Is the fingerprint sensor a requirement to use on the iPhone 5S?

Can I still use my password if I want or turn off the fingerprint sensor on the upcoming iPhone 5S?

Well, Apple has stated to the WSJ that the scanner sometimes doesn't work with moisture-laden fingers covered in sweat, lotion or other liguids. Further, fingers scarred by surgery or accidents. And, if the phone is reset or not unlocked for at least 48hrs, only the passcode will unlock it. And, remember, Apple says this is an "improvement" from such scanners in the past. Thus, unless Apple is planning on long lines at the genius bar or returns, there will be a setting to disable this.

Similar Messages

Fingerprint Sensor/Reader not working?

I completely wiped my computer clean with a fresh recovery since I had problems. Everything has been running smoothly except the Fingerprint sensor. When I used to swipe my finger it would light up and HP SimplePass would open up. Now nothing happens. The computer doesn't seem to recognize or read the sensor.
I checked on "control panel\hardware and sounds\biometric" and the status shows AuthenTec Unavailable. I contacted HP customer service almost 5 times in the past 4 hours to get this resolved but all said the same thing "install/uninstall" HP SimplePass and AuthenTec. Made my mind go crazy in having to re-boot my computer every 10 minutes.
The sensor is completely dead, nothing happens when I swipe my finger. And every rep has been telling me the samething that hasn't fixed the problem, just more headaches. Please does anyone have a fix for this?
Laptop Model:
HP Envy M4-1015dx
Windows 8 64-bit

So on the login screen you're not getting that option. OK.
Go into safe mode and let me know if that option is available.
THX

Is there a way to turn 'passcode on immediately' while also using the fingerprint sensor?

If I turn my fingerprint sensor on in the new iPhone 5s to use as the passcode, it requires it to be used immediately after locking. I would like to change this to 1 minute but there aren't any other options when the fingerprint sensor is on. Is there a fix to this?

i am wondering the same thing. Also there should be an option where you ONLY have the fingerprint unlock instead of also having the numerical password when sliding phone.

How can I use my HP built-in fingerprints sensor

Hello. I have a DV7 Pavillion that comes with a built-in fingerprints sensor. I bought this laptop in 2010, and the problem is that the software company that used to be in charge of this feature, DigitalPersona, abandoned it and they no longer update the program, which makes it imposible to use online, and I think it isn't working at all even offline. So, my question is, can I still use the fingerprints sensor? Is there the option of downloading another software? How can I do that?
Thank you for your replies. I am new using this forum, so I hope I am not doing anything wrong.

Sorry for the late response.
I'll be more than happy to help you with this issue.
First could you provide me with the full model name and number of the notebook you have.
Also, I have a couple of questions for you.
What exactly is the issue with the fingerprint reader?
Can you log into windows with it?
Can you access websites with it?
Does the program simple pass give you any issues?
Or are you just curious on how to work the fingerprint reader in windows 8?
THX

Is the fingerprint sensor really a fingerprint sensor?

I'm confused.
I'm sure many of you have seen those videos of a man unlocking his iPhone 5S with his nipple with the fingerprint sensor and another using his cat's paw to do the same.
If the sensor is as what Apple says... a fingerprint sensor reading and storing our fingerprint data, how is this possible? Since I'm thinking that there is no fingerprint pattern there.
Unless the sensor is just a glorified scanner, taking pictures of the pattern of the skin and then just comparing the two images.
Appreciate any feedback?
Thanks.

The finger print reader just takes high resolution pictures of what ever you set up on touch Id so if they are putting it up to whatever they choose it will just take a high resolution picture of that and then when they try to use it, touch I'd will just compare the picture they used to setup with touch id with the picture they are trying to sign in and if it is a match then it will unlock

My iPhone 4S will not sync to iTunes. I've download the newest version of iTunes several times but when plugging my phone in it says "The iPhone cannot be used because it requires iTunes version 10.6.3 or later."

My iPhone 4S will not sync to iTunes. I've download the newest version of iTunes several times but when plugging my phone in it says "The iPhone cannot be used because it requires iTunes version 10.6.3 or later." HELP!

If you're using Windows try uninstalling iTunes and all of its components as by following this guide exactly: Windows XP or Windows Vista/7, then reinstall the latest version of iTunes. You must follow this guide exactly or it will not be successful. Note: uninstalling iTunes will only remove the application; it will not touch your iTunes library or data.

Ever since the systyem upgraded me to 3.6.6. I can not even run one eight hour day without firefoc either crashing or locking up which requires me use C/A/Deleate to close the program. I used to be able to run 8 to 12 windows at a time and NEVER lock up

Ever since the systyem upgraded me to 3.6.6. I can not even run one eight hour day without firefoc either crashing or locking up which requires me use C/A/Deleate to close the program. I used to be able to run 8 to 12 windows at a time and NEVER lock up or crash with the older version. Is this problem being looked into and or being corrected. I use Firefox with Google and my system is XP Pro 32 bit. THIS IS REALLY making me MAD. My email is [email protected] and would appreciate a response to this ASAP. I have tried a couple of items from your help section and nothing works.

'''Anonymous'''
Please post a separate question. Thank you. https://support.mozilla.com/tiki-ask_a_question.php?locale=en-US&forumId=1
'''chris'''
'''''Crashing'''''
See:
http://support.mozilla.com/en-US/kb/Firefox+crashes
http://kb.mozillazine.org/Firefox_crashes
http://support.mozilla.com/en-US/kb/Firefox+crashes+when+loading+certain+pages
http://support.mozilla.com/en-US/kb/Firefox+crashes+when+you+open+it
http://support.mozilla.com/en-US/kb/Firefox+will+not+start
http://kb.mozillazine.org/Browser_will_not_start_up
'''''Hanging'''''
See: http://support.mozilla.com/en-US/kb/Firefox+hangs
'''''Hanging at exit'''''
'''Kill Application'''
In Task Manager, does firefox.exe show in the '''Processes''' tab?
See: [http://kb.mozillazine.org/Kill_application Kill Application]
'''Causes and solutions for Firefox hanging at exit:'''
[[Firefox hangs]]
[http://kb.mozillazine.org/Firefox_hangs#Hang_at_exit Firefox hangs at exit]
[[Firefox is already running but is not responding]]
'''''Safe Mode'''''
You may need to use '''[[Safe Mode]]''' (click on "Safe Mode" and read) to localize the problem. Firefox Safe Mode is a diagnostic mode that disables Extensions and some other features of Firefox. If you are using a theme, switch to the DEFAULT theme: Tools > Add-ons > Themes '''before''' starting Safe Mode. When entering Safe Mode, do not check any items on the entry window, just click "Continue in Safe Mode". Test to see if the problem you are experiencing is corrected.
See:
'''[[Troubleshooting extensions and themes]]'''
'''[[Troubleshooting plugins]]'''
'''[[Basic Troubleshooting]]'''
If the problem does not occur in Safe-mode then disable all of your Extensions and Plug-ins and then try to find which is causing it by enabling '''one at a time''' until the problem reappears. '''You MUST close and restart Firefox after EACH change''' via File > Restart Firefox (on Mac: Firefox > Quit). You can use "Disable all add-ons" on the Safe mode start window.
'''chris'''
'''''Other Issues''''': ~~red:You have installed plug-ins with known security issues. You should update them immediately.~~
'''Update Java''': your ver. 1.6.0.~~red:17~~; current ver. 1.6.0.20 (important security update 04-15-2010)
(Firefox 3.6 and above requires Java 1.6.0.10 or higher; see: http://support.mozilla.com/en-US/kb/Java-related+issues#Java_does_not_work_in_Firefox_3_6 )
''(Windows users: Do the manual update; very easy.)''
~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
See: '''[http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates Updating Java]'''
Do the update with Firefox closed.
'''NOTE:''' Java version 1.6.0.21 has been released. It is mainly an update for developers of Java applications and most users do not need to be concerned about downloading version 1.6.0.21. '''''At this time''''', the update option in existing installations of Java 1.6.0.20 are not updating to version 1.6.0.21; '''''at this time''''', it must be manually downloaded and installed. According to the Java release notes:
''"'''Bug Fixes'''''
''Java SE 6 Update 21 does not contain any additional fixes for security vulnerabilities to its previous release, Java SE 6 Update 20. Users who have Java SE 6 Update 20 have the latest security fixes and do not need to upgrade to this release to be current on security fixes."'' Source: http://java.sun.com/javase/6/webnotes/6u21.html
'''Install/Update Adobe Flash Player for Firefox (aka Shockwave Flash)''': your ver. 10.0 r~~red:45~~; current ver. 10.1 r53 ('''important security update 2010-06-10'''; see: http://www.adobe.com/support/security/bulletins/apsb10-14.html)
~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
See: '''[http://support.mozilla.com/en-US/kb/Managing+the+Flash+plugin#Updating_Flash Updating Flash]'''
-'''use Firefox to download''' and '''SAVE to your hard drive''' (save to Desktop for easy access)
-exit Firefox (File > Exit)
-''In Windows,'' check to see that Firefox is completely closed (''Ctrl+Alt+Del, choose Task Manager, click Processes tab, if "firefox.exe" is on the list, right-click "firefox.exe" and choose End process, close the Task Manager window'')
-''In Windows,'' double-click on the Adobe Flash installer you just downloaded to install/update Adobe Flash
-when the Flash installation is complete, start Firefox, and test the Flash installation here: http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_15507&sliceId=1
*'''NOTE: On Vista and Windows 7''' you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
*'''NOTE for IE:''' Firefox and most other browsers use a Plugin. IE uses an ActiveX version of Flash. To install/update the IE ActiveX Adobe Flash Player, same instructions as above, except use IE to download the ActiveX Flash installer. See: [[ActiveX]]
*Also see: http://kb.mozillazine.org/Flash ~~red:'''''AND'''''~~ [[How do I edit options to add Adobe to the list of allowed sites]]
'''Update Shockwave for Director (aka Shockwave Player)''': your ver. ~~red:10.1 (very old)~~; current ver. 11.5.7.609 (important security update released 2010-05-11; see http://www.adobe.com/support/security/bulletins/apsb10-12.html)
NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
SAVE the installer to your hard drive (Desktop is a good place so you can find it). When the download is complete, exit Firefox (File > Exit), locate and double-click in the installer you just downloaded, let the install complete.
See: '''[http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox#_Installing_Shockwave Installing Shockwave]'''
'''You '''~~red:'''MAY'''~~''' need to Update Adobe Reader for Firefox (aka Adobe PDF Plug-In For Firefox)''': your ver. N/A; current ver. 9.3.3 (important security update release 06-29-2010; see: http://www.adobe.com/support/security/bulletins/apsb10-15.html)
~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
See: http://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox#Installing_and_updating_Adobe_Reader
''You may be able to update from the Adobe Reader installed on your system'' instead of going to the Adobe site and downloading. Open the Adobe Reader installed on your system (''in Windows, Start > Program Files, find and click Adobe Reader to open''), click Help, click Check for Updates.
''If you go to the Adobe site to download the current Adobe Reader:''
-'''use Firefox to download''' and '''SAVE to your hard drive''' (save to Desktop for easy access)
~~red:-See the images at the bottom left of this post to see the steps to take on the Adobe site~~
-exit Firefox (File > Exit)
-In Windows: check to see that Firefox is completely closed (''Ctrl+Alt+Del, choose Task Manager, click Processes tab, if "firefox.exe" is on the list, right-click "firefox.exe" and choose End process, close the Task Manager window'')
-In Windows: double-click on the Adobe Reader installer you just downloaded to install/update Adobe Reader
*'''NOTE: On Vista and Windows 7''' you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
*'''NOTE for IE:''' Firefox and most other browsers use a Plugin. IE uses an ActiveX version. To install/update the IE ActiveX version, same instructions as above, except use IE to download the ActiveX installer. See: [[ActiveX]]
*Also see: http://kb.mozillazine.org/Adobe_Reader ~~red:'''''AND'''''~~ [[How do I edit options to add Adobe to the list of allowed sites]]

How to determine the JDK version required to use a jar?

Hi all.
I am using a hosted server that uses JDK 1.4.2 and I cannot upgrade the VM. I have been finding it extremely difficult to install web applications on this server since I find that after installing the app, the web server complains the bytecode used in the jar is newer than the VM can understand (or it complains that the app uses JEE servlet or JSP methods it cannot find).
To compound the problem, only about 25% of the sites I've visited that provide jars for download mention the minumum JDK version required to use them. (Some do not mention any system requirements at all besides 'requires Java and a Java application server').
Do any of you know of any tools that can analyze a jar and determine the bytecode version it uses?
(Another helpful tool would be one that can determine the minimum JEE APIs required to run a web app..., but that's probably wishful thinking :)).
Thanks for your help.
Michael N. Christoff

The major/minor version of the class file is the way to go.
Also, it's not necessary to write a separate program to get to those. javap prints them out when being passed the -v flag.
Note, however that "JDK version" is not a correct term, as I can create 1.4-compatible class files with a Java 6 JDK (by passing the -target flag to javac). Those won't look any different than .class files written with a 1.4 JDK.

HT4108 What is required to use the video composite out on the iPhone 4. Left and right audio works ok

What is required to use the video composite out on the iPhone 4 The left and right audio works ok

Please not that the iPhone uses mono channel for internal speakers, the other path that you see is not the speaker per say. It is the phone microphone. Try using headphones, you will hear both channels. If the problem still persists when using headphones, check your sound balancing in the settings. Go to setting-general-accessibility scroll down and check the slide under mono audio. It should be put at the centre for you to hear both channels ON YOUR HEADPHONES

An update is required to use Folio Builder. Please click here to download the Folio Producer tools.

Hello,
I'm using CS 5.5, Mac OS 10.8.4. I've spent the last two nights trying to figure this out but I am really stuck this time... I think the issue I'm having is similar to IDEAMAN1 but I got lost on his advice after trying some stuff out, so help would be greatly appreciated!! (I'm only medium-level tech savvy...)
Trying to create my first epublication. Downloaded FolioPanel v26 and installed it, then FolioProducerTools v27 and installed it. Realised I had stuffed it up so uninstalled both using the uninstaller. Re-downloaded FolioProducerTools v27, FoiioPanel v27 and installed in that order and popup said the updates were ready to go. Opened InDesign and folio builder panel said "An update is required to use Folio Builder. Please click here to download the Folio Producer tools.". The link brought me to http://www.adobe.com/support/downloads/product.jsp?product=172&platform=Macintosh which is where I downloaded the original files anyway.
So I've tried uninstalling, restarting the computer, trashed preferences, closed CS5.5ServiceManager, reinstalling heaps of times and not sure what I should try next. Please help!! Thanks!!!!

That notification is often a bug.
I get it regularly when I launch InDesing while connected to my Thunderbolt Display.
If I disconnect my Macbook from the Display, relaunch InDesign it works fine - reconnecting to Thunderbolt display after this also still allows the Folio Producer tools to load properly.

What is the basic requirement to use SIPServlet

Hello Friends,
I learnt SIPServlet through bea.com API documentation. I would like to develop a small application using SIPServlet, please tell me what is the basic requirements to use SIPServlet. How i can get the library for SIP Servlet. Is there any special software support need to execute SIP Servlet.
Pls let me know
Thanks in advance....
Regards,
Kayal

Hi BSB
I would like to know what is the basic requirement to learn EP (Development)?
You should aware of ERP and business processes to start learning EP.
Is Java required? If so, is it J2EE and which version of it?
Java knowledge like jsps,corejava...it will be good..If you know well,you can play with webdynpro java.
Also what else, apart from this I should know to become a successful consultant in EP (seen enough of ABAP
Webdynpro ABAP suits for you exactly for developing portal applications.
Koti Reddy

Is the AirPort (or Extreme) Required to Use the AirPort Express?

Hey. I went to my friend's house and he started telling me about his AirPort Express. I thought that was exactly what I needed! So I asked him "Is the AirPort or Time Capsule required to use it?" He said that he wasn't sure. So I deiced to go here to ask that question. So...

The airport express is one of the most unfriendly of Apples devices I've encountered in terms of setup and troubleshooting. If your son took it to College, he most likely reconfigured it while he was there (so it will no longer be configured for your home network).
I would suggest connecting you express to your extreme via the ethernet port (so connect a network cable between the two), you will then be able to see the express when you launch the airport configuration tool (Airport Utility) on your computer. From here you will be able to reconfigure the express to connect to your network again. At which point you can physically disconnect the express and resume wireless.
Essentially you need to start again from the beginning! Heres a guide which might help, let us know how you get on:
http://manuals.info.apple.com/en_US/AirPort_Express_Setup_Guide.pdf

HT1420 I am using my old iPhone for playlist for my Dad's funeral as that meets the crematorium requirements. Some tracks - uploaded from personal CDs to MacBook Pro and successfully transferred to new iPhone (with small doc) won't transfer on syncing. M

I am using my old iPhone for playlist for my Dad's funeral as that meets the crematorium requirements. Some tracks - uploaded from personal CDs to MacBook Pro and successfully transferred to new iPhone (with small doc) won't transfer on syncing. Most do, but why won't some, of my own music sync when others off the same album and in the same playlist do? I have now checked the storage, freed up 766MB, how can i not sync (and get everything i've just deleted back) but upload the required tunes? All help appreciated, many thanks x x x

OrcaMDDDS wrote:
Is this possible?
maybe this post by Zevoneer helps.
I don’t want to hear any of that “iTunes will let you re-download anything you’ve lost” nonsense.
it won't anyways. except or apps, you are entitled to one download only. there4 it is important to back up.
JGG

Installed 11 64 bit now get "The iPHone cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install the 64-bit version of iTunes."

Installed iTunes 11 64 bit now get "The iPhone cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install the 64-bit version of iTunes." Uninstalled and installed twice no help. windows 7 64 bit, iPhone 5 OS 5.1

Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

When connecting my iPhone I get the following message "The iPhone cannot be used because it requires iTunes version 10.1 or later. What does this mean? My computer has 10.4.

When connecting my iPhone I get the following message "The iPhone cannot be used because it requires iTunes version 10.1 or later. What does this mean? My computer has 10.4.

That's an issue with your system. Try removing the iTunes and the other APPLE software related from your system and reinstall it again.
Follow this if you're using XP: support.apple.com/kb/HT1925
Follow this if you're using VISTA/7: support.apple.com/kb/HT1923
Follow this if you are using a MAC 10.5.8 or later: support.apple.com/kb/HT1224

Is the fingerprint sensor a requirement to use on the iPhone 5S?

Similar Messages

Maybe you are looking for