Is the FanControlDaemon folder in /library Apple or third party?

I was getting constant errors
kernel[0]: SMC::smcReadKeyAction ERROR TC0D kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff802a9a0000
on my MBP 2011 in Console and my fan was blowing like crazy all the time until I uninstalled all third-party fan software and the f older in the title. Now, I don't know if the folder in the library should be there or not (the assignment 'daemon' is not used much in Mac I don't think) so it's sitting on my desktop for now. But the fan has stopped screaming and I have no more SMC errors on Console.
I do have a question though. I have free third party widgets (Temperature Monitor) that monitor some temperatures but I don't know how accurate they are. I am a bit confused though. Right now the only visible applications running are Finder, Safari, and Console (well, throw Dashboard in there too) and it's quiet as a mouse. The temperature readings I'm getting are as follows:
Left Palm Rest 25
Main Heatsink2 38
CPU A Proximity 46
CPU A Temperature Diode 48
When I have a bunch of applications going that really tax the CPU the last figure can go into the 80's, fan full blast, but always goes back into the 70's or 60's quickly. When everything is at rest it's as above. No other problems except application specific ones like Mail.app.
I don't understand the difference between the Heatsink and CPU A Proximity and CPU A Temperature Diode. Which one should be concerned more about?
And, again, can I delete the FanControlDaemon folder or should I put it back?
Thanks a lot.

All of the temperatures that you report are normal for the types of usage involved. I am always concerned about the temperature that has the highest value, which usually is the CPU. I ignore the rest.
In regards to 'FanControlDaemon' go to the developers website and get the appropriate uninstall instructions. Sometimes one has to reinstall an application and then follow the uninstall instructions in order to rid the MBP of all its elements.
Ciao.

Similar Messages

I want to open a domain.site2 file outside the default folder (User/Library/Application Support/iWeb) with iWeb11, but iWeb only opens the domain file in the default folder. If I delete the default domain file, iWeb wants to create a new site. Help please

I want to open a domain.site2 file outside the default folder (User/Library/Application Support/iWeb) with iWeb11, but iWeb only opens the domain file in the default folder. If I delete the default domain file, iWeb wants to create a new site. Does anyone have the same problem or know how to fix it?

In Lion the Finder folder is now invisible. To make it permanetely visible enter the following in the Terminal applicaiton window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
For opening your domain file in Lion for the first time or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an applicaiton.
Just launch the applicaiton, find and select the domain file you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
tell application "iWeb" to activate
OT

What does the HSTS.plist file in the Cookies folder in /Library ?

What does the HSTS.plist file in the Cookies folder in /Library ?
If I open it in TextEdit it is filled with sites I never have visited.
Does anybody know where this file is used for ?
Thanks

I also have this file in the same folder in the same location with two other 'documents' called:
1. com.apple.appstore.cookies
2. Cookies.binarycookies
Document type shows as 'OOPlistDocumentType'.
Yes lots of website addresses and at least one known spam tel number. The top line of the text when opened by TexEdit is as follows:
bplist00“ ∑_ )com.apple.CFNetwork.defaultStorageSession_ !hstsd Disk Storage Schema Versionﬂ ±
This is a bit of a worry ........

HT1473 Help I just moved my music files to a external hard drive and am using the new crappy version ( i know my opinion) of itunes and cant add the files to my libray it gives me the add file to library option but not the add folder to library option wha

Help I just moved my music files to a external hard drive and am using the new crappy version ( i know my opinion) of itunes and cant add the files to my libray it gives me the add file to library option but not the add folder to library option what am i doing wrong?

In iTunes 11 uncheck the preferences setting in in the iTunes Preferences panel "Advanced > Copy Files to iTunes Media folder when adding to Library"

Give me the Configuration steps for intercompany billing and third party s

Hi Gurus,
Give me the Configuration steps for intercompany billing and third party sales and give me a brief description with examples.
Regards,
YSR

Dear YSR
Check the links
[Cross Company Configuration|http://help.sap.com/bp_bblibrary/500/Documentation/J62_BB_ConfigGuide_EN_DE.doc]
[Third Party Without Shipping Notification|http://help.sap.com/bestpractices/BBLibrary/html/J55_ThirdPartyWOSN_EN_US.htm]
Third party order processing is as follows:
Assume three companies X, Y and Z
X - The company,
y - The customer
Z - Vendor
When ever X gets a PO from Y to supply some goods, X has an option of either manufacturing those goods or procuring those goods.
If he is procuring the goods, there are two methods that are generally followed:
Method 1)
After receiving the PO from Y, X creates a sales order against Y.
Now at the same time he also creates a PO to a vendor Z to produce the goods
Z produces the goods and supplies to X
X receives the goods from Z
Then X delivers the same goods to Y.
After that X invoices Y and Z invoices X.
Note : Here there is no direct/ Indirect relation between Z and Y.
This process is known as Trading Process. and the Material here is created with Material type HAWA.
The other method is a Third party order processing method:
Here the glaring difference is that instead of Z supplying the material to X and X in turn supplying the same material to Y.
X authorizes Z to supply the material to Y on his behalf and notify him once the delivery is complete.
Now Z supplies the material to Y and acknowledges the same to X.
Z will send a copy of delivery acknowledgement and invoice to X.
After receiving the delivery confirmation and invoice from Z, X has to verify the invoice and this process is known as invoice verification and is done in SAP through Tcode MIRO.
The next step for X is to create an invoice and submit to Y
Only after the invoice verification document is posted then only X can create an invoice for Y.
This is the business flow that is followed for third party order configuration.
There are few steps that have to be configured to enable the system to function as mentioned above.
Step1)
If you are always followwing a third party process for a material then you have to create the material using item category group BANS.
The procument type should be marked as External procurement (F) in MRP 2 view of the material master record.
if you are not always allowing third party order processing then u can create a material master record with item category group as NORM and the procurement type should be marked as ( X) meaning both types of procurment ( in house manufacturing and external procurement).
Step 2)
the item category in the order should be manually changed as TAS.
For that you need to confugure the item category determination
ord type + item cat grp + usge + Hiv level = Item cat + Manual item cat
OR + NORM + + = TAN . + TAS
OR + BANS + + = TAS
Step 3)
make sure that during the item category configuration for TAS you need to mark relevnat for billing indicator as F
Step 4)
The schedule line cateogry for this type should be CS.
make sure that you mark subsequent type as NB - purchase requisition in this schedule line category as this will trigger the purchase requision order immediately after the creation of the sales order and the PO to vendor is created against this purchase requiesion.
thanks
G. Lakshmipathi

Multiple users on home LAN sharing both the Music folder and library

Hi there,
I've been hunting around the web and not found anything that helps me with this specific situation though various articles come close but I've not actually succeeded yet, I was wondering if anyone can help.
I have a Windows XP home PC, 2 user login profiles, both share the same music folder but have different librarys.Using Itunes 10.
I've recently purchased a NAS, I have successfully moved the music folder to the NAS and now also have a netbook (windows 7) seeing the same music folder.
What I want is to have any users/PCs to have the same music folder and the same library on Itunes.
Where I come unstuck is the library as I want the library from the primary user on the PC to be the master, I want this located on the NAS and I want any machine/user to share this same library. I know it's the Itunes folder in My Music, I can easily move that but most forums suggest starting Itunes holding down shift andselecting a new library but I do not get this option.
Instead, I go into the library options but the library command to compile (can't remember exactly that command) seems to retain the local library store.
Is there a way I can just add my NAS located music folder and point Itunes to a different itunes folder for the library?
Separately, I'd like to know if there is an option to keep a local copy of the music and photos folders, I'd like the netbook to be able to this as a backup of the NAS.
Really appreciate any help on this.
Thanks.

It is not really practical for multiple users on different PCs to use the same library database. This is because the iTunes database is not multiuser, the can however share the same content files.
So each PC will need it's own library database (iTunes Library.itl) which in this case is best located on the users own PC.
Utilities such as Tune ranger can keep libraries in sync:
http://www.acertant.com/web/tuneranger/
For backup, some people find synctoy a free utility from Microsoft works for them.
http://www.microsoft.com/downloads/en/details.aspx?FamilyID=c26efa36-98e0-4ee9-a 7c5-98d0592d8c52

Suggestion for Apple or Third-party software company?

My first question is, where should I post the following suggestion for an improvement in FCP or for the creation of a third party software – suggested sites, blogs, etc.?
Next, my recommendation, and then my explanation of the reason why (including my personal semi-disaster):
Recommendation: That someone create a “Project Management” software for FCP (essentially a file management program that runs in the background) that organizes and tracks all of the files created during editing/post production – including the log/capture or log/transfer of the original footage, the audio files, stills, effects, etc, AND all of the files created by the program -- Live Type, Motion, Soundtrack Pro, and Color (especially color). The reason for this is that FCP has an incredibly complicated filing system that results in shots, files, documents, etc., being distributed all over the place – and not all known to the filmmaker or identified in the documentation. And, that condition can lead to disaster – see below.
Explanation: I just finished my first HD project using Studio 2, including sound track pro and color. After completing what I though was the absolute final version, I burned a one-off DVD and ran it by several filmmaker and non-film maker friends. They all spotted a small sound problem with one cut, so I went back to tweak it – and discovered that ALL of the footage had gone offline. I had nothing, nada, zilch. I had saved earlier sequences (rough cut, polished cut, etc.) and all the original footage appeared, but I had taken the final version into color for some corrections and adjustments, and ALL of those shots/files were missing.
After burning what I believed to be the final cut, I had cleaned up my hard disk, moving stuff to my backup hard disk, to my RAID array, and to the trash. So, after the initial shock and complete panic, several hours of searching all of these drives, led me to the file that contained the files that contained the color corrections – in my trash, which fortunately had not been emptied. I have no idea where the files were before or how they got into the trash – obviously they were not added to the scratch disk with all of the original footage.
Part of the difficulty of finding the shots was the discovery that color creates a file folder, that holds a set of file folders, each of which holds only one shot. In order to reconnect, I had to move the parent folder to the desktop, and then move all of the shots, one at a time. into a single folder, and then point reconnect to that folder. Problem solved.
However, now I face that question of archiving the project, moving all of the files off my hard drive so I can use the space for my next film, and I am terrified that I will leave something out, and not be able to recover the project in the future. Having a project management software that organizes and coordinates all of that would be a lifesaver – and well worth the purchase price.
Anyone who would like to explore this idea, please feel free to contact me – [email protected].

You've just learned a hard lesson. Put your current energy into your education, not finding a way to wallow in ignorance.
There already is a hardware device that will do what you want. It's called a "manual". In particular, the sections that relate to "where the program stores media". Pay very close attention to those sections and set up your computer so that all the scratch and storage pointers are aimed where you want. It's very simple to have them all go to one drive.
Then, when it's time to archive the project because you are starting a new project, just purchase another hard drive for the new project. They are absurdly inexpensive these days.
Remove the drive with your project to be archived from your computer (since you now know how to keep all the files organized, they will be all together) - and plug in a new disk for the next project.
If you want a backup, use carbon copy cloner to simply duplicate the drive (or simply just copy the relevant folders- you'll know which ones) to another drive (or get a RAID 1 device)
good luck,
x

Suggested utility for SECURITY -using Photo Booth! Apple? Third Party?

(If this isn't the proper venue for suggestions, please forward this accordingly)
If anyone knows of some shareware/freeware/commercial ware out there that already does this, PLEASE share the info here.
Otherwise, code writers, PLEASE CONSIDER THIS IDEA FOR ENHANCED SECURITY. Password protection's fine, and, properly used, very effective for deterring casual snoopers. Still, existing Mac OS and equipment needs probably just a few lines of code to offer SUBSTANTIALLY improved evidence of who's been trying to peek into my files.
For all Macs with the built-in camera and Photo Book, consider this little trick:
Anytime a password-protected login screen comes up, Mac first opens Photo Booth (unannounced, completely unbeknownst to the user). If user enters a wrong password, FOOSH -- that white flash of the screen captures the would-be user's face looking directly into my screen. It repeats the process for every failed entry until an administrator-determined threshold says to shut down everything for an administrator-determined time frame.
Given the right password, or course, Photo Booth quits. This security utility comes back up anytime a password is required to gain access.
Further, as I remember from Kensington's Pass Proof program, OSX saves a journal entry (accessible only to Administrator) of "failed logon attempts" with that image, the time of day, and the wrong password (to help me get an idea of who's perhaps gotten an idea of what my password MAY be.) When it happens, Mac does NOT tell the uninvited guest. If he/she's no threat, fine, I just apprise the person of the proper logon. And if I find a photo of someone I really do NOT want anywhere near my stuff, I have PHOTO EVIDENCE of the attempted log on — and some insight into his/her knowledge of my passwords.
Seems like a fairly simple routine to program. Can't someone come up with this as a new security feature of OSX? Or maybe even a third party? I'd gladly pay $10 for shareware that gives me this definite, undeniable information.
Thanks for listening.

"If this isn't the proper venue for suggestions, please forward this accordingly"
http://www.apple.com/feedback/

Error while creating the proxy object to connect to a third party tool.

Hi,
I tried creating a proxy object with the wsdl file. I even created a HTTP connection to the third party tool. but when I try to execute the whole proxy object, I am getting the below error. Can anyone help me on this?
"Proxy-Generierung: Fehler aufgetreten"
"Incorrect value: Entity "<<document>>"(92 /3788 ). end tag 'ul' does not match begin tag 'p'"
Thanks & Regards,
Veerabhadra Rao A.

do a check on the wsdl file and how you are passing values in the proxy. The tags for XML are not correct. Open the WSDL in IE and see there must be an error. Or probably when passing the actual values to the XML generated each element is not closed properly. Error says tags dont match.
Edited by: Kshamatha Eda on Mar 5, 2010 10:54 AM

Does Resetting Internet Explorer Maintenance settings from GPO will also remove the proxy set in IE by a third party tool when the GPO refreshes for the first time

Hi,
We have two GPO's with IE maintenance (Preference Mode Configured)
The settings it has are
1. Automatically detect configuration settings - Set to Enabled.
2. Automatic Browser configuration - Not configured.
We do not have proxy value set in IE through this GPO.
We have proxy set in IE through a third party tool (TPT) which updates the proxy at logon event 5 and 10.
Does Resetting Internet Explorer Maintenance settings from these GPO's also clear proxy set in IE by third party tool after the first GPO refresh.
I am sure the second time when the GP refreshes, the client won't find any IEM settings and hence there is no question of the proxy set in IE by TPT to erase. It is only the first time of the GPO refresh that I am concerned about.
Can someone please guide as I am planning to do the same in our production and concerned about the downtime caused due to the proxy being removed if at all for the first time.

It will disable the proxy server option in Internet Options (untick the box), but will still store your proxy details.
Thanks
Ryan

Enhancemnet in the include RV03VFZZ to send request to third party system

Hi Experts,
I am using Enhancemnet in the include RV03VFZZ to send the request to third party system(ADEXA) and get the response using proxy and place that in the sales order.
If there is no response from ADEXA system means 'reason for rejection' field has to be filled with some reason. Now I want to know which is the structure that updates the 'reason for rejection field'. the screen field is VBAP-ABGRU and program name is SAPMV45A.
help me in updating the 'reason for rejection field'.
Regards,
Hari Krishna

You can use the below to populate the order reason at the respective levels.
1.FORM userexit_save_document_prepare in MV45AFZZ for VA01/VA02
2.FORM USEREXIT_PRICING_PREPARE_TKOMK in RV60AFZZ for VF01/VF02 and VF04
If you are in ECC then first preferrence should be for Enhancement Framework rather than using Classical User exits.You can check Enhancement Spots ES_SAPMV45A and ES_SAPLV60A for the above requirements or you can even implement using Implicit Enhancement within the subroutines of MV45AFZZ and RV60AFZZ.
TVAUT is the table for Order reasons with descriptions.
Thanks,
K.Kiran.

What are the query types,Objects CRM provides for third party

What are the query types,Objects provided by the CRM so that it can be called by third party for integartion pupose.

First, that statement - and those materials - refer to the "legacy" StreamInsight query/adapter model. They do not refer to how things work with the Reactive model introduced in version 2.1. Specifically, it talks about Dynamic Query Composition (DQC).
You cannot use a deployed Observable in another instance of StreamInsight. You may be able to use them across applications in the same instance - off the top of my head, I'm not sure. I'm getting ready to get on a plane but will take a look at it later.
Typically, however, applications act as containers (comparable to .NET AppDomains) so I don't think that you'd be able to do this easily. That said, the code and assemblies
can be reused across multiple instances/applications. You would have separate instances of the classes involved but you would be able to reuse the query logic. That's a common use case.
Can you be more specific about your use case and what you are trying to accomplish here? It's possible that there are alternative ways to do what you are trying to do.
DevBiker (aka J Sawyer)
Microsoft MVP - Sql Server (StreamInsight)
If I answered your question, please mark as answer.
If my post was helpful, please mark as helpful.

Where is the Services folder in Library in Lion?

I used Terminal to make my Library folder appear, but there's no Services folder inside. I'm pretty sure there used to be one.

Dan, there are two Library folders, one visible to all users, the other visible to the logged-in user, that is the one you do not normally see in Lion, must press Option/Alt Key.
You may have Services folder in both, as you may have other folders with identical name inside the Library folder. The difference is that one makes things visible to all users, the other to the logged-in user only, the difference being important if there are more users with the same computer.

Where is the mail folder use/library in MacOS X 10.7.5 in a Mac Air?

I would like to know how to find the folder wher the mail application is storing the mails in the MacOS X 10.7.5
I know is somewhere in mail/ library, but I am unable to find it. Perhaps is hiden and I don't know how to locate it.
Thank you very much.

Actually it's in youruser/Library/Mail. The user's Library folder is hidden by default in 10.7 and later, but if you go to Finder, hold down the Option key, and select the Go menu, the Library folder will be shown in the dropdown list and you can open it from there.
Regards.

Windows 7 Home Premium 64 bit. I have iTunes 11.0.1.12 installed. iTunes is not letting me drag and drop folders or files to the library. iTunes also will not add songs by using the Add folder to library option. I can only add songs individually.

Any help would be appreciated. Nothing obvous seems to work. Very frustrating.

I don't have a Recently Added playlist. However, I discovered that the file I had named Eating Healthy was given the name You Can Enjoy Eating Healthy when it copied to iTunes. I'm guessing iTunes pulled the full name of the piece from the internet. Upshot--the mp3 did transfer to iTunes on all 3 tries, but I was looking in my alphabetized list under E, not Y, so I didn't see it there. Thanks for your help.

Is the FanControlDaemon folder in /library Apple or third party?

Similar Messages

Maybe you are looking for