Is the ipad screen sensitive for burning when you do not use the lock function

I want to have the ipad directly accessible at all times. Setting the lock function to 'never' allows this. Now the apps on the home screen are displayed continuously. Will this affect the screen like it was on tv and computer that after a while you see 'imprints' of those apps on the screen, called 'burning'?

1Password from Agilebits will sync changes across your Mac and iOS devices using either iCloud or Dropbox.

Similar Messages

How do you leave your iMac when you're not using it?

Just curious..
Hey All..
I have a 24" iMac 2.8 with a 750GB Hard Drive. I tend to leave it on all the time shutting it down over night probably once a week. I have my settings to turn the display off after 5 minutes and turn off the hard disks "when possible". I just wondered if this was healthy or will it shorten the life expectancy of my pride and joy? I must admit that I do like to leave it on all the time. I leave my Time Capsule on all the time too...should I perhaps shut this down also?
I have the Applecare program which gives me some piece of mind with my iMac.
I'd be delighted and interested to hear how you all 'leave' your iMacs when you're not using them.
Kind regards..
~RICKY

I have my system plugged into a UPS and generally leave it sleeping. There's a window where I have it scheduled to wake up and then sleep again, but it I otherwise sleep it.
I suspect that sleep probably puts the least wear on your machine and is safe if you have a UPS. FWIW, an early 2007 24" iMac draws 3W of power when it's off, and 10W or so when asleep ( the newer models use less than 6W). During the boot process, power consumption will go 200-220W for ~1 minute. Normal usage it consumes about 100W. Idling, the machine will use between 70-100W depending on the screen brightness, and about 45W if the display is off and machine is idle. Playing something like WoW brings the power consumption up over the 200W mark.
The mechanical parts wear proportional to the number of times they are used (physical switches), and the electronic parts wear mostly based on the the result of cycles of temperature changes / surges of voltage. Pressing the power-button to power-on the Mac probably puts the most wear on the unit as a whole. That said, under normal circumstances you are not likely to put enough wear on anything but the hard disk to have it fail.

Does logging out of Firefox when you're not using it save energy?

Have been reading about how much energy servers consume. If I log out of Firefox when I'm not using it, does that decrease the amount of energy servers are using?

If you've never replaced the hard drive, it could be slowing down - 3 to 5 years is the typical lifespan for a notebook hard drive.
Do you know how much RAM is in the computer?
If the computer mostly works OK, you may just need to invest in it a little - replacing the hard drive & upgrading the RAM will breathe new life into it, most likely!
You do not need to shut it down each time you're done using it - in fact, I leave my MacBook asleep 90% of the time and reboot it every couple of weeks or when it seems to be getting a bit sluggish. I've been doing that for the last 7 years and she's still chugging along.
~Lyssa

HT1338 just re installed my mac what is causing it to ask for password when i am not using the mac

question as above ,please help anyone,regards peter.

System Preferences/Security & Privacy/General - do you have it set to ask for a password.

I have a Mac, an iPad and an iPhone. When I contact someone using iMessage, for example using my iPad, the entire conversation also appears on my Mac and iPhone - How do I stop this duplication?

I have a Mac, an iPad and an iPhone. When I contact someone using iMessage, for example using my iPad, the entire conversation also appears on my Mac and iPhone. How do I stop this duplication?

Hello ctb4408,
With iMessage, it is meant to show up on all your iOS devices and Mac. If you do not want them to go across all your devices, then you will need to turn off iMessage on your iPad and Mac Pro.
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
Regards,
-Norm G.

My Ipad screen was "fixed" but when I use it, the screen taps random things slides onto other apps . I see people saying do a reset but it never works..

My Ipad screen was "fixed" but when I use it, the screen taps random things slides onto other apps . I see people saying do a reset but it never works. Plz help!

Hi Barry1965,
If you are having issues with the accuracy of the touchscreen on your iPad, you may find the following article helpful:
iPhone, iPad, iPod touch: Troubleshooting touchscreen response
http://support.apple.com/kb/ts1827
Regards,
- Brenden

How can I burn a copy of my project to a DVD . I do not have IDVD because I have the Lion os. I did purchase Wondershare for burning but it will not load the iMovie events or projects

How can I burn a copy of my project to a DVD . I do not have IDVD because I have the Lion OS. I did purchase Wondershare for burning but it will not load the iMovie events or projects

There is no proper substitute for iDVD.
Why is there no iDVD on my new Mac?
https://discussions.apple.com/docs/DOC-3673
UPDATE & ADDENDUM:
But even though you can still buy iLife 11 that includes iDVD 7 from Amazon, Apple now make it difficult to install:
Poster jhb21939 posted this in another thread:
“when I attempted to load iDVD into a new iMac. A notice came up on the screen stating that the 'Authorisation Licence' had expired on 25 March this year (2012).
I contacted the Apple support team and eventually, I was told that the Licence had been withdrawn and could no longer be used.”
In other words Apple are now so adamant that we don’t use iDVD that they have tried to make it impossible to install.
In response, Old Toad posted this solution:
“You can still use it one all of your Macs. If you get an invalid certificate message just set your Mac's clock to sometime before early 2011 and run the installer. After you're done reset the time back to the correct time.” He added this comment:
“It began after iDVD and iWeb were discontued and they were dropped from the Apple Store. All I can think of is the certificate was set to expire after a certain time period after the intitial iLife disc was released.
I've been able to use the installer even without setting back the date. I just clicked on the Continue button and it would work as expected. For some it would not continue unless the date was set back.”
The latest anorexic iMacs just announced do not even include a CD drive! Proof positive that Apple virtually prohibit the use of DVDs - although the newly announced Mac Minis do include a Superdrive.
Yet, they still include iMovie! Heaven alone knows or understands what you are supposed to do with your newly edited masterpiece - except make a low quality version for YouTube?

Unable to download application app will be available for download when you log into the itues store on your computer

My Ipad 2 keeps asking:-
"unable to download application 'app' will be available for download when you log into the itunes store on your computer"
If i connect it to the computer it is fine for around a week then it starts asking to be connected again, Is their any reason for this? as it is very annoying espicailly when access to a pc is difficult

There is a 20mb file size limit over 3G.
If you can connect via wifi, there is no file size limit.
If that is not what you mean, I have no idea-never heard of or seen a message like you describe.

When I use my IPhone 4S to view the Shaw Go Movie Central App when I am at home I only use WiFi which is automatic, I start watching a show and sometimes I will get a message like "you can not use your cellular for video playback" or something close to th

When I use my IPhone 4S to view the Shaw Go Movie Central App when I am at home I only use WiFi which is automatic, I start watching a show and sometimes I will get a message like "you can not use your cellular for video playback" or something close to that. Then I received an email from Telus saying I had used my 3G instead of Wi-Fi using 75% of my data. How can this happen when I'm on Wi-Fi at home? If it switched to 3G for some reason I should have been disconnected and not just transferred to 3G network using up my data. What is the fix for this??

It doesn't have to be that complicated, Verizon iPhones come unlocked, just tell VZ you're going on Holiday/Traveling and suspend the service, no need to pay for service if you're not going to be using it. Pick up local SIM cards in the countries of your choosing, pop them in, re-activate iMessage and you're set!
I recommend getting a SIM card from the Three network in England, they have great EU roaming rates and free like-home roaming in Italy.
Set your phone's region to match the country you're in, it'll save from some headaches when calling local/international numbers.
To answer your questions,
1. If you choose not to have a local SIM card, it is good to keep your phone in Airplane mode to save battery.
2. Make sure the two iPhones have different names to reduce sync/restore issues.
3. If husband has an iPhone also, you can chat with iMessage/Facetime, just give him heads up about the new number you'll have. Otherwise, use Whatsapp if he's got an Android. You can activate Whatsapp with your American number or the international number if you choose to get a SIM in Europe.
Also, Get the MagicJack app and/or Google Hangouts, both of those apps provide you with free calling to the USA and Canada using any internet connection. Google Voice is another good way to SMS across the seas.
Let me know if you need any more tips for iPhoning across the pond.

HT4914 can you download songs from itunes match from the cloud to your iPhone ie for times when you dont have internet connection

can you download songs from itunes match from the cloud to your iPhone ie for times when you dont have internet connection?

Unless you have an Internet connection you cannot access iCloud. You can download your music from iCloud to store permanently on your iPhone, but only when you have an Internet connection to do so.

I have a new iPad and tried to set up as new, then realized i needed to sign in as an existing itunes user. I reset my new ipad as new, but now when I sign in using my existing ipad it backs up to the new one I just set up. I need my itunes on new iTune

I have a new iPad and tried to set up as new, then realized i needed to sign in as an existing itunes user. I reset my new ipad as new, but now when I sign in using my existing ipad it backs up to the new one I just set up. I need my itunes account on my new ipad. help

You want to restore from the backup. Do not set up as new. You can read the article that Tom posted above, but it really is pretty simple.
Transfer any purchases from the old iPad into iTunes, backup the old iPad in iTunes and them sync one more time.
Connect the new iPad and when prompted during activation, restore from the backup that you just created and then sync with iTunes.
The new iPad should be identical to the old iPad, but you will have to enter some passwords again on the new device.
Transfer purchases.
http://support.apple.com/kb/HT1848
How to backup and restore from a backup
http://support.apple.com/kb/HT1766

SPL Screening only for a special sales organization, not the whole company?

Hi GTS Specialists,
How to set up SPL screening only for a certain customers.
Or let´s say someboday creates a customer without sales data table KNA1,
as I understand the address will be checked(without considering the sales org).
But that its wrong we want to do the check only for customer belonging
the sales org X.
So the question is how to do SPL screens only for certain customers?
Thx
Rgds

I dont know if that will work, because the customer in GTS is based on the general data from KNA1. IF there is any and which sales organisation an entry in KNVV has nothing to do with the transfer to GTS. What kind are the customers in the sales organisations you dont want to SPL check? The only reason I can see to exclude partners from spl check is, if they are internal customers, inter or intra company transfers or such business. The best would be to have different account groups for those you want and dont want to check. Next best solution is to put the customers you dont want to have checked on positive list in GTS. Another option would be to find a field in basic customer data which you are not using yet, give there different value for those you want and those you dont want to check and make the filtering in the transfer BADI or userexit by this value. BR Martin

How significant is the yellow hazard warning for pictures when creating an album using IPhoto?

How significant is the yellow hazard warning message for pictures when creating an album using IPhoto?

Are you talking about making a Book?
How siginificant depends on how low resolution the photo is and how sensative you are to poor prints - it displays when a -photo will print below 180 dpi - what is the DPI of the photos that is givingyou the warning (the photo size divided byt the pixel size)
LN

HT1386 I bought a new Mac. I previously had my iPhone and iPad synched to my PC. I can't get my playlists transferred and when I try to synch my iPad I get the following message: The iPad "name" cannot be synched. You do not have the privilege to make

I bought a new Mac. I previously had my iPhone and iPad synched to my PC. I set up iTunes but my playlists did not come over from my PC. I can redo that without a problem...BUT...I just tried to synch my iPad with my Mac and I got the following message: The iPad "name" cannot be synched. You do not have the privilege to make changes. I deauthorized my PC and have authorized my Mac...it just won't synch. Help!!

I bought a new Mac. I previously had my iPhone and iPad synched to my PC. I set up iTunes but my playlists did not come over from my PC. I can redo that without a problem...BUT...I just tried to synch my iPad with my Mac and I got the following message: The iPad "name" cannot be synched. You do not have the privilege to make changes. I deauthorized my PC and have authorized my Mac...it just won't synch. Help!!

My ipad screens apple picture keeps blinking and will not open

my ipad screens apple picture keeps blinking and will not open. I have tried pressing both top and bottom button together, pressing just the top, etc. and nothing...it just keeps blinking the apple?

Hello llp03,
Thanks for the question, that definitely sounds frustrating. The following troubleshooting assistant provides steps that may lead to a resolution:
Apple - Support - iPad - iPad Troubleshooting Assistant
http://www.apple.com/support/ipad/assistant/ipad/
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes
- Connect the device to your computer and open iTunes.
- If the device appears in iTunes, select and click Restore on the Summary pane. Learn more about restoring iOS software.
- If the device doesn't appear in iTunes, try to force the device into recovery mode.
iPhone, iPad or iPod touch: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Thanks,
Matt M.

Is the ipad screen sensitive for burning when you do not use the lock function

Similar Messages

Maybe you are looking for