Is the current MacBook more reliable running Windows than a MacBook Pro?

I have a newish Santa Rosa/Penryn based MacBook Pro. Unfortunately, I have to run some apps under Windows and am running XP most of the time. However, the MacBook Pro has proven to be a poor choice for this. I get a Windows Blue Screens of Death on a frequent basis (more frequent than I ever seen on any non-Apple notebook). Burning DVDs take almost 30 minutes now (it used to take 10 minutes). The wifi drops constantly. Audio glitches most of the time. It is really frustrating and has only gotten worse with time and updated drivers.
I have a MacBook for work that I run MacOS (and the OS from my employer) on and it seems to work more nicely that my MacBook Pro.
Does the MacBook run Windows XP more reliably that the MacBook Pro?

In this context, I think Kappy was suggesting that "defective" meant that your
XP had either not installed correctly or the installation had become corrupted.
I know it's a complete pain and would waste at least a day, but I'd be tempted
to reformat the Boot Camp partition and try installing again from the Win XP CD.
The BSOD issue with the MBP has been present since early on and reported by others as well. The problem is with the Apple supplied driver(s). (I have run diagnostic tools that point to the wifi driver being part of the problem, but not the entire problem. I suspect that there might also be an issue with the touchpad driver, but I haven't run any tests to verify that.) I just don't get the sense that Apple has much motivation to fix the problem(s). The nature of the BSOD problem (as reported by the BSOD) is something that could lead to the other problems that I have observed.
I have had my MBP for a few months with no sign from Apple that the issue is being addressed. The MBP is a great machine, but unless someone ports all of the apps that I need to MacOS X, I need to run Windows better than it does.
So, any more reports on how well XP runs on a MacBook?

Similar Messages

  • HT1338 Does anyone know what the model # is of the current MacBook Pro 15in, 2.3 GHz , 4GB memory, 500 MG HD? Is it MD103LL/A? My MacBook Pro (3 yrs old) was stolen and my ins co found this model at Best Buy for $1799. Want to know if they're same, specs?

    Does anyone know what the model # is of the current MacBook Pro 15in, 2.3 GHz , 4GB memory, 500 MG HD? Is it MD103LL/A? My MacBook Pro (3 yrs old) was stolen and my ins co found this model at Best Buy for $1799. Want to know if they're same, specs? Thank you!

    Yes, it is in the United States and Canada. In other countries, the LL will be something else.
    (69778)

  • Current 13 inch keyboard layout is it the same as the  current MacBook Pro

    Iv'e been looking at a refurb 13 inch Air and noticed the enter key is the same as the current MacBook pro. Is this the current layout or the old style
    Thanks

    Welcome to the Apple Support Communities
    I think you are referring to the Late 2008 Aluminum MacBook. It's an Unibody computer, and this MacBook has got a non-replaceable battery. You have to take the computer to an Apple Store or reseller to get your battery replaced.
    The steps of the link you gave are for non-Unibody MacBooks Pro, that have got a replaceable battery. In this case, you have to buy the battery from the Apple Online Store

  • Should i get the current MacBook Pro or the new design MacBook pro 2012?

    Dear all,
    GImme some opinions which to choose? Should i wait for the supposedly new design MacBook Pro? or get the current models that hae pretty good specs? I'm doing college at the moment and my current laptop is 4yrs old in need of a new one and hopefully get the 17" MBP coz the specs seem amazing. I'm doing graphics and multimedia so i would need a laptop that can handle all those stuff and be fast. So gimme some ideas what you think abt the current MBP and the soon to come new models? which is something pretty doubtful.

    Hold off the buying. The current unibody macs are the last of the generation. A geenration that's in it's 4th year.
    You might want to consider upgrading your current hard drive only to an SSD if your mac supports it. You can then move this over to your new mac. That's what I have done, and the speed difference of an SSD makes it feel like a new machine.
    I would also suggest you buy a 15" and not a 17" save your money. The 17 is loking carrying a surfboard around.
    <Edited by Host>

  • Is the current MacBook Pro right for me?

    I'm looking into purchasing a 17" MBP, 2.8GHz, 8GB RAM and 7200 RPM 500GB HDD.
    Now, I'm trying to tiptoe around this subject as speculation is frowned upon here, so please forgive me if I happen to accidentally cross any sort of speculating line.
    Anyway, I need a machine that's portable (not ultraportable), able to smoothly and easily work with large audio/video/image files (Logic Studio, Final Cut, Photoshop, etc), and occasionally do some gaming. I'm sure this particular MBP would be able to do the trick.
    HOWEVER, with all the rage regarding Sandy Bridge processors and a possible MBP refresh soon, one thing has got me curious. (Sorry for the speculating here.)
    My understanding is that the current MBP has integrated as well as a dedicated video card, and IF a Sandy Bridge MBP was released, it would be switched to integrated video. Basically, I'm wondering if these integrated graphics would be a negative thing for someone like me. I know in the past, integrated graphics have been less than stellar.
    I also understand that Sandy Bridge features great energy saving and performance upgrades, which are of course welcome. I'm not impatient, so I can wait for a refresh, but if it's going to have a negative impact on what I need it for, I'd rather get a hold of the current MBP while I still can.
    As I said, I apologize for any speculation or "bad things" in this post.

    Great posts guys! Thanks.
    I am aware of the recall, and like I said, I've got no problem waiting. I believe Intel has already announced they will start shipping again soon. An interesting note here. Since only the four SATA II connections on the board were faulty, the two SATA III connections were fine, some manufacturers may still use the "faulty" boards. I don't think I'd be bothered too much by connections that I'd never be able to use not working properly. Assuming no other problems would arise.
    Anyone have any more input on the dedicated/integrated graphics situation? Could Apple still include a dedicated graphics card along with these Intel integrated graphics?
    Thanks again!
    -Chris

  • Which generation for the current macbook pro 13?

    Which generation proccessor the macbook pro 13 normal and retina currently selling in apple store?
    Which should I go for?

    vzhen,
    you can get the non-Retina model with either a 2.5 GHz Core i5 or a 2.9 GHz Core i7 Ivy Bridge CPU. You can get the Retina model with either a 2.4 GHz Core i5 Haswell, a 2.6 GHz Core i5 Haswell, or a 2.8 GHz Core i7 CPU.
    You should go for whichever model best meets your requirements.

  • Can the current Macbook Pro 13 inch run Color?

    Under Minimum Requirements, it says it needs a bigger display. Can it still run, even if it is a little small, or will it refuse to run altogether?

    Double click on the screen icon and find out!
    I doubt it, though. The minimums are pretty hard-and-fast, mostly because the UI is absolutely inflexible. There are hacks for re-setting the minimums at an OS level, but the results are unpredictable and usually result in an unusable install. Mostly because users can't read the tiny print on the buttons.
    jPo

  • Have the current macBook Pro (13") using OSX

    I have made a mess of everything to the point where I probably should start fresh and reload everything. Is there some way I could reset to original factory settings?

    Restart your MB and hold the command R.
    That will boot in recovery mode.
    Make sure you have internet connection.
    You'll have options to install in factory default

  • Early 2013 MacBook Pro vs Current MacBook Pro

    I have an early-2013 15" Retina MacBook Pro (2.7GHz quad-core Intel Core i7, 16GB RAM, 768GB SSD). MacMall has a good deal on the current MacBook Pro (2.8GHz quad-core Intel Core i7, 16GB RAM, 1TB SSD). The new one has updated processor (Haswell vs IvyBridge), larger hard drive and AC wifi vs N. Would I notice a difference at all or is it worth waiting for next-gen MacBook Pros. I assume they will come with the new trackpad and other enhancements that the just released 13" MacBook Pro has. New MacBook Pro is $2944 and can probably get about $1000 to $1,200 for the old one.

    There will be a slight improvement in performance, but I could not state definitively that you would notice it other than in a benchmark. A faster clock and Haswell CPU is a slight improvement, but I wouldn't consider it major based on benchmarks I've seen published when Haswell's were first released. If you look for them on Google perhaps they can give you a more definitive answer to your question.
    As it is you still have considerable life left in what you have, so you need to consider whether the change in performance is worth the added net expenditure of $1,900.00.

  • Supported RAM in the new MacBook Pro

    On Black Friday last year I purchased 8gb of RAM for the current MacBook Pro. Will this RAM be supported in my new MacBook Pro that I ordered right after the refresh Thursday?

    themacintoshdaddy wrote:
    On Black Friday last year I purchased 8gb of RAM for the current MacBook Pro. Will this RAM be supported in my new MacBook Pro that I ordered right after the refresh Thursday?
    You are best off to buy the specified new Ram modules 1333MHz DDR3 SDRAM.
    Mac is finicky about RAM. Yes you could install your old RAM but I suspect out of nowhere in a week you will be wondering why all of a sudden you have a Kernel Panic. Just buy the correct RAM.
    Send along the old RAM (1067 MHz DDR3) with your old MBP when you sell it.

  • My interface -- buttons (back, forward, reload), firefox tab, groups, etc. -- does not look like the sample on your "firefox features" page. ("Groups" seems not to function at all.) I'm running the current firefox 4 download on Windows XP. Can you help?

    My interface -- buttons (back, forward, reload), firefox tab, groups, etc. -- does not look like the sample on your "firefox features" page. ("Groups" seems not to function at all.) I'm running the current firefox 4 download on Windows XP. Can you help?

    cor-el
    Thank you for your swift reply. I don't know that this has helped me, as I've reached my level of tolerance for fooling with this annoying little problem - for today anyway. It has been going on since I "up" graded to Firefox 4. My wife is running 3.6.x on her laptop with none of this foolishness. As BLASPHEMOUS as it may sound, I've gone back to IE for the time being even though I don't like it 1000th as much as I do Firefox.
    Not just to rant here, I would say that I found a way to put some buttons on the right side of the toolbar that immediately gave me permission to "back, forward, and reload", but upon closing the browser and going out for dinner with the wife, I find on return that not only are those buttons NOT still on the toolbar, but I can't find them anymore. I think they were in "add-ons" found under I believe Add-On Manager.
    I did also manage to achieve back/forward functionality running Firefox in SAFE mode, but this meant no No-Script, among other things, and I've grown too fond of that particular little script to give it up.
    I've rebooted, restored, and reinstalled, can't get this formerly completely reliable program to work like it always has. Before looking around on here, I was beginning to think it was my PC.
    THANK YOU FOR YOUR HELP, cor-el. I'm going to see if I can get on live chat on Monday.
    bossman344

  • Hi! I work with Photoshop/Premiere Elements 10 on my snow leopard (10.6.8) without problems since years. Now I want to move over to the new MacBook Pro (and lion 10.7.5) but only Photoshop runs on it, every Premiere version (I downloaded Elements 12 and f

    Hi! I work with Photoshop/Premiere Elements 10 on my snow leopard (10.6.8) without problems since years. Now I want to move over to the new MacBook Pro (and lion 10.7.5) but only Photoshop runs on it, every Premiere version (I downloaded Elements 12 and further more) stops installation and shows Installation ERROR: ASU has quit unexpectedly, Media DB Error: 18. Please help!

    run the cleaner and retry installing per, Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

  • How well does Photoshop Cs6 run on the 15" Macbook Pro with 2.6gHz?

    I'm currently 'in the market' for a new computer. My desktop is fine, but no longer can handle all the tasks I can toss at it for work (i.e. graphic design). I have been carefully biding my time, getting as much use out of it and my essentially crummy Paint Shop Photo x2, and I believe now for it to be the time to invest in a Mac and the newest edition of Photoshop (CS6). My question is this: Which one of the two Macbook Pro 15" will work best with it, and yet still survive through the next few series of upgrades? My boyfriend says the higher one, the 2.6gHz guy, will do just fine for what I need, I'm just chewing my nails off at the price. And no, I'm not interested in the retina display model. Suggesting it is just pointless.
    Basically, I'd like to know which Macbook Pro 15", the one with 2.3gHz or 2.6gHz, will suffice for the jobs I need to do, which include all areas of graphic design and artwork (hence Photoshop), along with heavy internet usage (7-9+ tabs open at any time), Word documents or the equivalent (Pages) and any extras (iTunes, Spotify). Bonus if it can gently tolerate things such as the Sims 3 and all its expansion packs.

    The nice thing about the 2.6GHz model is that it comes with a NVIDIA GeForce GT 650M with 1GB of GDDR5 memory. The 2.3GHz model only has the NVIDEO GeForuce GT 650M with 512MB of GDDR5 memory. And Photoshop will take advantage of that extra video RAM.
    That said, I have an older (late 2011) 15" MBP with a 512MB video card and Photoshop CS6 (and the entire Adobe Design & Web Premium suite) works just fine. If I were you, I would buy the base 2.3GHz model with 4GB of RAM and upgrade the RAM, and possible the hard drive with a SSD, as you need it. You can upgrade your RAM yourself to 16GB and you will notice an appreciable difference in Photoshop speed. And I would recommend the RAM upgrade straightaway. You can then look at putting in a 512GB SSD for around $400 and you'll have one of the fastest machines around.
    So go with the 2.3GHz and upgrade the RAM immediately. Good sources for RAM are Crucial, Corsair, etc. You'll get far more out of a RAM upgrade than you will the processor upgrade.
    Clinton

  • Which of these cables is better for the current Macbooks?

    I have a 2008 Macbook, with the mini displayport that can't output audio. I decided to rectify this by buying this cable, which combines video from mini displayport and audio from USB into an HDMI cable:
    http://www.kanexlive.com/products/iAdapt20.html
    now, I might be getting one of the new Macbook Pros that will be coming out in the next month or so, or one of the current models if the new ones take too long. so i'm wondering if I should replace the cable I have with one of these:
    http://www.kanexlive.com/products/mdphdmi10ft.html
    or
    http://www.kanexlive.com/products/iAdaptV2.html
    should I go ahead and get the upgrade? I figure it would be an improvement since those give better quality audio. I'm also wondering how my current cable would perform when plugged into a MDP that send audio on its own. could that cause a problem, since I would be out putting audio through 2 ports into the same cable? also, I wonder if the newer cables might have any problems due to getting power from the MDP instead of USB, I don't know whether that makes a difference or not.

    It doesn't matter which one you get since the Atom CPU has a 667MHz FSB.
    If you install 800MHz RAM, it will simply run at 667MHz.

  • Now that the new macbook pro has usb 3.0, is there a way to convert my current macbook's usb 2.0 to 3.0?

    Now that the new macbook pro has usb 3.0, is there a way to convert my current macbook's usb 2.0 to 3.0?

    No you can not.
    You can connect USB 3 components to you MB if you wish to use them but will only run at USB 2 specs.

Maybe you are looking for

  • Laserjet Pro 200 color m251nw touch screen

    The touch screen does not work except for teh keys outside of the touchscreen area.  The printer prints OK, but I need to change the IP address and cannot get the touch screen to work.  It displays fine.

  • How to set Password for Xellerate user in OIM

    I am using recon API's and creating Xellerate user, unfortunately the recon is not accepting USR_PASSWORD which is the field name defined in OIM Can somebody please let me know how to set this password for Xellerate user?? Thank you in advance for yo

  • N8 Currency / Unit Converter

    Hi all, Anybody knows N8 is having inbuilt Currency/Unit Converter like in the other phones under the application "Converter"? I installed some converter widgets but all those need net connection and not userfriendly for me if anybody know any Curren

  • Subscription purchased; calls not going through

    Hi I am not able to call any mobiles and cell from Skype...yesterday only I subscribe for 800 min to India for 1 month Subject/title edited. Solved! Go to Solution.

  • Missing Rules Setup Menu

    I'm missing any menu to setup or edit rules in Mail. Rules I setup in Tiger are still there and working but I see no way to create or edit rules. Anyone else have this issue?