Is the "Device Class Definition for Physical Interface Devices" specification implemented in Windows?
Can I assume that Windows will be able to handle my physical interface device if I follow the "Device Class Definition for Physical Interface Devices" specification while writing the firmware?
I'm trying to develop a device which handles rumble output from applications such as games. Applications would include e.g. racing games or simulators. I'm hesitant to just clone Xbox 360 Gamepad or Sidewinder USB reports. I'd like to correctly declare my
device as something on its own while still making use of already implemented OS-specific drivers. The purpose of the mentioned specification is exactly that as far as I can tell. I wasn't able to find concrete information about its level of support though.
The "USB device class drivers included in Windows" page (sorry I'm not allowed to post links yet..) seems to link to WinUSB which I'm not sure what to do with.
Thanks for your response. Well if everything was implemented at that time and it's still available it should be fine since the specification document's last version is dated 1999. I was just hoping there would be any form of documentation whether it's
supported and by which degree so I don't go through the trouble of figuring out how the firmware should be written according to the specification just to find out there is no OS driver implementation for it which would render my work more or less useless.
So I suppose I'm forced to go the trial and error path?
Similar Messages
-
Error on live web server - Retrieving the COM class factory for component
I've had a good read of this forum and can't find the answer to this particular issue. Everything works fine until I upload my vb.net/crystal reports solution to my live production web server. The error I get when I try to open a Crystal Report from the web is:
Retrieving the COM class factory for component with CLSID {059AC10F-0010-4C43-8876-1FC7BEAF218B} failed due to the following error: 80070005.
It is the following line of my VB.net source code that causes the error.
Dim oRpt As New CrystalDecisions.CrystalReports.Engine.ReportDocument
I've installed CRRuntime_12_0_mlb.msi to my Windows 2008 / IIS7 web server (This is a 64bit server).
The website works fine on a 32 bit system but on this new server I keep getting the above errors.
I've tried resinstalling the crystal reports numerous times and restarting. I've also tried installing the SP2 version of the CRRuntime and still get the same errors.
I've added read/write permissions to Windows/Temp directory for Network Service.
I've tried to manually register sacommlayer.dll which registers correctly.
The website is not compiled into a binary, the aspx.vb files are simply uploaded to the webserver and compiled on the fly by the server.
I've tried to add <identity impersonate="true" userName="MACHINENAME\administrator" password="PASSWORD" /> into the web.config file to see if this gets any further.
It does however then errors on the following VB Line.
oRpt.SetDataSource(dsSWMP)
with the error
Failed to load database information.Error in File crSitewasteManagementPlan {BEC6811A-D612-4ED6-9AF7-B0C9BED7A966}.rpt:
Failed to load database information
I've also tried opening up the C: / D: drives to the NETWORK SERVICE account with full control (temporarily) to see if I can get past the errors, however this has not worked for me.
Any other ideas to why this might not be working? Ideally I would not like to be using the identity impersonation at all.
Kind Regards
JamesDear Ludek,
I have tried manually registering the sacommlayer.dll already however this didn't make a difference.
I have checked versions of this DLL between the 2 servers and they are the same. (v12.0.0.683)
Find below the logs from process monitor for the 64 bit server.
It definitely shows where it is failing.. any suggestions to fix it?
I can email more detailed logs if you supply me with your email address.
Kind Regards
James
processes from erroring 64 bit server
00:28:46.6463180 w3wp.exe 3948 RegOpenKey HKCR\Wow6432Node\CLSID\{059AC10F-0010-4C43-8876-1FC7BEAF218B} SUCCESS Desired Access: Read
00:28:46.6463685 w3wp.exe 3948 RegOpenKey HKCR\Wow6432Node\CLSID\{059AC10F-0010-4C43-8876-1FC7BEAF218B}\TreatAs NAME NOT FOUND Desired Access: Query Value
00:28:46.6463935 w3wp.exe 3948 RegQueryKey HKCR\Wow6432Node\CLSID\{059AC10F-0010-4C43-8876-1FC7BEAF218B} BUFFER TOO SMALL Query: Name, Length: 0
00:28:46.6464137 w3wp.exe 3948 RegQueryKey HKCR\Wow6432Node\CLSID\{059AC10F-0010-4C43-8876-1FC7BEAF218B} SUCCESS Query: Name
00:28:46.6464472 w3wp.exe 3948 RegOpenKey HKCR\Wow6432Node\CLSID\{059AC10F-0010-4C43-8876-1FC7BEAF218B}\Progid NAME NOT FOUND Desired Access: Query Value
00:28:46.6464701 w3wp.exe 3948 RegQueryValue HKCR\Wow6432Node\CLSID\{059AC10F-0010-4C43-8876-1FC7BEAF218B}\(Default) SUCCESS Type: REG_SZ, Length: 54, Data: InProcAdapterMonitor Class
00:28:46.6464924 w3wp.exe 3948 RegQueryValue HKCR\Wow6432Node\CLSID\{059AC10F-0010-4C43-8876-1FC7BEAF218B}\(Default) SUCCESS Type: REG_SZ, Length: 54, Data: InProcAdapterMonitor Class
00:28:46.6465262 w3wp.exe 3948 RegOpenKey HKCR\Wow6432Node\CLSID\{059AC10F-0010-4C43-8876-1FC7BEAF218B}\InprocServer32 SUCCESS Desired Access: Read
00:28:46.6465561 w3wp.exe 3948 RegQueryValue HKCR\Wow6432Node\CLSID\{059AC10F-0010-4C43-8876-1FC7BEAF218B}\InprocServer32\InprocServer32 NAME NOT FOUND Length: 144
00:28:46.6465759 w3wp.exe 3948 RegQueryValue HKCR\Wow6432Node\CLSID\{059AC10F-0010-4C43-8876-1FC7BEAF218B}\InprocServer32\(Default) BUFFER OVERFLOW Length: 144
00:28:46.6465958 w3wp.exe 3948 RegQueryValue HKCR\Wow6432Node\CLSID\{059AC10F-0010-4C43-8876-1FC7BEAF218B}\InprocServer32\(Default) BUFFER OVERFLOW Length: 144
00:28:46.6466137 w3wp.exe 3948 RegQueryValue HKCR\Wow6432Node\CLSID\{059AC10F-0010-4C43-8876-1FC7BEAF218B}\InprocServer32\(Default) SUCCESS Type: REG_SZ, Length: 196, Data: C:\Program Files (x86)\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\sacommlayer.dll
00:28:46.6466339 w3wp.exe 3948 RegQueryValue HKCR\Wow6432Node\CLSID\{059AC10F-0010-4C43-8876-1FC7BEAF218B}\InprocServer32\ThreadingModel SUCCESS Type: REG_SZ, Length: 10, Data: Both
00:28:46.6466578 w3wp.exe 3948 RegCloseKey HKCR\Wow6432Node\CLSID\{059AC10F-0010-4C43-8876-1FC7BEAF218B}\InprocServer32 SUCCESS
00:28:46.6466904 w3wp.exe 3948 RegOpenKey HKCR\Wow6432Node\CLSID\{059AC10F-0010-4C43-8876-1FC7BEAF218B}\InprocHandler32 NAME NOT FOUND Desired Access: Query Value
00:28:46.6467217 w3wp.exe 3948 RegOpenKey HKCR\Wow6432Node\CLSID\{059AC10F-0010-4C43-8876-1FC7BEAF218B}\InprocHandler NAME NOT FOUND Desired Access: Query Value
00:28:46.6467441 w3wp.exe 3948 RegCloseKey HKCR\Wow6432Node\CLSID\{059AC10F-0010-4C43-8876-1FC7BEAF218B} SUCCESS
00:28:46.6468194 w3wp.exe 3948 RegOpenKey HKU\S-1-5-21-3073440563-3662229771-834689312-1170_Classes\Wow6432Node NAME NOT FOUND Desired Access: Maximum Allowed
00:28:46.6468529 w3wp.exe 3948 RegOpenKey HKCR\Wow6432Node SUCCESS Desired Access: Maximum Allowed, Granted Access: Read
00:28:46.6468904 w3wp.exe 3948 RegOpenKey HKCR\Wow6432Node\CLSID\{059AC10F-0010-4C43-8876-1FC7BEAF218B} SUCCESS Desired Access: Read
00:28:46.6469158 w3wp.exe 3948 RegCloseKey HKCR\Wow6432Node SUCCESS
00:28:46.6469458 w3wp.exe 3948 RegOpenKey HKCR\Wow6432Node\CLSID\{059AC10F-0010-4C43-8876-1FC7BEAF218B}\TreatAs NAME NOT FOUND Desired Access: Read
00:28:46.6469678 w3wp.exe 3948 RegCloseKey HKCR\Wow6432Node\CLSID\{059AC10F-0010-4C43-8876-1FC7BEAF218B} SUCCESS
00:28:46.6471878 w3wp.exe 3948 QueryOpen C:\Program Files (x86)\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\sacommlayer.dll FAST IO DISALLOWED
00:28:46.6473271 w3wp.exe 3948 CreateFile C:\Program Files (x86)\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\sacommlayer.dll ACCESS DENIED Desired Access: Read Attributes, Disposition: Open, Options: Open Reparse Point, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a
00:28:46.6476098 w3wp.exe 3948 CreateFile C:\Program Files (x86)\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\sacommlayer.dll ACCESS DENIED Desired Access: Read Data/List Directory, Synchronize, Disposition: Open, Options: Synchronous IO Non-Alert, Non-Directory File, Attributes: n/a, ShareMode: Read, Delete, AllocationSize: n/a
00:28:46.6478526 w3wp.exe 3948 QueryOpen C:\Program Files (x86)\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\sacommlayer.dll FAST IO DISALLOWED
00:28:46.6479856 w3wp.exe 3948 CreateFile C:\Program Files (x86)\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\sacommlayer.dll ACCESS DENIED Desired Access: Read Attributes, Disposition: Open, Options: Open Reparse Point, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a
00:28:46.6482284 w3wp.exe 3948 CreateFile C:\Program Files (x86)\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\sacommlayer.dll ACCESS DENIED Desired Access: Read Data/List Directory, Execute/Traverse, Synchronize, Disposition: Open, Options: Synchronous IO Non-Alert, Non-Directory File, Attributes: n/a, ShareMode: Read, Delete, AllocationSize: n/a
00:28:46.6484770 w3wp.exe 3948 CreateFile C:\Program Files (x86)\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\sacommlayer.dll ACCESS DENIED Desired Access: Execute/Traverse, Synchronize, Disposition: Open, Options: Synchronous IO Non-Alert, Non-Directory File, Attributes: n/a, ShareMode: Read, Delete, AllocationSize: n/a
00:28:46.6489837 w3wp.exe 3948 QueryOpen C:\Windows\SysWOW64\inetsrv\w3wp.exe.config FAST IO DISALLOWED
00:28:46.6490819 w3wp.exe 3948 CreateFile C:\Windows\SysWOW64\inetsrv\w3wp.exe.config NAME NOT FOUND Desired Access: Read Attributes, Disposition: Open, Options: Open Reparse Point, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a
sacommlayer.dll 12.0.0.683
Edited by: sw1sher2 on Feb 18, 2010 1:55 AM -
HT204053 Can multiple people use the same Apple ID for their own devices?
Can multiple people use the same Apple ID for their own devices? I just set up my IPhone 4S (first time user) using the same Apple ID as my daughters and now we receive each others texts, do I need to set up my own Apple ID account?
Yes, you can. In fact it's recommended that you use different IDs for iMessage, FaceTime and iCloud. You can still share the same ID for iTunes without any issues.
You are getting each other's text messages because you're using the same ID for iMessage. To fix this, one of you should go to Settings>Messages>Send & Receive, tap the ID, sign out, then sign in with a different ID. To avoid getting each other's FaceTime calls, do the same thing in Settings>FaceTime. -
Hi all, i'm new to Mac book & Xcode. I'm learning and facing problems while creating a new file for Xcode. Before i upgrade the software, i have no issue to create simple steps in apps. After upgrade Xcode to 4.6 version, i'm facing lot's of issue eg.
1) "the identity "iphone developer" doesn't match any valid certificate/ private key pair",
2) can't select the box "with XIB for user interface" if the subclass is "UIViewController"..
Appreciate for any help rendered.Mikko777 wrote:So what is the best?
I wouldn't judge. I've been to Arch for a week, you know? But as said, it's VERY close to it.
What I dislike after a week is makepkg not handling dependencies automatically (which would be overhead, so probably not appropriate).
Mikko777 wrote:Also theres KDEmod for modular kde, dunno if its for 64 bits tho.
Don't actually need that as said ... I see no real benefit of having that other than not beeing a KDE user or having Gentoos useflags.
Mikko777 wrote:PS:You produce a lot of text and welcome smile
Yeah. Wonder why I'm still employed? So do I ... -
What is the Popup class used for
I always thought that a Popup should have some basic functionality, such as the pupup should close when:
a) the escape key is pressed
b) the popup loses focus
The popup class provides none of the above functionality and in fact seems to require some obscure code to
even get the keyboard focus to work properly.
Using a JWindow seems to provide the same functionality as a Popup.
JPopupMenu seems to support both of the above requirements.
Run the following program:
a) click on each of the buttons
b) click on an empty part of the frame
It appears to me that whenever you need a "popup" you should use a JPopupMenu.
Is the Popup class good for anything? Does it provide any functionality that I am not aware of?
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.text.*;
public class PopupTest extends JFrame
String[] numbers = { "one", "two", "three", "four", "five" };
public PopupTest()
getContentPane().setLayout( new FlowLayout() );
JButton popup = new JButton("Popup as Popup");
popup.addActionListener(new ActionListener()
public void actionPerformed(ActionEvent e)
popupPopup(e);
getContentPane().add(popup);
JButton window = new JButton("Window as Popup");
window.addActionListener(new ActionListener()
public void actionPerformed(ActionEvent e)
windowPopup(e);
getContentPane().add(window);
JButton menu = new JButton("PopupMenu as Popup");
menu.addActionListener(new ActionListener()
public void actionPerformed(ActionEvent e)
menuPopup(e);
getContentPane().add(menu);
private void popupPopup(ActionEvent e)
JList list = new JList(numbers);
list.setSelectedIndex(0);
PopupFactory factory = PopupFactory.getSharedInstance();
Popup popup = factory.getPopup(this, list, getLocation().x, getLocation().y);
popup.show();
Window window = SwingUtilities.windowForComponent(list);
if (window != null)
window.setFocusableWindowState(true);
KeyboardFocusManager.getCurrentKeyboardFocusManager().focusNextComponent(list);
private void windowPopup(ActionEvent e)
JList list = new JList(numbers);
list.setSelectedIndex(0);
JWindow window = new JWindow(this);
window.getContentPane().add(list);
window.pack();
window.setVisible(true);
window.setLocation(getLocation().x + 200, getLocation().y);
private void menuPopup(ActionEvent e)
JList list = new JList(numbers);
list.setSelectedIndex(0);
Component c = (Component)e.getSource();
JPopupMenu menu = new JPopupMenu();
menu.add(list);
menu.show(c, 0, 0);
list.requestFocusInWindow();
public static void main(String[] args)
PopupTest frame = new PopupTest();
frame.setDefaultCloseOperation( JFrame.EXIT_ON_CLOSE );
frame.setSize(500, 200);
frame.setLocationRelativeTo( null );
frame.show();
}you'd use Popup like JPopupMenu does, via a PopupFactoryYes you can get the Popu from the PopupFactory, but I think you are missing the point of my question. Popup has two methods, hide/show. It provides no other funtionality. I must write code to handle the escapce key and close the popup when it loses focus.
When I use a JPopupMenu and add a component to the menu, it appears to add some listeners to the component to handle the escape key and loss of focus.
I think it's safe to say that you're right when you say that it's preferable to use
JPopupMenu (my experience as well).That was my conclusion, but I was just wondering it I was missing anything.
It turns out that there are used in tooltips which, by essence, don't need any
input from the user (whether keyboard or mouse) I guess thats what I was missing, only use a Popup in tooltip type situations. -
Revision: 20651
Revision: 20651
Author: [email protected]
Date: 2011-03-07 12:21:11 -0800 (Mon, 07 Mar 2011)
Log Message:
Some MBean tests needed flex.management.jmx stuff in the allow classes list for the class deserialization validator so adding it in on BlazeDS 4.0.0_fixes.
Modified Paths:
blazeds/branches/4.0.0_fixes/qa/apps/qa-regress/WEB-INF/flex/services-config.mods.validat ors.xmlThank you very much!
I cant believe this little comment has been so helpful!
But yes it is:
I explain, despite my efforts to find, googled it, forums, faqs, etc...
no where it mentionned the manifest.fm file is... INSIDE the .jar!
Your comment "a zip" made me attempt to open it with winrar, and I found a manifest.fm file inside!
So far I was editing the one at the "source" of my project and rebuilding it with netbeans.
I am going to try that now.
Actually.... :( no its mentionning my main class!
Manifest-Version: 1.0
Ant-Version: Apache Ant 1.7.0
Created-By: 10.0-b19 (Sun Microsystems Inc.)
Main-class: courseworkjava3d.Simple3D
Class-Path:
X-COMMENT: Main-Class will be added automatically by buildWell I have no problems uploading you the .jar, it is for a coursework it is not a private project or whatever:
http://www.uploading.com/files/CM2LKWYU/BetaCourseworkJava3d_Final.jar.html
Oh and I felt on your comment "dont ask us" as if I was suppose to know... i'm a beginner, I did not know that! And I tried to give you so many infos so you dont lose your time if you want to help, especially as after my own research I found many, many results for this "main class" and I tried a few solutions!
Edited by: CupofTea on Apr 13, 2008 3:28 AM -
Revision: 20650
Revision: 20650
Author: [email protected]
Date: 2011-03-07 12:20:03 -0800 (Mon, 07 Mar 2011)
Log Message:
Some MBean tests needed flex.management.jmx stuff in the allow classes list for the class deserialization validator so adding it in on BlazeDS trunk.
Modified Paths:
blazeds/trunk/qa/apps/qa-regress/WEB-INF/flex/services-config.mods.validators.xmlThank you very much!
I cant believe this little comment has been so helpful!
But yes it is:
I explain, despite my efforts to find, googled it, forums, faqs, etc...
no where it mentionned the manifest.fm file is... INSIDE the .jar!
Your comment "a zip" made me attempt to open it with winrar, and I found a manifest.fm file inside!
So far I was editing the one at the "source" of my project and rebuilding it with netbeans.
I am going to try that now.
Actually.... :( no its mentionning my main class!
Manifest-Version: 1.0
Ant-Version: Apache Ant 1.7.0
Created-By: 10.0-b19 (Sun Microsystems Inc.)
Main-class: courseworkjava3d.Simple3D
Class-Path:
X-COMMENT: Main-Class will be added automatically by buildWell I have no problems uploading you the .jar, it is for a coursework it is not a private project or whatever:
http://www.uploading.com/files/CM2LKWYU/BetaCourseworkJava3d_Final.jar.html
Oh and I felt on your comment "dont ask us" as if I was suppose to know... i'm a beginner, I did not know that! And I tried to give you so many infos so you dont lose your time if you want to help, especially as after my own research I found many, many results for this "main class" and I tried a few solutions!
Edited by: CupofTea on Apr 13, 2008 3:28 AM -
I get the following error when i try and access a site I'm working on through internet explorer, but it works fine when i run it in the visual studio 2005 environment.<br /><br />(I'm trying to complete a pdf with form fields)<br /><br />======<br /><br />Retrieving the COM class factory for component with CLSID {85DE1C45-2C66-101B-B02E-04021C009402} failed due to the following error: 80070005. <br />Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. <br /><br />Exception Details: System.UnauthorizedAccessException: Retrieving the COM class factory for component with CLSID {85DE1C45-2C66-101B-B02E-04021C009402} failed due to the following error: 80070005. <br /><br />ASP.NET is not authorized to access the requested resource. Consider granting access rights to the resource to the ASP.NET request identity. ASP.NET has a base process identity (typically {MACHINE}\ASPNET on IIS 5 or Network Service on IIS 6) that is used if the application is not impersonating. If the application is impersonating via <identity impersonate="true"/>, the identity will be the anonymous user (typically IUSR_MACHINENAME) or the authenticated request user. <br /><br />To grant ASP.NET access to a file, right-click the file in Explorer, choose "Properties" and select the Security tab. Click "Add" to add the appropriate user or group. Highlight the ASP.NET account, and check the boxes for the desired access.<br /><br />======<br /><br /> // Initialize Acrobat by creating App object.<br /> CAcroApp acroApp = new AcroAppClass(); //<- Break happens here <br /><br /> // Create an AVDoc object<br /> CAcroAVDoc avDoc = new AcroAVDocClass();<br /><br />Does anyone know of a way to solve this? I'm trying to swap over from iTextSharp to the actual adobe sdk, as I've had some bugs with iText.
A lot to try and cover here.
>I saw that the one pdf was created in Adobe Designer 7.1 and the other in Amgraf OneForm Designer Plus.
Ok, we can only say anything about the first one. But you must find
out what kind of form it is if you want to work with it
programmatically: they are utterly unlike each other.
You cannot use FDF format with an a form made with Designer (also
called an XFA form or XML form). But you can import an XML file in
Acrobat.
>
>Based on the second part of your reply i'm assuming the way i'm currently passing the data to the pdf is the reason i get the following message
>
>"This document enabled extended features in Adobe Reader. The document has been changed since it was created and use of extended features is no longer available"
No, completely different issue. This file has been prepared specially
so it can be saved in Adobe Reader. Any change to the file will break
this. The only exception is Acrobat, which you cannot use.
No third party product can repair this, but Adobe's server product
LiveCycle Reader Extensions can put back the rights. You might use
this in conjunction with LiveCycle Forms.
Aandi Inston -
Hey guys,
I've used xp_cmdpowershell from SQL Server 2008 R2 to execute a powershell scripts.
One of this scripts creates a internetexplorer.application object.
When I execute this script on powershell(version 2.0), it runs.
But when trie to execute for xp_cmdpowershell it fails.
error output:
Retrieving the COM class factory for component with CLSID {0002DF01-0000-0000-C000-000000000046} error: 80070005
script example:
$ie = New-object -com 'internetexplorer.application'
$ie.navigate("http://www.google.com")
$ie.visible = 1
sleep -s 10
$ie.quit()
xp_cmdpowershell example:
EXEC master..xp_cmdshell 'powershell C:\DataLocalTopRonda\scr.ps1';
Anyone have any ideas? Any help will be appreciated.8007005 is typically 'Access Denied'. Did you verify DCOM permissions to this class object? Are you using the same credentials in the PowerShell console as what is being done in SQL?
Boe Prox
Blog |
Twitter
PoshWSUS |
PoshPAIG | PoshChat |
PoshEventUI
PowerShell Deep Dives Book -
Hi,
I have excel 2013 Professional installed and i have created a windows service to open the excel document and read it.
Service is running as System account.
Now when i am trying to access the excel doucment, it is throwin the exception as
EXCEL COM ERROR Error Retrieving the COM class factory for component with CLSID {00024500-0000-0000-C000-000000000046}
however, when i am using the console application running as administrator, i am able to open same file.
Any yes, i am using 64 bit service C++ and excel binaries are Any CPU.
Please note: I have already tried using dcomconfig and assigned full permission to the system user.
Is there any other solution for this issue.
regards
PushpendraHello Pushpendra,
Microsoft does not currently recommend, and does not support, Automation of Microsoft Office applications from any unattended, non-interactive client application or component (including ASP, ASP.NET, DCOM, and NT Services), because Office may exhibit
unstable behavior and/or deadlock when Office is run in this environment.
If you are building a solution that runs in a server-side context, you should try to use components that have been made safe for unattended execution. Or, you should try to find alternatives that allow at least part of the code to run client-side.
If you use an Office application from a server-side solution, the application will lack many of the necessary capabilities to run successfully. Additionally, you will be taking risks with the stability of your overall solution.
You can read more about that in the
Considerations for server-side Automation of Office article.
Consider using the Open XML SDK, see
Welcome to the Open XML SDK 2.5 for Office . Also any third-party components can be used instead. -
Photoshop convert error: Retrieving the COM class factory for component with CLSID
Hi Guys,
I am new to this forum and have already tried looking for the resolution for this error but unsucessful til now. Actually we have photoshop cs4 installed in our server and we use it to create thumbnails whenever a PSD file is uploaded to the application.
It was working fine but since few days, i am seeing the error (Photoshop convert error: Retrieving the COM class factory for component with CLSID {6568E194-96D8-4035-9087-99E4F75E9ABC} failed due to the following error: 80080005. ) in logs and also the server is not able to generate proxies.
Please help me get this sort out since it is in production.
Thanks,
YogeshHi,
Do you think that Crystal Report dont work with BO on Vista?
Because Really I did not find the solution.
Thanks in Advance -
Retrieving the COM class factory for component with CLSID
Hi, i've create a Windows Service in VB.NET.
When i start the service in my local machine this works fine. but wen i try to start the service in a Windows Server 2003 Standard SP2 X64...
In the Log File I found this error:
"Retrieving the COM class factory for component with CLSID {632F4591-AA62-4219-8FB6-22BCF5F62007} failed due to the following error: 80040154.
System.Runtime.InteropServices.COMException (0x80040154): Retrieving the COM class factory for component with CLSID {632F4591-AA62-4219-8FB6-22BCF5F62007} failed due to the following error: 80040154.
at SapConnector.Implementation.clsCompany.Initialize_oCompany()"
There are a incompatibility problems with x64 OS??
Please Help me.
Thanks.Hi! I see this is the most recent thread that deals with the Crystal Reports add-on not starting on a 64 bit Windows server. I read the SAP note #1090628. I see the solution is to recompile the add-on as a 32-bit app.
My question is: How do I do that? I have the Visual Basic Studio, and I have the standard download of Crystal that SAP allows. But that's it.
Does anyone know which part of all those little programs I need to re-compile, and how to do it?
Thanks,
Dante -
i am getting an the error.
Retrieving the COM class factory for component with CLSID {36D27C48-A1E8-11D3-BA55-00C04F72F325} failed due to the following error: 80070005 Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED)).Hi,
As MPP file is Microsoft Project File, if you have some question about using COM+ of Microsoft Project, I suggest you can create a new thread in Project Forum:
https://social.technet.microsoft.com/Forums/projectserver/en-US/home?filter=alltypes&sort=lastpostdesc
Thanks for your understanding.
Best Regards
Jerry Guo
TechNet Community Support -
Retrieving the COM class factory for component with CLSID Failed
Hi There,
We're still getting this report error on our hosted server after running the Crystal Redist msi:
Retrieving the COM class factory for component with CLSID {11BD5260-15B6-412D-80DB-12BB60B8FE50} failed due to the following error: 8007007e.
The file associated with the class is: "C:\Program Files\Common Files\Business Objects\2.7\Bin\sacommlayer.dll"
What's the best way to get sacommlayer.dll install on the server?
Thanks.
Paul OWhen you deployed the msi, did the file get installed and registered (not in the GAC, but in the registry with that CLSID)?
Sincerely,
Ted Ueda -
Hi,
I have this problem
Error:Retrieving the COM class factory for component with CLSID {} failed due to the following error: 8004154
How can i resolve this ?Hi,
Do you think that Crystal Report dont work with BO on Vista?
Because Really I did not find the solution.
Thanks in Advance
Maybe you are looking for
-
How can I sign up with Enterprise program, while I have an active membership of the iOS developer program? I have bought a memership for the iOS Developer program. I have created an in-house app. Now I want to publish it to all employees without regi
-
Sap script - using form-endform
I have used follwing code in subroutine,but in quality control this is rejected because of "structure" keyword. FORM GET_TKNUM TABLES CT_INTAB structure ITCSY CT_OUTTAB structure ITCSY.
-
I've tried several times to download documents created in Pages to my laptop (also in Pages), but the documents never appear. (I've used searchlight to find them, but the documents never turn up.) If I try to copy the text from the icloud documents
-
Account Hacked and credit bought
Skype team, This morning at 9am (Argentina time) I recieved and email from skype support saying that my primary email address had been changed to *edited for privacy* As I didn't performed this change I inmediately changed my email address settings a
-
How to start the job immediately ?
Hello, In program we submit another program in background job using JOB_OPEN. SUBMIT program .... and JOB_CLOSE. But this job will be schedule, Now we need that it will be started immediately after we submit it, How can we do that ? Thanks