Is the lightning adapter also pass trough the digital signal? Or only the analog?

I want to order a arcam dr dock. I am not sure, that it will work with the lightning adapter because it has only the 30 pin adapter and it will need the digital signal...

In the meantime I can reply my question by my own. The lightning connector pass also the digital signal trough.
So my new Arcam DrDock is working with new I Pad (4) with lightning adapter.

Similar Messages

  • How to input/output a digital signal and acquire an analog signal at the same time?

    Dasylab, version: 8.0.04
    Acquirement Card: PCI1002L
    When I use DasyLab to acquire the analog signals is no problem without digital inputs and outputs,
    and when I use DasyLab to input or output a digital signal is no problem also, but when I do that at the
     same time, DasyLab tell me the rate is too high and stop.
    so, I searched the manual book1 (user guide) for that, it showed me :
    To internally equalize measurement time and system time in the analog input, digital input and counter
    hardware modules, use the following settings:
       Synchronization: PC Clock
       Sampling rate: <= 5Hz
       Block size: =1
    the problem is, if I set the Sampling rate to 5Hz, the speed of the acquirement datas is not enough for my
    application.
    so, how to improve it? who can give me a example programm for me. thanks!
    by the way, I come from China, my English isn't good, I'm sorry.
    Allen, China.

    Hi,
    Have things changed over the years?
    I need to syncronise a digital output (Modul NI9474) and an analoge input (AI-Modul NI9203) module. I need to measure time intervals from a flank in signal A to a flank in signal B. I would like accuracies of the order of 1 ms. Currently, the signals are not synchronised, with errors of the order of 2 times the block length (block size x sample rate), sometimes much higher. The best I got so far was a block size of around 20 with a sample rate of 1 kHz.
    If I use the master and slave settings on the RTSL settings, my program doesn't run properly.
    If I use digital signals for input and output, I can syncronise them with RTSL settings and everything is good, but I can't always do that.
    Also, if I do anything in the GUI (such as scrollowing something or going to another window), my output gets screwed up properly.
    1. What can be done to synchronise AI with DO?
    2. Is there something that can be done to avoid messing up the output when something happens in the user interface? (I know that I am messing up the outputs as they make some valves switch and that is loud).
    Thanks in advance!

  • Will the Lightning Adapter support remote functionality?

    I have an existing dock, which should work with the lightning adapter. The dock also came with a remote with controlled the iphone4 and 4s. Will remote functionality be maintained through this adapter? The website info on this adapter is a vague, and unhelpful.
    My dock luckily has a line-in, so if the remote functionality doesnt work, then why bother paying $35 canadian for this adapter. When I'll have to manually control the iphone/ipod anyways.

    The adapter will work with ipod dock as to playing musics. But some people are having problem with charging while docked. Ask apple store if the adapter will also work for charging the ipod befor you buy it (because it should supposed to be).

  • When I plug in my SD to lightning adapter for the iPad retina display, nothing happens. I've tried about 50 times, and one time it magically worked, so I know it's possible. Am I doing something wrong?

    I just bought a new iPad with the SD to lightning adapter to upload pictures. When I plug it in, nothing happens. I have tried it with and without the SD card inserted when I plug it in, I've tried restarting it, I've even called Apple support and the woman hadn't even heard of the adapter. One time, it did work, so I know it's possible. I didn't do anything special that time. Every other time it hasn't worked. One time I got a message that said the device was not compatible. I bought them together and the salesman said they work together. Any advice?

    For some reason the lightening adapter version can be buggy.
    A few tricks with mine (mine is the old 30 pin version but the premise is the same). You can give the iPad a reset. Sometimes that clears things up.
    Also, if the adapter is empty then it doesn't show up, because there's nothing to make it show up. If the files on there aren't formatted correctly then they won't show up. (if you're trying to use the adapter and a card to transfer photos to your ipad, they must follow a very strict naming convention or they're not seen)

  • HT1665 I just purchassed a Lightning adapter for my iPhone 5.  My car came with the normal iphone 4 connector.  I have a protective cover on my phone but now the connector will not work as the lightning connecting tong is not long enough to make contact.

    Lightning adapter will not work with iPhone 5 protective cover

    Your case designer should have done their homework .
    They would have full details of the iPhone and its accessories
    assuming they are a developer status

  • HT4101 Has anyone found a way to download pictures from Samsung Gala               xy 3 phone to Ipad air?  I bought the lightning adapter but keeps giving me the message uses too much power.

    Has anyone found a way to download pictures fro Samsung Galaxy 3 phone to the Ipad air? I bought the lightning adapter but I keep getting the message device uses too much power.  Any ideas?

    You can't directly from a Galaxy phone.  But you can certainly upload the pictures from your Galaxy phone to your computer and then sync them to your iPad via iTunes.

  • Lightning adapter will not fit to iPhone 5S with apple case on the phone

    I recently purchased the lightning adapter for my iPhone 5S and the adapter does not insert properly when the Apple leather case is fitted to the phone, surely Apple do not expect one to remove the case to use the adapter?

    Yeah, it doesn't look like much, but I'm leaving in the player dock and you can't see it when it's plugged in. Better than taking case on/off all the time. I didn't wanna cut my case because I don't think there'll be enough of it left to hold together very long. Good luck with yours! I wish ape would have just included a little extension stub with their adapter.

  • LIGHTNING ADAPTER has fused to the USB port that is factory installed in my car.

    LIGHTNING ADAPTER has fused to the USB port that is factory installed in my car.  It will not release from the port and the port is no longer working as a result of my efforts to retrieve the USB cord.  I have been an iPhone owner since the first release in 2007.  I have never had a problem with my Apple products and have remained an enthusiastic, loyal customer.  It is my understanding that Apple only has "extra" USB cords in Apple store.  I live in a rural area without access to an Apple Store.  Retailers and Carriers did not receive shipments of extra charging cords.  This is unacceptable.  I am absolutely at a loss because my port in my brand new car is not longer functioning and will likely have to be replaced, AT MY EXPENSE. My "Lightning" cord is literally stuck in my vehicle.  My phone is currently sitting at Radioshack being charged so that I have at least a charge when I head out of town on business early tomorrow morning.  Suggestions please as I am a VERY unhappy customer!

    This happened to me and a bunch of others as well. https://discussions.apple.com/thread/4321665?start=0&tstart=0

  • Can I control my iphone from an accessory using the 30 pin/lightning adapter?

    I want to use my old accessories to control an iPhone 5s (e.g. skip tracks using my dock remote control), does the 30 pin/lightning adapter work for this or is it just for charging/audio out?

    I want to use my old accessories to control an iPhone 5s (e.g. skip tracks using my dock remote control), does the 30 pin/lightning adapter work for this or is it just for charging/audio out?

  • I had an ipod touch 4th gen and used the apple universal dock to play music through my stereo.  I just got a 5th generation and a lightning adapter but the adapter does not fit the universal dock.  Apple tech support has no solution, does anyone?

    I had an ipod touch 4th generation and used the Apple Universal Dock to play music through my stereo.  I just got the 5th generation and the lightning adapter but the adapter does not fit into the dock.  Apple tech support has no solution, does anyone?

    That is the adapter I purchased from Apple which does not fit in the Apple Universal cradle (which apparently is no longer universal).  However, I just created my own solution.  The cradle holds the dock connector at a slight angle so the adapter, which has a straight bottom edge, will not slide down far enough to make a connection.  Since the adapter has a plastic case, I used my Swiss Army knife to whittle it down to fit.  It's a no-tech solution, and free!

  • On click of Submit button, i want to forward to another mxml page and also pass the paramaters to it

    Hi,
    How can forward/load a new page in Flex 4.?
    On click of Submit button, i want to forward/load to another mxml page and also pass the paramaters to it.
    How can i do it.
    Thanks,

    Checkout popupmanager and public variables

  • HT201269 my pc crashed and i no longer have the music i used to have, how can i sync my ipod  w/ out loosing  all of my  music.  and also how do i update  my ipod only has  a partial version of ios4

    My pc crashed and i no longer have the music i used to have, how can i sync my ipod  w/ out loosing  all of my  music.  and also how do i update  my ipod only has  a partial version of ios4

    It has always been very basic to always maintain a backup copy of your computer for this very occasion.  USe your backup copy to put everything on the new computer, then sync.

  • I have a WD 2 tb hard drive that I want to use to back up my Mac Pro quad core.  How do I create a back up startup disk?  Also, when I used Time macine, it only backed up users and not the system or library folders.  Ideas?

    I have a WD 2 tb hard drive that I want to use to back up my Mac Pro quad core.  How do I create a back up startup disk?  Also, when I used Time macine, it only backed up users and not the system or library folders.  Ideas?

    Welcome to Apple Support Communities
    Time Machine should be enough to make a backup of your files. Also, it should back up all folders, so open System Preferences > Time Machine > Options, and make sure that there are no folders included in the excluded items list.
    If you want to create a bootable clone of your hard drive, you need to use an app like Carbon Copy Cloner or the Disk Utility's Restore feature > http://pondini.org/OSX/DU7.html

  • The vga adapter (for a Benq projector, for example) is only for Ipod touch 4g? I have an 2g. Doesn't work for this?

    The vga adapter (for a Benq projector, for example) is only for Ipod touch 4g? I have an 2g. Doesn't work for this?
    Thanks in advance.

    The VGA is for the 4G iPod only. The 2G can use the composite and component cables.
    http://support.apple.com/kb/HT1454

  • My phone needs a restore but I can not because my pass code is active. It only allows me to go to the emergency call screen. I can't type in my pass code What should I do?

    My phone needs a restore but I can not because my pass code is active. It only allows me to go to the emergency call screen. I can't type in my pass code What should I do?

    Thank you so much I actually did have restrictions enabled. Ur too sweet thanks again for your help

Maybe you are looking for

  • Black Screen on MBP, Can hear chime and can boot from HDD via another MBP!

    Hope someone can help me here, as I'm at my wits end. I've got two issues, one with my MacBook Pro 17in, 4GB RAM, 160GB 7200rpm (2008) and another with my iMac 24in. 4GB RAM, 500GB 7200rpm (2009). Firstly the MBP, left work on Thursday last week, got

  • Urgent help needed in jtable

    PLEASE could someone help me look at this and see why the color of my data in a jtable cell is niot turning red when I press enter THX package mintest; import java.util.*; import java.awt.*; import java.awt.event.*; import java.text.*; import javax.s

  • BEx Query Designer 2 years comparison by month

    Hi expert, I'm drafting a report which want to comparison 2 years cost variance. I want to have 2 column inofmraiton, Cost & Variance % (which is  (Current Period - Previous Period) * 100/ Previous Period)  . I create the follow fields & defined a va

  • Is this really a better way of optimizing memory?

    Hi Friends!                   I am new to Labview and need some help. In a VI sescibed below I would like to know about optimizing the memory. Problem: Needs to take the values of 7 physical quantities for three different time intervals. Each physica

  • Urgent:   Net due date virtual characteristic.

    Hi, We are implementing net due date virtual characteristic. Could some please provide the coding for implementing this in ZXRSRZZZ program. Its very urgent.