Is the Decimal Notation Setting based on the country of the vendor?

I would like to ask help with regards to an error which i encountered when I Print Preview a Purchase Order Document via Transaction ME23N.
Within the Print Program, the Decimal Point setting is normal ( for example 2.90, 192.97, 1,903.00 , etc.), but when the value is passed on to the SAPscript Form the Decimal Point setting is incorrect ( for example 2,90 , 192,97 , 1.903,00). This error is only observed on a single Vendor being used in the creation of the PO.
I would like to confirm if indeed the settings for Decimal Notation is based on the settings being used in the specific country of the vendor.
I hope anyone can help me out with this one. Reward points up for grabs.

Hi
In my case in sapscript while printing total for JPY is for three decimals but after calculating it used to take two decimals & leave one decimal to left ex as below.
FOB : 100.000
Freight: 10.00
Total : 1000.00 (In figures One Hundered & Ten Only).
here in sapscript program this decimal notation was given for two hence it was going to left side we correct it to three decimal notation.
kindly check with script & you can fix it there.
Regards
Rang

Similar Messages

Changing the Decimal Notation of Invoice Smartform

Hi Gurus,
Is there a way to change the decimal notation of Standard Invoice Smatform "LB_BIL_INVOICE" ?
I want to change the decimal notation of Smartform from "1.234.567,89" to "1,234,567.89".
Please reply.
Points will b awarded...
Thanx in Advance..

there are 2 ways that you can set these
1. Go to SU01, change the defaults Decimal Notation to X 1,234,567.89
2. If you have done 1st step, the notation still didn't change, put the below code in the initialization of smart forms:
SET COUNTRY ' '.
These should solve your problem.

Changing the Decimal Notation

Hello Experts,
We have a request to change the decimal notation of values. Please consider the below example.
Value: 450000 (Four lakhs and fifty thousand)
Actual Decimal Notation in the syetm is 450,000.00 (In thousands)
Expected Decimal Notation: 4,50,000.00 (In Lakhs)
Please advice where to set this up in the system.
Thanks in advance,
Regards,
Sekar

Dear,
Please go to Systems>User Profile>Own data,
It will open a screen for your user ID, now go to Default Tab and change the decimal Notation as per your requirement.
Hope this helps!!!
Br,Vivek

Can the iPhone have settings profiles? I want the settings of what apps are using the "call home" automatically set based on my location or the time of day. Is this possible?

Can the iPhone have settings profiles? I want the settings of what apps are using the "call home" automatically set based on my location or the time of day. Is this possible? Of course the GPS location feature will need to be on in order for this to work. But the idea here would be to optimize battery life by disabling the 'call home' requests of apps. The settings profile should also support downloads as I would like to download and allow it when I am on WiFi but not so much when I am using my cellular data.

No, this is not possible as the sandboxed nature of iOS would not allow any app to modify another app like that. Such a feature would have to be enabled by Apple as a part of iOS itself. You can submit feedback to Apple about the idea if you wish to.
https://www.apple.com/feedback/

Global setting for decimal notation setting?

Experts:
Where can I set the decimal notation for all users? Is there a global default setting for this?
I need to display numbers as xxx,xxx,xxx.xx.
Each individual user can set this in their Maintain User Profile -->Default settings.
But I need to have the system default for EVERY user to xxx,xxx,xxx.xx.
Your assistance will be rewarded.
Thanks
Den

Hi,
Go to SU10 - Mass change. Enter all the User list and make the changes.
Hope it will help u.

I cannot send an email from my iPad 2? No problem receiving, why does this happen? Have tried the suggestions for setting up email and after doing the sync mail through iTunes receiving worked great but still cannot send? Any help would be great

I cannot send an email from my iPad 2? No problem receiving, why does this happen? Have tried the suggestions for setting up email and after doing the sync mail through iTunes receiving worked great but still cannot send? Any help would be great!

The fact that you can receive means you have a valid e mail address, and have established the connection to the incoming server, so all of that works. Since the send does not work, that means your outgoing server is rejecting whatever settings you used formthe outgoing set up. Try them again.
Google your particular isp, and ipad and many times you will find the exact settings needed for your isp. Or tell us here, and soneone else may be on the same isp. Some mail services need you to change a port, or have a unique name for the outgoing server.
Kep trying.

I've got an iPad and iPhone 4S, both of which are set up for facetime. When someone calls me, both the iPad and phone ring, even though the phone is set to receive facetime calls on the number and the iPad is set for an email account. why is this?

I've got an iPad and iPhone 4S, both of which are set up for facetime. When someone calls me, both the iPad and phone ring, even though the phone is set to receive facetime calls on the number and the iPad is set for an email account.
How can I change the setup so on the email only the iPad rings and on the phone number only the phone rings?

No it's not stealing. They have an allowance that you can share with so many computers/devices. You'll have to authorize her computer to play/use anything bought on your acct. You can do this under the Store menu at top when iTunes is open on her computer.
As far as getting it all on her computer....I think but I am not sure (because I don't use the feature) but I think if you turn on Home Sharing in iTunes it may copy the music to her computer. I don't know maybe it just streams it. If nothing else you can sign into your acct on her computer and download it all to her computer from the cloud. Not sure exactly how to go about that, I haven't had to do that yet. I wonder if once you authorize her computer and then set it up for automatic downloads (under Edit>Preferences>Store) if everything would download. Sorry I'm not much help on that.

I installed my new Apple TV and successfully completed the configuration (Wireless network, Apple ID, and others) yet I am always in the Computers and Setting page- can't move to the main page – any idea on what and how, please?

Hello, I installed my new Apple TV and successfully completed the configuration (Wireless network, Apple ID, and others) yet I am always in the Computers and Setting page… can’t move to the main page – any idea on what and how, please?

Welcome to the Apple Community.
Unfortunately, a number of users appear to have encountered this problem. Some of these users have reported that the problem just disappears the following day or shortly after. Other users have found various other solutions to this problem.
Firstly, are you receiving any date and time errors when you turn on your Apple TV?
Check that you are properly connected to the Internet, by ensuring that you have a proper IP address and not one starting with 169. Also check that your location for the iTunes Store is set correctly, if so you might try changing it and then changing it back.
If the problem persists try restarting the Apple TV by removing ALL the cables for 30 seconds, or resetting it using the reset option under general. You should also try restarting your router, or if this doesn't work you might like to try a restore.

LR 5.5 upgrade. I only get the the 32 bit set up and an error when the 64 bit set up should be created. It says not enough disk space and no access to write. The disk space is ok and the 32 bit file was indeed created.

LR 5.5 upgrade. I only get the the 32 bit set up and an error when the 64 bit set up should be created. It says not enough disk space and no access to write. The disk space is okay and the 32 bit file was indeed created. I have Windows 7 Home edition.

Hi Rob, Thanks for your input. The temp location is on the C drive with 228 GB free space. My other drives have 123 GB and 204 GB of free space. I can see how the 32 bit set up is perfectly extracted when it stops when coming to the 64 bit set up. I have done the exercise several times and also made new downloads. I am using Norton 360 and Malwarebytes anti-malware but the dowload from Adobe should be trusted.

When downloading application updates, which are over a GB, my MacBook Air keeps logging me out and I have to start the download over. I have the power settings set to never turn off, and the display set to never go to screen saver.

When downloading application updates, which are over a GB, my MacBook Air keeps logging me out and I have to start the download over. I have the power settings set to never turn off, and the display set to never go to screen saver. Any suggestions?

I have the exact same problem/situation since a few days
I have not intalled a program lately.
Any progress Voratima??
Software Mac OS X Lion 10.7.5 (11G63)

The default print setting on my officejet 4620 is the fax.

The default print setting on my officejet 4620 is the fax. I can find no option to select the print option as the default in the control panel or any other menu. Thanks.

These may offer some help:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02762273&cc=us&dlc=en&lang=en&lc=en&product=519...
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&lang=en&lc=en&product=519...
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

HT1212 My daughter totally disabled the device by attempting to guess the password I set. How can I restore the device if iTunes is bombing out my computer?

My daughter totally disabled her iPod touch 3rd generation by attempting to guess the password I set. How can I restore the device if iTunes is bombing out my computer?

Not knowing what "iTunes is bombing out my computer" means all I can suggest is:
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

Why is the hour display set to 19 when I run the attached VI

Why is the hour display set to 19 when I run the attached VI?
Thank you.
Solved!
Go to Solution.
Attachments:
Untitled 1.vi ‏10 KB

Are you in US Eastern Time? This looks like an offset due to time zone (EST is -5 hours). Setting the UTC constant to TRUE will fix that.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

I cannot order photo prints from iphoto. Error says that the delivery address is in an unsupported country. The address and my account are in the UK. Does anyone have any ideas?

I cannot order photo prints from iphoto. Error says that the delivery address is in an unsupported country. The address and my account are in the UK. Does anyone have any ideas?

I cannot order photo prints from iphoto.
Are you trying to print from iPhoto on your Mac or iPad/iPhone? If you are trying to print form yor Mac, check, if the Print Products Store in the iPhoto Preferences > Advanced is set to U.K.
Also the bimmling address, Delivery address, the country for your AppleID and Credit Card must all be in the same country. Check this document:
http://store.apple.com/uk/help/print_products
-- Léonie

ME13-Difference in the decimal notation in amount in conditions

Dear All,
I get this issue in the conditions of ME13(PIR). The value in the database(KONP-KBETR) has 2 decimal places, whereas in the screen, decimal notation is not present. i.e., the value looks like being multiplied by 100. This is present only in one system. The other system shows the value as it is in the database. This is common for all users.
How can I change this? Is it some screen setting? Please help.
Thanks,
Sumanth

The database always stores the values with 2 decimals, but dependend on the currency settings the SAP programs that show the values to the user (except they are using SE16) or calculate values, or printing puchasing documents will take care to show it in the right form.
If you develope your own programs, then you have to take care about this by yourself.

Is the Decimal Notation Setting based on the country of the vendor?

Similar Messages

Maybe you are looking for