Is the geforce 6800 gt or ultra compatible with g5 june 2004?

is the geforce 6800 gt or ultra compatible with g5 june 2004?
if so which i think it is (just need to check) wheres the cheapest place/website i can buy it from in the uk?

wheres the cheapest place/website i can buy it from in the uk?
eBay.co.UK from this proven and reliable seller:
OEM Geforce 6800 Ultra (best if you want two, big monitors)
Flashed, Mac compatible Geforce 6800 GT (a performance value)

Similar Messages

Is the geforce 6800 ultra ddr3 same as the ddr and will the ddr3 fit my dual powermac G5 june 2004?

i want to get this video card but there is a ddr and a ddr3 whats the difference and will it fit my power mac dual cpu june 2004??

The Apple OEM versions are GDDR3 memory for the GT DDL and the Ultra DDL.
Both run 16 pipelines and both use the NV4x GPU clocked at 350MHz and 400MHz respectively..
Total bandwidth runs in the favor of the Ultra DDL:
Geforce 6800 GT 32GB/s
Geforce 6800 Ultra DDL 35.2GB/s
However, benchmarks show the performance of the two cards to be very close:
http://www.barefeats.com/radx800.html
The PC versions of the GT and Ultra use the same GPU, GDDR3 memory and same clock speeds, except in the case of OC variants.
The Memory clocks of the GT and Ultras (OEM or PC) are 500 MHz (1000 MHz) and 550 MHz (1100 MHz).
Performance of the PC version is the same as the OEM equivalent, only port configuration and card width being major differences (PC cards are typically single slot, while OEM are dual slot. This is a negative if one has many PCI/PCI-X cards).
Of course there are cooler variations, but all use either a single or a dual slot Cooler Master cooler.
Both OEM Geforce 6800 GT and Ultra cards will fit in and work in any AGP G5 (yours) with only OS X Panther 10.3.6 or later being needed (Tiger sam an improvement in Geforce drivers).
Of the flashed GT and Ultra cards, the same is true of the OEM- either can be used in any AGP G5.

Is the latest 280.26 nvidia driver compatible with MacBook Pro 6,2 model?

Is the latest nvidia driver (280.26) compatible with MacBook Pro 6,2 model)? Boot Camp 4.0 comes with the 262.41 nvidia driver, but I'd like to upgrade to the latest 280.26. The official 280.26 driver page on the nvidia site says that GeForce GT 330M is compatible, but in the footnote is written this thing:
Notebooks supporting Hybrid Power technology with Intel chipsets are not supported by this release
Do you think this is the case of MacBook Pro 6,2 model? Can I upgrade the driver without any problem?
P.S.
I've the nvidia geforce gt 330m 256 MB.

Mac OS X 10.8.2.
(77868)

I installed a new printer and now Photoshop Elements tells me I can't print. The error message is "The saved printer information is not compatible with this version of Photoshop Elements, or the saved printer is no longer available. You will need to che

I installed a new printer and now Photoshop Elements tells me I can't print. The error message is "The saved printer information is not compatible with this version of Photoshop Elements, or the saved printer is no longer available. You will need to check your printer settings before printing." I have uninstalled and re-installed Photoshop Elements, checked my printer settings and still I can't print a photo.

Hi ,
Please update to PSE 13.1
13.1 has solved this problem.
Refer to this link.
Photoshop Elements Help | Printer errors with Photoshop Elements 13

What are the SQL server versions those are compatible with XI 3.0.

Hi All,
Please suggest,
what are the SQL server versions those are compatible with XI 3.0.
or with which SQL server versions XI 3.0 will interact using JDBC Adapter.

Check in the [Product Availability Matrix |https://websmp201.sap-ag.de/~form/handler?_APP=00200682500000001303&_EVENT=DISP_NEW&00200682500000002804=01200314690900000192]in market place for more information on this
Thanks
SaNv...

Error on Data Flow Task MSSQL 2012 Clustered "Description: The version of Lookup is not compatible with this version of the DataFlow. "

We have an SSIS package that runs on clustered MSSQL 2012 Enterprise Nodes that is failing. We use a job to executer the package.
Environmental information:
Product - Microsoft SQL Server Enterprise: Core-based Licensing (64-bit)
Operating System - Microsoft Windows NT 6.1 (7601)
Patform - NT x64
Version - MSSQL Version 11.0.3349.0
Package is set to 32 -bit. All permissions verified. Runs in lower environments, same MSSQL version. All environments are clustered. In the failing environment, all nodes are at the same service pack. I have not verified if all
nodes in the failing environment have SSIS installed. Data access is installed. We have other simpler packages that run in this environment, just not this one. Time to ask the community for help!
Error:
Source: Data Flow Task - Data Flow Task (SSIS.Pipeline) Description: The version of Lookup is not compatible with this version of the DataFlow. End Error Error: Code: 0xC0048020
Description: Component "Conditional Split, clsid {7F88F654-4E20-4D14-84F4-AF9C925D3087}" could not be created and returned error code 0x80070005 "Access is denied.". Make sure that the component is registered correctly. End Error
Description: The component is missing, not registered, not upgradeable, or missing required interfaces. The contact information for this component is "Conditional Split;Microsoft Corporation; Microsoft SQL Server; (C) Microsoft Corporation; All Rights
Reserved; http://www.microsoft.com/sql/support;0". End Error
(Left out shop specific information. This is the first error in the errors returns by the job history for this package. )
Thanks in advance.

Hi DeveloperMax,
According to your description, the error occurs when you execute the package with Agent job on clustered MSSQL 2012 Enterprise Nodes.
As per my understanding, I think this issue can be caused by you use SQL Server Agent to schedule a SQL Server Integration Services package in a 64-bit environment. And the SSIS package is referencing some 32-Bit DLL or 32-Bit drivers which are available
only in 32-bit versions, so the job failed.
To fix this issue, we should use the 32-bit version of the DTExec.exe utility to schedule the 64-bit SQL Server Agent to run a package. To run a package in 32-bit mode from a 64-bit version of SQL Server Agent, we can go to the Job Step dialog box, then
select “32 bit runtime” in the Advanced tab.
Besides, we should make sure that SQL Server Integration Services is installed on the failing environment.
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

The saved printer information is not compatible with this version of Photoshop

Hello,
I hope somebody can help us. I am a IT Technician in a school, we have approx 500 Windows 7 64bit machines with about 600/700 users - 200 machines have the CS5.5 Master Collection installed on them. We have an intermittent issue with printing from Photoshop (both the 32bit and 64bit versions). Our printers are mostly HP LaserJet printers (all modern), but we have an Epson B-510DN Inkjet and some Xerox copiers too. The drivers are all installed on a central print server running Server 2008 R2 and shared via Group Policy to client machines.
In rooms where Photoshop is installed, intermittently when a student goes to print we will recieve the following error:
The saved printer information is not compatible with this version of Photoshop, or the saved printer is no longer available. You will need to check your printer settings before printing.
Photoshop will then grey out the 'Print' button and won't let the user print again. The odd thing is that we can still print from other software such as Microsoft Word or even non Microsoft software - even Illustrator will print. It just seems to be Photoshop thats has any issues.
This happens when printing to any printer on site, 90% of which are HP's. As a general rule we configure all of our HP printers with HP's PCL6 Universal Print Driver as it makes management of various printer models easy, and we haven't found it to limit us atall yet. We are aware the Adobe software is 'preferential' to Postscript drivers but our printers arn't, being HP's PCL is their native language. We have tried changing a printer to the Postscript UPD driver to test it but it made no improvement. We have also seen the issue quite indepth with our Epson B-510DN which is configured with Epson's latest model specific driver as our photography department use it. Since we are seeing it with different printers I don't believe the printer drivers are to blame - unless somebody want's to prove me wrong.
Like I say the problem is intermittent, and we are having trouble tracing it down to a user, computer or a software problem as it is so intermittent. Has anybody else seen this and managed to overcome it? Since it's only happening in Photoshop is it a bug that Adobe have recognosed and fixed in CS6? The only workaround we have found for it is to go into printers, chnage the defualt printer from one to another and back again - this seems to shut Photoshop up.
Thanks, Dave.

Chris,
Apologies for my slow reply - we have been busy here the past few weeks.
We are using a standard Microsoft provided JPG image (Tulips.jpg) so we have ruled out it being an issue with the image; perhaps if we were using a PSD, maybe so.
We have now found out what the issue is, and what the workaround for this bug is. All of our printers across our site are named in a specific format, usually [Location name] [Room number] [Mono or Colour] resulting in printer names such as Photography A11 Colour, Art A2B Colour and Design Technology A14 Colour. All of these names contain numbers. We have tried reimaging machines, reinstalling Photoshop, upgrading to CS6, deleting and reconfiguring printers with the same name. Finally the only solution that worked was to take the numbers out of the name, either by renaming or deleting and reconfiguring the printers. The Photography printer is an Epson B-510DN using a model specific driver and the other two use the HP PCL6 UPD driver, so I don't believe the drivers are to blame and since renaming the printers work I don't believe it's a configuration issue either. Remember that these printers are shared from a print server and deployed via Group Policy (using the Print Management method).
I hope this provides you Chris, and others searching Google, a useful explanation of the problem and what the fix is. As much as Adobe won't admit it's a problem/bug, I and many others across the internet believe that it is and that it should be fixed in future versions of Photoshop.
Thanks, Dave.

I am syncing my ipod but it comes up with a error saying itunes could not backup the ipod because the backup was corrupt or not compatible with the ipod, what do i do?

i am syncing my ipod but it comes up with a error saying itunes could not backup the ipod because the backup was corrupt or not compatible with the ipod, what do i do?

As I said the iTunes program on the computer. You open iTunes on the computer and go to the View menue in the upper rightand then click on preferences. Go to Devices and delete the backup.

I recently upgraded to Yosemite. Yesterday when I opened up the iPhoto (which I have it in my external drive due to the size of file) I get the message that it is not compatible with the new system(or something like that) and ask me to upgrade so I d

I recently upgraded to Yosemite. Yesterday when I opened up the iPhoto (which I have it in my external drive due to the size of file) I get the message that it is not compatible with the new system(or something like that) and ask me to upgrade so I did. Then another message pops ups and asked for rebuilding the Thumbnails. So I clicked rebuild. Next it asked me to do one of three things(I can't remember all of them) so I chose the last one which is to download a photo to iPhoto. Now I only have that photo I downloaded in iPhoto file but not the rest of my pictures. The iPhoto library which is stored in my EHD shows it has 349GB but it only show one thumbnail of the last picture I downloaded after the rebuild process. What can I do to recover the rest of the file?
Thanks for your help.
George Kyaw
<Email Edited by Host>

I recently upgraded to Yosemite. Yesterday when I opened up the iPhoto (which I have it in my external drive due to the size of file) I get the message that it is not compatible with the new system(or something like that) and ask me to upgrade so I did. Then another message pops ups and asked for rebuilding the Thumbnails. So I clicked rebuild. Next it asked me to do one of three things(I can't remember all of them) so I chose the last one which is to download a photo to iPhoto. Now I only have that photo I downloaded in iPhoto file but not the rest of my pictures. The iPhoto library which is stored in my EHD shows it has 349GB but it only show one thumbnail of the last picture I downloaded after the rebuild process. What can I do to recover the rest of the file?
Thanks for your help.
George Kyaw
<Email Edited by Host>

Unable to sync or backup my iPad2 with the new iTunes. I keep getting the error ""iTunes could not back up the iPad because the backup was corrupt or not compatible with the iPad.". I've deleted all the old backups but still get this.

I'm totally frustrated by iTunes and don't know how to solve my problem. Like a lot of people on here I'm not able to sync or back up my iPad2 with my iTunes (version 10.4.1.10). I'm running Win 7 Ultimate 64 bit. My iTunes worked just fine until the 10.4.xx updates came out and since June I've not been able to back up or sync the iPad2.
When I connect and try to sync I get the error message, “iTunes could not back up the iPad because the backup was corrupt or not compatible with the iPad.”
I've deleted all the old backups so there are none on my system. I've deleted iTunes and re-installed the 64bit version several times but it has not made any difference. I've read and followed several suggestions on these boards about how to remove and reinstall everything but none have worked yet. I'm stumped here.

I had the exact same thing with my shuffle - same error message saying that it was corrupt so I restored it (wiping everything in the process) and the same message came up as soon as it reloaded. Thank god I didn't try it with my iPod or iPhone first. So many issues with this new version of iTunes!!!!!!!!

HT4972 After upgrading iPhone 4 to iOS 5.1.1 getting the error "iTunes could not restore the iPhone because the backup was corrupt or not compatible with the iPhone that is being restored" HELP!

I attempted to upgrade my iPhone 4 to iOS 5.1.1. I selected 'back up' from the phone in the device menu and iTunes confirmed that the phone had been backed up. I then installed iOS 5.1.1 which wiped everything on the phone & now I am getting the error "iTunes could not restore the iPhone because the backup was corrupt or not compatible with the iPhone that is being restored".
I have tried restoring factory settings but iTunes simply will not restore from back up & I'm not sure what else to do!
Any advice would be much appreciated.

I have the same issue and I KNOW my backup IS good. What happen is when you try to restore your phone apple says something like can I check for new updates and if you choose no, it just takes you back to the restore screen and a loop from then on. If you dont update from you phone then when you back up you will have the 5.0.1 back up and then when you update to 5.1.1 and then try to restore the backup from 5.0.1 it say it EITHER corrupt or incompatible.. It is incompatible and its hard as **** to restore back to 5.0.1. I followed the restore to a T and still getting errors. I lost all text history and have to reset up email. All just because I wanted a 1.2 Gigs of "other" space back.

I have PSE13 on my system. It was functioning properly and now I get these messages when I go to print: "The saved printer information is not compatible with this version of Photoshop Elements, or the saved printer is no longer available. You need to c

I have PSE13 on my system, Windows 8.1, 64-bit. It was functioning properly after installation and now I get these messages when I go to print: "The saved printer information is not compatible with this version of Photoshop Elements, or the saved printer is no longer available. You need to check your printer settings before printing." and then this statement: "Default printer could not be opened." I have reloaded drivers for both printers and made any upgrades possible. It was working fine before and now all of a sudden, nothing. Would prefer to have old PSE v.12 back, it worked with no problems.

See this thread
My Photoshop Elements 13 doesn't recognize my Canon PRO-10 printer. I've tried EVERYTHING. Reinstalled all my software, didn't fix anything. Can anyone help?

I have the current version of itunes, but when I go to update my ipod, I am getting an error message that says that it could not back up because the backup was corrupt or not compatible with the iPod. This is the first time trying to backup.

I have the current version of itunes, but when I go to update my ipod, I am getting an error message that says that it could not back up because the backup was corrupt or not compatible with the iPod. This is the first time trying to backup the iPod. I have authorized my computer. Still no luck.

Go to iTunes>Preferences>Devices and select the iPod backjp and click on delete and try again.
Also
- Reboot the computer
- Try another cable
- Try another USB port

Is the Audigy SE cound card fully compatible with Windows Vista

Hi, all. Is the Audigy SE sound card fully compatible with Windows Vista? I see conflicting posts about this issue. TIA. --
Bob
Website: http://www.Property-Aid.com
E-mail: [email protected]?Exchange ideas and investing tools at our Real Estate Mastermind Group on Yahoo Groups:
http://preview.tinyurl.com/ypue7o

Thank you, Mr. Dude. I just posted this question there and look forward to seeing the reply. I appreciate your help. --
Bob
Website: http://www.Property-Aid.com
E-mail: [email protected]?Exchange ideas and investing tools at our Real Estate Mastermind Group on Yahoo Groups:
http://preview.tinyurl.com/ypue7o

I cant print and get this message, "adobe elements, "the saved printer information is not compatible with this version of photoshop elements, or the saved printer is no longer available. you will need to check with your printer settings before printing."

I keep getting this message when trying to print in adobe elements, I am using a new Epson WF-3640 printer
"the saved printer information is not compatible with this version of photoshop elements, or the saved printer is no longer available. you will need to check with your printer settings before printing.

Hi,
If you are working in PSE13, please update it to latest PSE13.1 update available and see if it helps.
To apply update, you can go to Help > Updates and there you can see PSE13.1 update.
Thanks,
Anwesha

Is the geforce 6800 gt or ultra compatible with g5 june 2004?

Similar Messages

Maybe you are looking for