Is the new Firmware version of 5800 supports VoIP?

I want just want to ask for those whoe already updated their 5800 to version 40 firmware if their phone already supports VoIP. I've read on some forums that Nokia 5800 doesn't support VoIP. Is the new update already have like the VoIP support of N97?

mj_monserrat wrote:
I want just want to ask for those whoe already updated their 5800 to version 40 firmware if their phone already supports VoIP. I've read on some forums that Nokia 5800 doesn't support VoIP. Is the new update already have like the VoIP support of N97?
No, it's voip capabilities are exactly the same as previous firmware versions so it still does not support true native voip like the N97 does.
The 5800 is highly unlikely to ever receive this feature.  As before you will need to use a program such as fring or nimbuzz for voip on the 5800.

Similar Messages

  • When we can upgrade the new firmware version(v5.07...

    PLEASE REPLAY SOON

    10-May-200706:04 AM
    adilss wrote:
    You can upgrade immediately. I upgraded mine by following instructions from the Nokia website
    That's not necessarily true: it depends on whether your network's version is available.
    Some networks are not so good at supporting firmware releases, for example I have an N80 on Vodafone and the latest firmware version available for my phone is two releases behind what's available for other N80 users.Message Edited by patc on 10-May-200711:15 AM

  • Whats the new firmware version c0de number of N73

    Hi Guys can u let me know how to find nokia N70 manufacturing date

    He's asking for the manufacturing date, not how to check the firmware version...

  • Slow startup after installing on my StorCenter ix2-200 CE the latest firmware version 3.2.10.30101

    Hi,
    After installing some weeks ago the new firmware version 3.2.10.30101, the startup of my device is taking consistently around 45-60 minutes to be full operative, accessing to its web interface or being mapped and available the different disk units that i have configured.
    What about the corresponding warranty that should have the new firmware? If it has being published and recommended by Lenovo, it should have the corresponding period of warranty.
    So:
    1.- Has the root cause been detected? Should we have a new firmware version solving it? Because it seems downgrade to previous firware version is not possible.
    2.- Could you confirm a possible workaround? Disconnect network cable and startup device till consisten white led...?
    3.- For an alternative solution, can it help to rewrite this firmware version? How is the procedure?
    4.- Does full factory reset help? If yes, i can look for making a backup, and try it.
    Waiting for your suggestion of next steps.
    Thanks for your support.
    Javi

    Hello jdehoyosr
    My answer is still the same.  You would not have been able to factory reset the unit and retain your data without backing up the data first.  I have already clearly explained that the backup and restore feature could have allowed you to backup your settings/configurations to be restored after the factory reset.  You would have still needed to restore your data from the backup after the factory reset regardless if you had used the configuration backup and restore option for your settings.  
    The configuration backup and restore would not have been able to the firmware glitch that you were experiencing.  If would have had a previous backup file, it would only have applied settings that you had previously backed up. Depending on which restore option was picked it could have also wiped your data.  
    LenovoEMC Contact Information is region specific. Please select the correct link then access the Contact Us at the top right:
    US and Canada: https://lenovo-na-en.custhelp.com/
    Latin America and Mexico: https://lenovo-la-es.custhelp.com/
    EU: https://lenovo-eu-en.custhelp.com/
    India/Asia Pacific: https://lenovo-ap-en.custhelp.com/
    http://support.lenovoemc.com/

  • Nokia N96 New Firmware Version 30.033 and Camera F...

    I updated my Nokia N96 to the new firmware version 30.033 after which my phone camera is not working. When I press on the camera button it gives the message (Camera Feature not Supported). I played many tricks with it but of no use. I reset my phone to the original factory setting through (*#7370#) and Multi-finger process but of no help. I even reinstalled the updated version but the problem still persists. My camera worked fine before the update but now it gives the said message and the phone hanges up on pressing the camera button. I request nokia developers to help fix this problem and check their updates for buge before uploading them to the server to save users from problems & worries. If you found any solution for the problem then please let me know it on my E-Mail ID:  I will be grateful for your response. 
    Message Edited by Kay_Cee on 12-Jan-2010 03:40 AM

    hlepcha wrote:
    Kay_Cee
    You told everything about the firmware upgrades and the non-functional camera features.
    I did everything [firmware re-installation, hard-reset etc. etc.] to get my camera features back. This includes visiting the authorized Nokia service centre and paying them bucks.
    No luck buddy. I may have an ardent brand loyalty to Nokia but Nokia is letting me down every way.
    Any luck buddy? 
    you should not have had to pay a nokia care point for what ammounts to a warenty repair,
    The camera issue with the N96 upgrade is an uncommon but known bug,
    If a hard reset, or a firmware reinstall doesn't fix it then take the phone to a nokia care point and have them fix it for free under the warenty

  • New Firmware version

    The new firmware version it's ok for my apple tv 2 too?
    At the moment i have the 6.2.1 version.
    Thanks

    It seems that only the Apple TV 3 will update to Apple TV software version 7 (iOS 8).

  • When will come the new raw version update for Adobe Lightroom 4 with Nikon D750 support?

    Hello Adobe,
    When will come the new raw version update for Adobe Lightroom 4 with Nikon D750 support?
    Best regards
    Frank

    There won't be an update for Lightroom 4. The only way you can work with your D750 raw files is to use the free standalone DNG converter to create DNG copies. If you want to be able to work on the NEF files then you will have to upgrade to Lightroom 5. Lightroom does not use the Camera Raw plug-in. Everything is part of the Lightroom program. If you want to stay current with Lightroom then you need to follow the update/upgrade path. That means purchasing each new major version of Lightroom or subscribing to the creative cloud plan.

  • Will appear a new firmware for nokia 5800?

    one question ... will appear a new firmware for nokia 5800 will soon ? Thnx !

    It's not about old or not, it's about that productcode which is under your battery. Take a look here, and follow the instructions. If there is not an update available, you just have to wait.
    http://europe.nokia.com/support/download-software/device-software-update/can-i-update#

  • What was the last firmware version for the Zen Micro before M

    I would like to know what was the last firmware version for the Zen Micro before the MTP firmware?
    Please make sure you are 00% on this.
    Thankyou.

    I think it does, but I'm not sure; since I wanted MTP, I only used .x firmware long enough to save the original Creative test files (with MediaSource, not ZMME) before upgrading to 2.x. And yes, I had to li've with 2..02's shorter battery life until 2.20.05 came out.
    May I ask why you want to go back to .x firmware? The only thing that will get you is the ability to use it with Win98SE/2000/Me--but only if you can install Creative drivers on every PC you use it with. MTP requires WinXP SP or 2 and WMP 0, but doesn't need any Creative software at all to work. (Microsoft has made an MTP driver for Win98SE/2000/Me, but it requires customization and may not be supported by other software. I'm tinkering a bit with the customization part right now.)
    There are other pitfalls in changing Micro firmware families, in either direction--you'll lose all the files on your Micro, you'll have to install a different ZMME (and I've heard non-MTP ZMME isn't quite as full-featured as MTP ZMME), and you'll need a new plug-in for MediaSource to work.

  • NEW Firmware Version 6.01

    All,
    We are releasing version 6.01 firmware for the F5, and F55 motion picture cameras. Thank you for your feedback in discovering the S/Q, Center Scan issue.
    When S&Q setting was set “On” in 2K Center Scan mode or 2K Full Scan mode and the power was turned Off and On, Recording did not work. This update fixes it.
    This update includes all other features and functionality as posted in the previous version 6.0 announcement
    http://www.community.sony.com/t5/F5-F55/NEW-Version-6-Firmware-F5-and-F55/m-p/506807#M28137
    PMW-F55/F5 Firmware Version V6.01 Release note
    June 30th, 2015
    This document explains about firmware update of PMW-F55 V6.01 from PMW-F55/F5 V6.00. The latest firmware version of related products is below.
    Product name
    Latest firmware
    Release date
    PMW-F55
    V6.01
    This announcement
    PMW-F5
    V6.01
    This announcement
    AXS-R5
    V4.1
    Aug 8th, 2014
    AXS-512S24
    V1.2
    June 5th, 2013
    AXS-A512S24/A1TS24
    V1.0
    Mar 17th, 2014
    AXS-A256S24
    V2.0
    Mar 26th, 2015
    AXS Utility Software
    V1.3
    Feb 28th, 2014
    RAW Viewer
    V2.2
    Feb, 28th, 2014
    This firmware can be updated from V6.00, V5.11, V5.10, V5.0, V4.12, V4.11, V4.1, V4.0, V3.0, V2.11, V2.1 and V2.0. When you want to update F55 and F5 from V1.22 and earlier, you must update to V2.0 first. https://community.sony.com/t5/F5-F55/NEW-Firmware-release-Version-2-0/m-p/195623#M6582
    Regarding the procedure and functions about V2.0, please refer to “PMW-F55/F5 Firmware Version V2.0 Release note” which was released on Oct 4th, 2013. And F55 and F5 must not be downgraded to previous versions after updating to V2.11. We couldn’t guarantee any troubles after downgrading. An “All File” generated by a previous firmware version can be loaded to V6.01 of F55 and F5.  
    NOTE:
    The new Firmware V6.01 for PMW-F55/F5 is only compatible with AXS-R5 running with Firmware V4.1. If your AXS-R5 has installed an older version, please update to the current Firmware V4.1 the same time. https://community.sony.com/t5/F5-F55/NEW-F5-F55-Firmware-Version-v4-11-and-AXS-R5-v4-1/m-p/410782#M19813
    <<Modification from V6.00 of F55 and F5>>
    Bug Fix
    When S&Q setting was set “On” in 2K Center Scan mode or 2K Full Scan mode and the power was turned Off and On, Recording did not work. This has been fixed.
    Sometimes specific All Files could not be loaded. This has been fixed.
    <Notification we would like to share>
    iOS setting for Wi-Fi Remote
    While using Wi-Fi Remote by iOS devices and Safari, please turn off Private browse function.
    All file Support
    All files which are created with Firmware V6.01 are not compatible with an earlier firmware version.
    << Version up procedure >>
    Please refer to “Version Up Guide for PMW-F55 and F5” - documents are below for download
    Firmware download:
    F5
    http://pro.sony.com/bbsccms/assets/files/show/highend/downloads/PMW-F5_V601_6.01_4_2015-06-24_14-42-14_firmware.zip
    F55
    http://pro.sony.com/bbsccms/assets/files/show/highend/downloads/PMW-F55_V601_6.01_5_2015-06-24_14-42-07_firmware.zip
     

    Hi, AlexK. I just found the answer for your question in F5/F55 user manual(v.6), on p. 46.In a word, you can't use your double speed viewfinder function.Refer to the last sentence.  Viewfinder Double Speed function is not effective on the following settings.- When System Frequency is 59.94/50.- When Recording format is SStP Sr-SQ 444 / SStP SR-SQ Lite 422 / SStP SR-SQ 422, ProRes 422, DNxHD 220x / DNxHD 145.- When "Setting" in "Slow Shutter" of the Camera menu is set to "On."- When "Setting" in "S&Q Motion" of the Camera menu is set to "On," and the "Frame Rate" setting is 1 to 60P. At this moment, it's not available to everyone.Hope Sony make it available with future firmware update, if technically possible. Bryan

  • What is the latest firmware version for iPod Photo?

    I got a iPod Photo 60Gb and try to connect this to my Ice Link Gateway 500 in my car. It work fine on my other car using icelink but doesn't work with the new one. It say it does support iPod Photo. I wondering what version should it be on?.. I test other iPod Nano that work fine on it. I guessing it doesn't detect the gateway 500 as it automatic show up on iPod Nano screen. Where my iPod photo saying It is ok to disconnect.

    What is the latest firmware version for iPod Photo?
    1.2.1.

  • What's the latest firmware version for the Xperia Tablet Z?

    What's the latest firmware version for the Xperia Tablet Z?
    According to the Swedish and British Sony website, the latest version for the Xperia Tablet Z is 10.1.1.A.1.253 released on 17th of May.
    But this is the latest version for the Xperia Z (phone) not the tablet Z... Or am I wrong?
    It's a bit confusing, when the manufacturer cannot keep track of the phone and tablet...
    Solved!
    Go to Solution.

    Depends on if you have the WiF version or the LTE version. For LTE the latest is 10.1.1.A.1.253 and for WiFi it's 10.1.C.0.344.
    What are your thoughts about this forum? Let us know by doing this short survey.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • New firmware version is out for Megastick 128

    There is a new firmware version (2.05)  for the Megastick 1 (128). Get it from Megastick 1 firmware page

    I upgraded it and didn’t see any major differences. However now there are many volume steps. Apart from that I noticed that when the radio is not tuned to a proper channel there is no noise, not a useful thing but those are the only differences I saw. Still cant record in 44k (records in 22k format). Anyone tried it and saw anything different ?
    One other thing, I don’t know whether this existed in earlier firmware versions, when you have a normal file which is not an MP3 file with the .mp3 extension you cant turn it on. I came across this when I tried putting several non MP3 files (ogg ) having the mp3 extension after .ogg didn’t work to see whether they have added support for new standards (Slim chance but who knows…   )

  • Does the new firmware,1.02.05 has M

    Hey, i really want to know if the new firmware has MTP? And if i dont like, can I then go back to the 2.XX.XX firmware?
    Is the new <FONT color=#333333>.02.05 firmware good?

    It's brand new. Here's the description from the Downloads page:
    Creative Zen Micro Firmware .02.05ZENM-FWPDE-2-LB
    This web release enables you to upgrade the firmware for your , 4, 5 or 6GB Creative Zen Micro player.
    You can upgrade from Creative Zen Micro firmware .0.03 or earlier, or Zen Micro PlaysForSure? firmware 2.00.2 or later. After upgrading, you cannot go back to a previous Creative Zen Micro firmware version.
    It has been reported by some of our customers that they have experienced reduced battery life after charging their Zen Micro. Our product development team has researched these reports and determined that the users may have experienced this after they plugged their Zen Micro into the AC adapter that was already inserted into a wall socket with the AC power on.
    While this is not the conventional way to plug in a player for charging, we wanted to ensure that our customers did not experience this problem, so we have developed a solution to address this, which simply involves upgrading the Zen Micro's firmware.
    If you need assistance in doing this, please contact our customer support team and they will be happy to assist you.
    Important: If you are upgrading from PlaysForSure firmware, be sure to back up all the audio and data files on your Zen Micro before installing this firmware update as all content will be <I>lost</I> when you install the new firmware. After installing the new firmware, use Creative MediaSource? to restore audio and/or data files to your player.
    <EM>Enhancements</EM>
    Improves the look of the volume control bar</LI>
    Improves the appearance of the Lock icon</LI>
    Adds a 4GB option in Removable Disk Mode (for 5 or 6GB players only)</LI>
    <EM>Fixes</EM>
    Prevents battery drain when the player is charged with an AC adapter already plugged into a li've power outlet</LI>
    Restores proper functionality after disconnecting the power adaptor or transferring content using Zen Media Explorer</LI>
    Redirects playback properly when skipping to the beginning of a WMA track</LI>
    <EM>Requirements</EM>
    Microsoft? Windows? XP, Windows 2000, Windows Millennium Edition or Windows 98 Second Edition</LI>
    USB port (2.0 or .)</LI>
    Creative Zen Micro</LI>
    <EM>Note</EM>
    To install the new firmware in your Zen Micro
    Download ZenMicro_PCFW_LB__02_05_PDE.exe.</LI>
    Connect your player to your computer.</LI>
    Double-click (filename).</LI>
    Choose your language.</LI>
    Click the Upgrade button and follow the instructions that appear.</LI>
    To check your player's firmware version, see your Zen Micro User's Guide.

  • I am getting an error message when I try to update to the new iTunes version

    I am having issues updating to the new iTunes Version 11.4

    To everyone that is having this problem:
    I just ended a 2 hour session with Apple Tech Support.  We had to take it to a level 2 support person, but finally got it running.  Here's what she had me do.  Go to Control Panel, Add/Remove Programs.  Uninstall ALL Apple products on the Computer.  This inccluded Apple Mobile Device Itunes, Bonjour and Quicktime.  I doubt if we would have had to but she had me download a fresh copy of iTunessetup.exe and run it.  iTunes came up and ran on version 11.1.4.  Then I reinstalled Quicktime.
    It is my personal opinion that there is a flaw in version 11.1.4.  You shouldn't have to go through all of these hoops just to update a single application that was working fine proir to the update attempt.
    That's what worked for me.  Hope this helps you.  Any questions, get back to me.
    Good Luck.

Maybe you are looking for

  • Music attached to accounts that no longer exist

    I just put my itunes library on my new computer after my old one died and now I can't put half of my songs on my IPOD because it is attached to an old account that no longer exists but it says I have to authorize that account in order to hear my song

  • KeyBoard Lights

    Can I send my mac air in and get the keys that are backlited installed ?

  • Labwiew 8 won't start without internet connection

    I have Labview 8.0 installed on a NI PXI-1050 chasis with Windows XP and Service Pack 2 installed.  The problem is that Labview will not load up (it locks up at finishing initialization) if I do not have the chasis connected to the internet via ether

  • YTD, QTD and Year grain metrics = ORA-00942: table or view does not exist

    Hi everyone, I'm having a weird issue. I've got some GL data that I want to report on in three different grains: Quarter To Date, Year To Date and Entire Year. For the first two measures, I've setup a time dimension and I'm using the ToDate function.

  • Convert old labview file

    Hello, I have an old labview file created with 5.1 version. Currently I am using Labview 10.0, Could anyone convert the attached file to a newer version? Many thanks!! Solved! Go to Solution. Attachments: AnaECP_REG.vi ‏310 KB