Is the FIREWIRE DEAD!

I wish that I would have know that firewire would not work with the 5th gen. My iPod hard drive when bad 15 days after warranty expired. Now I cannot use the firewire cables for anything but charging.
Has anyone heard about why it will not work?
Are they going to develop a patch to have it work?
Is the firewire dead?

I just got the new 60GB video ipod as a gift. I am an owner of the FIRST gen. ipod, which seemed to work just fine with only firewire. I am seriously ******. How is it that the last 3 generations of the ipod were compatible with both firewire and USB, but now they decide to settle for the slower (though not much) connection? Saving $? Well, in the process they've alienated their loyal Mac users, such as myself. I have a G4 mirror tower running 10.2.8, so I have to go spend $35 on a USB 2.0 PCI card, and $120 upgrading to 10.4 so I can use the video function, all because Apple wants to sell more to Windows users. This really *****. I understand technological development, but it should at least be compatible with machines that are only 2 years old. What the **** else can I do?

Similar Messages

Why would the Firewire Port and/or External DVD-RW suddenly not work?

Hi, it's me again. I swear, I must be destined to just use Windows machines...
Anyways, I have a used/refurbished iBook G3 500MHz 320MB RAM Dual USB (1 Firewire)laptop running OS 10.2.8 that I bought a few months ago. I went and purchased an external Firewire/USB 2.0 DVD-RW drive as I only had a CD-ROM drive on my machine and I wanted the option to burn CD's or watch/read data from DVD's (I know that with my slow processor writing DVD's -other than data- would be a stretch and have other machines to do that with anyways so it wasn't a concern really). I received it and installed it, also installed the free version of Toast that came with it, and the drive worked fine. I have not needed to use the drive since then and have not used the laptop much at all since then really, but I do need to say that I did end up adding a new user account, though I can't remember if I changed the original Admin account and then still have the one I created myself when I first started the laptop after I bought it (had a fresh install of Jaguar on it, but I have no disk to re-install with if needed) or if I created a separate (new) account and ended up deleting the Original Admin accout (I know in Windows, you cannot delete the original Admin account but I do not know if that is the same for OSX or not). I did this as I wanted a master Admin account that I just wouldn't really use and then wanted the other as my main account (and use it to connect to my home windows network) and for some reason it would not let me put a check in the box to allow that account to do so (from either Apple or my user accounts) and so I know that my main user account now is set up to allow it (was it the old Apple user account or a new one, I can't remember- sorry).
Ok, so that is the back story to my problem, which happens to be this:
I just bought a new chip of RAM (512MB to make it a machine with 576MB RAM total) and as I had been looking at getting OSX Tiger (but didn't want to do it without the extra ram and had been considering Panther instead as well), I thought it was necessary if I wanted to not bog down my machine. I bought the Install Disks on DVD for Panther, as well as an upgrade disk (DVD again) for Tiger, therefore letting me use the External Firewire DVD-RW to install Panther, and if I liked I could go ahead and upgrade to Tiger (and if I didn't like it too much, or it slowed things down too much etc, then I could always go back to panther and have both available for future options). The extra RAM coming in handy here definitely.
So I was going to install the RAM today, and decided to go ahead and test out the External DVD to make sure it could boot from it (before making any changes to my system) and then go and install the RAM, and after that, install Panther to start... But I plugged all the cords and cables in, used my laptop with AC power even, and I could not get the External to show up at all... (kinda like the very current post right below mine but for the G4- it worked before, but now the firewire External just does not show up).
I only have USB 1.1 on this laptop obviously, and I don't even know if you could do a boot from an external with USB 2.0 if my laptop had it (the DVD player does). I was recommended to boot with an external firewire DVD or firewire to another machine with DVD capabilities to do the install. So my problem right now is getting slightly bigger, as of course, I can't seem to momentarily find the stuff that came with the External (spare USB cable to check and see if the laptop will recognize it at least with that and to show it is the firewire that is not working properly, or the disk that I used to install it -might have been only used to install Toast free version if it didn't need any drivers, but I don't know where that or the instructions for installation sheet currently is -- I am looking for it, but I have switched bedrooms just last week and I also seem to be missing a few other Windows laptop disks as well so there is a good chance that they are all together, I just need to figure out where, heh.)
I am waiting currently before installing the memory, though if I don't get the External working tonight, I may go ahead and do it first as at least I will have more memory on my laptop then, until I can get other stuff functioning and be able to do the Panther install.
But my main question is, is there something that would cause an installed external to suddenly not show up in OSX? Since I hadn't used it since that one day, and it was unplugged from the laptop itself, would that end up doing it, or more likely, the changing of the user accounts (though I have been trying to test it with different types of media and through both of my user account (which are both "admin" ones), though I do still have one of those being an account that was on there when the External DVD was first installed, so it really shouldn't have done this at all (one would think). So how big of a chance is it that the firewire has somehow gone dead and this is the main culprit to my wasting the past 4 hours on this???
I am currently scavenging around for an extra USB cable to try and test the External that way and will post the results when I can... I love the look and idea of macs, now I have a mac and want to upgrade it even, but why is it that whenever I attempt to use it after having not used it for a bit (and try to make the iBook feel better by using it more as I am sure it feels sad and alone sitting on the shelf while my Windows Laptop gets more attention), or try to fix it when it can be made better (and therefore used more often), the mac (all macs really), just seem to get all pissy and cause problems and make me spend hours upon hours trying to get things to work again??? You have to admit it, I am "mac cursed"... sigh I can program in 4 or 5 computer languages and am very advanced at many tech things (the ones I am not as good at I am still usually Average or Medium skilled) so it makes me wonder why I have so many tech problems with Macs when they are supposed to be the "easy" OS to use...

Actually, I think I have it all working now. After going back to the Plextor Website, I found out that the switch between the USB and 1394 ports only gets activated (switched over to the other) with you turn the device off first, move the switch and then turn it back on. I was sure that I had done this with the ibook, but maybe not as when I went back and did it with first the USB and then the Firewire cables, it did work. I definitely knew that I had not done this with the Windows laptop, the reason it would not have the USB work for me on it.
but back to the iBook, I was confused as it was only showing up as a DVD-ROM (which I guess is what they do until you actually open up the burning software to then be able to burn to it), and it also had the wrong Model #, which after more research, showed that it was the Internal DVD drive model version (PX-708A) compared to the actual model version (PX-708UF) which is the USB/Firewire (External) model. The firmware was really out of date as well (from June 2004 I think, v1.06) and they had v1.12 from Spet/Oct 2006 available so I went to get that (which was a hassle). They had nice easy Windows self extractor/installer packs, and then the BIN files for use for all systems (Sun OS/ Mac OSX/ Mac OS/ Linux etc as well as usable for Windows), and those needed a special Firmware Updater Application which was OS specific. Only I had the hardest time trying to get the OSX one as it would send me to a FTP site and not give me any clues as to which file(s) I needed to get and the Mac OS version was just for older 9.2 or below versions and didn't want to install under the OS Classic mode.
I ended up using my windows computer which made it easier to view with the FTP stuff as I have FireFTP in Firefox, and downloaded the files I thought I needed (to test out), and then realized my silliness, and just downloaded (as well) the Windows Auto Extractor/Installer as the Firmware is the same for all OS's, just the way to install/update it was different... So I hooked the DVD drive to my PC and updated the firmware, checked it out on here before moving it back to the ibook, where I checked that it still worked and had the new update version showing, which it did, and now I have my fully working and newly updated drive ready for the OSX installations... I had attempted to update my Jaguar system as well while online, but it had no new updates available (I guess those were all mostly Tiger updates that were just recently released).
I am now off to install my additional RAM, and after checking that it all shows up correctly, I will go ahead and do the Panther Install (and test it out and see if I like it or not).
For anyone that currently uses Panther on any mac, are there still any major problems I should know about before hand, or know about things that they have mostly fixed (like the issues with Firewire ports and External Drives that they had around the time Panther was first released for example)???
Thanks to all that helped... I now know to attempt an "eject" of any external HD (which I do have one that I will setup to use after I get Panther on the ibook) or CD/DVD drive instead of just unplugging the USB/Firewire cable.

FireWire dead after Leopard installation?

Hello all,
Just upgraded to 10.5.2 and my USB and FireWire ports went dead.
Reset PRAM, which brought back the USB ports.
But, My G-Drive Q is no longer mounted via the FireWire port (after restart of it and the Mac).
Disk Utility doesn't see it either.
"About This Mac-- More Info" shows "unknown device" connected to FireWire.
I see no other postings when searching this forum for "G-drive" or "GDrive".
The G-Technology forums don't have an answer either, as far as I can see, although others seem to have had FireWire/Leopard issues.
Any suggestions?
Thanks in advance.

Hi Bill
if you search under 'no firewire or missing firewire' you will find lots of people like ourselves who have had issue since installing leopard. I have just installed 10.5.3 on my G4 powerbook in the hope this update would now resolve the problem but it has not. I don't think anyone is listening on this subject and other ideas such as reset pram does not work, or at least has not for me regardless of how many times i have tried. the odd thing is I installed leopard to my G5 desk top with no issues....so if anyone out there has had the same problem with a powerbook and found the answer please let us know.
thanks

Firewire Dead

My Firewire port seems to be dead. I have tried all the typical trouble shooting such as different devices, cables, reboot, reload upgrade 10.5.5 combo and even trying a Belkin 4 port powered firewire hub and no —go. When I check the "About this Mac" for the firewire it reports:
FireWire Bus:
Maximum Speed: Up to 400 Mb/sec
...but no devices.
Is there a hardware check I could use to try and further trouble shoot this????
I need to get video off of my camera and edit it for a project ASAP. Any ideas for a work-a-round???
Thanks,
Larry

I just tried another firewire cable to an existing firewire drive. When I plugged it in I smelled smoke. You know...the electrical kind. The computer still works OK. My thought is there is something wrong with the power output in the firewire port that is toasting the cables.
Anyway, I am going to check with my boss. We have an older Mac Mini in a store room. I think if I hook it up to my Mac and download Video via ARA and ethernet hookup I will be fine. Anyone have a better way to get video off of a digital video camera without a direct firewire connection?
Thanks,
Larry

My thunderbolt to firewire adapter doesn't fit the firewire???

I bought the apple store "Thunderbolt to FireWire Adapter" today. I'm trying to put my old iMac in Target Mode and move old files. The firewire cord doesn't fit into it??? I'm sitting here feeling pretty stupid and stumped?

Your firewire cord is the wrong size. Apple's cord is 800 port. What size is your cord?

MacBook Pro to my iMac with the firewire it makes me enter the Key product code for Office:Mac2011

When I connect my MacBook Pro to my iMac with the firewire to use as a monitor it makes me enter the Key producy code for Office:Mac 2011 every time.
Then when I disconnect my MacBook I have to enter the product key again to use office on it???
Any ideas??

Post on the Office forums: http://answers.microsoft.com/en-us/mac

I am having difficult problems with the FocusritePro14 it works for a few then the firewire light flashes it cuts in an out then my MacBookPro crashes and restarts what can be the problem?

I am trying to figure out why this interface never works like it should, I have the lastest drivers 10.8 OS, The firewire cuts in an out and then crahses my computer, it was working fine for a good month, and then it does this. The people at Focusrite are clueless to what is going on. This is horrible engenerring on there part. There are three lights on the interface they all light up, then half way through a recording or just lisiting to music, the FW light flashes and cuts out, and now the mac is rebooting when it does that. I highly doubt it is a simple fix, or a bad wire. I have the original cable for the interface that came with it, hooked up to a sonet adapter to fit in the macbook pro because the geniuses at apple decided that they would make that port small.
Sorry about mispeling its 3 am here in Ohio. Please can someone help
Thank you

Hello Bagpus113
Check out the article below to troubleshooting issues with the sound for music and for videos. One other thing you can try is to convert the songs to a different format
iTunes and QuickTime for Windows: Audio does not play or plays incorrectly
http://support.apple.com/kb/TS1362
Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
http://support.apple.com/kb/ts1718
iTunes: How to convert a song to a different file format
http://support.apple.com/kb/ht1550
Regards,
-Norm G.

My MacBook Pro can't find the FireWire port

My MacBook Pro (OSX 10.6.8) can not find the FireWire port. Until now there hasn't been any problems using the FireWire, but now it just deny any knowledge of it, so to speak.
The audio device lights up when I connect it to the MBP (yes, I did connect it when in off-mode), so it seems to work in a way.
Does anyone recognize this problem and knows how to solve it?
/JohanLaMar

Have you tried following through the trouble shooting tips in this knowledge base article on Firewire?

Hello, I have a problem with my mac book pro after running the battery dead on a game. The display has shrunk leaving two black margins on either side. What to do ?

Hello, I have a problem with my mac book pro after running the battery dead on a game. The display has shrunk leaving two black margins on either side. What to do ?

Go to System Preferences>Displays and set the resolution to "Best for this computer" (or something to that effect).
Clinton

Is there a way to run a 2005 PreSonus Firebox(with the firewire) to a mid-2011 iMac 0SX 10.7.2? It says its no longer supporting Power PC? Anything I can do without spending more money on new equipment or a new computer? Please help me.

Is there a way to run a 2005 PreSonus Firebox(with the firewire) to a mid-2011 iMac 0SX 10.7.2? It says its no longer supporting Power PC? Anything I can do without spending more money on new equipment or a new computer? Please help me.

Nevermind, I got it working.
I ended up extracting the new vob within MPEG Streamclip, which gave me an m2v and an aiff audio. I multiplexed those two back together in FFMpegX which gave me a complete VIDEO_TS folder with BUP and IFO files I needed.

I have a MacBook Pro Mid 2012. I have a sony DCR-PC350E . How do i transfer the video to the laptop ? I have firewire cable. But not able to find the firewire port in the video camera.

Need help.

The DCR-350e is a miniDV camcorder. It has a FireWire port, but it's not on the camera itself, it's on the cradle (aka "Handycam Station") that should have come with your camcorder. You need to insert the camera into the cradle in order to capture video via FireWire.
Here's a link to the Owners Manual. See p. 142 for a diagram that shows the DV (iLink) port on the cradle.
You also need an appropriate cable to connect to your MacBook Pro. Check your MBP to see what port(s) it has:
Some 2012 MBPs have a FW800 port, in which case you need a 4-pin to 9-pin FW cable like this one.
Some 2012 MBPs only have a Thunderbolt port, in which case you need the Apple Thunderbolt-FireWire Adapter in addition to the FireWire cable.

Hi - my 2011 Mac Pro no longer recognizes devices in the usb ports, I've been told it's the logic board. is there a way I can connect the iomega external hard drive to it through the firewire or thunderbolt ports?

Hi - my 2011 Mac Pro no longer recognizes devices in the usb ports, I've been told it's the logic board. is there a way I can connect the iomega external hard drive to it through the firewire or thunderbolt ports?

jrburrows wrote:
Ok, fair enough. But since Job's death - Apple's control on leaks has been terrible. I got the new iPhone, and I like it - but it hasn't made nearly as big as an impression as previous ones. Because of the vast ammount of leaks. With the iPad mini leaks, it's 99% sure to come out next week.
Apple uses many manufacturers and it's massive also websites prefer to report on Apple whether true or false because it brings more hits.
Amd by "others" I meant other people on iPads - not other devices/manufacturers. It's possible to do so, I just want to know how. I honestly don't think we'll ever be in a Post-PC era until all tablets allow us to use USB in the way computers do.
No, USB is not the future, you missed the memo about cloud and wireless computing?

I previously downloaded The Walking Dead from iTunes to my iPhone. I deleted it to make space but now it no longer shows up on my purchased list on Apple TV. How do I get it back there? My iphone shows it is in the cloud.

How do I get a purchased show or movie to show up on Apple TV after I deleted or from my iphone? It is in the cloud on my phone but nowhere to be found on Apple TV.

Hello compugrrl998,
Thank you for the details of the issue you are experiencing with watching The Walking Dead on your Apple TV. I am sure you are eager to watch it on your television.
Have you tried checking specifically in Movies > Purchased or TV Shows > Purchased on the Apple TV?
Play previous purchases on Apple TV
You need Apple TV (2nd generation or later) to play content on Apple TV. Some features require the latest version of Apple TV software. If they're available in 1080p, you can play previously-purchased 720p HD TV shows and movies in 1080p.
Movies and TV shows
On the Apple TV main menu, choose Movies > Purchased or TV Shows > Purchased.
Select the item you want to view.
Choose Play.
Download past purchases
http://support.apple.com/kb/ht2519
If you are looking there and not seeing the episodes, I recommend verifying that you are signed in with the same Apple ID on the Apple TV that you are signed in with on your iPhone.
Thank you for using Apple Support Communities.
Best,
Sheila M.

HT3290 how to down load video from sonys dcr trv27 , I hooked up the firewire , also tried connectinf usb at this same time my 2011 Mac doesnt seem to acknowlwdge me hooking up my camcorder , Help !!! stuck

I need help my Sony DVR TRV27 is hooked up to 2011 Mac w Firewire and in addition I also tried USB , I get no response !!! Iphoto , Movie maker I would like to download video to Mac and also be able to do a quick burn on a disk from the cam ! THXS

Hi
A. MUST be via FireWire - Nothing else will work
B. To just get material over to a Playable DVD - Then Use iDVD and Magic iDVD or OneStep DVD function
Else read on
NO CAMERA or A/D-box
Cable
• Are You sure that You are using the FireWire Cable - USB-Cable will not work for miniDV tape Cameras
FireWire - Sure not using the accompany USB-Cable but bought a 4-pin to 6-pin (or 9-pin) FW one ?
• Test another FW-Cable very often the problem maker.
Camera
• Test Your Camera on another Mac so that DV-in still works OK
• Toggle in iMovie pref. Play-back via Camera (on <-> off some times)
• Some Cameras has a Menu where You must select DV-out to get it to work
• Camera connected to "charger" (mains adaptor) - not just on battery
• Camera set in Playback mode - NOT Recording mode
Does Your Camera work on another Mac ?
Sorry to say it is to easy to turn the 6-pin end of the FW-cable 180 deg wrong.
This is lethal to the A/D-chip in the Camera = needs an expensive repair.
(Hard to find out - else than import/export to another Mac ceased to work
everything else is OK e.g. recording and playback to TV)
A/D-box
• Is the dip-switches set right ?
• Set to same standard as recorded/editing e.g. NTSC 29.97fps or PAL 25fps
• Try resetting it
Connections
• Daisy Chaining most often doesn’t work (some unique cases - it’s the only way that work (some Canon Cameras ?))
Try to avoid connecting Camera <--> external HD <--> Mac but import directly to the Mac then move
the Movie project to dedicated external hard disk.
• FireWire-port - Can be re-setted by - Turn off Mac and disconnecting Mac from Mains/Power for 20-30 minutes
External device’s (hard disk’s)
• Should be FireWire as USB/USB2 performs badly and so does Airport or Net-work connected ones too.
• MUST BE - Mac OS Extended formatted - UNIX/DOS/FAT32/Mac OS Exchange - DO NOT WORK for video due to 4Gb barrier.
Mac
• Free space on internal (start-up) hard disk ? Please specify the amount of free space.
(Other hard disks don't count)
I go for a minimum of 25Gb free space for 4x3 SD Video - and my guess is 5 times more for 16x9 HD ones
after material is imported and edited. No Camera or A/D-box
• GarageBands fix - Close iMovie, Open GarageBand, Play some notes, Close GB and iMove can now be OK
• Does Your Mac have a FireWire Port
• White MacBooks - don't
• MacBook-Air - don't
if not then a few Mac’s has a PCM-CIA slot and there are FW-Cards that makes a FW-port this way
else - NO SOLUTION
Only option as I get it is either
• Use another Mac to Capture material (to an external USB2 - Mac OS Extended formatted hard disk - or -
• Change to another Camera that can be used with Your Mac (no there are no miniDV tape Cameras that can)
• If Your Mac-Book has a PCM-CIA Card place - then there are FW-port-Cards and then
You can import via this - but I've not seen this on more modern Macs. My PowerBook G4
has one and this FW-Card-port works greatly.
SoftWare
• Delete iMovie pref. file may help sometimes. I rather start a new account, log into this and have a re-try.
• Any strange Plug-ins into QuickTime as Perian etc ? Remove and try again.
• FileVault is off ? (hopefully)
• Screen Saver - OFF
• Energy Saver - OFF
Using WHAT versions ? .
• Mac OS - X.5.4 ?
• QuickTime version ? (This is the heart in both iMovie and FinalCut)
• iMovie’08 (7.1.?), 09 or 11 ?
• iMovie HD 6 (6.0.4/3) ?
Other ways to import Your miniDV tape
• Use another Camera. There where tape play-back stations from SONY
but they costed about 2-4 times a normal miniDV Camera.
• If Your Camera works on another Mac. Make an iMovie movie project here and move it
over to Your Mac via an external hard disk.
(HAS TO BE Mac OS Extended formatted - USB/DOS/FAT32/Mac OS Exchange WILL NOT DO)
(Should be a FireWire one - USB/USB2 performs badly)
from LKN 1935.
Hi Bengt W, I tried it all, but nothing worked. Your answer has been helpful insofar as all the different trials led to the conclusion that there was something wrong with my iMovie software. I therefore threw everything away and reinstalled iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos) to my Sony camcorders worked properly as it did before. Thank you. LKN 1935
from Karsten.
in addition to Bengt's excellent '9 yards of advice' ..
camera set to 'Play' , not rec/computer/etc.?
camera not on battery, but power-line?
did your Mac 'recognize' this camera before...?
a technical check.
connect camera, on, playback, fw-connected...
click on the Blue Apple, upper left of your screen ..
choose 'About . . / More . .
under Firewire.. what do you read . . ?
More
• FileVault - Secure that it’s turned off
• Network storage - DOESN’T WORK
• Where did You store/capture/import Your project ?
External USB hard disk = Bad Choice / FireWire = Good
If so it has to be Mac OS Extended formatted
----> UNIX/DOS/FAT32/Mac OS Exchange is NOT Working for VIDEO !
mbolander
Thanks for all your suggestions. What I learned is that I had a software problem. I had something called "Nikon Transfer" on my Mac that was recognizing my Canon camcorder as a still camera and was preventing iMovie from working properly. After un-installing Nikon Transfer and doing a reboot, everything worked great.
I never liked the Nikon Transfer software anyway--I guess I'll get a cheap card reader and use that to transfer photos in the future.
No Camera or bad import
• USB hard disk
• Network storage
• File Vault is on
jiggaman15dg wrote
if you have adobe cs3 or 4 and have the adobe bridge on close that
or no firewire will work
see if that helps
DJ1249 wrote
The problem was the external backup hard drive that is connected, you need to disconnect the external drive before the mac can see the video camera.
MaryBoog wrote
Maybe your problems is solved in the meantime, but for all others this might help as I had the same problem, also have the Sony HDR-HC7, but the 7e (Europe, PAL). I found this link today and it works perfectly
//support.sony-europe.com/tutorials/dime/videotransfer/vtransfer.aspx site=odw_en_GB&sec=DVH&m=HDR-HC7E
What I exactly did.- put camera in play mode - open guide - choose connection guide - choose comp./printer (where to transfer movie to) - select connection.- i-link (on my camera) but equal to firewire - OK - choose HDV - choose NO for conversion of i.link.
Settings are shown then (VCR HDV/DV.- HDV and i.link-conv..- OFF), press OK, OK, END.
Switch camera off. Connect firewire cable to camera & Mac. Switch camera on, in play/edit mode.
Open i-movie, choose import from camera. On screen below the camera connection is shown.- DV (HDV). Now you can import, automatically or manually.
This worked perfectly for me. Took me 2 days to find out. Could not find any clear thread explaining what I had to do on the camera and the manual was not clear either.
Yours Bengt W

Imac G5 won't start with Isight plugged into the firewire port.

I went to turn on my Imac today and it wouldn't start. After checking all the usual culprits (power strip, outlet and power chord) which were not the problem, I proceeded by unplugging all the external devices from the back ports. After unplugging the computer for a few seconds and plugging it back in (which I read resets any power issues), it turned back on. I plugged my Isight camera back in and turned it on and the computer suddenly shut off. I reproduced this quite a few times and it did the same thing. It won't even turn on if any device is plugged into the firewire port. Does anyone have a clue of what this conflict could be or experienced anything similar.
I would greatly appreciate any input.
Thanks in advance,
Daniel

Welcome to Discussions - try resetting your PRAM, if that doesn't work, I'm afraid there is something wrong with your logic board, where the firewire bus is located. The best thing to do would be to take it in for servicing.

Is the FIREWIRE DEAD!

Similar Messages

Maybe you are looking for