Is the Forms & Reports Developer Standalone supported on Windows 7 ?
Is the Forms & Reports Developer Standalone supported on Windows 7 ?
848478 wrote:
Is the Forms & Reports Developer Standalone supported on Windows 7 ?Developer 10g/11g is supported on Windows 7 (32-bit).
Is Oracle Developer 10g certified with Windows 7 and IE-8 ?
Re: Is Oracle Developer 10g certified with Windows 7 and IE-8 ?
Thanks,
Hussein
Similar Messages
-
Hi everyone
I have installed Forms & Reports Services Standalone 10.1.2.0.2 in a Solaris 10, it is possible install in this sqlloder utility?
I need sqlloader access from a form by a 'host' command, is that possible?
I try this command from the form:
HOST ('sqlldr user/pass@servicedb control=/home/oracle/controlfile.ctl');
but it didn't work... is there other way?
Thanks.You can easily create new report servers on a machine. However, to run several reports in parallel you do not need extra servers. You should configure your existing server with extra engines. This can easily be done by changing the maxEngine attribute of the engine section (engine with id=rwEng) in <reportserver>.conf file. You can also manipulate these values through Application server Control. Change the value to 2 and you can run two reports at the same time. depending on available memory you might consider a value of 4 or 8 as well.
-
Oracle 6i forms/reports developer client software
hi all,
i want the clinet software for oracle 6i forms/reports developer which is only installed on the client system..
plz tell me the website/address from where i can download it...
thanx in advance,
Regards,
shahzad[http://www.oracle.com/technology/software/products/forms/index.html]
-
Automate the database and forms / reports services to start on windows 2008 server R2 startup
Dear memebers,
I want to automate the database and forms / reports services to start on windows 2008 server R2 startup. whats the possibilities and which method is the best?
Regards:Hi,
type services.msc at run
then check for Oracle Services--> Right Click-->Properties-->Startup type-->start automatic
HTH -
How to install database 10g and forms&reports developer 10g?
hi
how to install database 10g and forms & reports developer 10g on windows xp 32 bit? and which one is to install first? how to connect them together? where can i find complete guideGul wrote:
hi
how to install database 10g and forms & reports developer 10g on windows xp 32 bit? and which one is to install first? how to connect them together? where can i find complete guideThis link will help you http://tahiti.oracle.com/ -
Where to download the form 9i developer offline help?
Where to download the form 9i developer offline help in PDF or HTML format? I can easily get the online help on Oraccle website, I'd like the offline help.
Regards!
GeraldHey Francois,
Thanks for your response. You almost helped.
I'd like the offline help documention like with the following url:
http://www.oracle.com/forms/10g/help/
Or just like Developer 6i, after the installation completed, the Form Builder 6i Developer Guide is installed in local machine at the same time.
where can I find the docs on Form 9i like 6i?
Regards!
Gerald -
Dear All Precious Friends,
I am having problem while installing Oracle Portal Forms Reports and Discoverer 11g on Windows Server 2008 64 bit,
I have already installed Oracle Database 11g Release 2 -------
----Then i configured JAVA Access bridge
--------then installed and configured Required Schema using Repository Creation Utility of same version of Database 11g,
-----------then installed Oracle Business Intelligence 11g version 11.1.1.6.0 which includes Web logic..............I am feeling that i did right at this point...........
..............also feeling comfortable after install Oracle Identity and Access Management 11g ..................
-----------------but don't know how to configure OID to install Oracle Portal Forms Reports and Discoverer 11g...............
Please help my Oracle Friends
Your early help will be highly appreciated.
thanks and regards
HassanYou said, "...+I would like to install Release 2(11.1.1.2.0)+ ...". Be careful. 11.1.1.2.0 is not Release 2. The version for Rel 2 is 11.1.2.0, notice that there is one less "1". Also, there is no way to patch from Release 1 to Release 2.
In EDelivery, this is what you should find if you search on "Oracle Fusion Middleware" for "Microsoft Windows x64 (64-bit)":
First look for this link then drill into it:
Oracle Fusion Middleware 11g Media Pack for Microsoft Windows x64 (64-bit)
In this section you will find the following:
This is the full product installation of FMw 11 Release 2 (Forms & Reports)
Oracle Forms and Reports 11g R2 (11.1.2.0.0) for Microsoft Windows x64 (64-bit) V28761-01
This is the full product installation of FMw 11 Release 1 (includes Portal, Forms, Reports, and Disco)
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 1 of 4) V18785-01
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 2 of 4)
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 3 of 4)
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 4 of 4)
This is the FMw 11 Release 1 patch set that will bring the above 11.1.1.2.0 installation to 11.1.1.6. This is NOT a full product installation - just a patch
Oracle Portal, Forms, Reports and Discoverer 11g Patch Set 5 (11.1.1.6.0) for Microsoft Windows x86 (64-bit) V29850-01
There are no patch sets for Release 2 as of yet. -
Forms/Reports Chinese character support
We have an existing db (10.2.0.4.0) and forms (11.1.2.1.0) application, that we're trying to extend to support Chinese characters.
We're looking to add some unicode (nvarchar2) columns to existing tables, rather than converting the whole db charset.
I've pasted my environment settings below. What I've found so far in trying to create a local (ie. running the form in Builder with local weblogic running) test form, is that I can insert the chars ok (using plsql developer) and the test form can display them correctly, but cannot write them back to the database. They appear as upside down question marks in any records the form has created.
Env variables:
NLS_LANG = .UTF8
Database:
NLS_CHARACTERSET = WE8MSWIN1252
NLS_NCHAR_CHARACTERSET = AL16UTF16
1) So, can anyone give me any pointers on how to get the form to write the characters back into the database correctly?
2) The chinese chars will only be relevant to a few forms inside the app, are there any settings local to the form that will enable unicode support, rather than setting at OS level. ie, an alter session, or equivalent?
3) Oracle Reprts doesn't appear to have an nchar datatype unlike Forms, is there anyway to get Reports (generating PDFs), to include Chinese, or is it not possible?
thanks in advance, please let me know if you need any more info.
**EDIT**
I now have the chars writing back to the db ok. If you do it via an INSERT statement from inside the form, it doesn't work. It appears the value is sent to the db in the normal charset rather than the national charset, and it's written as a question mark. If you pass the value from the form into a back end stored proc though (which does the insert) it works okay.I have not worked with Forms for a long time. Are use sure they actually support the NVARCHAR2 data type? My memory tells me that they do not.
I recommend migrating the database to AL32UTF8. You can support NVARCHAR2 in Forms using workarounds with stored procedures to move data as you described (you should be able to do this while reading as well.) but NVARCHAR2 data type is discouraged as it is not necessarily supported by all database features. For example, you cannot built an Oracle Text index on an NVARCHAR2 column. I am also not surprised that Reports cannot support NVARCHAR2.
-- Sergiusz -
SSL and 10gAS Form/Reports Services standalone
Successfully installed 10g Forms and Reports Services standalone (without Infrastructure). Successfully created a new Reports Service and it has been running OK (with some bugs crashing/restarting reports occasionally, inconsistent web-based information, inconsistent logs). Next step is to get certificate for this SSL working. Note 250532.1 does not help our environment since we don't use Infrastructure. Even tried to use the Command C:\OraHome1\jdk\bin\keytool to begin with certificate but it just does not work. Oracle tech support told me SSL is not yet for standalone FR Services.
I'd like to know if anyone has other suggestion/experience about configuring SSL on a standalone FR Services to make https working.
Thanks.Here you go. Here is how to make a 9.0.4 Forms and Report Services only install SSL enabled.
1. Open Enterprise Manager.
2. Disable Web Cache component.
2a. optionally stop Enterprise Manager service to save resources.
3. Edit httpd.conf file.
3a. On line before ClearModuleList, add this:
LoadModule ossl_module modules/ApacheModuleOSSL.DLL
3b. Now after the last AddModule which is just before "<IfDefine SSL>", add this line:
AddModule mod_ossl.c
3c. Make sure you have these two lines:
Listen 80
Listen 443
If you have something else like Listen 7777, you can remove these.
3d. Now add these lines just before "SetEnv PERL5LIB":
<IfModule mod_ossl.c>
AddType application/x-x509-ca-cert .crt
AddType application/x-pkcs7-crl .crl
SSLPassPhraseDialog builtin
SSLSessionCache shmcb:logs\ssl_scache(512000)
SSLSessionCacheTimeout 300
SSLMutex sem
SSLLog logs\ssl_engine_log
SSLLogLevel warn
<VirtualHost default:443>
DocumentRoot C:\orahome1\Apache\Apache\htdocs
ServerName server.yourdomain.com
ServerAdmin [email protected]
ErrorLog logs/error_log
TransferLog "logs/access_log"
Port 443
SSLEngine on
SSLCipherSuite SSL_RSA_WITH_RC4_128_MD5:SSL_RSA_WITH_RC4_128_SHA:SSL_RSA_WITH_3DES_EDE_CBC_SHA:SSL_RSA_WITH_DES_CBC_SHA:SSL_RSA_EXPORT_WITH_RC4_40_MD5:SSL_RSA_EXPORT_WITH_DES40_CBC_SHA
SSLWallet file:C:\OraHome1\Apache\Apache\conf\ssl.wlt\default
<Files ~ "\.(cgi|shtml)$">
SSLOptions +StdEnvVars
</Files>
<Directory cgi-bin>
SSLOptions +StdEnvVars
</Directory>
SetEnvIf User-Agent ".*MSIE.*" nokeepalive ssl-unclean-shutdown
CustomLog logs/ssl_request_log "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"
</VirtualHost>
Listen 443
</IfModule>
As you can tell, this is on a Windows server so you'll need to change the location of the default wallet to the correct directory. On Windows, a default wallet with a cert is provided.
Save the httpd.conf file and restart the HTTP_Server. HTTP and HTTPS now works. HTTPS should prompt you that the cert doesn't match but it is listening.
Get your wallet configured now and install it. Restart HTTP_Server and you are done.
That SSL section was borrowed from a test install of 9.0.2.3 that had all of that included. I'm sure you could do the same by borrowing from a full install of 9.0.4.
Now you could use WebCache which is pretty straight forward. Look on Metalink if you don't want to turn off WebCache on how to configure a wallet with it. I prefer to use Apache SSL but that is just me. :) -
Fusion Middleware - Installing Forms & Reports Developer in separate server
Hi,
I installed Forms & Reports Server (without developer tools) on one server. Now I want to install only Forms and Reports developer in another server. Can anybody tell me how to achieve this or from where I can get some reference document particularly for this task?you could set the working directory of your formsweb.cfg entry to another path;
e.g.:
[test_config]
workingDirectory=d:\devworkspace\forms
where d:\devworkspace\forms is the directory where your fmx/plx/mmx are located
if you have also own .jar files in use, you could also put them into another directory, and access them in the formsweb.cfg via an aliasmatch:
archive=frmall.jar,../my_aliasmatch/my_jar_file1.jar,../my_aliasmatch/my_jar_file2.jar
and in the httpd.conf (OAS_HOME/Apache/Apache/conf/httpd.conf)
add a line like this:
AliasMatch ^/forms/my_aliasmatch/(..*) "d:\devworkspace\java/$1"
where d:\devworkspace\java is the directory where your jar files are located.
and restart Apache.
for productional use you can also create a different config with a different workdir and a different aliasmatch.
the reports can also be located anywhere; just set the workdir and cachedir of your testreportsserver to a location where your reports are located.
regards
Christian -
Looking for Legacy Forms & Reports Developer 6/6i
Is there an link to download these older tools? I need to maintain an older client/server application and the CDs for these tools are missing.
Thanks,
MikeHi,
Oracle Developer (Forms/Reports) 6i can be found at:
Oracle9iAS Forms Services and Oracle Forms Developer 6i Release 2
http://www.oracle.com/technology/software/products/forms/htdocs/winsoft.html
Regards,
Hussein -
Where to start for becoming a Forms&Reports developer????
Hello
I am new to Oracle and just finished tutorial that comes with db 10g xe.
I want to become a forms&reports&design developer but I don't know where to start as in Oracle website there are so many tools,etc.
Please any of you help me to put me in starting point otherwise it will be time consuming not knowing where to start.
one of the guy made a comment saying:
Oracle Forms and Reports is a bit 'old' now, and Oracle seems to be moving more towards web development with Application Express (APEX) (This comes with Oracle XE as standard). There is web development done in Forms and Reports but it looks like Oracle are moving away from these in favour of APEX.
Do you think it 's worth to pursue with oracle forms,report??
I don't want to learn something that is or soon will be out off market or absolete.
But even with APEX which tool should i start to learn \ use to become forms&reports,design developer??
Which is the best way to pursue in development sense for forms,...??
Please help me to find my starting point for that secific developement.
Please copy\past all the URL to start with.Hi Sasi,
Please refer to CR100 base customising guide which is a starter for a CRM functional person.
You can also refer to the http://help.sap.com/saphelp_crm70/helpdata/en/19/68a028d02b460fa899066d948ed3ab/frameset.htm
link for more details.
I hope this helps.
Regards
Yogesh Kathe -
Question about the role Reporting Developer
Hi Experts,
I created a role for reporting developer. With this role a user can create queries without problem. But I faced an error when I tried to attach the map.
The error messages are:
"System error when downloading shape files from BDS."
"Data connection for map "cntry200" could not be established."
"Query can not be displayed on a map."
another question is, what does authorization object Broadcast Settings mean? It would be more helpfull with examples.
Thanks a lot!
ZiyangHi,
With your help I've got the authorization object Broadcast Settings. Thank you very much!
In transaction RRMX l get this message.
For instance, now I am working as a reporting developer or a reporting user.
step 1: run RRMX Analyzer
step 2: open a query
step 3: now I want to attach a map into the report. Layout -> attach map
And then I get this message.
However, it is no problem when I run Layout -> attach chart.
Thanks -
Do the "Pre-built Developer VMs" work on Windows 7 Home 64-bit OS
Hello,
Do the "Pre-built Developer VMs" work on the laptops with Windows 7 Home premium 64-bit Operating System?
Thanks
MohanrajYes, Aman you are right. As I guessed it worked. I was not sure that the Oracle Virtual Box will work on Home Premium 64-Bit because the download page did not say anything about which flavor of 64-Bit OS is supported. However, I downloaded and installed ("Oracle Virtual Box and Pre-built Developer VMs"). Afterwards, I tested a few items, so far looks good.
Thanks for your response.
Mohanraj -
after uninstall and reinstall the itunes 10.5, my iphone 4 still cannot connect and use in itunes 10.5.
Pc can retrieve pic in iphone but cannot access in itune 10.5.
i have tried the step posted in apple support.
please help~A bit more...
iPhone4 connects with the cable, I can sync, update, etc... just no wifi/BT/USB data...
Maybe you are looking for
-
Working on creation of PO using smartforms
Dear experts, let me know at present in am working on ECC 6 version of SAP.when inserting the text under display order.And when checked in OUTPUT OPTIONS, i am unable to find the sub heading OUTPUT TABLE. which is actually present in the tutorial. Ho
-
Hi all, since upgrading to Firefox 25 each time I boot Firefox I see briefly the following in a small window whilst it is opening. "Reverted change ..... on general useragent override." What does this mean and if it is a problem how is it rectified?
-
HELP ME: PROBLEMS WITH ORGANIZER...
My editing workspaces are working just fine, however, my organizer will not open (keeps saying "not responding"). If I reinstall the program, will I lose the pictures that are in the organizer that I haven't saved to my comp yet?
-
Photosmart 7150 -- FINALLY got it to work in Windows 7 Home Premium (64Bit) And THAT was way more of a struggle than it should have been! I realize the HP "toolbox" is too ancient to even open in Win7 (it was from Windows 98, no?) but there has to
-
R&R 4.0 Bootable DVD + Network Recovery from other Subnet
Hi everyone, we upgraded quite recently a bunch of workstations in the office to brand spanking new Lenovo ThinkCentre A62 machines. They are running great so far, very little to complain about. Anyway, some software which came along were Rescue & R