Is the GPS chip only available with the cellular LTE iPads??

I was wondering if the wifi only ipad 3 also included the GPS chip or not?

If you need built-in GPS capability then yes - though there are some stand-alone GPS units that apparently work with it e.g. Bad Elf (I haven't got it so I don't know how good it is).

Similar Messages

I::001 Only available with the RFC library from 4.0C onwa

Hello all!
I'm using SAP .NET Connector for integration between .NET application and SAP System.
When I try to work with standard document bapi methods like BAPI_DOCUMENT_CHECKIN or BAPI_DOCUMENT_CHECKOUTVIEW, I get an error in out RETURN parameter - I::001 Only available with the RFC library from 4.0C onwa
Please, help if you know how to solve this issue. Any help appreciated, and thanks in advance for the help.
Best regards,
Alex

Hello,
Is the function module remote enabled? Check the attributes of the function module, see
[remote enabled function module|http://help.sap.com/saphelp_nw04/helpdata/EN/22/0425f2488911d189490000e829fbbd/frameset.htm]
Next step to figure out this problem will be calling the function module remote and debugging it, see...
[external breakpoints|http://help.sap.com/saphelp_nw70/helpdata/en/af/0cb5403fd63426e10000000a1550b0/frameset.htm]
Regards,
Marcel

If i dont use the display when using the GPS and only listen to the voice instructions can that also makes the iphone overheat even if you dont use the display

because when i use the gps app in my iphone 4s in the car my iphone gets overheat so
if i dont use the display when using the GPS and only listen to the voice instructions can that also makes the iphone overheat even if you dont use the display
will that help?

When you use your GPS does your iPhone get hot enough to shutdown? The reason I ask is that I have run my GPS app with the screen brightness set to near max connected to power for hours. My iPhone got hot, but didn't shutdown.

I redirected iTunes to an external drive and moved my iTunes library and folder, but my hard drive is still low on space. How can I be sure that my music is all on the external HD ONLY, especially with the new iCloud technology?

I redirected iTunes to an external drive and moved my iTunes library and folder, but my hard drive is still low on space. How can I be sure that my music is all on the external HD ONLY, especially with the new iCloud technology? It doesn't look like I created any more space by doing this, AND I totally lost all my iTunes playlists. I'm not sure if because I added old library materials manually if this messed up my playlists, or if the new location is just not reading my moved library. In any case, I followed step by step instructions and found a few holes and thought I'd just "figure it out" but I guess I'm not as smart as I thought since I'm still scratching my head many hours later.
Thanks for any support ;-)
Eaglerocker

Quick answer if you use iTunes' default preferences settings: Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive. Open iTunes and immediately hold down the option (alt) key (shift on Windows) so you get a prompt to select a library, then guide it to the 'iTunes Library.itl' file in the moved iTunes folder.
If this is to a new computer and you put the copied iTunes folder in the default location of Macintosh HD > Users > *User Name* > Music then you don't even need to start with the option key held down, iTunes will automatically look for it there. (Make sure there isn't anything already in the iTunes folder there that you want to keep since you will be replacing it with the one you are moving.)
iTunes: How to move [or copy] your music [library] to a new computer [or another drive] - http://support.apple.com/kb/HT4527 - a somewhat bewildering and not always easily understandable set of options.

¿iTunes match is only available with the music on iTunes Store of my country?

I want to use iTunes Match but my question is.. if I have imported CD's (i'm from México), that they aren't available in the iTunes Store of my country, iTunes find the matches with other iTunes Stores (of the other countries) or it only work with the songs available on my iTunes Store (México)

Hi
I have achieved matches for tracks/albums that are not available in the UK store. If the track is on Apples server, there is a chance that you will get a match even though not available in local iTunes store.
Jim

Will the airport express in the future also be available with the 802.11ac?

will the airport express also be available with the 802.11ac technology in the future?

Apple as the most secretive company in the world keep their loyal customers in the dark and feed them a diet of .. well .. I cannot write its proper name.. but are you feeling like a mushroom??
They never tell until it is released.. but you can assume yes.. but the latest express was released last year.. in June.. the previous model had a lifespan of 4 years.. and the one before that, 4years.
http://en.wikipedia.org/wiki/AirPort_Express
If the pattern holds true there will be a new one in June, 2016.

RFC Problem:"I::001 Only available with the RFC library from 4.0C onwards."

Hello,
Ihave a VBA code that calls a BAPI via RFC to checkout a document. The Problem is that I get an error like in the subject. Here is my Code
Private Declare Sub RfcAllowStartProgram Lib "librfc32.dll" (value As Any)
Sub checkout_file()
Dim oDocument As Object
Dim oDocumentFile As Object
Dim oDocumentFiles As Object
Dim oReturn As Object
Dim oBAPICtrl As Object
'Creating BAPI object
Set oBAPICtrl = CreateObject("SAP.BAPI.1")
Set oConnection = oBAPICtrl.Connection
If oConnection.Logon(0, False) = False Then
MsgBox "No access to R/3 System"
Exit Sub 'Programm beenden
End If
RfcAllowStartProgram ByVal 0&
'Creating lokal instance of BO "Draw"
Set oDocument = oBAPICtrl.GetSAPObject("DRAW", "PM2", "A5N00030059989", "D", "000")
If Err.Number <> 0 Then
MsgBox "No local BO 'Draw' created!"
Exit Sub
End If
Set oDocumentFile = oBAPICtrl.DimAs(oDocument, "CheckOutView2", "DocumentFile")
oDocumentFile("WSAPPLICATION") = "DOC"
oDocument.CheckOutView2 OriginalPath:="D:\test\", _
DocumentFile:=oDocumentFile, _
DOCUMENTFILES:=oDocumentFiles, _
DocumentStructure:=oDocumentStructure, Return:=oReturn
MsgBox oDocumentFiles.RowCount
MsgBox oReturn("MESSAGE")
Set oConnection = Nothing
Set oBAPICtrl = Nothing
End Sub
I have the newest librfc32.dll in my System32 folder (Version 7110.0.46.6208). Where is the problem? Can it be a problem on the application server or something?
Thank you,
Thomander

Hi Thomander,
Note 885058 indicates that the problem is resolved with the latest
RFC and ICU files. The RFC library is contained in the RFCSDK, please
ensure that you are using the latest SDK, it can be downloaded from the
following location:
Support Packages and Patches
    ==> Additional Components
          ==> SAP NW RFC SDK
               ==> SAP NW RFC SDK 7.10
                    ==>Your OS
ICU libraries can be downloaded from service market place as part of
sap kernel. There are contained in the complete package sapexe.car
& in a seperate package UCLIB.sar
-> service.sap.com/patches
-> Entry by application group
-> additional component
-> SAP Kernel [ select the correct versions] & download the file
The naming convention of the library files varies depending on the
operating system, they may be called
"libicuuc.so.26", "libicuuc.sl.26", "libicuuc26.so" or "icuuc26.dll",
for example. You must therefore adjust the unpacking statements
accordingly.
Unpack the library to the temporary directory & then move it to the
kernel directory ("/usr/sap/<SID>/SYS/exe/run").
Caution: Make sure that the libicu* libraries do not overwrite any
existing files.
Once you are using the latest RFC and ICU files you should be ok.
Maybe the information in the following link could also be useful for this kind of error:
https://www.sdn.sap.com/irj/scn/wiki?path=/display/plm/i001Win32error+2
Best regards,
Christoph

Did you know the tablets are now available with the Edge program?

While tablets are now able to be purchased with the Edge, the Device Payment Plan has been discontinued. So, if you want to pay over 12 months, to keep unlimited data, you are out of luck. Either full price, or lose it and use Edge.
Just another way for Verizon to get rid of unlimited.

I would check again. The problem is when you went to a corporate store and that is the only way to get it. The stores were telling customers that Verizon's device payment plan was only for tablets.
That is the first lie on their parts. The second thing the store would tell customers that if you used the plan you would still lose unlimited data, lie two.
You could not grandfather in a plan such as the device payment plan. Grandfathered to whom? Those who already choose it and are on it? Those who got grandfathered in how? Maybe a wrong choice of word in your post.
Like Ann154 the plan is still showing on the Verizon wireless site.
I also called my former account executive at Verizon and he said he knew of no discontinuance of the program.
So unless you have advance information via working for Verizon wireless I would wait for the news release.
In your case I would go to a corporate store and insist on them honoring the Device Payment Plan. Maybe mention your attorney, or a state regulatory agency etc.
Good Luck

Does the new iPod only charge with the computer?

I have just recently purchased a video iPod. Soon after opening the box I realized that it did not come with a plug that would allow you to charge it using a power receptacle. The old iPod did. What is the point of having an iPod if it is not convenient to own one? If you have to carry around your computer just to charge it, why not just carry the computer with all of your songs loaded onto it? I and all who travel would like to know why the video iPod isn't as convenient as the old one.
Intel Celeron Windows XP
Intel Celeron Windows XP

Here is a link to where you can get a power adapter for 6 bucks. It's the same thing but cheaper. I have one and it works perfect. It doesn's come with the usb cable so you have to use the one that came with the ipod.
http://www.handhelditems.com/apple-ipod-video-travel-charger-adapter-p-4669.html

I want to buy ebooks from iBooks store, not on Amazon. But I can't because it says that the ebooks are only available on the US. Help

By the way, I live in the Philippines. Please help!

You just have to use whatever store has the book you want, that is how it works at present. Try Kindle, Nook, Kobo, Googlebooks, Sony if something is not available to you in the iBookstore.

Is Compressor only available in the FC Studio suite?

Is this program only available with the suite package? If so, are there any other programs I can use to compress QT & WM video files?

Is this program only available with the suite package?
Yes.
are there any other programs I can use to compress QT & WM video files?
Yes. BitVice, Episode, Sorenson Squeeze to name a few.
-DH

Downloaded movies now only available via the Cloud

I've purchased (not rented) and downloaded several movies and TV shows to my daughter's iPad (over the past several months). All of a sudden, as of yesterday, only three of them are still available directly from the device (i.e. operating without WiFi in Airplane Mode), the rest are only available via the Cloud. This has occured on both iPads that this iTunes account is registered. My 4-year old daughter says she clicked an "X" when she went to watch a movie, but as I wasn't there when it happened, I don't know what she clicked exactly and where. Any help figuring this out would be greatly appreciated.

What iOS version is on the iPad (Settings > General > About > Version) ? On iOS 5 and possibly 6 (I can't remember when it changed), you could delete films and/or TV programmes from the Videos app by pressing and holding it on the selection screen in the app, and after a second or two it would get an 'x' on its top left corner - tapping that would delete it from the device.

Allignment tool not available with the Student Version?

Is the Allignment tool not available with the Student Version? It appears to be clickable yet no action… Is there a preference I'm missing?

Shawn,
Educational is a full version.
You need to select (at least) two objects, then apply the deired Align operation(s).
If something is really wrong, you may have a look at the list below.
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

This should go on a Waterfox forum, but can't find one. Waterfox updater is failing, can't find the latest version. The website says the latest version ( 9.0.1) is only available via the uploader. Catch-22

This should go on a Waterfox forum, but can't find one. Waterfox updater is failing, can't find the latest version. The website says the latest version ( 9.0.1) is only available via the uploader. Catch-22

http://waterfoxproj.sourceforge.net/news/26/15/Powered-by-Mozilla-Waterfox-9-0-1
Waterfox has now been accepted as a project by Mozilla and has been placed on their website! '''Waterfox 9.0.1 has also been released, but at the moment is only available through the internal updating program available in Waterfox 9.0. This is to try and iron out any issues for the release of Waterfox.Next.'''
It is not a official Mozilla product as it is still third-party. http://www.mozilla.org/projects/powered-by.html

Only PSA with the 'Update subsequently in data targets'- BI 7.0

Hello friends,
We are currently on BI7.0 and my concern is with the InfoPackage Processing of 'Only PSA' with the 'Update subsequently in data targets'checked. When I load the data it loads into the PSA and I can see it in the monitor and in the Manage of the DSO it shows me Transferred '328' and Added Record '0'/. How do I manually update it from the PSA into the data target from this point?
When I select 'PSA and then into Data Targets (package by package)' in the DSO manage screen it shows me Transferred 328 and Added Record '123'. So certainly that means that the data is not being subsequently loaded from the PSA when 'Only PSA' with the 'Update subsequently in data targets'checked option is used. Please tell me how to update data from PSA into Data Target when 'Only PSA' with the 'Update subsequently in data targets'checked is selected.
Many thanks.

Hi,
In BW 3.x data flow, 'Only PSA' with the 'Update subsequently in data targets' option in Info package will load up to PSA only in case of the Process chains.
After this info package we must add the additional step "Update from PSA to Target" in order to load to the target.
Hope this will fix ur issue.

Is the GPS chip only available with the cellular LTE iPads??

Similar Messages

Maybe you are looking for