Is the HH 2.0 firmware still being developed?

My Home Hub 2.0 Type A hasn't been updated for quite a long time now, yet I still see a number of issues which seem to be within the firmware:
DHCP Server stops issuing addresses to particular devices - cured by a HH reboot
NAT goes strict for XBox or PS3 - cured by a HH Factory reset
General slow down of internet throughput after heavy usage - cured by a HH reboot
Is there anything in development, or should I just accept that this is the end of the road for the firmware?
I would be very willing to participate as a Beta tester for any firmware development and try to constructively help it move forward.

Hi Brummygit,
Yes we are always developing new technology and firmware versions to improve upon what we already offer but I am afraid I cant give you any dates for when you might expect this to be available.
Thx
Craig
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)”
td-p/30">Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Similar Messages

Is Eclipse (java viewer) for CR still being developed?

Hello,
Is the Eclipse (Crystal java viewer) still being invested in from a development perspective? I'm currently using the .NET (HTML) viewer because of two reasons:
1. The Java viewer has embedded flash functions which render it useless on Apple devices.
2. I heard the Java viewer was not going to be supported in favour of the .NET (HTML) viewer.
Can you someone confirm if the Eclipse (Java) viewer is still being developed. Also, is there a version that strips out the Flash functions?
I'd like to drop the HTML viewer because I'm paying $600/year just to run Windows servers just for this viewer!
Thanks for any assistance on this!
Mark

Hi Brummygit,
Yes we are always developing new technology and firmware versions to improve upon what we already offer but I am afraid I cant give you any dates for when you might expect this to be available.
Thx
Craig
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)”
td-p/30">Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

How to use srcpac? Is it still being developed?

srcpac and srcpac-git don't work for me, but another user claimed it works just fine. Can anyone please point out what am I dong wrong?
srcpac-git has e.g. an updated manpage, but still doesn't work
$ cat /etc/srcpac.d/less
s#--prefix=/usr#--prefix=/usr/local#
$ srcpac -So less
sed: can't read /var/abs//less/less/PKGBUILD: No such file or directory
This is the example from the manpage.
Is it still being developed? Can I flag it out of date? Why hasn't it been released in over a year, even if the git version has some improvements?

Hi Community,
quickly before i leave the office for today:
an experienced user proposed a workaround with the WB_TO_DATE function, that i previously overlooked. It validates and can be queried with IS NULL.
He mentioned, that the expression might be in a SQL-only part of the OWB-code. But wouldn't this mean one should be able to use if instead of Case?
Hoping for some clarification,
Marc

Error: The logical component X is still being used

Hi,
In Transaction SMSY, i want to delete a Logical Component. So, pre-condition is to check whether it is mapped to any Projects/Solutions. By right-clicking - Where used list , i have seen that it is mapped to a Project. So, in transaction SOLAR_PROJECT_ADMIN under tab System Landscape, i tried to delete the Logical Component but receiving the error message - The logical component X is still being used.
Please help.
Many Thanks,
Mohan.

Hello Mohan,
You can also solve this by using the "Replace Logical Component" button in the system landscape within SOLAR_PROJECT_ADMIN.
Thus you can replace all the occurances of the Z_ logical component by e.g. an existing standard SAP logical component.
Afterwards you will be able to delete your Z_ logical component in SMSY (or in LMDB from 7.1 SP9 on).
Best regards,
Peter

Is the HCP Roo still being developed

Hi all,
just discovered the Roo addOn for HCP, but the last commit was 2013. Is the addOn still being developed or is it "dead". And if it is not dead, will there be UI5 support, that seriously would rock for prototyping..
Regards

The 3GS is out of production. There are plenty of refurbished 3GC iPhones, and that's what you'll receive.

Is Livecycle Designer still being developed for further versions?

I was just curious if Livecycle Designer is still being developed for further versions.. haven't seen any recent activity on the blogs and on the forums..
Thanks,

Yes it is still being developed ....there is definiately an update in the LiveCycle platform due later this year. As far as activity on the forum and in blogs, there is a new blog entry about once every two weeks on FormFeed and this forum produces a large amount of queries daily so in my view there is still laots of activity.
Paul

Spry still being developed?

I wonder that the current version is more than 1 year old.
Is spry still being developed or do I risk to run into another dead end as I did with ADDT using spry?

Please do not remind me. I am still having problems with my sites, some of them using the Ajax Toolkit, need DW8, others using ADDT, need DWCS4 and to keep track of the latest I need DWCS5/DWCS5.5; it is a nightmare. In the real world they call this polygamy and should be illegal.
Good part is that Spry has been included in CS5.5, bad news is that CS5.5 leans towards jQuery. In fact, the Spry team is working on a Spry based dataset for jQuery as per https://github.com/jblas/jquery-dataset. But even that has been halted since 15th Dec 2010. Go figure.
My conclusion, use SpryDataSets and start learning jQuery for effects etc. Much is the pity and, unless Adbobe can convince me otherwise, I do not trust them.
Gramps.
PS Since Adobe is leaning towards jQuery, maybe we should ask for a jQuery for DW forum.

OHJ still being developed?

I'm sure this has already been discussed, but is OHJ still being developed? It's been at version 4.2.7 for over 2 years now.

Please do not remind me. I am still having problems with my sites, some of them using the Ajax Toolkit, need DW8, others using ADDT, need DWCS4 and to keep track of the latest I need DWCS5/DWCS5.5; it is a nightmare. In the real world they call this polygamy and should be illegal.
Good part is that Spry has been included in CS5.5, bad news is that CS5.5 leans towards jQuery. In fact, the Spry team is working on a Spry based dataset for jQuery as per https://github.com/jblas/jquery-dataset. But even that has been halted since 15th Dec 2010. Go figure.
My conclusion, use SpryDataSets and start learning jQuery for effects etc. Much is the pity and, unless Adbobe can convince me otherwise, I do not trust them.
Gramps.
PS Since Adobe is leaning towards jQuery, maybe we should ask for a jQuery for DW forum.

Is Swing still being developed?

hi,
does anyone know if Swing is still being actively developed?
thanks,
asjf

check this, it provides some outlook:
http://developer.java.sun.com/developer/community/chat/JavaLive/2003/jl0121.html

We paid the annual premium and are still being charged for the monthly.

We started with Adobe by paying $14.99 monthly. Last August, we decided to go with the annual to save money, Since that time, we have continued to be charged monthly since August - December 14.99 monthly, in error. How can I get refunded the overcharge $59.96 and stop this charge?

Sara, thank you for your response. I was in touch with customer care before they contacted you to contact me. They said they could not help completely but that you should be able to. I need to cancel the $14.99 monthly charge and be refunded the $14.99 charges since I paid the annual fee. The $14.99 is a duplicate charge as I only have one form. Please advise as to how I can stop the monthly charges and receive a refund for the duplicate charges. My phone number is 931.372.7200 if you would like to speak in person. This is the transcript:
Adobe <[email protected]>
Jan 9 (3 days ago)
to Debi
For additional help, reach us at http://helpx.adobe.com/contact.html
General Info
Chat start time
Jan 9, 2015 8:01:45 AM PST
Chat end time
Jan 9, 2015 8:28:01 AM PST
Duration (actual chatting time)
00:26:15
Operator
Sunil Kumar
Chat Transcript
info: Thank you for your patience.
While you wait, you can try our community forums where experts are available 24 hours a day, 7 days a week.
info: You are now chatting with Sunil Kumar.
Sunil Kumar: Hello! Welcome to Adobe Customer Service.
Sunil Kumar: Hi Debi.
Sunil Kumar: One moment while look into the issue
info: Your chat transcript will be sent to [email protected] at the end of your chat.
Sunil Kumar: I understand that you want the refund for the subscription which you have purchased by mistake thinking that it is a yearly subscription, right?
Debi Smith: We started with Adobe by paying $14.99 monthly. Last August, we decided to go with the annual to save money, Since that time, we have continued to be charged monthly since August - December 14.99 monthly, in error. How can I get refunded the overcharge $59.96 and stop this charge?
Debi Smith: I want to cancel the monthly $14.99 service because we have paid for the annual service. This charge should have stopped when we started the annual. Are they two different programs?
Sunil Kumar: Thank you for the information.
Sunil Kumar: Please allow me 3-4 minutes while I check your account for information and help you.
Debi Smith: k
Debi Smith: I have to leave you. Can you please email me any other questions? Otherwise, please refund the $59.96 to my credit card, stop the $14.99 charges and keep the annual subscription going, as it. My email is [email protected] and phone 931.372.7200 Thanks!
Sunil Kumar: Okay.
Sunil Kumar: Is there anything else I can help you with?
Sunil Kumar: I'm sorry, did I lose you?
Debi Smith: ARE YOU STILL THERE?
Sunil Kumar: Yes. Sorry for the delay.
Debi Smith: What is the status of the refund and the correction to my account?
Sunil Kumar: I'm sorry that it id not possible to provide the refund for all the charges. As you are contacting now, I can provide you the refund for the last charges.
Sunil Kumar: Will that be helpful for you?
Debi Smith: I have contact Adobe before about this and thought it was taken care of.
Sunil Kumar: Thank you for your patience.
Sunil Kumar: I check and see that I need top forward the case to our relevant team for the for the refund for the subscription.
Sunil Kumar: They'll contact you in 2-3 business days for the refund issue.
Sunil Kumar: Is that okay for you?
Debi Smith: General Info Chat start time Nov 12, 2014 3:07:00 PM EST Chat end time Nov 12, 2014 3:37:31 PM EST Duration (actual chatting time) 00:30:31 Operator Rakesh Chat Transcript info: Thank you for your patience. While you wait, you can try our community forums where experts are available 24 hours a day, 7 days a week. info: We are still assisting other customers, thank you for your patience. You can also try our community forums, available 24 hours a day, 7 days a week. info: We are still assisting other customers, thank you for your patience. You can also try our community forums, available 24 hours a day, 7 days a week. info: We are still assisting other customers, thank you for your patience. You can also try our community forums, available 24 hours a day, 7 days a week. info: We are still assisting other customers, thank you for your patience. You can also try our community forums, available 24 hours a day, 7 days a week. info: We are still assisting other customers, thank you for your patience. You can also try our community forums, available 24 hours a day, 7 days a week. info: We are still assisting other customers, thank you for your patience. You can also try our community forums, available 24 hours a day, 7 days a week. info: We are still assisting other customers, thank you for your patience. You can also try our community forums, available 24 hours a day, 7 days a week. info: We are still assisting other customers, thank you for your patience. You can also try our community forums, available 24 hours a day, 7 days a week. info: We are still assisting other customers, thank you for your patience. You can also try our community forums, available 24 hours a day, 7 days a week. info: We are still assisting other customers, thank you for your patience. You can also try our community forums, available 24 hours a day, 7 days a week. info: You are now chatting with Rakesh. Rakesh: Hello! Welcome to Adobe Customer Service. How are you doing today? Rakesh: Could you please elaborate your issue Rakesh: Are we still connected? Rakesh: Are we still connected? Rakesh: We have not heard from you for some time. Do you wish to continue to chat? Rakesh: Since we have not heard from you for some time, we will now end this chat. Please click to chat with us again if we can be of further assistance. Rakesh: Thank you for contacting Adobe. We are available 7 days a week, 24 hours a day. Goodbye! info: Your chat transcript will be sent to [email protected] at the end of your This was an email from 11/12/14 Debi Smith: When I realized that the monthly charge wast $14.99, I paid for the annual subscription and understood that the $14.99 charges would stop and the previous one paid would be refunded. Please advise as to when the refund will be given. I purchased the annual in September and the last $14.99 charge was October 13th. My account shows that both plans are still in play and I am being charged for both. Please help as I only want the annual and the other needs to be credited.
Debi Smith: Will they email or call? I have to go now.
Sunil Kumar: They'll email you.
Sunil Kumar: Is there anything else I can help you with?
Sunil Kumar: Are we still connected?
Sunil Kumar: Since we have not heard from you for some time, we will now end this chat. Please click to chat with us again if we can be of further assistance.
Sunil Kumar: Thank you for contacting Adobe. We are available 7 days a week, 24 hours a day. Goodbye!

Is Spry still being developed?

Hi!
I was just wondering if development is still continuting on Spry. I like Spry a lot, so it would be saddening if Spry is a "dead fish in the water".

Read Donald Booths reply in this topic; http://forums.adobe.com/thread/448728?tstart=30

Contracts - 'Document still being processed in the background; try again la

Hello,
When trying to make adjustments to multiple contracts we are receiving the error message 'Document is still being processed in the background; try again later.' We have tried again later to no effect.
Ultimately, this means that these contracts (30 altogether) cannot be altered in anyway i.e. held, deleted, released, approved and it means that they just sit there.
This also has implications when raising another contract to replace these contracts. For example if you want to use the same vendor this will cause great confusion for our users when trying to select the correct correct to spend money against when raising purchase orders. Often the result is the user selecting the wrong contract.
Have you any suggestions on why this error message is appearing?
Many Thanks,
Sarah

1465740 - SRM document is stuck in the approval process
Symptom
Workflow hangs.
Workflow gets stuck.
SRM document in status waiting.
Approval process cannot continue.
SRM document frozen in status 'awaiting approval'.
BBP_PD 443 Document is still being processed in the background; Try again later
BBP_ICON_TEXTS 049 No workflow started. Application error occurred
Environment
SAP Supplier Relationship Management
Reproducing the Issue
Create or change a document in SRM.
Cause
*Not possible to identify root cause without further deeper analysis
Resolution
Find the object guid of your SRM document via transaction BBP_PD.
Then display the relevant workflow instance via transaction SWI6 using the following steps:
Select BOR object type.
Enter your object type.
Enter your guid (or document number in the case of shopping cart) in the Key field.
Select variant All Instances.
Select selection period All.
Hit execute.
Click on icon 'Display workflow log'.
Click on icon 'List with technical details'.
Click on icon 'Print Log'.
Record the date and time of the very last step in the workflow log.
Using the date and time of the last workflow step, here are some transactions that can be used to investigate the root cause of the problem.
SM58 - check for stuck remote function calls
ST22 - check for system dumps
SM13 - check for stuck update requests
SM21 - check in the system log for anything unusual
SWUD - run a consistency check on the workflow
Enter the task number and hit enter e.g. 14000044
Choose 'Test Environment' and flag 'Including parts'
Execute
Choose 'Consistency check for components' and flag 'Including subworkflows'
Execute
Red lights indicate an error in the definition.
Header Data
Released on 05.05.2010 09:53:08
Release status Released to Customer
Component SRM-EBP-WFL Workflow
Priority Normal
Category Problem

Bad workflow ? :-( document is still being processed in the background :-(

Hi guys,
I have activated workflow without approval for PO's (saved & changed: WS14000075).
Everything was working fine.. BUT.. For some reason, now some PO documents have the status "Waiting Approval", and if I try to edit them,I got the following message: "document is still being processed in the background"
How can I fix this ?
Thanks for your help guys !
Best regards,
Diego

Hello Diego,
I've already seen this kind of pb.
You should navigate to the admin workflow runtime (menu swld) then administration --> workflow runtime, there is some usefull transactions.
First check the customizing (SWU3) and ensure that workflow runtime is ok.
Then try to restart wi in error (SWPR and/or SWPC) and check RFC transactions (SWU2).
Rgds,
Pierre

Sourcing Cockpit: Document still being processed in background

Dear experts,
we are facing the following problem in SRM 5.0 extended classical szenario.
In transaction Sourcing Cockpit when I click on create PO I reach the "Sourcing - Document Preview" screen, where I can click on button "Process PO".
Everytime I click on button "Process PO" I get the error message "Document is still being processed in the background; try again later".
PO is created but in status HELD. I have to go to transaction "Process Purchase Order (BBP_POC)" in order to create PO so that status changes to ORDERED.
There are no entries in table BBP_WFLOCK.
Thanks in advance and best regards
AD

Thanks for your answer.
Regarding your points:
1) It happens in almost 95% of the cases but as per now we could not figure out a rule when it happens and when not.
2) yes, it happens also after logoff.
For the user that is working in sourcing cockpit, the following entries are in SM12:
100 USER1 14:06:36 X CRMD_ORDERADM_H 10047BDCB4F6CD52BF8E1000000AC1ABC35 1 0
100 USER1 14:06:36 E PRCD_HEAD 10047BDCDBE6CD52BF8E1000000AC1ABC35 1 1
Regards
AD

I have songs on my iPod and iTunes where sections ranging from 40 seconds to 2 minutes do not play. The song status bar indicates the file is still being played but there is no audio. What can I do to repair or replace these files?

I have songs on my iPod and iTunes where sections of the song ranging from 40 seconds to 2 minutes will not play. The song status bar indicates the file is still being played there is no audio. What can I do to repair or replace these files?

If iTunes purchases, delete and redownload by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Otherwise delete and resync if they play OK in iTunes on the computer

Is the HH 2.0 firmware still being developed?

Similar Messages

Maybe you are looking for