Is the internal hard drive (PB G4 1.7GHz) a user replaceable part?
n/t
Well, I wouldn't say a straight up, "NO!", but you do have to have a bit of prior knowledge and experience to do it. Here are a couple of links to give you an idea what is involved. However, please remember, one slip and it is all over!
PB take apart - http://www.xlr8yourmac.com/systems/PBG4_15_AL_takeapart/AL_PB_G4take-apart.html
Another one - http://www.bit-tech.net/bits/2005/10/21/powerbooktakeapart/1
Powerbook Medic repair videos - http://www.powerbookmedic.com/Take-Apart-Repair-Manuals-p-1-c-258.html
Good luck!
Similar Messages
-
How to move an iTunes library from the internal hard drive to another bootable disk.
I got two Mac OS X installations on my i Mac system. One on the internal hard drive (320 Gb), that has been there since the iMac was bought 3 years ago, upgraded to Lion on 2 August. (call that INT) . I have a USB external drive, and recently bought a firewire Lacie external drive (2Tb), so to boot from there when I can, with hard drive space getting tight this year. I successfully installed another copy of Lion on LACIE.
Then I went to work to transfer my iTunes library, which the media files were optioned to store on the USB drive. Intending to transfer both the music and video files, and the megadata ( playlists, ratings, playcounts ) I found the media files and the iTunes library file and the .xml document in my iTunes folder from INT. I made a new folder in the USB drive, and copied the contents from the old iTunes folder to that new folder. I re-started in LACIE, and found my empty iTunes folder. I copied over to the new iTunes folder, then opened iTunes. My eyes saw the music library to the same number of items, with the playlists etc showing.
However, I tried to sync an iPod Nano, and a window came up saying 100 songs could not be copied to the iPod because they could not be found. After ejecting the iPod I tried to play a song from iTunes, and the screen filled with exclamation points. A small window came up, asking for a password to open "sparsebundle" and my name. I entered my password for the administrator's log-in and it said try again with the password. Without knowing what password to put in, I clicked Cancel, and got another small window asking to locate the file. Then clicked Cancel again, not knowing where to search. All the media folders were showing after quitting iTunes and opening Finder .
I re-booted into INT, and opened iTunes. The library was still there. I synced my iPod again, ejected it, played 3 songs on the iPod, synced again, ejected it again, and opened the playlist "Recently Played". It showed up okay with no problems. So my iTunes library in INT is alright.
Has anyone got any idea how to make the transfer into LACIE and get it running alright, or what went wrong with what I did ?
In the meantime I will empty my LACIE iTunes library folder's contents to the trash, and securily empty the trash .Solved the issue without using the trash . I tried to consolidate the library in LACIE, then clicked on any exclamation-mark song and tried to locate the file. Repeating those steps 3 or 4 times cleared it up. That was confirmed when I synced the entire library on a iPod Classic, and showed up no problems after syncing the Nano.
What went wrong was perhaps to fail to consolidate the library at first . -
I have a new MAcBook Air and my photos don't fit on the internal hard drive. I want to store my photos on an external hard drive which I will connect to my Air when using Iphoto. How do I set an external hard drive as the default drive in Iphoto?
Make sure the drive is formatted Mac OS Extended (Journaled)
1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
Regards
TD -
I've lost the use of Appleworks by upgrading to 10.9.2.
Is it possible to partition the internal hard drive of my MacBook Pro and install an older Mac OS (10.6.8) on the second partition with OS 10.9.2 on the other? I'd like to be able to boot to the older OS when I need Appleworks and few other applications that aren't available on OS 10.9.2.
Any suggestions?
Thank you for your help.Hello again, WZZZ,
Here's an update. I was successful in creating two partitions on my internal drive, and in installing OS 10.6.6 on the second partition, as per your guidence. I now have it up to 10.6.8 with all the security updates and AppleWorks. A great thing.
Some thoughts:
• The partitioning had one hitch; it failed at first. But once I "repaired" the disc with Disc Utility the partitioning went thru.
• The partitioning took a long time in 'resizing the partition.' A few hours I think it was. Lots of progress bar watching.
• If I had it to do again, I'd size the two partitions differently. My original data was occupying about 230 Gb of the 320 Gb disc. I made the new partitions share the space, about 230 and 75Gb. That left very little available space for the main disc. I ought to have put some breathing room in there. As it is, it's an incentive to clean up all those files, especially all those iTunes files. I now have about 10% of available space there and mean to continue deleting.
So, all in all a good project that got me where I wanted to go. Thank you for your help.
Appreciatively,
wallah -
I have a Power PC G5 computer that I will soon be replacing with a current i5 or i7 Mini. How do I transfer the Time Machine files from the internal hard drive on the G5 to an external drive that I will later use with the Mini?
Hi, likely the easiest is to just poll the drive & get something like this...
Get MacScan...
http://www.apple.com/downloads/macosx/networking_security/macscan.html
http://eshop.macsales.com/item/NewerTech/U3NVSPATA/
But if you have a good external drive already, just clone it.
Get carbon copy cloner to make an exact copy of your old HD to the New one...
http://www.bombich.com/software/ccc.html
Or SuperDuper...
http://www.shirt-pocket.com/SuperDuper/ -
Can I clone and transfer from the internal hard drive to an external hard drive ?
I got an intel duo iMac, the machine is very good even if it is almost 3 years old. But with the internal hard drive having 320 Gb I am running out of hard drive space. I have looked into changing the internal hard drive but that involves having to send the machine away to have that done. So I was wondering if I could just transfer all the Mac OS X and all the applications and settings within three user accounts to say a 2 TB external hard drive, and boot from that, using cloning software.
Alternatively, is there a way to transfer the iPhoto and iMovie libraries to an external hard drive. That would free up space. I do not know how, if that is possible, although I have managed that with iTunes. My iMac is running Snow Leopard.
Regards from John5801John,
USB should be fine for general computer use, but media may add a little too much for the sustained rate that USB2 provides. In a previous career I did a lot of video editing. Firewire was much preferred in that task because of its stability at higher rates. I can see why the SuperDuper! people might suggest it.
When I cloned the wife's iMac, I had replaced the HDD on the MacBook Pro with a USB pocket drive that I've kept the original MacBook's installation mounted on. I've booted directly to that external drive, so you should be okay if you can make the clone across the USB. When I cloned the wife's machine I booted the MacBook Pro with a fresh HDD in Firewire target mode and connected it as an external Firewire 800 drive. Firewire 800 is much faster, but you'll need the cable and everything to be right.
Firewire has a better reputation among people running a lot of media from their drive. I would suggest that you try and get an external drive kit that can support both. I think your iMac supports both firewire 400 AND firewire 800 along with the 3 USB2 ports. I'm guessing based on my wife's 24" imac. The fastest would be the Firewire 800, but that standard is about to be pushed aside in both cases.
Hope that helped. -
The internal hard drive on my early 2009 24" iMac is nearly full. I have already worked to free as much space on the HD as possible. How do I add an external HD and have the iMac read it as though it was part of the internal HD. I know about external HD for additional storage and I do have an external HD, but, it is so much easier to search the drive when it is internal than having to perform a search on the internal drive and then a search on the external drives. And, it is easier to save files to an internal drive so that I don't have to decide which external drive to use to save files. In other words, I want to add an external HD and have it function as though I had purchased a larger internal HD.
That is simply not possible. Every drive is a separate device. It cannot be used to extend an internal drive as though you had a seamlessly larger drive.
What you can do is to create a striped RAID array using the internal drive and an external drive. However, doing this will erase the internal drive and you will lose everything on the internal drive. Furthermore, installing Lion or Mountain Lion becomes a bit of a problem because you cannot create a Recovery HD on a RAID and this tends to make the installer choke. However, you can clone an existing Lion or Mountain Lion system to the RAID and designate the RAID as a startup volume.
I would not recommend the RAID solution, personally, but there are many who do. I prefer the basic solution of spending the money on a larger internal hard drive instead of an external hard drive.
RAID Basics
For basic definitions and discussion of what a RAID is and the different types of RAIDs see RAIDs. Additional discussions plus advantages and disadvantages of RAIDs and different RAID arrays see:
RAID Tutorial;
RAID Array and Server: Hardware and Service Comparison.
Hardware or Software RAID?
RAID Hardware Vs RAID Software - What is your best option?
RAID is a method of combining multiple disk drives into a single entity in order to improve the overall performance and reliability of your system. The different options for combining the disks are referred to as RAID levels. There are several different levels of RAID available depending on the needs of your system. One of the options available to you is whether you should use a Hardware RAID solution or a Software RAID solution.
RAID Hardware is always a disk controller to which you can cable up the disk drives. RAID Software is a set of kernel modules coupled together with management utilities that implement RAID in Software and require no additional hardware.
Pros and cons. Software RAID is more flexible than Hardware RAID. Software RAID is also considerably less expensive. On the other hand, a Software RAID system requires more CPU cycles and power to run well than a comparable Hardware RAID System. Also, because Software RAID operates on a partition by partition basis where a number of individual disk partitions are grouped together as opposed to Hardware RAID systems which generally group together entire disk drives, Software RAID tends be slightly more complicated to run. This is because it has more available configurations and options. An added benefit to the slightly more expensive Hardware RAID solution is that many Hardware RAID systems incorporate features that are specialized for optimizing the performance of your system.
For more detailed information on the differences between Software RAID and Hardware RAID you may want to read: Hardware RAID vs. Software RAID: Which Implementation is Best for my Application? -
I'd like to be able to send files to both the internal hard drive and an external hard drive as I'm shooting tethered in Lightroom. Can this be done and if so how? Thanks.
Welcome to Apple Support Communities
OS X can only restore data to the drive where Time Machine backed up files from.
If you want to restore files from the Time Machine backup onto an external drive, your only option is to access to the Time Machine drive manually (open a Finder window and choose your Time Machine drive in the Finder sidebar), navigate through its folders and copy the files you want to the external drive -
iMac, Model Identifier iMac12,1 with 121.5" screen, 2.8 GHz Intel Core i7 processor, 8 GB 1333 MHz DDR3 memory, 1 TB internal hard drive, running Snow Leopard 10.6.8 from internal drive.
I want to install Yosemite onto a 1 TB external hard drive (OWC) , and keep Snow Leopard installed on the internal hard drive. I want to be able to boot from either system, depending upon circumstance (at least until Yosemite is stable). Is this possible?It is possible. I'll let you read some articles that cover the setup:
Starting from an external USB storage device (Intel-based Macs) - Apple Support
or
http://osxdaily.com/2013/06/22/boot-mac-external-drive/ -
When I try to use the internal hard drive as a scratch disk I get this error "unable to set scratch disk- the selected directory is on write protect or non-writable media. Any ideas on how to fix this. It only happens in fcp.
By internal, I assume you're referring to your systems (boot) drive. Is it, by chance, a partitioned dive?
Also…although many people successfully use their systems drives as scratch disks, over time you'll have better results using a dedicated drive for your media.
Good luck.
Russ -
After a startup problem with my macbook pro i put it as slave and formatted the internal Hard drive. Now i want to install OS X Mavericks from USB
How can i do that?What did you "put as slave?" What Mac model do you have, exactly?
-
Maximum size for the internal hard drive
I have an Intel based 24" Imac. As soon as my Apple care runs out I want to replace the internal hard drive with something larger. Does anyone have information on the maximum size I can install?? I currently have 320gb, but am looking to increase to 1tb but I don't know if my Mac can handle it.
1TB will definitely work as this was even a build to order option when it was for sale. I'm pretty sure as long as you're not using FAT32 whatever size you put in should be compatible.
-SM -
Is it possible to increase the internal hard drive capacity of my 500GB time capsule?
I have a 500GB time capsule bought 2008. I am now backing up two laptops to it, a macbook pro and a macbook. It is likely that soon their combined data will outstrip the capacity of the time capsule. (I increased the internal hard drive capacity on the macbook recently to 640GB).
Is it possible to add to the internal hard drive capacity of the time capsule? If so, do I just source extra capacity from a third party supplier as I did for the new hard drive for the macbook?
Any experience or advice appreciated.It's possible to pull the hard drive from the Time Capsule case and replace it with a larger capacity drive, but you might want to keep in mind that since Time Machine will "see" this as a "new" drive, it will make a complete backup of both computers to start and then backup incrementally after that.
If you were thinking of transferring the existing data on the 500 GB drive, that is possible as well.
But, you will not be able to tell Time Machine to simply continue backups to those same files. For that reason, it might make sense to look for a separate drive enclosure to install the "old" drive in case you need access to your older Time Machine backups.
After a few months, you may decide that you really don't need all the old Time Machine backups on the old driive and you may decide to simply erase the drive and use it as a spare. -
How can I restore my stystem to factory settings if I replaced the internal hard drive
My computers been runing slow and its time for a factory reset. I only use the computer really as a media center hooked up to my tv since I built my desktop a year or so ago. I already copyied everything I wanted to keep off the laptop. A year or so ago I had to replace the internal hard drive because there was a problem with it. i don't have a restore disk and the partictian didn't get copied to this hard drive. how can i restore to factory settings? the computer is a toshibia qosmio x 505 q885.
Qosmio X505-Q885
If you failed to burn recovery discs, you can obtain them from Toshiba at Get Recovery Media here.
For instructions, see the section Restoring from recovery DVDs/media, which begins on p. 70 of the User's Guide.
Qosmio X500 Series User’s Guide
-Jerry -
Why won't my Intel iMac boot up, either from the internal hard drive or the DVD drive? It just displays a light grey screen, without any other icons, etc. The fact that it won't boot from the original system DVD is what baffles me the most. Any ideas? It uses the latest version of Mavericks. Thanks!
If the C key for Install Disc or R Command for OS X Recovery startup commands are not working, try holding the Option key for the Startup Manager.
see > Startup Manager: How to select a startup volume
If that does not work and you using a wireless keyboard, it may have become unpaired and you need to dig up a USB keyboard to invoke the startup commands.
For more on gray screen, see > Mac OS X: Gray screen appears during startup
Maybe you are looking for
-
Hi all, i need to create multiprovider combining cube and ods. i created MP and when i view the data in listcube, data is populated from cube . ods data didnt populated in MP. eventhough i mapped common chars from two infoproviders MP, data is not po
-
Firefox loses my tabs and tab groups
I closed down my system normally last night. Firefox closed down. When I started up Firefox this morning all of my tabs and tab groups had gone - AGAIN! Firefox has done this to me several times and I have never been able to recover my tabs and group
-
My ipod has hide a app and I can't delate it. What do I do?
I've just updated to ios 6 beta 4 and it hid a app and I can't delate it
-
create or replace package body test_data is V_STARTDATE DATE; PROCEDURE CATEGORY_EXPORT aS cursor C1 is select expdate from local_Category_Data loc; end category_us_export; end test_data; gives error "encountered the symbol end when expecting the fol
-
Timing: labview time seems to come in bursts
I'm trying to sample some voltage signals at around 100-1000 Hz (using a PCI-6229) and simultaneously correlate these samples against an absolute time. So, for example: 0.001 s, +1.0 V 0.002 s, +1.1 V 0.003 s, +1.2 V 0.004 s, +1.3 V 0.005 s, +1.4 V .