Is the iPad wireless connection safe for someone with a pacemaker?

A friend of mine wants to purchase an iPad, but is worried that the wireless connection might interfere with her heart pacemaker.
Normally, with other devices,  she disables their wireless interface and uses a wired connection instead, to avoid the risk.
As I understand it, the iPad cannot be connected to the internet with a wire, only via a wireless link. Is that so?
If a wireless connection must be used, do you have any recommendations for users with pacemakers, please?
Many thanks.

KC7GNM wrote:
I believe you can connect it to a mac via usb and use the internet through the usb cable. That would defeat the purpose of it being mobile though. Like the others said I would consult a doctor and see if the wifi signals will have any effect. If she uses a cell phone those put out way more power than a typical wifi connection. That is why wifi uses less battery power than 3G
No, actually you can't. The iPad is a mobile,device with no way to connect via USB other than to synch to iTunes.
As previously suggested, the OP should advise the friend to consult her physician or the pacemaker manufacturer. However, considering that encountering radio waves of the type used for wireless network connections is COMPLETELY unavoidable is the friend has any mobility at all, I have difficulty thinking it would be an issue or a needed precaution. A quick Google search indicates a pacemaker is NOT adversely affected by wireless networks.

Similar Messages

  • I recently signed on with iCloud. I find that the prompts interrupt my workflow and the costs of this feature for someone with 200 gigs of data is not competitive. I want to cancel the mail, contacts, email, etc. without Removing data from my Mac. How?

    I recently signed on for iCloud service, but find that it interrupts my workflow too often (which I know I can reset), but will soon exceed my free storage space. I have 200 gigs of data on my local drive and frankly the cost and benefit of having ICloud access to all of it is not competitive. This particular iCloud offering is overpriced for me. I want to cancel all iCloud services but can't seem to find an easy way to do it without removing the data on my local drive, which would be disaster. Need the communities help. Thanks to all.

    Tried this, but unfortunately there was no way to cancel it even when disconnected from the NET. I'm on WIFI which I turned off.
    I keep getting a pop-up that says:
    The same message comes up when you want to cancel or remove any of the other iCloud storage functions including Contacts and Emails. This is obviously a scary thought. Why would APPLE program in this type of message? I'm already at 50% of my FREE storage on iCloud after only 2 weeks. There is no way I'm going to be held hostage by this clearly unacceptable "pay or die" programming lapse when I get to 100%. I know APPLE loves making money. Who doesn't, but this makes no sense to this devoted "Since 1984" Apple fan.

  • What are the best wireless chat headphones for walking with my iphone, i dont like earbuds

    i need something comfortable i was looking at the sennheise mm 100. any suggestions.
    thanks

    got a Nokia bh-503 which I use for running and as headset for my ios devices it works great

  • HT4356 I am trying to print wirelessly from my ipad to an epson stylus SX438W. The connection appears fine on both devices but the ipad cannot connect to the printer. It has been working fine for the past 4 months. Can anyone help?

    I am trying to print wirelessly from my ipad to an epson stylus SX438W. The connection appears fine on both devices but the ipad cannot connect to the printer. It has been working fine for the past 4 months. Can anyone help?

    Have you tried restarting the printer? Reboot the iPad as well.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • The iPad you connected is not recognized and cannot be activated for servic

    Hi there,
    Today I've received a replacement iPad (from Apple), and surprise surprise, when I connected it to iTunes for proceed with the initial setup, the following message arised
    We're sorry, the iPad you connected is not recognized and cannot be activated for service.
    We recommend you visit your nearest Apple Store for more information.
    I've contacted with my local apple support, and they told me to try to reinstall the iPad entering in DFU mode. I did it twice, and both times the procedure went perfectly but once finished the above message appeared once again.
    They have told me to send it once again for repair, but, someone knows how to resolve this ? I've sent my previous iPad ten days ago, and now, I will have to wait other ten and I'm a little bit dissapointed.
    Well, thanks in advance and merry christmas for all of you.
    julio

    They should pay to overnight pickup and overnight delivery back to you since it's their screwup. Ask them!

  • I just recently purchased the iPad wireless keyboard and I've followed all the steps, but everytime I type in the code to pair it, it says it cannot be paired. I've kept in close range, pushed the connect but it won't connect. What do I do?

    I just recently purchased the iPad wireless keyboard and I've followed all the steps, but everytime I type in the code to pair it, it says it cannot be paired. I've kept in close range, pushed the connect but it won't connect. What do I do?

    AS Tesserax said you must
    disconnect your laptop from the existing wifi network
    Connect to the default Apple Networkxxxxxxxxx - that is your AEX open network
    Go to the Airport Utility and set the AEX router to extend the Existing Network >> in the AirPort Tab > Wireless Tab >> Wireless Mode - choose your Linksys network and enter credentials - your AEX should now join the Linksys network
    Then switch back to your original wifi network and your AEX should show in the AirPort utility as well, extending the range of your Linksys network, green light on
    PS: Win XP support for WP2 authentication downright *****. Even with SP3, get ready for some "cannot connect" warnings. My Dell laptop from work would have major issues connecting to my home's AirPort WPA2. I had to downgrade to WPA at some point.

  • I don't have a wireless printer, and want to print things off of my iPad.  I know that I can use the iPad Camera Connection kit to connect USB devices like keyboards and I am wondering if I could do the same with a USB printer.

    I don't have a wireless printer, and want to print things off of my iPad.  I know that I can use the iPad Camera Connection kit to connect USB devices like keyboards and I am wondering if I could do the same with a USB printer.

    I don't think you can connect a printer since you won't have the printer drivers. I use FingerPrint from collobos.com to print to my non-AirPrint printers.

  • My ipad currently has ios 5.1.1 and won't recognize any available update for ios 6.  I have tried on the ipad and connected to itunes and both say up to date.  How to I update to ios 6?

    My ipad currently has ios 5.1.1 and won't recognize any available update for ios 6.  I have tried on the ipad and connected to itunes and both say up to date.  How to I update to ios 6?

    See the chart below to determine whether you can upgrade your device and what you can upgrade to. If you do not have a Software Update option present on your iDevice, then you are trying to upgrade to iOS 5 or higher. You will have to connect your device to your computer and open iTunes in order to upgrade.
    IPhone, iPod Touch, and iPad iOS Compatibility Chart
         Device                                       iOS Verson
    iPhone 1                                      iOS 3.1.3
    iPhone 3G                                   iOS 4.2.1
    iPhone 3GS                                 iOS 6.1.x
    iPhone 4                                      iOS 6.1.x
    iPhone 4S                                    iOS 6.1.x
    iPhone 5                                      iOS 6.1.x
    iPod Touch 1                               iOS 3.1.3
    iPod Touch 2                               iOS 4.2.1
    iPod Touch 3                               iOS 5.1.1
    iPod Touch 4                               iOS 6.1.x
    iPod Touch 5                               iOS 6.1.x
    iPad 1                                          iOS 5.1.1
    iPad 2                                          iOS 6.1.x
    iPad 3                                          iOS 6.1.x
    iPad 4                                          iOS 6.1.x
    iPad Mini                                     iOS 6.1.x
    =====================================
    Select the method most appropriate for your situation.
    Upgrading iOS
       1. How to update your iPhone, iPad, or iPod Touch
       2. iPhone Support
       3. iPod Touch Support
       4. iPad Support
         a. Updating Your iOS to Version 6.0.x from iOS 5
              Tap Settings > General > Software Update
         If an update is available there will be an active Update button. If you are current,
         then you will see a gray screen with a message saying your are up to date.
         b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
         c. Resolving update problems
            1. iOS - Unable to update or restore
            2. iOS- Resolving update and restore alert messages

  • (makeshift) case for the iPad Camera Connection Kit?

    Has anyone found anything that would make a good case for the iPad Camera Connection Kit? i'm afraid I will lose mine if i don't put it in something, but i do want to keep it small

    Go to the dollar store & get a cheap cell phone case. You might be able to get a case large enough that will also store the USB cable.
     Cheers, Tom

  • What is the best wireless label printer for iPad?

    What is the best wireless label printer for iPad?

    The Epson Mobilelink P60 series and the Star Micronics T300 will work over wi-fi, but not being AirPrinter printers you'll have to find a third-party printing app that will work with them. The Epson P60 now also supports printing via Bluetooth, according to Epson:
    https://pos.epson.com/products/MobilinkP60withBluetooth?ProductPK=679
    Perhaps one of those would work for you.
    Regards.

  • Will the iPad Mini connect to LinkSys WRT54G Router

    Will the iPad Mini connect Via WiFi to a LinkSys Wireless G Braodband Router?
    The model is WRT54G V5, SN CDFBOE865514 and Firmware is the latest 1.02.8 dated 5 Oct 2009
    My wife's iPad 2 connects to it well but we have been unable to connect the new iPad Mini to it.
    I have read in some of your notes that the Mini will only connect to Firmware 1.02.8n.

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Been using an ipad 2 without passcode for quite some time. While upgrading to ios 7, I enabled Find Iphone on the Ipad. It asked for passcode and I gave one. Now I forgot it.

    Been using an ipad 2 without passcode for quite some time. While upgrading to ios 7, I enabled Find Iphone on the Ipad. It asked for passcode and I gave one. Now I forgot it. Connected it iTunes (on my windows 8 system) with which I sync and that too required an update as old version of itunes cannot read ios7. Problem is itunes does not want to get updated. Some vague error on not having right to write a file in ProgramData folder wheras as an admin i have full rights. Next I downloaded the install file from itunes site - no luck it would not install. Then I tried to remove itunes - it does not want to go. Am at wits end... Is the option only to restore it as a new Ipad?

    Place the iPhone into recovery mode and restore the iPhone with iTunes on your computer.
    http://support.apple.com/kb/HT1808

  • Ipad is disabled connect to itunes but i connected it and there was a popup saying itunes cannot connect to ipad because it is locked with a passcode. You mus enter the passcode on the ipad before it can be used with itunes. but i couldnt enter my passwor

    my ipad is disabled and it said ipad is disabled connect to itunes but i connected it and was restoreing it and then there was a popup and it said itunes cannot connect to ipad because it is locked with a passcode. and you must enter the passcode on the ipad before it can be used with itunes. But i couldnt even write the passcode on my ipad cause it was disabled. What should i do now????

    Follow the instructions on this page to reset your iPad : http://support.apple.com/kb/HT1212
    Note: If iTunes asks you to enter the passcode, try another computer that you have synced with. Otherwise, go to "If you have never synced your device with iTunes, or you do not have access to a computer" section below.
    If you have never synced your device with iTunes, or you do not have access to a computer
    If you see one of following alerts, you need to erase the device:
    "iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."
    "You haven't chosen to have [device] trust this computer"
    If you have Find My iPhone enabled, you can use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
    Alternatively, place the device in recovery mode and restore it to erase the device:
    Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
    While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    Continue holding the Home button until you see the Connect to iTunes screen.
    iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device.

  • HT4101 I have a NIKON COOLPIX P500 but am unable to download photos through the IPad camera connection kit. I have tried to use the Sandisk card also - no result. Any suggestions? The Ipad does not "see" the card or camera?

    I have a Nikon Coolpix P500 but am unable to download photos from it to my iPad2 via the iPad Camera Connection kit. The iPad does not see either the Sandisk 8GB card or the Nikon camera. I have turned the camera on, but it seems that the camera just want to recharge its battery through the iPad as the iPad states that the devices draws too much power?? Anybodu solved this problem yet? Advise please?

    One thing to check is the format that the camera is saving pics to the card in. Many are selectable and, in most cases, if PTP is one of the options then you need to have that one selected for the files to be visible to iOS and the CCK (connection kit).
    Another thing which sometimes comes up, especially with older cameras and therefore probably not with yours, is the filenaming conventions used by the camera. iOS is quite strict about what it expects to see and if files are being stored with unsupported name formats then they simply won't be seen at all.

  • HT204306 my kids enter wronge passwords several times until the ipad says"connect to iTune" but the ipad does not appear on the iTune.I know the correct password.

    my kids enter wronge passwords several times until the ipad says"connect to iTune" but the ipad does not appear on the iTune.I know the correct password.

    You've connected the iPad via cable to your computer, and your computer's iTunes is up-to-date ? If it's icon isn't showing then try one of these troubleshooting pages :
    PC : iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
    Mac : If you don't see your connected device in iTunes for Mac - Apple Support
    If the iPad is disabled then you'll need to reset the iPad back to factory defaults, after which you can restore to your backup

Maybe you are looking for

  • Screen wont tilt anymore after updated to iso7, cant play games anymore

    Help my screen wont tilt anymore after updated to iso7. When playing a game the person wont move when i tilt to left or right. ive unlocked the portrait and still wont work. Nothing tilts when  i trun phone side ways. any help would be great Cheers

  • Translation of interactive Forms - (multilangual, international)

    Hi there, Is there a better way to translate a interactive form than copy it and translate it separately? I tried to use dynamic caption, but there is no effect if I map the caption of a text element to a data connection. (If I do the same with a but

  • Upgraded to iTunes 10.5, reinstalled Windows 7, music is missing

    Hi. My PC crashed when I was atempting to backup iTunes and my Documents and I had to reinstall Windows 7 and upgrade to iTunes 10.5. All my music is now missing. I do not have a backup since that was the source of the crash. Thanks for your help. Ch

  • Schema validation in owsm gateway.

    Hi all, Could any one of you tell me how to validate the incoming message payload against the schema in the owsm gateway. Thanks & regards, Manoj Nair.

  • HT5260 Unable to open iPhoto library

    Somehow my iPhoto library has become saved as an Aperture library, even though I do not own Aperture. When I attempt to open the library in iPhoto, I'm prompted with a demand to upgrade to Aperture 3.3 for $80. Is there a work around? I have no inter