Is the Hiper Type- R 580 modular PSU compatible with MSI K8N SLI Platinum?

Hey guys, i just recently bought a Hiper Type R 580w PSU after my old PSU went bad.
I installed the new PSU a few hours ago and came across a problem, nothing shows up on screen.
When i turn on the computer, the green light is constantly on including my dvd/rw light.
I double checked everything were connected properly and everything seemed to be connected properly.
The cpu's fan are running properly including the graphics cards and the case's fan but i can't pinpoint whats causing the the green activity light to light constantly including the dvd/rw.
I also tried resetting CMOS but it didn't fix the problem.
So now i'm starting to wonder if it's to do with compatibility issues between the Hiper Type R PSU and my K8N SLI Platinum motherboard.
So i just wanted to know if the Hiper Type R 580 PSU is compatible with the K8N SLI platinum?
I would grately appreciate any assistance.

In short no.
The Hiper Type- R 580 does NOT have a -5V supply line
Although the -5V requirement has been removed from some MSI designs, the MSI page for the K8N SLI Platinum http://msicomputer.co.uk/Products.aspx?product_id=703525&cat_id=77 states:
Quote
MSI Reminds You...
• These two connectors (JPWR1 & JPWR2) connect to the ATX power supply and have to work together to ensure stable operation of the mainboard.
• Power supply of 450 watts (and above) is highly recommeded for system stability.
• For ATX 12V power connection, it should be greater than 18A.
• For this model, you must use the power supply that with a -5V pin supply.

Similar Messages

Another little niggle with the MSI K8N SLI Platinum

Hello, I have just been benchmarking using Everest.
I did a mem read test and the result below is wrong, I have an amd64 venice 3200.
I had run this test earlier in the day and it was showing the 3200.
CPU   CPU Clock   Motherboard   Chipset   Memory   Read Speed
Athlon64   2000 MHz   MSI K8N Diamond / K8N SLI Platinum (MS-7100)   nForce4-SLI   Dual PC3200 DDR   5270 MB/s
thanks
ps. I have just noticed that outlook express is taking twice as long to open :(
pps I must have had to much to drink, or something just got logs from mirc and here is what it said
Athlon64   2000 MHz   MSI K8N Diamond / K8N SLI Platinum (MS-7100)   nForce4-SLI   PC3200 DDR SDRAM   3045 MB/s
This is what it is reading after sorting the ram stick problem out.
CPU   CPU Clock   Motherboard   Chipset   Memory   Read Speed
Athlon64   2000 MHz   MSI K8N Diamond / K8N SLI Platinum (MS-7100)   nForce4-SLI   Dual PC3200 DDR   5259 MB/s
Sorry for time wasting

Sorry flow, took to long to edit post
https://forum-en.msi.com/index.php?topic=88965.0
this explains a little, and yes I have just built this comp, first attempt at a serious upgrade. Apart from problems with faulty stick of RAM in the beggining everything has run smoothly.
Then I discovered benchtesting and as I said earlier, am a bit how can I say it, mellow so thanks for the reply, and I hope you are still here when I attempt to overclock
I knew I should have come here first

Will the X-Fi Fatal1ty run on the MSI K8N Neo4 platinum SLI Bo

Hi there i was just wondering becasue i have heard some things that it wont run together very well and some people say that it works sometimes and then kicks out. Feedback would be greatly appreciated. Thanks Aaron

Hi Aaron,
The problem described in the "X-Fi Problem (rebooting)" thread does not affect the cards that have X-RAM.
I have a slightly different version of that board at home (MSI K8N SLI Platinum, not Neo4 model) and I'm running an X-Fi Fatalty FPS card on it, with no problems whatsoever.
Cat

The data type of InfoObject 0ORGUNIT is incompatible with field 0ORGUNIT

I am trying to create a DataSource in BW to load the organizational hierarchy from HR R/3 to BW. I get the message "The data type of InfoObject 0ORGUNIT is incompatible with field 0ORGUNIT,"
Our BW version is 3.5; the version of HR R/3 is SAP ECC 6.0.
I'm not sure what this message means but if I continue to click OK, I get transfer structures for the org attributes and hierarchies but not the text. The key to the text is 60 characters. Shouldn't the key be the org unit, which is in format NUMC 8?
I was able to create this DataSource last summer, when HR was in a different version (4.6?) with no issues. Does anybody have any idea what's wrong and what I can do about it?
Thanks!

Would be nice if you could share the resolution they found,
since that might help other people as well.
For instance, me.... as we face exactly the same problem at the moment !!
Ch

Recommend me a PSU for MSI K8n SLi Mobo

I recently purchased a MSi K8n SLi Mobo with a X800XL GFX Card and was sold a Hiper 425 PSU, after getting everthing home a built it has come to my attention that to make the onboard sound work, that Pin 20 on the PSU must be -5. The PSU that was sold to me does not carry this pin 20 -5V.
Can somebody please recomend me a PSU that will have this -5V pin at Postion 20
Thanks for any Help
Az-Hudson

Quote from: kctay on 03-March-05, 01:01:05
Turbo Cool 510-SLI
http://www.pcpowerandcooling.com/products/power_supplies/highperformance/turbocools/510/
But I see that you have an ATI video card? Does that mean that you have no plans to actually use the SLI component? This makes a big difference since one card requires much less power.
I was lucky enough t have won my GFX Card, but i do plan on eventually going SLi
And thanks to all who replied

*UPDATED 7/15/04* Complete guide to bioses, drivers, and needed files for the MSI K8N Neo Platinum

Complete newbie's guide to bioses, drivers, and needed files for the MSI K8N Neo Platinum:
Last Updated: Thursday July 15th, 2004
Bioses:
(In order of date released.)
1.1b3 - (Download)
- Pre-1.1, given to reviewers to use in their reviews and benchmarks.
- Less stable, but supposedly you get slightly better overclocks.
1.1 Official - (Download)
1. This is AWARD BIOS release
2. This BIOS fixes the following problems of the previous version:
- Memory always run DDR 200 when install single side DDR on DIMM2 & DIMM3.
- Windows 2000 can't format the RAID IDE HDD when plug in Promise 378 controller.
1.2b5 - (Download)
1.2b7 - (No Download Yet)
1.2b10 - (Download)
- First attempt to fix false temperature readings. Fixes it for some people with Newcastle cores and doesn't fix it for anybody with Clawhammer cores.
1.2b12 - (Download)
- Second attempt to fix false temperature readings. Fixes it for some people with Newcastle cores and some people with Clawhammer cores.
1.3b1 - (Download)
- Another attempt to fix temperature problems?
- Possibly fixes cold boot/power light issues?
1.2 Official - (Download)
1. This is AWARD BIOS release
2. This BIOS fixes the following problems of the previous version:
- System can't resume from S3 sometimes when install USB device.
- Support K8 Sempron CPU.
- Turn off keyboard LED in S3.
--Quick Guide for flashing BIOS, provided by MSI--
1. Create a MS-DOS boot diskette, then copy the the .exe and the bios file to the floppy disk. Both of these files can be found in the package you downloaded.
2. Press "Delete" and go to BIOS setup while computer bootup.
Check BIOS advanced features and see if BIOS flash write control is enabled
(This option must be enabled. If you can not find this setting, it means the BIOS can be
flashed.)
3. Boot from MS-DOS boot diskette and get a:\> prompt.
4. Type "", then press ENTER
5. The flash program will then ask "Do you want to save BIOS?", please press "N" for no. The when you see Press 'Y' to program or 'N' to Exit, please press "Y" to continue.
6. After flashing complete, remove floppy and reset the system .
7. Press DELETE or F1 when prompted at first reboot after flashing.
8. Load BIOS optimized defaults, then save settings and exits.
Drivers & Needed Files:
(Note: All these drivers are for Windows XP.)
Leaked Nvidia nForce3 Chipset Drivers Version 4.40
(Please use at your own risk, these are LEAKED drivers. Password for the .zip file is "ocworkbench rules". Also, you will need to rename the WinXP_2K folder in IDE to either WinXP or Win2K else the installer doesn't pick it up.) Thanks for the link Wonkanoby!
*NEW* Leaked Nvidia nForce3 Chipset Drivers Version 5.03
More leaked drivers? Seems some parts of the drivers are older and some are newer.
1. Windows XP Service Pack 1A (Web Install) -or- Windows XP Service Pack 1A (Full Install)
2. Microsoft DirectX 9.0b (Web Install) -or- Microsoft DirectX 9.0b (Full Install)
3. Nvidia nForce3 Chipset Drivers Version 4.24
4. AMD Athlon 64 Processor Driver Version 1.1.0.14
5. Nvidia Video Card Driver Version 56.72 -or- Omega Nvidia Video Card Driver Version v1.5303
(The Omega drivers are third party drivers optimized for gaming, most prefer these over the standard Nvidia drivers.)
5. ATI Video Card Driver Version 4.7 -or- Omega ATI Video Card Driver Version 2.5.51
(The Omega drivers are third party drivers optimized for gaming, most prefer these over the standard ATI drivers.)
6. Onboard Sound Driver (Realtek AC'97 Audio Codec) Version A3.61
It is HIGHLY reccomended that you install the drivers/needed files in the order listed above. Please note that there are two #5's because you either install one or the other depending on your video card, do not install both of them.
You will come across a problem here though. You can't install the chipset drivers without installing the Windows service pack and DirectX first, but the Windows service pack and DirectX installs need the internet to download files and you won't have working internet until you install the chipset drivers. Here's what I did to get around this. Instead of downloading the web install versions of Windows service pack and DirectX, download the full version and and put them along with all the other drivers on a backup hard drive or burn them to a CD, this way you will have all the drivers you need when it's time to install them and none of them will require the internet to download files.
Another note when installing drivers. Apparently the Nvidia chipset drivers also come with drivers for the onboard sound, but people seem to agree that the Realtek onboard sound drivers are better. When you are installing the Nvidia chipset drivers, just be sure to uncheck the box for sound drivers when it asks you which drivers you would like to install. Now you can safely install the Realtek drivers without any chance of conflicting sound drivers. Thanks for the tip Wonkanoby!

Quote
Originally posted by RLiu818
Quote
Originally posted by Deviation56
Quote
Originally posted by RLiu818
You CAN install the nforce drivers BEFORE installing SP1. The only requirement to install the nforce drivers is DX9.
So is SP1 still recommended to install before the nforce drivers?
The installer still reccomends to install it beforehand for full USB 2.0 functionality... I would have put what you said in there but I wanted to keep it as simple as possible.
oh. IIRC the installer just says USB 2.0 will be fully functional after SP1 is installed. So after you install SP1 you go into device manager and u click update driver and it will auto search and update the driver.
Simplicity-wise, i guess its pretty much equal. It might take less preparation to just copy DX9 full onto a CD and install that first, then nforce driver, then right away you have yoru internet connection.
but i dunno.. i guess i will try it your way this time when my RMA"d board comes.
i will be fomratting and doing a fresh install later on today and will let you know if i come across any problems

Adobe Type 1 Font is not compatible with Windows 8 64bit?

I found that Adobe Type 1 fonts are not compatible with applications that run on Windows 8 64bit. When used, the appearance of fonts on the screen is not correct. Even worse, the font does not appear at all in the CorelDRAW X6. Strangely, when printed, the fonts were no problems. How can I make these fonts can be used in Windows 8 64bit? For additional information, these fonts appear normally when reviewed through the Windows Fonts folder, but does not display correctly when used in the application.

I believe I have a similar issue. I do have the latest Windows updates.
I'm on a new Win8 system, and I installed my Adobe type collection (bought years ago with ATM) by copying the .pfm and .pfb files to Windows\Fonts (there's no right-click > install for fonts on Win8 it seems; copying the font files to the font directory is what I've read as the install procedure.)
Windows then shows an error about .pfb incompatibility, so I selected "skip" for those files.
The result is that my fonts are installed and usable BUT this really screws up IE10 for certain websites. For example, I get blank pages for sites like wordpress.org and validator.w3.org. There doesn't seem to be any way to fix this other than doing a system restore to a point before the fonts were installed. Removing the font files from the Windows\Font directory doesn't help. I don't use IE10 with any regularity but I need it to work for testing purposes.
Is there a way to install these fonts? Is there a way to uninstall them (other than a system restore) if they affect IE10?
It's really hard to install on a one-by-one basis as need arises because I can't tell what the font names are from the file names. There's no application, like a type viewer, that will show me the fonts if I double click the file. (I just ran into this now... I need to use a Garamond type face but have no idea which one it is by looking at the .pfm and .pfb files.)
I would consider buying Font Folio if this is the answer but it's only available for a minimum of 5 licenses? I'm a freelancer and only need one licence.
Should I just use an online tool to convert my .pfm/.pfb files to an OpenType or similar format?
Thank you in advance!

Is the I-Pod Touch 4th generation bluetooth compatible with Nokia E72

Is the I-Pod Touch 4th generation bluetooth compatible with Nokia E72

No. That type of profile is not supported by your iPod Touch. See this article for a list of profiles that are supported.
iOS: Supported Bluetooth profiles
B-rock

MSI K8N Neo Platinum Nforce3 250GB - PSU?

My sister in law have this board, MSI K8N Neo Platinum nforce3 250gb chipset, recently the power supply sounds noisy and a high frequency sound from the Antec Truepower 380W SP. Had maked an RMA to Antec and they had agreed to replace the 380W psu with SmartPower2.0 450W. But they asked me one question, that im not sure about:
"Make sure that your motherboard does not need the -5V. If you want more information on the power supply you can look at this link: http://www.antec.com/us/productDetails.php?ProdID=26450 "
So, do Antecs SmartPower 2.0 450W suits this board and what really is -5V for? As I read the manual, it said ATX 20 pin power connector: JWR1 and at pin 18: -5V
So does it mean this board need a psu that gives -5V on ATX 20 pin power connector and thos board can't use with Antecs SP 2.0 450W?

Quote from: syar2003 on 22-February-06, 05:10:37
Hi!
The K8N Neo Platinum (MS-7030) doesn't use -5v to anything.
So the -5v from the old atx spesification is not needed in your case.
WoW, thanks for fast reply!
So, it won't be any problem to use Antecs SmartPower 2.0 450W with this board then? Want to make sure about it, before accept Antecs offer for replacement and had spent over 4 days to find the problem with his computer. Really don't want to do it again.
This is his riggs:
Antec Sonata
AMD 64 3000+ S754
Corsair Value S. PC3200 DDR 512MB
Maxtor Diamondmax 9 250GB SATA
Maxtor Diamondmax 9 IDE 160GB
Sapphire Radeon 9550 Atlantis 128MB DDR
and
Accton ethernet card on PCI slot
MSI D-Bracket2
so
With the "new" Antec SmartPower 2.0 450W
Any problem with this rigg and PSU?
edit:
Dound this post that it said the board do need -5V and now Im confused?
http://www.archivaty.net/forums/about12964-30.html

TS4036 I've got a new iPad I'm trying to do an iCloud back up but keep being given the following message: no iCloud backups are compatible with the version of iOS (6.1.3) on this iPad. How do I restore I cloud on my new device?

I've got a new iPad and am trying to do an iCloud backup but keep getting the following message: no iCloud backups are compatible with the version of iOS (6.1.3) on this iPad.
How do I restore info from iCloud onto my new device?

You would have to update your device first, before you can restore your iPad from your backup. Resolution: set it up as anew device, then update your device to the latest version "Settings > General > Updates", then reset your device again "Settings > General > Reset > Erase All Content and Settings" and then after the iPad restarts again, choose to restore your device from your backup.

I accidentally deleted Garageband on my MacBook Pro, version 10.6.8. The new version of Garageband is only compatible with 10.9 and above. Is it possible to still get the older version? OR, can I get another copy of the startup CD for my computer

I accidentally deleted GarageBand on my MacBook Pro, version 10.6.8. The new version of GarageBand is only compatible with 10.9 and above. Is it possible to still get the older version? OR, can I get another copy of the startup CD that came with my computer so that I can reinstall GarageBand?

The new version of GarageBand is only compatible with 10.9 and above.
If your Mac can run MacOS X 10.6.8, it probably can be upgraded to Yosemite, if you don't have to stick to Snowleopard for other reasons.
Is it possible to still get the older version?
Amazon or eBay are still selling iLife '11 installer disks, and you could reinstall GarageBand from these DVDs. But it will be expensive.
Have you checked your backups, if you can restore GarageBand from a backup?
OR, can I get another copy of the startup CD that came with my computer so that I can reinstall GarageBand?
Sometimes the AppleStore Support will replace missing installer CDs for a fee.

Unable to refresh the schema of FIM MA.Getting an error in Event viewer ""the current version of database is not compatible with the one expected by Forefront Identity Manager service. The current version of database is : 1116. The expected version is :1"

Hi,
We have installed FIM MA with an account that have all the sufficient rights.It got created successfully and worked for Full Import and Full Sync. But, due to some version incompatabilities, we have installed a patch.PFB link for the patch.
http://support.microsoft.com/en-us/kb/2969673/en-us
Now, we are trying to refresh the schema of FIM MA. While doing that we are facing an error "Failed to connect to database". The user account with which we are connecting has read and write permissions on DB.In the event viewer some errors are
logged like "the current version of database is not compatible with the one expected by Forefront Identity Manager service. The current version of database is : 1116. The expected version is :1122" with event ID 3. PFB images for more detailed
view.
Please advice how to fix the issue.
Thanks
Prasanthi.

Hello,
seems to me that you maybe only updated the syncengine but not portal/webservice.
I had that error once after an recovery from scratch and forgot one of the hotfixes to apply to all services.
-Peter
Peter Stapf - ExpertCircle GmbH - My blog:
JustIDM.wordpress.com

I just got an iPhone 4 as an upgrade from the original iPhone 3. I came home and tried to sync it with my iTunes and it says I need to upgrade my iTunes to work with the 4. The current version of iTunes isn't compatible with my G5 mac?????

I just got an iPhone 4 as an upgrade from the original iPhone 3. I came home and tried to sync it with my iTunes and it says I need to upgrade my iTunes to work with the 4. The current version of iTunes isn't compatible with my G5 mac????? Help

Return it.
The requirements are on the box and on the website:
Mac system requirements
Mac computer with USB 2.0 port
Mac OS X v10.5.8 or later
iTunes 10.1 or later (free download fromwww.itunes.com/download)
iTunes Store account
Internet access
http://www.apple.com/iphone/specs.html

Problem with multiple sub-panels through Enum case structure: "The VI is not in a state compatible with this operation"

Hello,
I am using LabVIEW 8.0 and I am attempting to create a sub-panel that displays the front panel of a sub-vi depending on the selection made by the user via the Enum dropdown menu. I have wired the Enum to a case structure and applied identical coding to each individual case structure except for obviously changing the sub-vi source. However, I receive an error "The VI is not in a state compatible with this operation." I was able to successfully make a single sub-vi work within a sub-panel using a true/false case structure and the exact same coding. However, now that I am using an Enum box wired to a case structure, I receive this error. I have attached my block diagram as well. Could anyone assist me as to where it is that I am going wrong?
Thanks in advance!
Solved!
Go to Solution.
Attachments:
enum subpanels.JPG ‏22 KB

torm wrote:
I have attached my block diagram as well
I only see a picture. Can you attach the VI instead? At what point do you close the reference?
torm wrote:
I have wired the Enum to a case structure and applied identical coding to each individual case structure except for obviously changing the sub-vi source.
Well, if the code is identical except for the source, only the source should be inside the case, right? Why duplicate code?
LabVIEW Champion . Do more with less code and in less time .

Firefox was working, today did not start with error message the the version of this file is not compatible with the version of windows you're running.

Computer has Windows 7 Ultimate 64bit. Firefox has run fine for over a year on this computer. Nothing was changed or updated except Windows update shows that it installed updates on Aug 19. I had computer off for week before because out of town, came back and started on Aug 18, but Firefox worked on that day. Did not use FF again till today. Today on Aug 22nd, firefox will not start, shortcut icon has changed to program not there. Exe in folder when clicked brings up error message say the version of this file is not compatible with version of Windows I am running. Firefox exe shows created Aug 20. I suspect update, either Windows or FF but lean towards windows, happened that broke things. I notice IE 10 updates, .NET framework updates and malicious software removal tool updates were installed. I have tried restarting computer, did not fix. Tried to run as admin, didn't work. I do not want to uninstall FF unless have to because of all the stuff I have in there, bookmarks, last pass passwords, etc.

Hello,
Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files ('''not the profile folder where the bookmarks are stored''') and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!
Thank you.

Is the Hiper Type- R 580 modular PSU compatible with MSI K8N SLI Platinum?

Similar Messages

Maybe you are looking for