Is the iPad 30pin cable different from the iPod/iPhone 30pin?

I'm just trying to figure out if I need a special 30pin cable or if it's only the 10W wall unit that the iPad requires. Thanks!

The original iPads used the same 30 pin cable as the original iPhones and iPods.
New ipads are using the Lightning cable as are the iPhone 5s.

Similar Messages

In the info bar at the bottom of the iphoto window, why is the number of items different from the total

In the info bar at the bottom of the iphoto screen, why is the number of items different from the total?

What version of iPhoto and system are you running? What mode are you in, i.e. Events, Photos?
If it's the Photos mode the number at the bottom will represent the number of photos displayed in that mode or the number of photos selected in that mode. The number will match the number next to the photos mode only when there are no photos in that mode that are selected.
If you click on the Events icon and then back on the photos icon the numbers should match.
OT

If i delete photos from the iPad, do they erase from the iPhoto albums in my computer too?

If I delete photos from the iPad, do they erase from the iPhoto albums in my computer too?

No. The photos will remain in iPhoto on your computer. You are just deleting them from the iPad.

While executing the query the output is completey different from the query

Dear friends,
We built a query and loaded the data for that infoprovider.
While executing the query the output is completey different from the query what we have built.
Output has no relevance to the query.
Kindly help the same.
Regards,
Sathya

HI Satya,
In my opinion the issue is with your front end.
Results should be identical in RSRT, BEx Analyzer (Workbooks) and the ABAP-Web since all three frontend tools use the "ABAP Runtime layer".
It may differ In the Portal where the new "Java Runtime layer". (Java-Web.) is used.
This is given in OSS Note 1296576 - Different Query Behaviour: ABAP - Java.
So i think the problem lies in your analyser. If you are using Analyzer: BI Add on 7.X (Based on 7.10) try and get support package 8.
Hope this helps.
Thanks,
Rahul

How can i AppendText to richTextBox only if the text is new(different) from the text that is already in the richTextBox ?

Code
public void ScrollNews()
listsext.Ext(page);
combindedString = string.Join(Environment.NewLine, ListsExtractions.myList);
richTextBox1.SelectAll();
richTextBox1.SelectionAlignment = HorizontalAlignment.Right;
richTextBox1.AppendText(combindedString);
scrollerText = string.Join(Environment.NewLine, ListsExtractions.myListWithoutLinks);
scroller1.TextToScroll = scrollerText;
if (NewsLevels.newsLevel && NewsLevels.shouldStart)
UpdateTextControls();
scroller1.Start();
NewsLevels.shouldStart = false;
if (NewsLevels.newsLevel == false && NewsLevels.shouldStart)
UpdateTextControls();
scroller1.Start();
NewsLevels.shouldStart = false;
string[] rlines = richTextBox1.Lines;
richTextBox1.SelectionStart = 0;
richTextBox1.SelectionLength = rlines[0].Length;
richTextBox1.SelectionColor = Color.Red;
richTextBox1.Select(rlines[0].Length, rlines[1].Length + 1);
richTextBox1.SelectionColor = Color.Green;
RedColorAlert1();
if (lines == null)
label5.Text = "0";
else
label5.Text = lines.Length.ToString();
The line is:
richTextBox1.AppendText(combindedString);
I'm calling this method ScrollNews every X minutes with a timer.
The way it is now it will AppendText all the time. But i want it to Add the combinededString only if the text in combindedString was different from the text that is already in the richTextBox. Somhow to keep all the time the last text and compare it and
if there is a new text then appen it.

public void Scroll()
listsext.Ext(page);
combindedString = string.Join(Environment.NewLine, ListsExtractions.myList);
richTextBox1.SelectAll();
StringBuilder sb = new StringBuilder();
sb.Append(combindedString);
richTextBox1.SelectionAlignment = HorizontalAlignment.Right;
richTextBox1.AppendText(combindedString);
The problem is that now it will keep adding to the richTextBox the content in combindedString over and over again. I need somehow to check each time if the content in combindedString already exist in the richTextBox if not meaning it's new content then AppendText
it.
If it's the same already exist do nothing don't add it.
EDIT
I write to a text file the content of the ombindedString variable .The first content the lines is the combindedString:
המשטרה עצרה אמא ל2 ילדים קטנים שבעלה נעצר בחשד למעורבות בעלה בכריתת עצים
15:03 דווח במקור בתאריך : 09.03.15 : שעה
http://rotter.net/forum/scoops1/189935.shtml
אדם החשוד בעבירת מין בקטינים נעצר לאחר שהתלונן על 2 שסוחטים אותו על רקע מעשיו
14:50 דווח במקור בתאריך : 09.03.15 : שעה
http://rotter.net/forum/scoops1/189932.shtml
אינדונזיה: 5 הרוגים בקריסת האנגר בנמל תעופה
14:44 דווח במקור בתאריך : 09.03.15 : שעה
http://rotter.net/forum/scoops1/189930.shtml
אום אל-פחם: מספר חשודים עוכבו בחשד למעורבות במימון טרור
14:04 דווח במקור בתאריך : 09.03.15 : שעה
http://rotter.net/forum/scoops1/189914.shtml
אלמנתו של רפ''ק ג'דעאן אסעד, שנרצח בפיגוע הדריסה, ילדה בן
13:05 דווח במקור בתאריך : 09.03.15 : שעה
http://rotter.net/forum/scoops1/189884.shtml
תנאי ליברמן לכניסה לממשלה עונש מוות למחבלים חובת חתימה על מסמך נאמנות
12:39 דווח במקור בתאריך : 09.03.15 : שעה
http://rotter.net/forum/scoops1/189868.shtml
תלמיד תיכון מרחובות חשוד שהפעיל מעבדה ביתית לזיוף תעודות זהות ואישורי מחלה
12:03 דווח במקור בתאריך : 09.03.15 : שעה
http://rotter.net/forum/scoops1/189856.shtml
הצביעות של רענן שקד: האשים את אמהות 3 החטופים ומגנה את חגי הוברמן
11:43 דווח במקור בתאריך : 09.03.15 : שעה
http://rotter.net/forum/scoops1/189848.shtml
And this is a screenshot i couldnt copy the text of the richTextBox1.Text
richTextBox1.Text content image
co uld be that the format of the text in the combindedString and the richTextBox1.Text looks different so it think it's not exist ?
Update:
Not sure if it's important but the combindedString i'm adding the text to it from the variable ListExtractions.myList
myList is List and i build this List like that:
private void ListToStringList(List<string> myl)
for (int i = 0; i < AllNews.Count; i++)
myl.Add(AllNews[i].text);
IFormatProvider provider = CultureInfo.InvariantCulture;
DateTime myTime = DateTime.ParseExact(AllNews[i].original_time, "DyyMMddTHHmm", provider);
string results = myTime.ToString("HH:mm דווח במקור בתאריך : dd.MM.yy : שעה");
myl.Add(results);
myl.Add(AllNews[i].link);
myl.Add(Environment.NewLine);
myListWithoutLinks.Add(AllNews[i].text);
myListWithoutLinks.Add(results);
myListWithoutLinks.Add(Environment.NewLine);
for (int i = 0; i < myl.Count; i++)
myl[i] = Regex.Replace(myl[i], @"\t|\n|\r", "");
And use it:
ListToStringList(myList);

TS3999 my entries typed on my iphone do not transfer to the ipad calender but works from the ipad to the iphone. what am i doing wrong?

help, when i create a new event on my Iphone4 calendar it does not show up on my Ipad. It does work from the Ipad to the Iphone4. I am using Icloud and Icloud backup.

Hi there LovelyLily,
You may find the troubleshooting steps in the article below helpful.
Resolve issues with an over-the-air iOS update
Not enough space to update
If your device doesn't have enough space to download and install the update, you can use iTunes to update your device.
-Griff W.

More ? On finding the iPad. It appears from the responses that I cannot practice on finding my iPad, from my iPad! I need another iOS device. Yet at another iOS device what do I type in tins my iPad? Everything is installed, ON, operative. Ok?

Aaaarrrrgggghhhh! I'm on a learning curve using this chat room!
Ok, the header became most of my question above.
I have installed the finder
In settings>iCloud>finder. Is ON
I appear to not be able to practice a " find " from my own iPad.
I need someone else's iPad or iPhone that also has fine my iPad/iPhone ?
But then I would only get the same circle that I have now....please install finder etc turn it on etc on their device.
I do not see from any literature or advice how I actually locate a lost or misplaced device.
Thanks for the responses so far.
Peace
Gene

1. It is never a good idea to include personal info like your email address or Apple ID in a post on an open forum.
2. The email you received DOES NOT say your Apple ID cannot be used to unlock this iPad. The email informs you that your Apple ID was used to unlock an iPad. Fortunately the iPad is yours. The message confirms that. If your Apple ID was used to unlock an iPad that was not yours your would then know to change your password. Since the iPad is yours you do not need to change your password.
Is your iPad working?

Key Figure values in the Bex Report are different from the cube

Hi all,
When I tried to pull data of the cube, the values of the Key Figure 0Lotsize_cm was showing 100 EA. But when I try to run the query of the cube, then the key figure is LotSize is showing up as 500 EA. I don't understand why this is happening.
When I checked for Aggregation in the Key Figure. It shows up as "Sum" under aggregation and "Last Value" under Exception aggregation.
Could some one help me find a solution to this issue.
I look forward to hearing from the experts.
Regards,
S.P

Hi Arun and Zegion,
Thank you for your responses.
Arun, I do not have any aggregates on the cube. I changed the aggregate properties of the Key Figure from SUM to Minimum. this has solved my problem temporarily.
the reason I am saying temporarily because this is a SAP delivered InfoObject. This is for the datasource 0CO_PC_PCP_01. When I read through the documents, it said, SUMMation for Aggregation and Last value for "Exception Aggregation" will display the value of KF as the last value and does not add them up.
Since this wasn't the happening in my query, I changed the Aggregation from SUM to Minimum.
Regards,
S.P

Why is the Application Tab so different from the rest of iTune?

It feels like the Applications tab is not from Apple. Is it done by a outsourcing company in China? There is no consistency between this tab with the rest of iTune. Is there a design theme across all parts of iTune? Why there is no list view for the Apps?
One thing I miss much is the ability to check off an App so that it will not sync to my iPhone. The same way that I can decide with song go to my iPod. Since the iPhone only has 144 slot for applications, it is important to have such selection ability. The other thing I miss is the rating. I'd like to rate the applications so that if I have purchased more than one version of the same kind of app, I can choose which goes to my iPhone based on my own rating. I also want to be able to sort the Apps by category in the list view. How about folders that each corresponds to one page on the iPhone? The way to reorganize the Apps icons is just a pain after you have more than a few pages.

Hi LaiPod
These are good suggestions, I suggest sending feedback to apple via: http://www.apple.com/feedback/itunesapp.html
J.C

There is a serious problem in the iBooks when loadin an Arabic book the page and the letters are very excellent but on turning the pages the pages will be different from the original book. It means that if you want to read the book the arrangement of

I have a problem with the application iBooks when I read an Arabic book the pages are misarranged in all the Arabic books. You can try it yourself just load an Arabic book and try to read it you will not find the pages the same like the original book you will have to turn many pages forward and back to get the true arrangement of the original book. This problem is not found in stanza or kobo inspite of the fact that the iBooks look is better

You will just have to use other apps for Arabic. You can ask Apple to fix this via
http://www.apple.com/feedback/
I think Apple's iBookstore does not yet really support Arabic books.

Why was the Apple Lightning Cable removed from the website?

I check everyday for its availability so I can order one, and it always says "coming soon". Today, it isn't even there.
Does anyone know why it was removed, and when the HELL they are goign to get some!?

Hello Perplex!
As an Apple user and someone who is looking forward to purchasing his iPhone 5, I’ve been waiting for the Lightning cable to be put on BestBuy.com. Thanks much for posting that it is available. I’ll be sure to let my fellow iPhone users know that it is available!
Also, those Reward Zone Certificates come in handy, eh?
Cheers!
Apple® - Lightning to USB Cable
Model: MD818 | SKU: 6652043
Use this Lightning to USB cable to charge and sync your iPhone 5 or iPod with a Lightning connector to your Mac or Windows PC. Works with the Apple USB power adapter (not included) for convenient charging from a wall outlet.
5 Read reviews (4)
Sale: $19.99
Alex|Community Connector | Best Buy® Corporate
Private Message

Is the numbers for laptop different from the numbers app?

Am I right in thinking that Numbers I have for my MacBook cannot be transferred to my iPad? Do I need to buy the app? Is it any good?

You are correct. There are different versions for Mac OS and iOS. You 'need' to buy it on your iPad if you have a requirement to open Numbers format files which you obviously do.

Font of alpha list bullets is different from the bullet text

TCS3/FM10/RH9
Windows XP
I have several alpha lists and the font of the alpha bullet is different from the font of the alpha bullet. How do I change this in CSS?
Thanks in advance.

William,
Rather than make the change in the project, I would rather make the change in the stylesheet. I was aware of the multiple stylesheets and use the old fmstyles.css to govern the project.
How would I make this change in the stylesheet?
Thank you so much for your help.
Mary

Mapviewer displaying maps differently from the client than from the server

Can anyone explain to me why this is happening. I have been deploying my java server page to the server, and the way it works is to have multiple base routes which are not originally shown, but the user can 'check' them and they will display. On the server this works as one would expect, but on the client
I originally couldn't get this to work through Jdeveloper, but now it works -- that's another story :(
all of my base maps are displayed when the map first comes up. I don't want this to occur because it takes too long. Anyway, does anyone know why the map is working different from the client than it does when I deploy it to the server? Here is the significant code:
var basemap1 = new MVBaseMap("ds_prod.prod_rdlg_qry");
var basemap2 = new MVBaseMap("ds_prod.interstate", "", true);
basemap2.setTransparent(true);
var basemap3 = new MVBaseMap("ds_prod.primary", "", true);
basemap3.setTransparent(true);
mapview = new MVMapView(document.getElementById("map"), baseURL);
mapview.addBaseMapLayer(basemap1);
mapview.addBaseMapLayer(basemap2);
mapview.addBaseMapLayer(basemap3);
basemap1.setVisible (true);
basemap2.setVisible (false);
basemap3.setVisible (false);
Any suggestions would be appreciated. Thanks.

Hi
Whitch version of mapviewer are you using? (MVBaseMap/addBaseMapLayer is for older versions, and in newer there is MVMapTileLayer/addMapTileLayer)
I had similar difficulties displaying multiple tile layers in application with mapviewer ver. B080618. (not sute, may be in newer versions this works different)
When adding all tile layers initially and then setting theig Visible properties, browser fetches from server data for ALL the layers (even if they were set to visible -> false)
the workaround was to add aditional layers ony when this is needed.
Michael

PERSG previous bet different from the current PERSG using info-type pa0000

Hi Friends,
Please guid me how get the PERSG previous bet different from the current PERSG
using info type pa0000.
Regards,
Durga

Folks,
even after having repaired the inbox folder under "properties" a few times, I still had some e-mails where the contents are different from the subject line.
In other words in the inbox there are two e-mails: one with subject line "abc", and another one with subject line "def".
When I display the e-mail with the subject line "abc", the contents are from the e-mail with the subject line "def" in the in-basket.
What else can be done to correct this problem?
Thanks and best regards.
Fred Kunz-Shirzad
Chemin Ronzeures 6A
1297 Founex VD
Switzerland
[email protected]

Is the iPad 30pin cable different from the iPod/iPhone 30pin?

Similar Messages

Maybe you are looking for