field length in brackets
4.) Each field must be type C.
DATA: BEGIN OF IT_DUMMY OCCURS 0,
 TEXT(1000),
 END OF IT_DUMMY.
Generated data section with specific formatting - DO NOT CHANGE ***
data: begin of IT_HEADER OCCURS 0,
data element: AUART
 AUART_001(004),
data element: VKORG
 VKORG_002(004),
data element: VTWEG
 VTWEG_003(002),
data element: SPART
 SPART_004(002),
data element: BSTKD
 BSTKD_005(035),
data element: BSTDK
 BSTDK_006(010),
data element: KUNAG
 KUNNR_007(010),
data element: KUNWE
 KUNNR_008(010),
data element: ABHOZ
 ABHOV_009(008),
data element: ABHOZ
 ABHOB_010(008),
data element: PRSDT
 PRSDT_011(010),
END OF IT_HEADER.
DATA: BEGIN OF IT_ITEM OCCURS 0,
data element: MATNR
 MABNR_01_012(018),
data element: KWMENG
 KWMENG_01_013(019),
 end of IT_ITEM.
*DATA: DATE(10) TYPE C.
*DATA: I_DATE TYPE SY-DATUM.
*DATA: I_YEAR(4) TYPE C,
 I_MONTH(2) TYPE C,
 I_DAY(2) TYPE C .
*DATA:
End generated data section ***
start-of-selection.
CALL FUNCTION 'UPLOAD'
EXPORTING
CODEPAGE = ' '
FILENAME = ' '
FILETYPE = ' '
ITEM = ' '
FILEMASK_MASK = ' '
FILEMASK_TEXT = ' '
FILETYPE_NO_CHANGE = ' '
FILEMASK_ALL = ' '
FILETYPE_NO_SHOW = ' '
LINE_EXIT = ' '
USER_FORM = ' '
USER_PROG = ' '
SILENT = 'S'
IMPORTING
FILESIZE =
CANCEL =
ACT_FILENAME =
ACT_FILETYPE =
TABLES
 DATA_TAB = IT_DUMMY
EXCEPTIONS
CONVERSION_ERROR = 1
INVALID_TABLE_WIDTH = 2
INVALID_TYPE = 3
NO_BATCH = 4
UNKNOWN_ERROR = 5
GUI_REFUSE_FILETRANSFER = 6
OTHERS = 7
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*perform open_dataset using dataset.
LOOP AT IT_DUMMY.
IF IT_DUMMY-TEXT+0(1) = 'H'.
IT_HEADER-AUART_001(004) = IT_DUMMY-TEXT+1(4).
data element: VKORG
IT_HEADER-VKORG_002(004) = IT_DUMMY-TEXT+5(4).
data element: VTWEG
IT_HEADER-VTWEG_003(002) = IT_DUMMY-TEXT+9(2).
data element: SPART
IT_HEADER-SPART_004(002) = IT_DUMMY-TEXT+11(2).
data element: BSTKD
IT_HEADER-BSTKD_005(035) = IT_DUMMY-TEXT+13(35).
data element: BSTDK
IT_HEADER-BSTDK_006(010) = IT_DUMMY-TEXT+48(8).
data element: KUNAG
IT_HEADER-KUNNR_007(010) = IT_DUMMY-TEXT+56(10).
data element: KUNWE
IT_HEADER-KUNNR_008(010) = IT_DUMMY-TEXT+66(10).
data element: ABHOZ
IT_HEADER-ABHOV_009(008) = IT_DUMMY-TEXT+76(6).
data element: ABHOZ
IT_HEADER-ABHOB_010(008) = IT_DUMMY-TEXT+82(6).
data element: PRSDT
IT_HEADER-PRSDT_011(010) = IT_DUMMY-TEXT+88(8).
APPEND IT_HEADER.
CLEAR IT_HEADER.
ELSEIF IT_DUMMY-TEXT+0(1) = 'I'.
data element: MATNR
IT_ITEM-MABNR_01_012(018) = IT_DUMMY-TEXT+1(18).
data element: KWMENG
IT_ITEM-KWMENG_01_013(019) = IT_DUMMY-TEXT+19(15).
APPEND IT_ITEM.
CLEAR IT_ITEM.
ENDIF.
ENDLOOP.
perform open_group.
LOOP AT IT_HEADER.
perform bdc_dynpro using 'SAPMV45A' '0101'.
perform bdc_field using 'BDC_CURSOR'
 'VBAK-SPART'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
perform bdc_field using 'VBAK-AUART'
 IT_HEADER-AUART_001.
perform bdc_field using 'VBAK-VKORG'
 IT_HEADER-VKORG_002.
perform bdc_field using 'VBAK-VTWEG'
 IT_HEADER-VTWEG_003.
perform bdc_field using 'VBAK-SPART'
 IT_HEADER-SPART_004.
perform bdc_dynpro using 'SAPMV45A' '4001'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
perform bdc_field using 'VBKD-BSTKD'
 IT_HEADER-BSTKD_005.
perform bdc_field using 'VBKD-BSTDK'
 IT_HEADER-BSTDK_006.
perform bdc_field using 'KUAGV-KUNNR'
 IT_HEADER-KUNNR_007.
perform bdc_field using 'KUWEV-KUNNR'
 IT_HEADER-KUNNR_008.
perform bdc_dynpro using 'SAPMSSY0' '0120'.
perform bdc_field using 'BDC_CURSOR'
 '04/05'.
perform bdc_field using 'BDC_OKCODE'
 '=CHOO'.
perform bdc_dynpro using 'SAPMV45A' '4001'.
perform bdc_field using 'VBAK-ABHOV'
 IT_HEADER-ABHOV_009.
perform bdc_field using 'VBAK-ABHOB'
 IT_HEADER-ABHOB_010.
perform bdc_field using 'VBKD-PRSDT'
 IT_HEADER-PRSDT_011.
perform bdc_field using 'BDC_CURSOR'
 'RV45A-KWMENG(01)'.
perform bdc_field using 'RV45A-MABNR(01)'
 IT_ITEM-MABNR_01_012.
perform bdc_field using 'RV45A-KWMENG(01)'
 IT_ITEM-KWMENG_01_013.
perform bdc_transaction using 'VA01'.
*enddo.
ENDLOOP.
perform close_group.
*perform close_dataset using dataset.
Thanks&regards.
Bharat .

What is the concept behind using table PA0002 and structure p0002.

Hi,
What is the concept behind using table PA0002 and structure p0002.
Many times, I have seen Looping at structure e.g. p0002, p0006 etc. and data is processed and also seen Looping at table PA0002, PA0006 etc. with further appropriate subtypes if any to retrieve a value and process the same.
In which context tables like PA,HRP,IT etc. are used and structures p0001,p0002 etc. are used.
Regards,
Ameet

HI,
As mentioned that that Structure Pnnnn is user as a internal tablw when a LDB is used.
Ex.
TABLES: PERNR.
INFOTYPES: 0001.
GET PERNR.
    PROVIDE * FROM P0001 BETWEEN PN-BEGDA AND PN-ENDDA.
    WRITE: / P0001-PERNR,
              P0001-STELL,
              P0001-BEGDA,
              P0001-ENDDA.
    ENDPROVIDE.
Here it is important to declare the infotypes you want to read and so the system will create internal tables ex. P0001.
Tables PA0001 are database table with following fields
MANDT
.INCLUDE PAKEY
.INCLUDE PSHD1
.INCLUDE   PS nnnn
Thanks,
Poonam.

What is the concept of Active directory in HFM

Hi Experts
What is the concept of Active directory in HFM?
regards
Dev

Hi Dave,
Not sure if this is your exact requirement... but might be helpful.
The concept of Active directory is that users can login to HFM application with the windows credentials. To make that work you should first need to configure.
Please refer the below link, page 23:
http://docs.oracle.com/cd/E17236_01/epm.1112/hss_admin_1112200.pdf
Hope this helps,
Thank you,
Charles Babu J

What is the concept of setup tables in LO extraction?

Hi,
what is the concept of set up tables in LO EXTRACTION?
GIVE ME COMPLETE DETAILS and how to run deltas? I want step by step procedure.
Thanks in advance.
ravi.

Ravi,
I think the blog series by Robert Negro about LO is the best available information.
SDN thread:
/community [original link is broken]
It would be nice if there is any help.sap documentation available.
Raj.

Is the concept of Replication redundant?

Similar Messages

Maybe you are looking for