Is the Lighting Effects Filter still 32-bit in CS6?

In Photoshop CS4 and CS5, it's a real PIA to have to restart PS in 32-bit mode in order to use the Lighting Effects filter (FILTER>RENDER>LIGHTING EFFECTS). Has this been addressed in CS6? (Still looking for reasons to upgrade.) Thanks.

See this article: http://forums.adobe.com/thread/979969
It focuses on GPU requirements and troubleshooting. The Lighting Effects Gallery depends on the right graphics card and drivers.
Run throught the troubleshooting steps first in order to see what needs to be done.

Similar Messages

Ps CS6 Problem: Lighting Effects filter quantises 16-bit height-map to 8-bit in a 16-bit document

I've edited this message: one complaint has been removed - it was my mistake - conroy.
Photoshop 13.0.1
OS X 10.6.8
16 bits per channel RGB mode.
The Lighting Effects filter quantises the optional height-map channel to 8 bits, which can result in a very obvious terraced-slopes appearance and moiré.
(Adobe, please do not simply reply with "you should be using 13.0.4" unless that actually fixes the problem.)

Alpha channels are 16-bit in a 16-bit per channel document. As Christoph said, selections are limited to 8-bit, so if you make a channel from a selection then that channel will have 8-bit quantisation.
Here is an example of Lighting Effects filter using a channel containing a 16-bit radial gradient as a height-map, and where the filter is quantising the height values to 8-bit.

Why is the Lighting Effects Filter crashing PS CC?

I am creating an RGB 8-bit image, and every time I select the Lighting Effects filter it starts to load then crashes Photoshop CC.

Please read this:
http://forums.adobe.com/thread/419981?tstart=0
Have you tried different »Advanced Settings« under Photoshop > Preferences > Graphics Processor Settings?
Is your GPU driver up to date (accoriding to the maker’s site, not the OS maker’s)?

Using the lighting effects filter causes my CS6 to crash

Hi,
I read other threads with people have issues with their PC, but I am not able to follow them to correct my issues.
When I open a JPEG file from my mark iii into CS6, I try to start a new layer and then add the lighting effects filter. CS6 crashes (the little effects comes up on the screen and the little blue circle goes round and round). Nothing happens, but if I check task manager it says photoshop is not running.
I have windows, 16GB ram, and am using a small percent of my memory.
How do I see if I need to update my video card and how do I do that?
Thank you, Michele

Have you installed all the Photoshop updates?
And have you checked your GPU maker's website for updated video card drivers?

Every time I use the Lighting Effects Filter the software crashes.

Every time I use the Lighting Effects Filter the software crashes.

It worked last Friday. I don’t know if there has been any update this week. All updates are done automatically by our IT department.
Heléne Björklund
[ excessive signature and quoting removed by admin - please remember that this is a web forum ]

PSE-12: where is the Lighting Effect filter?

PSE12--Lighting Effects Filter IS NOT IN THE PSE-12 THIS WAS A NICE AFFECT ON YOU PHOTOS ADOBE WHY? DID YOU TAKE IT OUT PLEASE BRING IT BACK...THANKS

It has been removed from PSE 12. Refer to this post which talks about a workaround to get it back in PSE 12
http://forums.adobe.com/message/5755213

How do I get the Lighting Effect filter to work with PS5.1 and Mavericks

Photoshop boots up in 64 bit. There is no option to open in 32 bit unter photoshop app, get info dialog box. Only "prevent app nap". When I change to RGB 8 bit. nothing changes. The filter does not show at all. It is not greyed out. When using Finder, the lighting filter seems to be there in the plug-ins folder. Please help. Thank you.

Have you tried an Adobe forum? PS5 is an Adobe product!

The lighting effects controls don't appear in CS6

When using Photoshop CS6 in Windows (Vista 32bit with Intel Core 2 Duo 2.20Ghz and 4GB RAM), Lighting Effects doesn't show any on screen controls for brightness etc. Is this because my system isn't up to it or something else? Thank you

Lighntning Effects uses hardware acceleration, so make sure your graphics card is up to speed and the driver updated. If your computer uses an intel graphics chip, this may never work, though. There seems to be genuine bug on that end...
Mylenium

When attempting to use the Lighting effects filter in CS6 it begins to load but then the programme seizes up. It is then necessary to disconnect from the supply to restart. Having done this an attempt to "Browse in Bridge" simply opens a host of files b

On a previous occasion a similar problem occurred but without affecting Bridge. At that time it was suggested that I update the graphics card and this worked.

Same here I have Lumia 920, 3 days after I bought it the device had an overheating problem and once the phone is off, I have to work hard to turn it on again, from soft resetting and hard resetting it After that I brought the phone to Nokia Care Center (I'm Indonesian by the way) in the NCC Branch in my province. 2 days after that, they told me that the problem was solved and asked me to take the phone. When I got there and the Costumer Service want to give me the phone, she try to turn on the phone, but she can't. She take the phone to a room (I don't know maybe it's the repairman room or whatever) and when she got out she told me that the problem is still exist and they will brought my phone to the NCC Center in other province. I have to wait for 2 weeks. Can you believe it? 2 weeks WITHOUT ANY PHONE? I have to buy another low-end phone that time.
After that the phone back to normal, But Then another problem come, after update my phone to Amber, my phone can't use Nokia Pro Cam (at that time, before Nokia Camera out), Bing Vision, Maps, Glance Screen, Auto Rotate, and GAMES. at first I just have to restart the phone to turn it back, but then the problem is not solved after I restart, even then, I did a hard reset but the problem is still there. Last friday, I brought my phone to the Nokia Care Center, they asked to take it the next day, but AGAIN! The problem is not solved, and they said I have to wait until the newest software update to come so the problem can be solved. Today, still no news or information from them, I don't know if I can trust Nokia Care Center again after this
Regards
Another No longer happy with Nokia Customer

Photoshop CS6 lighting effects filter--where are the handles?

I have read all the previous posts about this, and taken all steps. Running WIn7, 64 bit, my video card is 512Mb, drivers are up to date, PS is up to date, I restarted and stil no handles appear in the Lighting Effects filter.

Does "all steps" include ensuring 'View > Show > 3D Lights' is enabled and 'View > Extras' is enabled when the Lighting Effects filter is active?

Urgent - Need help with Lighting Effects Filter

Hi,
I need urgent help on something regarding the Lighting Effects filter in Adobe Photoshop CS5. I need lighting effect urgently to complete a project.
I am using Photoshop CS5 on a Windows Vista computer in 64-bit mode.
On the net it is given that you can run photoshop CS5 in 32-bit mode to use the lighting effects filter - both on Mac and PC.
My Problem:
While on the net it is given how to change from 64-bit to 32-bit and vice-versa, I have my Photoshop CS5 installed on 'E - Drive' and not on 'C - Drive' due to lack of space. I have followed all the instructions on how to open it in 32-bit mode on the net, but I still cannot use the lighting effects plugin.
What I need is if someone could give simple and clear instructions on how to open Photoshop CS5 32-bit version instead of opening the default 64-bit version on Windows Vista - that would be great.
Looking forward to answers.
Thanks.

That advice about running the 32 bit version of cs5 for the Render> Lighting Effects filter
only pertains to the mac version of photoshop cs5.
The lighting effects filter does work in the 64 bit version of photoshop cs5 on windows, your
document just has to be 8 bits/channel and in the RGB Color mode (Image>Mode) same
for using the lighting effects filter in the 32 bit version of cs5.
Added: In general it's frowned upon installing photoshop on drives other than C drive.
MTSTUNER
Message was edited by: MTSTUNER

CS6 Non-responsive when using Light effect filter in Photoshop

Win 7 OS. I am trying to use the light effect filter and when I select it photoshop gets locked up and won't respond until I end task in task manager (it says photoshop not responding in task manager). Is there a fix for this? I did all of my updates and it still happens. I have homework to do, I need to fix this issue. Any help is appreciated,
Thank you

Every time I try and use lighting effect, on my Win 7, CS6 it crashes. I at least get to use it, but when I click "ok" for the changes to take place, "Adobe has stopped working" and just crashes.
I looked into my Graphics Card drivers update... (AMD RADEON hd 6450) and on the site, I chose a very new update for a catalyst... blah blah. Which gave me this new control panel specific with this new driver update. However, once I downloaded it, restarted (for s & g's) it doesn't show up in my graphics card properties... its the same driver as before. So this may not have anything to do with what help I need. Although, it has a new "control center" that I looked at and its all martian to me.
Someone please help me to resolve this issue??!! I can give more information if needed.

I am having issues with photoshop CC and lighting effects filter

I cannot get the lighting effects filter to work. I get the top portion of the filter effects but the bottom portion, where I get to place the lights, doesnt show up. I am running windows 7, have a 3d enabled graphics card and just updated it today. I have go to view-show-all and still nothing. no matter what I do, i cannot get the damn lights to show up? any suggestions
Here is a screen shot of what I get/

how the hell do I add screen shots?

Lighting effects filter not available on PScc - using windows 8.1 with GeForce GTX 680 graphics card

I have Photoshop cc and Lightroom 5.5. My computer runs windows 8.1, 64 bit, with GeForce GTX 680 graphics card.
I am trying to use the lighting effects filter, but it is grayed out so I cannot select it.
Can you tell me what I need to change in order to use the lighting effects filter?

This is the Lightroom forum. I don't use the lighting effects very often in Photoshop. But if I recall correctly, it will only work on 8-bit images.

Render Lighting Effects Filter Crashing PS CS4 on only Mac Pro Towers...8 Cores!!!

I just recently received a brand new Apple 8 core 2.93Ghz Mac Pro tower and also had the previous 3.33Ghz 8 core with the same exact issue. I have 16GB of memory on this tower and my last tower had 16GB as well. Everytime I run the render lighting effects filter on certain files in PS it hangs up and then crashes on me. I know it is not the files because they work on my Macbook Pro's, my iMac, and have tested them on many other computers other than the Mac Pro tower's at the Apple Retail Store out by me. I ran the same files on their new Mac Pro and it crashed just like it did on my two towers, but was very random and not file specific. Some that crashed on mine opened on theirs and vice versa. I have worked with the Adobe top techs troubleshooting this and supposedly eliminated that it could be a preference related issue, permissions related issue, file issue, and have done many things like disabling Open GL, resetting prefs, reinstalling, trying in new user, in Rosetta, in safe mode, in the root user, etc...super thorough testing and it still happens. Both Apple and Adobe feel that it must be something going on with the Mac Pro tower, PS, and possibly how the graphics card interacts and renders the filter. Actually I opened these files in my PS CS3 and it rendering the lighting effects filter, but was unable to run the filter on the entire image and actually left a 1/4 inch of the bottom of the image untouched which was completely bizarre. I have screenshots and console logs too if someone wants to see. I am REALLY curious to hear if anyone else has run into this problem or if they try what happens. Thanks and curious to hear some input. Regards, Anthony
Here are three links to the files...the first one is the file that is crashing my CS4 when running filter>render>lighting effects. The second is what it did to my file after running that same file in CS3, and the last is what the preview dialog box showed in CS3 when not running the filter on the entire image.
http://www.atortphotography.com/psbugs/AlmondWaffle.jpg
http://www.atortphotography.com/psbugs/AlmondWaffleRenderBug.tif
http://www.atortphotography.com/psbugs/cs3filterpreviewcorrupt

Hey there Bryan...I actually just talked with a level 2 Apple product specialist today after generating a case with Apple and he brought this to Apple Engineers and apparently since it is third party...meaning Adobe....it first has to be documented with Adobe after they look into the problem and then Adobe apparently will or should work together with Apple to help find a solution to the problem. This problem is very easy to reproduce on any 8 core Mac Pro tower and am hoping more people use the darn render lighting effects filter and get on everyone's case. I also had someone I know who is a Photoshop guru...Jim DiVitale test it on his 8 core in his photo studio and he was able to get his PS CS4 to crash like a bomb too. There is obviously something going on that needs to be looked at hopefully MUCH sooner than later so let's see what comes out of this. It really does suck because this is a filter that I actually do use in my workflow quite often. I just know that before I even attempt to run this filter I make absolutely certain I save everything and then hit that darn OK button. Keep on them and try to bring as much attention to this issue as possible so we can come to a resolution fast! @nthony

Is the Lighting Effects Filter still 32-bit in CS6?

Similar Messages

Maybe you are looking for