Is the mail server down, since 6 Nov2013.
Is the mail server down, since 6 Nov2013. I can't update or send mails from my iPhone 4S.
I tried to change outgoing server gmail, it didn't help. :(
I checked, I think it's the yahoo outgoing server is having some problems...
Similar Messages
-
When I send a mail from my iPhone, it displays the mail server name to the receiver if the mail and does not display my name or e mail address. This only since upgrading my iPhone5 to iOS7. I've checked all settings etc. anyone have a solution please?
Rectory wrote:
Please can someone tell me how I can change this so when I send a mail from my phone and from the IPad that it reads from me.
You need a separate email address but you've already ruled out that solution. -
"Unable to establish a connection between WebEx and the mail server."
Hi,
I installed Cisco WebEx and integrated with our Microsoft exchange server. It showed server "UP". everything's came up and working fine after that and sudenlly i found this message "Unable to establish a connection with the mail server. Please recheck settings."
I went into the Mail Server setup to edit settings and now, it shows Server Down. Do I need to do something on the MS Exchange 2010 or from webex server ??
Any help is greatly appreciated. Thanks a lot!Every 180 seconds, CWMS verifies the connection to the SMTP server by establishing a connection on TCP port 25 (SMTP) and then sending the EHLO command followed by the QUIT command. This check is also performed once when logging into the admin web page or when browsing to System -> Servers (where the status of the mail server is displayed).
If this sequence does not complete successfully, the warning “Unable to establish a connection with the mail server. Please recheck settings.” will show in a banner at the top of the CWMS admin pages.
You can verify the connection to the SMTP server manually by using “telnet 25”.
If you have access to the CWMS unix shell be aware that CWMS does not come with the telnet command installed.
As an alternative, you can use this 3-lines script:
exec 3<>/dev/tcp/x.x.x.x/25
echo -e "EHLO\r\nQUIT\r\n " >&3
cat <&3
Replace x.x.x.x by the ip address or hostname of the SMTP server and save the script in a file, f.e.:
/* script saved in a file named ehlo */
[root@dchriste-cwms-adm1 ~]# cat ./ehlo
exec 3<>/dev/tcp/10.48.54.79/25
echo -e "EHLO\r\nQUIT\r\n " >&3
cat <&3
Then, execute it:
[root@dchriste-cwms-adm1 ~]# sh ./ehlo
The output should be similar to this:
220 *******************************************************************************************************************
250-confukdc.confuk.com Hello [10.48.52.110]
250-TURN
250-SIZE
250-ETRN
250-PIPELINING
250-DSN
250-ENHANCEDSTATUSCODES
250-8bitmime
250-BINARYMIME
250-CHUNKING
250-VRFY
250-XXXXXXXXXXXXXXXXXXXXXXXA
250-X-EXPS=LOGIN
250-AUTH GSSAPI NTLM LOGIN
250-AUTH=LOGIN
250-X-LINK2STATE
250-XEXCH50
250 OK221 2.0.0 confukdc.confuk.com Service closing transmission channel
Also, you can use this tcpdump command to see the conversation (replace x.x.x.x by the SMTP server’s IP address or hostname):
tcpdump -vXs 0 host x.x.x.x and tcp port 25
If you have HA, it is not certain which admin VM talks to the smtp server, so best to check both.
If you don't have access to the CWMS unix shell, best to span the switch ports and run packet capture. -
How can I find out the mail server from email address?
Hi:
How can I find out the mail server from email address?
for example: If I know the email address is [email protected],
how to find the pop3 and smtp mail server?
THANK YOUYou can't tell by the email address since you can pretty much put whatever you want in there (especially if the SMTP server is not filtering anything).
The header may be able to tell you something. There is a Received header value which looks like it has the routing information although I am not sure if this is a complete trace or just the last hop the message took.
Sean -
assume i have one mail server and one backup mail server
what can i do switch btw two servers if one down? I can't use ping method to check the mail server availablity....
Any signal my program can get from improper work of mail server?public static boolean checkMailServer(){
boolean flag = true;
try{
Transport transport = (HtmlEmail.session).getTransport("smtp");
transport.connect();
} catch (Exception e){
flag = false;
return flag; -
Hi! The Mail icon on my iPad is no longer responding! A message comes up saying - ' Cannot get mail...the mail server imap.gmail.com is not responding. Verify that you have entered the correct account info in Mail settings'. I have tried this and everything is correct! It is puzzling because I can still get my gmail through Google search! Can you help?? Thanks
iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
Cheers, Tom -
Can't setup Gmail account - "Mail couldn't discover the account settings for the Mail server "
Since upgrading to Yosemite I can't add one of my gmail accounts.
It's my business domain which is hosted with GMAIL. It worked before the upgrade. Now adding the email address in 'internet accounts setup' I get the message "Can't setup Gmail account - "Mail couldn't discover the account settings for the Mail server "
Mail will not let me setup an email account directly in mail either.
There seems to be major problems with mail in this update.
Also SMTP keeps failing.
Yosemite is a disaster.Try this. I saw this solution elsewhere on the boards here.
When setting up a business gmail account, something other than @gmail.com, when you try to add the account in Mail preferences, don't select Google as the account type. Choose, "Other." Fill out the name, email and password as usual. Worked great for me after having similar issues trying to get my business gmail account to work in Yosemite. -
Is iCloud @me mail server down?
Is icloud "@me" mail accounts down today? I tried to sign on and got this message...
"There may be a problem with the mail server or network. Verify the settings for the account "iCloud" and try again. The server returned the error: The connection to the server "p01-imap.mail.me.com" on port 993 timed out." And then it gave me the option to report it to Apple, which i did.
My icloud settings are correct because I can access all other content
on icloud (contacts,calander, etc).... It's just mail that won't load.
anyone else having this issue?My outgoing email sever isn't connecting when I try to send email on an Android phone.
Is this a case of Apple presuming that their customers only use iOS devices?
It's such a pain in the butt! -
Interesting db mail issue. If i click send test mail from sql mgmt studio, it works fine, but when i execute a SP to send a mail, it fails. One thing I noticed is that the "LastModified" column in the mail log shows the domain account when a test
mail was sent from mgmt studio, but show "sa" when the SP was used to send mail.
This is from SQL 2012, did not see this in sql 2008, looks like 2008 always used the service account. any ideas ?
Get this error:
The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 1 (2013-04-30T16:36:52). Exception Message: Cannot send mails to mail server. (Mailbox unavailable. The server response was: 5.7.1 Client does not
Thanks.
RangaHi Ranga,
I also use SQL Server 2012. I send a test email through SQL Server Management and the last modified By “sa”.
If you used stored procedure to send a test email. Please use the command below:
EXEC msdb.dbo.sp_send_dbmail
@profile_name = 'Adventure Works Administrator',
@recipients = '[email protected]',
@body = 'The stored procedure finished successfully.',
@subject = 'Automated Success Message' ;
I can both send test email through SQL Server Management Studio and SP. Make sure you have the right profile. Since you could send test mail via SQL Server Management Studio, please try again to send it via SP.
Thanks.
If you have any feedback on our support, please click
here.
Maggie Luo
TechNet Community Support -
Problem: Mail couldn't discover the account settings for the Mail server "Unknown"
I have a problem setting up my internet accounts on the System Preferences.
This message always comes up,
Mail couldn't discover the account settings for the Mail server “Unknown”.
ThanksIn Mail's Add Account dialog, enter the account information, then hold down the option key and click Continue. Finish setting up the account manually.
-
I can send but cannot recieve email
This is the messege I am gewtting:
There may be a problem with the mail server or network. Verify the settings for account “MobileMe” or try again.
The server returned the error: Mail was unable to log in to the IMAP server “p02-imap.mail.me.com” using “Password” authentication. Verify that your account settings are correct.
The server returned the error: Service temporarily unavailableAlso if I go to system preferences accounts and re-enter the password it fixes the glitch sometimes.
-
I am trying to create another email account with Talktalk. I already have one account.
I try to input the new email address and password and get a failed message
'Mail could not lot into the mail server talktalk.net.
I have tried several times and keep getting the same message.
Any ideasAccessing your emails from any computer connected to the Internet or from a Smart phone should be straightforward.
For help on how to set up your e-mail on some of the most common software applications and devices, see How do I set up my TalkTalk email?
If your software application or device isn't listed, all you need to connect to your TalkTalk e-mail mailbox are the TalkTalk e-mail settings. Make sure you use the right email settings for your specific email address.
TalkTalk email addresses only
Login / Username
[email protected]
[email protected]
Incoming mail server
mail.talktalk.net
mail.talktalk.net
Incoming Port
110
143
Outgoing mail server
smtp.talktalk.net
smtp.talktalk.net
Outgoing Port
587
587
Outgoing SSL
Yes
Yes
Outgoing Authentication
Yes
Yes -
Text limits to the "Question" link prevents a full explanation:
This is a long-time problem. I have tried to resolve it with Apple but their "Customer Support" is merely a name.
I can go online and access my e-mail but when I try to send or receive e-mail via iCloud through my internet server (Google fiber now but the same situation existed with my prior service), I receive "There may be a problem with the mail server or network. Verify the settings for 'Apple Email' and try again.
"The server returned the error: The server 'p0-imap.mail.me.com' refused to allow a connection on port 143."
Well, I have verified the setting and tried again and again and …
Well, you get the idea …JungleTaxi Cabbie wrote:
Csound1: iCloud: Configuring Mail with Mac OS X v10.6 or iOS 4
Enter your Incoming Mail Server, User Name, and Password using the following settings:
Incoming Mail Server: mail.me.com
User Name: Your iCloud email address (excluding @me.com)
Password: Your password
Last Modified: Jun 27, 2013
Maybe you should test these things before calling people out, because these settings do function perfectly well.
iCloud is not supported on Snow Leopard or lower, why bother to mention it?
The OP has an iCloud account, and that can not be opened without Lion or Mountain Lion (on a Mac), IOS5 or 6 (on an iPhone/iPad)
The document I linked to is Apples documentation for iCloud on current devices,I don't care whether you believe that you know better than they do, but it will affect the people who follow your advice as it won't work
JungleTaxi Cabbie wrote:
Also, if you're not running Lion or Mountain Lion, there is no "Mail, Contacts & Calendars" prefpane.
I never said that there was, perhaps you imagined it. -
MacBook Pro, late 2011 version. Up to date Mountain Lion.
My email account in the Mail.app is set up as IMAP, but when I delete emails in the Mac Mail App, they are not deleted from the mail clients of the other devices that are connected to the mail server with IMAP. IMAP works perfectly between Windows Outlook 2010, iPad Mail App and Android default mail client. Deleted messages behave correctly, as in delete from one device and the mail is deleted from all devices.
Having just tested in reverse order on the Mac; emails deleted from the email client on Windows, iPad and Android are not deleted in the Mac Mail App. It appears that the account is behaving like POP rather than IMAP.
Any advice on how to have IMAP work correctly on the MacBook Pro Mail.app?
Thank you.Hi Csound1, thanks. The email host is 1and1.co.uk, however, i am going to fess up and make myself look like a plonker now -
the email account in question was set up in Outlook as POP - stupid, stupid, stupid me, wasted an afternoon on this! I have now changed the Outlook account to IMAP and Mail.app works perfectly - and looks much nicer than Outlook did. Im in the middle of converting from Windows to a Mac, and still finding my way around the Mac
The lesson learned, never assume - always double check! All my other email addresses with 1and1 are all imap, except this one, and it happened to be the first one I set up in the Mail.app. (bows head in disgrace!)
Thank you anyway for attempting to help me!
Cheers -
HT1277 Multiple accounts on same domain in Apple Mail blocks connection to the mail server.
I am trying to run two separate mail accounts on my Mac in Apple Mail, both using the same domain name. I don't want to use aliases because one is a personal mail account and the other is a helpdesk one, with different signatures. I also want to keep emails for those accounts separate.
I can get the first account working fine. When I add the second account, Apple Mail tells me it can't connect to the mail server for either account. As soon as I remove the second account, the first account starts working again.
Anyone know why this might be?
The mail server is Postfix running on a Linux server. My Mac is running OS X Lion v10.7.5.
The mail accounts are IMAP - I also access them from my iPhone 3GS (iOS 6). Again, I can get the first one working from the iPhone, but as soon as I add the second one it falls over.If the email service you were trying to connect to was an icloud email account, then the outgoing server can't possibly be right (yahoo.com???). If it's to yahoo, then the "apple.smtp.mail" part certainly looks suspicious. Are you sure the server address wasn't changed at some point?
So the first question for you is.. which email service were you trying to use? Yahoo or icloud (or something else)?
Maybe you are looking for
-
What is Airport Utility and why do I need to access Airport witeless devices in order to backup my iMac using Time Machine...HELP!!! PLEASE??
-
IOS 8.0.2 problem with 5-finger multi touch
I use an iPad 2, and since i updated it to 8.0.2 the multi touch task (like closing an app or switching between apps) doesnt work most of the time. And native keyboard works poorly too. Am i the only one having these issues?
-
Obtain Array from an XML file with Multiple Arrays
Hi, So I have been struggling with this program I am making for the last few months but I am almost there. I have a program that creates multiple arrays and place them one after another in an xml file and each array has its own unique name. Now I wou
-
EA4500 router and media server file limit
I purchased an EA4500 router yesterday and it arrived today. Set it up, copiued my media library over to a new Seagate Expansion drive (2 TB) and it currently is filled with 320GB of files. Music folder, Pictures folder and Video folder. Thing is onl
-
Empty Events, Everything! PLEASE HELP!
Hi Guys, I recently tried opening my iPhoto to find that all of my events and albums are empty! They are all still there, and organised, and named in the same way as when I was last looking at them, but when I open an event, the only photo in there