Is the iPhone 5 call volume nice and quiet at the lowest setting?

I have an iPhone 4 and prior to this IOS6 debacle I was going to upgrade but for the moment I'm hanging fire until the release of 6.1
When I upgraded my i4 to IOS6 my call volume got much louder, even at the lowest setting it is too loud for me and I have to hold the phone away from my ear. I have reinstalled IOS several times to try and cure this (and other problems) but to no avail. I was just wondering if the different hardware on the iPhone 5 handles things differently? It is very important to me that the lowest call volume setting is quiet, after all we can always turn it up but not being able to turn it down is a big issue for me.

Here's a screenshot

Similar Messages

What files do I need to download iPhone photos to a thin client (HP)? Apple Mobile Support gives 4 dll files to enable the iPhone to be detected and charged but the thin client doesn't see the camera or hard drive.

The iTunes Installation files include 4 driver dlls that I can install on a Windows thin client to enable the iPhone to be charged.
The iPhone hard drive or photos are not detected. I guess I need scanner driver support to cope with the camera.
Can anyone tell me which files from the iTune installation set are needed.
It is not practical (or even possible?) to install the whole iTunes package.
I've seen this question asked by a lot of people but never seen an answer.
Please, can someone help...

Thanks for the reply.
A thin client is used to connect to a Terminal Server, or in my customer's case, a Citrix Server. I need the thin client to see the iPhone as a camera and pass it to the Citrix Client so the photos can THEN be either stored on a network storage device, or e-mailed.
Because the thin client doesn't even SEE a camera (i.e. the iPhone) it won't be able to connect to iCloud to do anything useful.
I think the question I should be asking, is how do I give the thin client Camera Support.
I've just seen a 2008 forum comment that said the iPhone DOESN'T handle photos through iTunes, but the PC (Scanner support) or MAC (iPhoto) handles them directly. I should be putting the question to HP.
This is still a good place for THIS question, because I've seen so many iPhone users asking it...
If I get a satisfactory answer I'll post it back here.

Is it possible to use the iPhone as a modem and pick up the internet ?

I wondered if it was possible to use the airport facility on an iMac G5 to pick up the internet from an iPhone placed near by ? THis would effectively make the iPhone a wireless modem ?
I've not got an iPhone yet and this would be really useful.
Thanks in advance.

The iPhone does not currently support tethering. There was an app that did that, but it was pulled from the App Store after only a few hours of availability, and all such apps have apparently been banned.

How to calculate the Daily Call Volume

Hello,
Can anyone please advise how to calculate the daily call volume in a contact center - the counts of the calls terminated in ICM ?
Is there any webview report or a SQL query which provides the count ?
Many thanks in advance for the help!
Thanks & Regards,
Naresh

The ICM software generates a Termination_Call_Detail record for each call that arrives at the peripheral. From This report you can get the number of calls to ICM as well as the call details.
To get the report run this sql query
select * from dbo.t_Termination_Call_Detail where convert (varchar(10), DateTime, 101) = '12/03/2010'

My sister had a problem with call volume being too low on the iPhone 5S. Is the iPhone 6 louder? Is anyone else feeling that call volume on iPhone 5S isn't loud enough?

My sister had a problem with call volume being too low on the iPhone 5S. Is the iPhone 6 louder? Is anyone else feeling that call volume on iPhone 5S isn't loud enough?

I personally haven't experienced much of the "reverberation/feedback" when using a headset on the i4S...
Yes, I have near-perfect hearing too (for scope, squeaky brakes hurt my ears) I come from many conversations on many phones and types and first off, CDMA technology is great for coverage, terrible for voice quality. HD Voice in Europe made for some of the best phone conversations I've ever had.
Back on track, feedback is most noticable (similar to the landline phone) when using the iPhone without a headset, but for me it's not an absolute criticality mainly because I use VoIP apps alot, so maybe it has desensitized me some over the past year.
But whenever I'm on a call, and the other person has me on speakerphone, I have alot of trouble talking because of the feedback loop caused. So the less of my voice I hear the better I can talk.
Have you tried a bluetooth headset yet?

TS3406 I have a connection in the top left hand corner and can access the internet with and without internet on my iphone 5c but I can't receive and create texts and calls, someone please help have tried everything!

I have a connection in the top left hand corner and can access the internet with and without internet on my iphone 5c but I can't receive and create texts and calls, someone please help have tried everything!

YOu will need to contact your cell phone provider to resolve those issue, those are carrier features.

The outgoing call icon has just appeared in the menu bar at the top of the screen on my iPhone 5 and i cant seem to get rid of it.

The outgoing call icon has just appeared in the menu bar at the top of the screen (next to the wifi icon) on my iPhone 5 and no matter what i do i cant seem to get rid of it.
I have rebooted and and cleared all running apps and still on luck.
The phone still works ok and i can make and receive calls.... any ideas on how to get rid of it?
Thanks

Here's what it looks like.
Mine did the same, just randomly overnight

Does the iPhone 4S volume speaker is not loud?

Doed the iPhone 4S volume speaker is not loud?

If you are asking for the relative volume of the speaker, it should be loud enough to make calls in a quiet to moderately loud room via speakerphone or otherwise.
If you are asking if it is normal for sound to only come out of one side of the speaker at the bottom of the phone, then yes. One side is the speaker, and the other side is the microphone.

HT204368 I recently upgraded from an iPhone 4s to an iPhone 5. I have a Motorola HX550 Bluetooth Headset which worked flawlessly with the iPhone 4s. However, since upgrading to the iPhone 5, I frequently lose audio when in the middle of a call. I am no

I recently upgraded from an iPhone 4s to an iPhone 5. I have a Motorola HX550 Bluetooth Headset which worked flawlessly with the iPhone 4s. However, since upgrading to the iPhone 5, I frequently lose audio when in the middle of a call. I am not certain whether it is a full disconnect or just an audio loss. The person on the other end reports still being able to hear me, however, I suppose they could hear me speaking over another source even if bluetooth disconnected. The loss of audio is always preceded by a quick shrill noise, so I can easily tell when it happens. All I have to do to fix the problem is to select Audio Source on the call screen, temporarily switch audio back to the iPhone, and then switch back to the headset, and then it starts working again.
Is is important to note that I am not the only one experiencing this issue:
This is a link to someone using the Motorola H19txt headset experiencing the same issue
https://forums.motorola.com/posts/94ac15ad7c
If you go to the Plantronics website and look at the "Ratings and Reviews" on the Voyager Legend you will see the same issue reported:
http://www.plantronics.com/us/product/voyager-legend (next paragraph is taken from the review since there is no direct link to the review.
Really nice Headset unless you own an Iphone 5. I own several Plantronics headsets and have always loved the quality/ performance. This headset seems not to be compatible with the new Iphone 5. In the middle of a conversation it will lose all incoming audio. This leaves you trying to switch audio sources really fast in order not to lose your phone call. Ive tried 3 legend headsets and they all do the same thing. Hopefully this gets fixed soon because the headset is really nice
Since this issue appears to affect multiple headsets from multiple vendors, I think it is fair to conclude that it is an issue with the iPhone5 bluetooth itself.
I am posting this as a new discussion as I don't see any other posts specific to this iPhone 5 Bluetooth issue. I would have reported this as a problem to Apple, but don't seem to be able to find a way to do this on the web. Hopefully they are already aware, but if not, maybe they will see i here.

here is an interesting thing: take the iphone and set lock screen to never. Now make an email with siri--be sure to activate her with call button. get to the body and get some text in there. then just stop talking. LOCK SCREEN APPEARS!!!!!! and of course you draft is gone.
There does seem to be a work around for some--maybe all these issues. Don't use the call button--use the buttons on the phone.
Siri seems to behave properly with scenerio above---sans call button. She does not go to lock.

Iphone call volume too low

I recently bought a new Iphone 4 but have experienced a problem with very low call volume, I can not hear the other person on the line at all if there is any background noise. I have removed all packaging including the plastic film so this cannot be the problem as it has been in some cases. I was able to have a hour long phone call to begin with and everything worked well and after this the volume just dropped.
I have fiddled with the in-call volume buttons but it seems to make little difference.
Thanks for any help, I'm sure there is something really silly that I'm not doing to fix it.

Other places here sugest looking for an obstruction ... I had my cover screen replaced ... removed the film ... but didn't notice there was a tiny piece a few mm. still over the speaker ... removing it worked ...

I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build. The same call works fine when running on the device

I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build. The same call works fine when running on the device (iPhone) using debug build. When running with a release build, the result handler is never called (nor is the fault handler called). Viewing the BlazeDS logs in debug mode, the call is received and send back with data. I've narrowed it down to what seems to be a data size issue.
I have targeted one specific data call that returns in the String value a string length of 44kb, which fails in the release build (result or fault handler never called), but the result handler is called as expected in debug build. When I do not populate the String value (in server side Java code) on the object (just set it empty string), the result handler is then called, and the object is returned (release build).
The custom object being returned in the call is a very a simple object, with getters/setters for simple types boolean, int, String, and one org.23c.dom.Document type. This same object type is used on other other RemoteObject calls (different data) and works fine (release and debug builds). I originally was returning as a Document, but, just to make sure this wasn't the problem, changed the value to be returned to a String, just to rule out XML/Dom issues in serialization.
I don't understand 1) why the release build vs. debug build behavior is different for a RemoteObject call, 2) why the calls work in debug build when sending over a somewhat large (but, not unreasonable) amount of data in a String object, but not in release build.
I have't tried to find out exactly where the failure point in size is, but, not sure that's even relevant, since 44kb isn't an unreasonable size to expect.
By turning on the Debug mode in BlazeDS, I can see the object and it's attributes being serialized and everything looks good there. The calls are received and processed appropriately in BlazeDS for both debug and release build testing.
Anyone have an idea on other things to try to debug/resolve this?
Platform testing is BlazeDS 4, Flashbuilder 4.7, Websphere 8 server, iPhone (iOS 7.1.2). Tried using multiple Flex SDK's 4.12 to the latest 4.13, with no change in behavior.
Thanks!

After a week's worth of debugging, I found the issue.
The Java type returned from the call was defined as ArrayList. Changing it to List resolved the problem.
I'm not sure why ArrayList isn't a valid return type, I've been looking at the Adobe docs, and still can't see why this isn't valid. And, why it works in Debug mode and not in Release build is even stranger. Maybe someone can shed some light on the logic here to me.

TS1591 My iphone 4 randmonly started going into recoveery mode when i was trying to download ios 7.1, and now the apple logo will come one and then fade to black and continue this process. My iphone wont restore either and will get the 3194 error message.

My iphone 4 randmonly started going into recoveery mode when i was trying to download ios 7.1, and now the apple logo will come one and then fade to black and continue this process. My iphone wont restore either and will get the 3194 error message.Help please!

Hello chindeepchow,
Thank you for using Apple Support Communities.
For more information, take a look at:
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/ts3694#3000
Resolve communication issues
Related errors: 17, 1004, 1013, 1638, 3014, 3194, 3000, 3002, 3004, 3013, 3014, 3015, 3194, or 3200. These alerts refer to gs.apple.com, say "There was a problem downloading the software," or say the "device isn't eligible for the requested build."
Check the hosts file or TCP/IP filtering, which might cause communication issues between iTunes, ports, and servers.
Have a nice day,
Mario

Will the iphone 5s support talk and data simultaneously?

Will the iphone 5s support talk and data simultaneously? Didn't hear anything about it so just want to confirm.

musaabo wrote:
Will the iphone 5s support talk and data simultaneously? Didn't hear anything about it so just want to confirm.
No.
(I'd put the link up but I think Verizon would delete/edit my post).
From a New York Time's piece, "It was Apples decision to design the iPhone 5 so that customers could only make voice calls and do Internet activity simultaneously only over Wi-Fi, not over Verizon cell network."
The reason why...
"The explanation for this, it turns out, is complicated. The technology in 4G LTE networks does not currently handle voice transmissions; it only does data. So when you place a phone call on a 4G LTE smartphone, it’s actually rolling back to the carrier’s older second- or third-generation network, according to AnandTech, a Web publication that does deep analysis on hardware."

Looking for a Bluetooth headset that can control the iPhone's volume

Hey guys,
I'm looking to buy a cheap bluetooth headset that can control the iPhone's volume. The reason why I'm looking for that is because I want to take remote pictures. I currently have the Motorola H350 and it does have volume buttons except they control the headset's volume, not the iPhone's.
I was wondering if you guys could help me.
Thank you.

Like ur self, I'm also looking for a bluetooth that can trigger the cam on iphone 4s, mainly for moment when I'm all alone for a picture.
Have tried the following earphone without success, all purchase through Apple Store, guess will have to source somewhere else.
1. Jawbone ERA - failed
2. Bose BLuetooth Headset series II - failed

Can the iPhone have settings profiles? I want the settings of what apps are using the "call home" automatically set based on my location or the time of day. Is this possible?

Can the iPhone have settings profiles? I want the settings of what apps are using the "call home" automatically set based on my location or the time of day. Is this possible? Of course the GPS location feature will need to be on in order for this to work. But the idea here would be to optimize battery life by disabling the 'call home' requests of apps. The settings profile should also support downloads as I would like to download and allow it when I am on WiFi but not so much when I am using my cellular data.

No, this is not possible as the sandboxed nature of iOS would not allow any app to modify another app like that. Such a feature would have to be enabled by Apple as a part of iOS itself. You can submit feedback to Apple about the idea if you wish to.
https://www.apple.com/feedback/

Is the iPhone 5 call volume nice and quiet at the lowest setting?

Similar Messages

Maybe you are looking for