Is the LV RTE necessary to run a LV created dll?

Is it necessary to install the LabView RTE when a LV created dll is to be accessed by a C based program? I am guessing that the answer is both yes and no. I have a feeling that the RTE is only needed when specific LV resources are used. If so what resources would trigger the need for the RTE?

You always need the LabVIEW Run-time Engine installed on a machine where you will be calling a LabVIEW-built DLL.
-D
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman

Similar Messages

Just had help installing cc 2014. get this dialog box when i open the app. One or more files in the adobe folder necessary for running photoshop are missing. Help

Just had help installing cc 2014. get this dialog box when i open the app. One or more files in the adobe folder necessary for running photoshop are missing. Help

Please Run the Cleaner tool to remove Ps CC 2014 :http://www.adobe.com/support/contact/cscleanertool.html .
Restart your system and then try installing Ps CC 2014 again.
Regards,
Ashutosh

What are the ways to make Query run fast?

Hi Experts,
When a query runs slow, we generally go for creating an aggregate. My doubt is - what other things can be done to make a query run faster before creating an aggregate? What is the thumb rule to be carried out for creating an aggregate?
Regards,
Shreeem

Hi Shreem,
If you keep Query simple not complicate it with runtime calculations , it would be smooth. However as per business requirements we will have to go for it anyways mostly.
regarding aggregates:
Please do not use the standard proposal , it will give you hundreds based on std. rules , which consumes lots of space and adds up to load times. If you have users already using the Query and you are planning to tune it then go for the statistics tables:
1.RSDDSTAT_OLAP find the query with long runtimes get the Stepuid
2. RSDDSTAT_DM
3. RSDDSTATAGGRDEF - use the stepuid above to see which aggregate is necessary for which cube.
Another way to check ; check the users as in 1 to find the highest runtime users and find the last used bookmarks by user thru RSZWBOOKMARK for this query and check if the time matches and create the aggregates as in 3 above.
You can also Use Transaction RSRT > execute & debug (display stats ) - to create generic aggregates to support navigations for New queries and later refine as above.
Hope it helps .
Thnks
Ram

Event based scheduler job - 2 events at the same time only 1 run

Hi,
i converted our dbms_job - jobs to the newer package dbms_scheduler.
It is a 10.2.0.4 patch 23(8609347) database on an windows server 2003 R2 Enterprise x64 Edition SP2.
The Jobs(about 130) are nothing special ... only some statistics, matview-refreshes and so on.
For the notification of failed jobs and jobs which run over the max_run_duration i downloaded and installed the job notification package.
The jobs are assigned to different departments and the corresponding developer teams in our company.
I created a notification job for each department and if a job fails we (the database administrators) and the corresponding deverlopers will be informed.
Now i ascertained that only 1 email will be send if 2 jobs of the same department fails at the same time.
The emailer-jobs are auto-generated by the job notification package. I only modified them to look after all jobs of special department and not only after one job. (--> event_condition ... object_name LIKE 'XXX%')
example for dba-jobs(copy of the script output of TOAD):
SYS.DBMS_SCHEDULER.CREATE_JOB
       job_name        => 'DBA_JOBS_EMAILER'
      ,start_date      => NULL
      ,event_condition => tab.user_data.object_name LIKE ''DBA%'' AND tab.user_data.event_type in (''JOB_FAILED'',''JOB_OVER_MAX_DUR'')'
      ,queue_spec      => 'SYS.SCHEDULER$_EVENT_QUEUE, JOB_FAILED_AGENT'
      ,end_date        => NULL
      ,program_name    => 'SYS.EMAIL_NOTIFICATION_PROGRAM'
      ,comments        => 'Auto-generated job to send email alerts for jobs "DBA%"'
    );I thought that a queue is used to manage all events from the scheduler jobs. So i made a test with 2 dba jobs and simulated a failure at the same time but i received only one mail.
So what is happend with the second event? I looked for the events in the qtab(SCHEDULER$_EVENT_QTAB) which belongs to the event queue(SYS.SCHEDULER$_EVENT_QUEUE) and no event was missing.
So i think the emailer job has to run 2 times.
Is anyone able to explain or to find my mistake?
I know that the easiest way is to create one emailer job for each normal job but i think this is a little bit costly because all the arguments are the same for one department.
Thanks & Regards

Thanks for your fast answer.
You are right with the "enabled => TRUE;" part and i only forgot to post it.
So the Job is enabled (otherwise it would not send any mail). Because it is sending one mail i think it is also not necessary to hand over a job_type.
Additionally the job starts a program ... so it is right to set the job_type='STORED_PROCEDURE' isn't it?
And also right ... i already added the agent as subscriber to the queue.
Anyway i think the whole thing do what it have to do. So in my oppinion there are no big mistakes in creating the job or at adding the subscriber.
There are also no problem in raising the events by itself and enqueue them in the scheduler event queue.
There is only a problem when 2 jobs fails (or run out ouf max duration) at exactly the same time.
If i understand it right:
The agent/subscriber will find the "JOB_FAILED"-event for the first Job in the queue and starts the emailer Job.
The agent will also find the "JOB_FAILED"-event for the second Job and wants to start the emailer Job again.
I don't know if this is really the problem but perhaps the emailer-job can not be started in consequence of the second event because ist is already running.
I also don't know if this is a mistake of the agent or of the emailer-job by itself.
I only want that it runs two times (one run for each event). I my case it also doesn't matter which email is send at first.

HT4759 I have an iMac, iMac, 10,1 10.8. I would like to have iCloud downloaded to my computer. Does my computer have the system requirement necessary. I use iCal on my Apple Notebook and Iphone 4S. Thank you!

I have an iMac, iMac, 10,1 10.8. I would like to have iCloud downloaded to my computer. Does my computer have the system requirement necessary. I use iCal on my Apple Notebook and Iphone 4S and want it to my Mac Desktop to sinc with all my Apple Products. Thank you!

The minimum requirement for iCloud is Lion 10.7.5 (Mavericks preferred): the iCloud Preference Pane does not appear on earlier systems - the MobileMe pane appears on Lion and earlier but is now non-functional - you cannot now open or access a MobileMe account.
To make use of iCloud you will have to upgrade your Mac to Lion or Mavericks, provided it meets the requirements.
The requirements for Lion are:
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Lion is available in the Online Apple Store ($19.99). Mountain Lion (10.8.x) is also available there at the same price (though it's reported to have been removed from sale in some countries so may well cease to be available generally) but there seems little point as the system requirements are the same for Mavericks (10.9.x) - which is free - unless you need to run specific software which will run on Mountain Lion only.
The requirements for Mountain Lion and Mavericks are:
OS X v10.6.8 or later
2GB of memory
8GB of available space
and the supported models are:
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
Xserve (Early 2009)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
It is available from the Mac App Store (in Applications).
You should be aware that PPC programs (such as AppleWorks) will not run on Lion or above; and some other applications may not be compatible - there is a useful compatibility checklist at http://roaringapps.com/apps:table

Make the installer for my executable run the DAqcarddriver and runtime engine installer automatically

*Hi
I would like to know how to make the installer for my executable run the DAqcarddriver and runtime engine installer automatically
I would like to include run time engine and the drivers of my daqcard(AI16XE50),( and maybe Ni daq or anything else needed?) in order to make my application portable for other computers on OS win98 and winXP .
How can I do that
thank you in advance
Olivier

Olivier,
What version of LabVIEW are you using to build your application? On a remote computer you should only need the drivers you are using and the Run-Time Engine. You can attach installers to LabVIEW 8 installers, but for previous versions you will have to add it by opening the installer configuration page, configuring your installer and then configure the Advanced properties. This will allow you to attach a EXE to the installer which you can run. Also depending on the version of LabVIEW will affect the OS version that you will be able to install the RTE on. LabVIEW 7.0 is the last version that can be installed on Windows 98.
Please let me know if you have any further questions and please include the version of LabVIEW you are using. Thanks!
Andy F.
National Instruments

My husband has 1 of the newer macbook pros that runs off of lion and know his computer wont let him get past the starting screen it keeps telling him to put in a bootible disk he cant use his key board or anything what should he do?

my husband has 1 of the newer macbook pros that runs off of lion and know his computer wont let him get past the starting screen it keeps telling him to put in a bootible disk he cant use his key board or anything what should he do?

Hi...
Use Lion Recovery to repair the startup disk if necessary, or reinstall the Mac OS X.
he cant use his key board
You'll need to use a wired (USB) keyboard.

[svn:fx-trunk] 12399: Flex changes for adding in a resource bundle so that the OSMF RTE messages will be localized for Flex .

Revision: 12399
Revision: 12399
Author:   [email protected]
Date:     2009-12-02 16:22:43 -0800 (Wed, 02 Dec 2009)
Log Message:
Flex changes for adding in a resource bundle so that the OSMF RTE messages will be localized for Flex.
QE notes: -
Doc notes: -
Bugs: -
Reviewer: Gordon
Tests run: checkintests
Is noteworthy for integration: No
Modified Paths:
    flex/sdk/trunk/frameworks/projects/spark/build.xml
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/VideoDisplay.as
Added Paths:
    flex/sdk/trunk/frameworks/projects/spark/bundles/da_DK/osmf.properties
    flex/sdk/trunk/frameworks/projects/spark/bundles/de_DE/osmf.properties
    flex/sdk/trunk/frameworks/projects/spark/bundles/en_US/osmf.properties
    flex/sdk/trunk/frameworks/projects/spark/bundles/es_ES/osmf.properties
    flex/sdk/trunk/frameworks/projects/spark/bundles/fi_FI/osmf.properties
    flex/sdk/trunk/frameworks/projects/spark/bundles/fr_FR/osmf.properties
    flex/sdk/trunk/frameworks/projects/spark/bundles/it_IT/osmf.properties
    flex/sdk/trunk/frameworks/projects/spark/bundles/ja_JP/osmf.properties
    flex/sdk/trunk/frameworks/projects/spark/bundles/ko_KR/osmf.properties
    flex/sdk/trunk/frameworks/projects/spark/bundles/nb_NO/osmf.properties
    flex/sdk/trunk/frameworks/projects/spark/bundles/nl_NL/osmf.properties
    flex/sdk/trunk/frameworks/projects/spark/bundles/pt_BR/osmf.properties
    flex/sdk/trunk/frameworks/projects/spark/bundles/ru_RU/osmf.properties
    flex/sdk/trunk/frameworks/projects/spark/bundles/sv_SE/osmf.properties
    flex/sdk/trunk/frameworks/projects/spark/bundles/zh_CN/osmf.properties
    flex/sdk/trunk/frameworks/projects/spark/bundles/zh_TW/osmf.properties

Thats good news.

Is it necessary to run cleanmymac software?

is it necessary to run cleanmymac software on my Macbook Pro?

Is it necessary, no. Macs perform daily/weekly/monthly periodic maintenance tasks. It may be useful to clear up disk space, though. I recommend:
How to Optimize Your Mac with Onyx
Onyx Mac
It's free and reliable.
I am posting below community member Kappy's suggestions for OS X maintenance (I can't find it in the User Tips). It is a comprehensive and amazing guide:
Kappy's Personal Suggestions About OS X Maintenance
For disk repairs use Disk Utility. For situations DU cannot handle the best third-party utility is: Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption. Drive Genius provides additional tools not found in Disk Warrior for defragmentation of older drives, disk repair, disk scans, formatting, partitioning, disk copy, and benchmarking.
Four outstanding sources of information on Mac maintenance are:
1. OS X Maintenance - MacAttorney.
2. Mac maintenance Quick Assist
3. Maintaining Mac OS X
4. Mac Maintenance Guide
Periodic Maintenance
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) SeeMac OS X- About background maintenance tasks. If you are running Leopard or later these tasks are run automatically, so there is no need to use any third-party software to force running these tasks.
If you are using a pre-Leopard version of OS X, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced after Tiger. (These utilities have limited or no functionality with Snow Leopard, Lion, or Mountain Lion and should not be installed.)
Defragmentation
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive except when trying to install Boot Camp on a fragmented drive. But you don't need to buy third-party software. All you need is a spare external hard drive and Carbon Copy Cloner.
Cheap and Easy Defragmentation
You will have to backup your OS X partition to an external drive, boot from the external drive, use Disk Utility to repartition and reformat your hard drive back to a single volume, then restore your backup to the internal hard drive. You will use Carbon Copy Cloner to create the backup and to restore it.
1. Get an empty external hard drive and clone your internal drive to the
       external one.
2. Boot from the external hard drive.
3. Erase the internal hard drive.
4. Restore the external clone to the internal hard drive.
Clone the internal drive to the external drive
1. Open Carbon Copy Cloner.
2. Select the Source volume from the left side dropdown menu.
3. Select the Destination volume from the left side dropdown menu.
4. Be sure the Block Copy button is not depressed or is ghosted.
5. Click on the Clone button.
Destination means the external backup drive. Source means the internal startup drive.
Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the external drive and click on the upward pointing arrow button.
After startup do the following:
Erase internal hard drive
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your internal hard drive (this is the entry with the
       mfgr.'s ID and size) from the left side list. Note the SMART status of the
       drive in DU's status area. If it does not say "Verified" then the drive is
       failing or has failed and will need replacing. SMART info will not be
       reported on external drives. Otherwise, click on the Partition tab in the
       DU main window.
3. Under the Volume Scheme heading set the number of partitions from the
       drop down menu to one. Set the format type to Mac OS Extended
       (Journaled.) Click on the Options button, set the partition scheme to
       GUID then click on the OK button. Click on the Partition button and wait
       until the process has completed.
Restore the clone to the internal hard drive
1. Open Carbon Copy Cloner.
2. Select the Source volume from the left side dropdown menu.
3. Select the Destination volume from the left side dropdown menu.
4. Be sure the Block Copy button is not selected or is ghosted.
5. Click on the Clone button.
Destination means the internal hard drive. Source means the external startup drive.
Note that the Source and Destination drives are swapped for this last procedure.
Malware Protection
As for malware protection there are few if any such animals affecting OS X. Starting with Lion Apple has included built-in malware protection that is automatically updated as necessary.
Helpful Links Regarding Malware Protection:
1. Mac Malware Guide.
2. Detecting and avoiding malware and spyware
3. Macintosh Virus Guide
For general anti-virus protection I recommend only using ClamXav, but it is not necessary if you are keeping your computer's operating system software up to date. You should avoid any other third-party software advertised as providing anti-malware/virus protection. They are not required and could cause the performance of your computer to drop.
Cache Clearing
I recommend downloading a utility such as TinkerTool System, OnyX 2.4.3, Mountain Lion Cache Cleaner 7.0.9, Maintenance 1.6.8, or Cocktail 5.1.1 that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc. Corrupted cache files can cause slowness, kernel panics, and other issues. Although this is not a frequent nor a recurring problem, when it does happen there are tools such as those above to fix the problem.
If you are using Snow Leopard or earlier, then for emergency cleaning install the freeware utilityApplejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. (AppleJack works with Snow Leopard or earlier.)
Installing System Updates or Upgrades
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand.
Backup and Restore
Having a backup and restore strategy is one of the most important things you can do to maintain your computer. Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Carbon Copy Cloner.
2. Deja Vu
3. SuperDuper!
4. Synk Pro
5. Tri-Backup
Visit The XLab FAQs and read the FAQs on maintenance and backup and restore.
Always have a current backup before performing any system updates or upgrades.
Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity or 20 GBs, whichever is greater, as free space. Avoid installing utilities that rely on Haxies, SIMBL, or that alter the OS appearance, add features you will rarely if ever need, etc. The more extras you install the greater the probability of having problems. If you install software be sure you know how to uninstall it. Avoid installing multiple new software at the same time. Install one at a time and use it for a while to be sure it's compatible.
Additional suggestions will be found in:
1. Mac OS X speed FAQ
2. Speeding up Macs
3. Macintosh OS X Routine Maintenance
4. Essential Mac Maintenance: Get set up
5. Essential Mac Maintenance: Rev up your routines
6. Five Mac maintenance myths
7. How to Speed up Macs
8. Myths of required versus not required maintenance for Mac OS X
Referenced software can be found at CNet Downloads or MacUpdate.
Most if not all maintenance is for troubleshooting problems. If your computer is running OK, then there isn't really a thing you need to do except repair the hard drive and permissions before installing any new system updates.

Cannot add songs bought from ITunes store on my IPad. The reason given is to Run the ITunes in to remove ITune which I do not want to do

My computer has Microsoft 8 Pavillion g 6.Dolby advanced audio, Altec.
My I Pad is retina display 32 GB I have IOS7 and ICloud
I belong to ITune Store. I can add songs bought from ITunes Store to my computer but I cannot add them to my IPad. The answer given is to Run the ITunes installer which I have had no succeeded
Florence.

You don't have any choice but to restore your phone. If the phone is still working, be sure to back up your contacts first. Since iTunes can't read your phone you can download the app My Contacts Backup, which will back up your contacts as an email attachment. Send this email to yourself; you can later open it on your phone and tap the attachment to re-import your contacts if necessary. When done, click on Restore (on the Summary tab) and let iTunes do its thing. Be careful to watch the progress information at the top of iTunes as well as your iPhone screen so that you do not interrupt the restore process until it is completes.

Mini ipad is disabled and I downloaded Itunes but the exe file will not run

mini ipad is disabled. says connect to itunes. I downloaded itunes but the exe file will not run.What to do?

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary.

Music pauses on my iPhone 5C when switching between apps or when receiving alerts/notifications sometimes (not always) and I have to manually restart the song. I'm running the latest 7.0.1 software. It's a bit annoying.

Music pauses on my iPhone 5C when switching between apps or when receiving alerts/notifications sometimes (not always) and I have to manually restart the song. I'm running the latest 7.0.1 software. It's a bit annoying.

I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

Re: On refresh of ebs DB is it necessary to run adclonectx.pl

Hi ,
On refresh of ebs DB is it necessary to run adclonectx.pl again for the 2nd node with add node option or can I simply reuse the contextfile from the first time it was cloned providing nothing has changed?
It simple terms does adclonectx.pl addnode do anything more than cloning the contextfile provided?
I have included a successfull run of adclonectx.pl when used with the addnode option for example .
Regards .

On refresh of ebs DB is it necessary to run adclonectx.pl again for the 2nd node with add node option or can I simply reuse the contextfile from the first time it was cloned providing nothing has changed?You can use the context file from the first time the database was cloned if nothing changed (hostname, domain name, directory structure, port pool, SID ..etc).
It simple terms does adclonectx.pl addnode do anything more than cloning the contextfile provided?No.
Thanks,
Hussein

Is there a way to get a version of the Garage Band app that runs on version 5.1.1? I have an iPad 1 and can't get any higher iOS. The App store is telling me that Garage Band only runs on iOS 7.

Is there a way to get a version of the Garage Band app that runs on version 5.1.1? I have an iPad 1 and can't get any higher iOS. The App store is telling me that Garage Band only runs on iOS 7.

Unfortunately the answer is still no.

I get this error when I go to imovie, I have instalerat on via appstore, but it does not work. The QuickTime components necessary to view, edit, import and export various types of films are not installed. The components included in the iMovie installer. R

I get this error when I go to imovie, I have instalerat on via appstore, but it does not work.
The QuickTime components necessary to view, edit, import and export varioustypes of films are not installed. The components included in the iMovie installer.Reinstalling iMovie.

I get this error when I go to imovie, I have instalerat on via appstore, but it does not work.
The QuickTime components necessary to view, edit, import and export varioustypes of films are not installed. The components included in the iMovie installer.Reinstalling iMovie.

Is the LV RTE necessary to run a LV created dll?

Similar Messages

Maybe you are looking for