Is the JDeveloper 11.1.1.0.0 Build 5156 still available anywhere

After downloading and installing the 5188 build of JDeveloper, different pieces of my program stopped working. All related to DVT graphs and timeSelector's. Therefore I was wondering where I could download the 5156 build at since the JAR's that shipped with it work fine for me. I will have to isolate the underlying problem later, but for now I just need a working program.
Thanks,
David

Irrelevant now as 11.1.1.3.0 is working.

Similar Messages

User Interfaces: Is the ain~ui~mobile Package in AII 2.1 still available?

Hello!
During my studies on the outbound scenario script, I found out that there must exist an ainuimobile WebDynPro application for tagging and packing via mobile reader.
This application is mentioned nowhere in the documentation. Just the obviously older process script uses a link to this application. I didn't found an entry for ainuimobile in the Web Dynpro Content Administrator screen. There is just the ainsodesktop package available. When I try the /MobileReaderApplication on the ainuimobile package, I get a lot of errors. Even when I try the /MobileReaderApplication on the ainsodesktop package, I get errors.
My question is: Is the ainuimobile package or something similar in AII 2.1 available? Has it been removed from 2.0 to 2.1? If this ships with AII 2.1, why isn't it installed with the standard installation?
Thanks in advance,
Johannes

Hi Haakon,
single component export/import is only supported for application which are identical on the source and target system. It relies on the fact that other referenced components (for example user interface, templates, ...) use the same IDs on body systems.
Because of the APEX 4.2 upgrade, that's not the case anymore. As part of the upgrade, several new components had to be created on the fly which do now have different IDs on dev and prod. That's why the single component export/import doesn't work anymore.
If the single component export/import is used to patch applications, it's recommended to do a full export of the app on dev and import it into prod after upgrading to a newer version of APEX to make sure that body systems are using the same component IDs. After that your single component deployment should work as before.
Regards
Patrick
My Blog: http://www.inside-oracle-apex.com
APEX Plug-Ins: http://apex.oracle.com/plugins
Twitter: http://www.twitter.com/patrickwolf

HT204053 I already set up an iPad with my school Apple ID but want to access my home Apple ID files in iCloud. If I delete the school ID in iCloud is my school ID still available? In other words, can I delete an iCloud account and get it back later as i

Since I already set up an iCloud account using my school ID but need to access my home iCloud files, do I need to delete the iCloud school ID to get those home files? I believe so. If so, then can I use the same school ID and password later for iCloud or will it require that I change the password, etc.? Is there another way to get those home files without deleting the school ID?
OR, just help me figure out how to get my school PC to read Pages files. That would answer all the questions. No, I don't have technical permission or power to add programs to my PC.
Thanks for any help you can give me in this matter.

To change the iCloud ID you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iPhone, then sign back in with the ID you wish to use.
When you do this, you may find that the password for your old ID isn't accepted. If this happens, and if your old ID is an earlier version of your current ID, go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iPhone when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

Is the ACR 8.4 a update bad? it's still available for installation

is the ACR 8.4 update bad? it's still available for installation. Has anyone updated and is not having problems?
I really don't want to uninstall all of the CS6 suite

I just received a replacement file to test for the camera raw plugin. This fixed the problem on my installation of CS6 that had updated to 8.4 and was not able to launch Camera Raw from Bridge, and also Bridge was not able to view or alter any Metadata.
There was no need to reinstall PS, just a direct replacement of the file. I don't know how Adobe will be supplying the fix, but as of now, I would not recommend updating to Camera Raw / DNG 8.4 if you are using CS6 until the new file is available.
thanks to Adobe for the quick fix.

Is the SWA Decompression Xtra still available? If so, where can I find it?

I recently installed an older program on my computer, and it says I need the SWA Decompression Xtra to open it. I tried to find it on macromedia.com, where it told me to, but that just redirected here, and I couldn't find it anyway. Is it still available anywhere?

Download the Full installer from http://www.adobe.com/shockwave/download/alternates/#sp - this will install all the Xtras, including Swadcmpr.x32

Java API's supported in the Jdeveloper, IAS, and RDBMS product components

If there are any technical errors or "mistatement of the facts" in this posting, please let me know about them ..
This article is being delivered in Draft form and may contain
errors. Please use the MetaLink "Feedback" button to advise
Oracle of any issues related to this article.
PURPOSE
This article describes the "Enterprise Java Beans" (EJB), "Java Server Pages"
(JSP) and servlets Application Programming Interfaces (API) supported by the
Oracle products, Jdeveloper, Internet Application Server (IAS) and the Oracle
RDBMS release 2 and release 3, also known as Version 8.1.6 and 8.1.7,
respectively.
SCOPE & APPLICATION
All parties interested in the Java API's supported by these products.
Java API's supported in the Jdeveloper, IAS, and RDBMS product components
JDEVELOPER
JDEVELOPER is Oracle's Java development tool designed for coding / development,
testing / debugging, and deployment of Java Applications to the IAS and
RDBMS platforms.
With the java software api's being in a constant state of evolution, each new
release of Jdeveloper adds support for the "then current" version of the java
software api's, if it does not already have it implemented.
JDEVELOPER SERVLET API JSP API EJB API
VERSION VERSION VERSION VERSION
3.2.X.X 2.2 1.1 1.1
3.1.X.X 2.1 1.0 1.0
NOTE :
Sun Microsystems and their advisory teams (Oracle is on it) is working on
"draft" specifications for the next version of all of these API's
EJB -------> http://java.sun.com/products/ejb/index.html
JSP -------> http://java.sun.com/products/jsp/index.html
Servlets --> http://java.sun.com/products/servlet/?frontpage-javaplatform
It is anticipated that future releases of Jdeveloper will continue to be
upgraded to include support for the next version of each api.
To obtain the latest information on Oracle's Internet Development Suite (IDS)
of tools, please review the "Internet Developer Suite" information located
on Oracle's technet web site at :
http://technet.oracle.com/products/index.htm
IAS
IAS is Oracle's next evolution of the web server and application server
product technology superceeding the Web Application Server (WAS) and Oracle
Application Server (OAS) product lines.
IAS SERVLET API JSP API EJB API EJE VERSION
VERSION VERSION VERSION VERSION SUPPORTED
9I(1.0.2) 2.2 1.1 1.1 817
8i(1.0.1-NT) 2.0 1.0 1.0 816
8i(1.0.0-UNIX) 2.0 1.0 1.0 816
The IAS product contains two Java Virtual Machines (JVM) within it's
architecture.
They are called :
1) APACHE JSERV servlet engine
2) ORACLE ENTERPRISE JAVA ENGINE (EJE)
APACHE JSERV servlet engine
The APACHE JSERV servlet engine is an EXISTING product licensed from the
apache group which supports the servlet api 2.0.ONLY.
The APACHE JSERV product does not support ANY JSP's unless the customer
installs a third party jsp engine.
The IAS 8i/9i which has the APACHE JSERV product embedded in it, comes with
Oracle's JSP engine (OJSP) already integrated into it. OJSP supports JSP's up
to the specific JSP engine version documented in the Oracle Universal
Installer (OUI) for the 8.1.7 RDBMS or the IAS products. It is also documented
in the product's release notes.
Oracle ENTERPRISE JAVA ENGINE (EJE)
The EJE formerly known as :
1) Oracle 8i Java Virtual Machine (JVM)
2) JSERVER component,
3) Aurora JVM
was originally releas ed in the RDBMS 8.1.5 database with jdk 1.1.6 based java
support.
The currently supported versions of the Oracle 8i RDBMS, versions 2 and 3,
also known as Version 8.1.6 and 8.1.7, respectively, provides a jdk 1.2.1
based java virtual machine support.
"EJE" Version 816
This EJE, found in rdbms 8.1.6 and IAS 8i, contains support for the ejb
api 1.0, corba, and java stored procedures.
"EJE" Version 817
This EJE, found in rdbms 8.1.7 and IAS 9i, contains support for the ejb,
corba, and java stored procedures as well as the Oracle Servlet Engine (OSE)
which provides support for the servlets 2.2 api and JSP 1.1 api.
Note :
EJB support in the "EJE" Version 817 has been upgraded to comply with the EJB
1.1 api specification which includes "entity beans" support.
What is the bottom line ??
1) Servlets deployed to the APACHE JSERV must comply with servlet api 2.0.
2) Servlets 2.1 or higher are only supported in EJE's OSE component found in
the rdbms 817 or ias 9i products. Servlets api 2.0 can also run in the OSE.
References
1) "Oracle9i Application Server Technical White Paper" located at :
http://technet.oracle.com/products/ias/pdf/9ias_102.pdf
2) "Whats New? Oracle8i JVM Accelerator, Oracle Servlet Engine, OracleJSP ..."
located at :
http://technet.oracle.com/products/oracle8i/pdf/504.pdf
3) "Oracle8i Release 3 New Features Summary" located at :
http://technet.oracle.com/products/oracle8i/pdf/8iR3_nfs.pdf
null

which jvm is used by jserv ?? EJE or a separate jdk ?
The Jserv servlet engine is running in a separate jdk JVM external to the EJE jvm which is embedded within the "database" component of ias and the RDBMS.
See the reference below for more details ...
if jserv only support old apis, why it is in oracle's products ?
i would assume that the oracle servlet engine was under development when ias 8i was released and became available in time for the ias 9i and rdbms 817 products.
looking back in history leads me to believe ias 8i was a migration path to get to ias 9i or rdbms 817.
Based upon the long history of new releases of every oracle product being upgraded with new features, it's reasonable to assume that these products will continue to evolve.
when I deploy a jsp how to deploy in the right servlet container ("EJE") ?
as documented in the reference below, you can deploy JSP's to either the apache jserv jvm or the EJE since the ORACLE JSP engine functionality is in both jvm's.
there are many posts where you can see that people have deploy in jserv and they have problems because they don't use the right container (servlet 2.0 instead of
servlet 2.2) http://technet.oracle.com:89/ubb/Forum2/HTML/006349.html
when ias 8i came out this was clearly an issue since servlet support was at api 2.0, and the current servlet api was probably at 2.1.
oracle clearly made every effort to get ias 9i released quickly to supply a servlet 2.1 and 2.2 capable engine to resolve this issue.
since ias 9i and rdbms 8.1.7 are available this is no longer an issue.
The reference below explains the architecture and understanding it would eliminate a lot of "deploy to the wrong ias 9i component" issues.
so why jserv is bundled with oracle 8i/9ias since EJE support the right api version ?
if in ias 9i release , oracle had removed the jserv component without any advance warning, many customers would have been very upset since oracle makes every attempt to give advance notice before removal of functionality.
References
1) "Oracle9i Application Server Technical White Paper" located at :
http://technet.oracle.com/products/ias/pdf/9ias_102.pdf

How to insert new record in the database table using the Jdeveloper

Hi Masters
I am new Bee in j2EE developing side and i ahve oracle jdeveloper 9i version is 9.0.4
And now I wann to know that how can i create the web application that will enter the Data in the HTML FORM and save that data into the Table emp plz tell me step by step
thx in advance

the steps to follow -
download JDeveloper 10.1.2 from OTN (9.0.4 is very old and has some features that won't be in the next releases).
Then follow the ADF Workshop from the JDeveloper home page on OTN.
(If you have to use 9.0.4 then look for the archives of JDeveloper on OTN)
for example:
http://www.oracle.com/technology/products/jdev/viewlets/viewlet-archive0903.html

How to configure the jdeveloper 11 with .dbc files?

hi, all
i am a new bie here. 4 jdeveloper 10, i can configure the .dbc files at project setting, while 4 jdeveloper 11, it's totally different. i can't find any place to configure it. How to configure the .dbc in jdeveloper 11?
Regards,
Chelsea

You cant use jdev 11g for OAF development..
You need to download the jdeveloper patch from metalink to develope OAF objects.
Refer this metalink note to find the correct version of jdeveloper that you need to download https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=416708.1
--Prasanna

Problems with integracao of the JDeveloper with Software Configuration Management (S

1) Error with JDeveloper 9i and Software Configutarion Management (SCM)
I have a problem with the JDeveloper 9i integrated with the repositorio 6i (SCM). When I make checkout of a
source in java of the repositorio, after that I make the alteration and later I make checkin of this source,
some times occur an error of feed of checkin or occurs error of checkout in case that it obtains to
make checkin.
2) Error when I open one branch and later that the alteration was finished I want to finish this branch.
when beginning one branch to tabalhar and I make alterations in a source in java, and to the end I want to
finish this branch, appear a message informing that some source in state of checkout exists, but when I go to
verify in the stack of checkout, do not exist no source or to folder.
Somebody could help me?
In case that it has the solution or it passed for these experiences?

Hi Uwe :-)
We know, that we have to raise the parameter PROCESSES to solve our problem (for a while). But we want to solve and understand the problem once for all.
And we noticed, that the processes raise everytime, we open a web-page in the visual editor in the JDeveloper. And we want to know, if anyone knows why. Or should we have forgot to set any parameter. Maybe its a bug of the JDeveloper version, we are unsing.
I just have found the error, that occurs in JDev.
Listener refused the connection with the following error:
ORA-12519, TNS:no appropriate service handler foundMaybe this is helpfully? :-/
Regards
Majo
Edited by: DerMajo on 09.11.2009 07:49

Where is the rmic in the JDeveloper?

Do I need to rmic my RMI program from the command line?
I can't find the rmi compile feature in the JDeveloper.
Thanks.

RMIC is the RMI stub Compiler
This can be found by opening a command window
Start | Run | CMD
Changing directory to the JDev Home dir
pushd C:\JD30
Searching for the tool
DIR /S RMIC.EXE
You will see that RMIC.EXE is located in
[JDeveloper]\java\bin
John - JDeveloper Team

How do I change the Jdeveloper font?

How do I change the Jdeveloper font for the builtin file editor? I am a new user.
Also, how do I discover (on Linux) what Jdeveloper fonts are available?
Thanks,
sergei

Thanks.
I found that font DejaVu LGC Sans with size 18 is almost good enough for me to use.
Unfortunately none of the fonts display well enough for me to use Jdev as a primary source editor on Linux.
Perhaps Jdev displays fonts more reasonably on Windows -- it is not acceptable to me on Linux.
I don't understand why the Courier font (and all other fonts too) I use on Linux for my standard code editor displays so much smoother than with Jdev which has all chars jagged.

The JDeveloper can't normally debug the java project

SOS!!!
OS: XP SP2 PRO
JDeveloper version:10.1.2
JDK version:j2sdk1.4.2_06
Before the System repairing,it works well.but after I do the System repairing action, it can't work well. but if I copy the whole directory in which the JDeveloper was installed the debug function is work well. And if I disconnect the local networkconnection, it can work well. And even the simple program "Hello world" can't debug
The following is the start time log:
D:\jdev10g10121\jdev1012_base\jdev\system10.1.2.1.0.1913\oc4j-config>
C:\j2sdk1.4.2_06\bin\javaw.exe -server -Xdebug -Xrunjdwp:transport=dt_socket,server=y,address=1990 -classpath D:\jdev10g10121\jdev1012_base\j2ee\home\oc4j.jar;D:\jdev10g10121\jdev1012_base\jdev\lib\jdev-oc4j.jar -Xverify:none -Ddisable.checkForUpdate=true -Doracle.j2ee.dont.use.memory.archive=true -Doracle.j2ee.http.socket.timeout=500 -Doracle.dms.sensors=NONE -Doc4j.jms.usePersistenceLockFiles=false com.evermind.server.OC4JServer -config D:\jdev10g10121\jdev1012_base\jdev\system10.1.2.1.0.1913\oc4j-config\server.xml
[waiting for the server to complete its initialization...]
Debugger unable to connect to local process.
Process exited with exit code 0.
Any one in the JDEV Team can give any advice? Thanks very much for previous.

there are specific instructions in the release notes for setting up and using the jdbc oci driver.
oci drivers require a matching oracle client be installed also.
816 driver ---> 8.1.6 client.
null

How to use schemas in MDS with the JDeveloper JAXB compiler ?

Hello,
I would like to use the JAXB2 compiler to generate a content model from an XSD in MDS. I don't find any way to do it because in order to select the source schema I only can browse my project and application directory but not the MDS. I configured JDeveloper such that to connect to MDS and I'm able to browse the MDS, to open artifacts. But I cannot extract/export/download them from MDS to the JDeveloper project such that to use the JAXB compiler against it. I tried the Add to project function once that the artifact is opned but nothing seems to happen. How could I do that ?
Many thanks in advance,
Nicolas

hi Henrique Pinto!
but you'll need to import all the wsdl's,,,
this mean that i will have to request another wsdl which is general wsdl contained object and operation and soap action?
or i can use only this wsdl and then need to do something in external definition with this wsdl?
thanks & regards
dennis
Message was edited by:
ogawa Dennis

IMPORTANT MESSAGE: THIS FORUM HAS MOVED TO THE JDEVELOPER FORUM

THIS IS AN IMPORTANT NOTE FROM THE JDEVELOPER ADF UIX DEVELOPMENT TEAM
With the release of JDeveloper 10g and Oracle ADF (ADF UIX, ADF Business Components, ADF JClient) we are consolidating our resources to one forum - the JDeveloper forum. All current posts/threads within this forum will, in time, be moved over to the JDeveloper forum. Meanwhile you should post all new questions to the JDeveloper forum, since this forum from now on will not be monitored by the JDeveloper ADF UIX development team. The JDeveloper ADF UIX development team will focus on answering UIX questions on the JDeveloper and ADF.
Regards,
JDeveloper Product Management
[Edited by: jjacobi on Nov 21, 2003 5:32 PM]

Do you have an add-on called Adblocker Plus in your Add-on Manager?
'Tools' > 'Add-ons' or '3bar menu icon' > 'Add-ons'
Disable this addon and test. It has been known to cause some issues.

Problem while starting the Jdeveloper studio

Hi,
I have installed the Jdeveloper 11.1.2.0.0.
But when I am starting the Jdeveloper Studio I am getting the error as "Unable to create an instance of the Java Virtual machine located at C:\Program Files\Java\jdk1.6.0_20\jre\bin\client\jvm.dll".
I have install the JDK 6.0 Update 20 at C:\Program Files\Java Folder before installing the Jdeveoper.
And I had mention C:\Program Files\Java\jdk1.6.0_20 path while installing Jdeveoper JDK location.
To test whether JDK has been install properly or not I have also tested a sample java program and it worked.So I think there is no problem for JDK.
But While starting the Jdeveloper Studio I am getting the above mentioned error.
Can Someone is aware of this error? Or face this error at any stage?
Please let me know the solution if knows
Thanks,
Shweta

Hi,
Changing the virtual memory option did not worked for me.
I have found the following solution and it worked for me.
In order to fix this type of error, go to installation_directoy\Middleware\JDeveloper\jdev\bin folder
and edit file jdev.conf.
Locate line "AddVMOption -XX:MaxPermSize=256M".
Now add another line just below this line:
AddVMOption -Xmx256M
I found this solution at : javainnovations.blogspot.com/.../jdeveloper11g-startup-error.html
It work for me.
Thanks,
Shweta

Is the JDeveloper 11.1.1.0.0 Build 5156 still available anywhere

Similar Messages

Maybe you are looking for