Is the new nvidia geforce driver 340.52 compatible with premiere elements 11?

Has anybody using PE11 with Windows 8.1 x 64 tried the new nvidia driver version 340.52 released end July? Are they compatible? Does the preview screen work well? - Regards, Phil

I meant to ask about compatibility when editing hd AVCHD files, but replies regarding the new driver and standard definition, mini dv, other versions of Windows, etc, etc, will also be helpful to other users - Phil

Similar Messages

I accidentally deleted Garageband on my MacBook Pro, version 10.6.8. The new version of Garageband is only compatible with 10.9 and above. Is it possible to still get the older version? OR, can I get another copy of the startup CD for my computer

I accidentally deleted GarageBand on my MacBook Pro, version 10.6.8. The new version of GarageBand is only compatible with 10.9 and above. Is it possible to still get the older version? OR, can I get another copy of the startup CD that came with my computer so that I can reinstall GarageBand?

The new version of GarageBand is only compatible with 10.9 and above.
If your Mac can run MacOS X 10.6.8, it probably can be upgraded to Yosemite, if you don't have to stick to Snowleopard for other reasons.
Is it possible to still get the older version?
Amazon or eBay are still selling iLife '11 installer disks, and you could reinstall GarageBand from these DVDs. But it will be expensive.
Have you checked your backups, if you can restore GarageBand from a backup?
OR, can I get another copy of the startup CD that came with my computer so that I can reinstall GarageBand?
Sometimes the AppleStore Support will replace missing installer CDs for a fee.

Are the newer ipod classics (80GB and above) compatible with docks for the older ipod classics (20GB)?)

are the newer ipod classics (80GB and above) compatible with docks for the older ipod classics (20GB)?)

I have an iPod Touch 2 with iOS 4.2.1. This is the highest version that works on this device. I checked it once and it had to do with iOS 4.3 and above only supporting the higher RAM CPUs on newer devices.
Apple does make it harder than it needs to be. There still remain a number of apps available on iTunes that will work but they are hard to find because you must manually look at each app specs to see if the app supports an iOS below 4.3
App backups are your friend since iTunes has no way to keep older version of apps.

Is nvidia geforce gtx 675mx card compatible with fcpx

Is the Nvidia geforce gtx 675mx comes with the new iMac 27" compatible with fcpx?
I could not find it on Apple's list of cards required or fcpx

It should be.
I have only heard about issues with the 640mx card..
But FCPX uses OpebCL and other system API's to use the GPU, so if someting is not working, it should be the OS having issues..

Is the power rating of the new ipad 3 wi-Fi 4G compatible with Nigeria power supply?

I want to know if the new apple ipad 3 wi-fi + 4G is power rating is compatible with 100-240volts that is available in my country.

The iPad charger is rated from 110V to 240V and 50/60Hz. It should not be a problem.

Multiple Hard Drives for Video Editing with Premiere Elements 8?

I'm using Premiere Elements 8 for video editing. These are the specs I'm using:
The camcorder I used to shoot the footage is a Sony Handycam with model number HDR-SR12. It's a digital HD video camera recorder that shoots in NTSC 1920x1080i HD recording. The footage was shot with AVC HD 9M (HQ), which records in higher image quality mode. The video camera is connected to my computer through a USB cable.
The computer itself is a Windows 7 desktop computer. The CPU is an HP Pavilion Elite HPE-150f PC with Intel Core i7-860 processor. I imported the video into Premiere by selecting "File" --> "Get Media From" and then choosing the third option from the top.
My import option is NTSC/AVCHD/Full HD 1080i 30 5.1 channel, which matches the specs of the camera I shot the footage with.
Even with the patch 8.0.1 that should be preventing crashing, the program keeps crashing upon startup with one specific video project. Using the exact same video files for that project, I recreated the video, with Elements, and never ran into the problem. Both times, I had the patch installed.
At the moment, I am using only the single internal hard drive for everything (software, OS, video editing, etc.). It is 1 TB in size. However, I am informed that one hard drive is not recommended for video editing, and that I need at least two hard drives, one for OS and one specifically for video editing. I was also informed of FireWire 800 and eSata; however, it does not appear that my computer supports eSata.
Can this problem be resolved if I have an external hard drive and connect it to my computer with FireWire 800 (which the computer supports)? If not, what can be done so this problem doesn't arise in the future?
Thanks for the help.

staring-into-space wrote: My import option is NTSC/AVCHD/Full HD 1080i 30 5.1 channel, which matches the specs of the camera I shot the footage with.
When you import the footage is there a red line across the whole of the timeline?
staring-into-space wrote:
I recreated the video, with Elements, and never ran into the problem.
As you have the recreated project working fine I'd be inclined to put this down as a one-off glitch. If it happens again on a different project then it may be more worrying. You may want to consider using save-as to create multiple versions of your project (note this does NOT duplicate the source clips - so you won't be eating up much extra disk space). You could for example use save-as to create a daily version - ProjectName-Mon, ProjectName-Tue etc....
Cheers,
Neale
Insanity is hereditary, you get it from your children

How do I install the additional content file (PRE7_Cont_WWEFGJ) that I downloaded with Premiere Elements?

Additional content for Premiere Elements 7 can be found by following the link in the article linked to at the end of this FAQ.
You'll need to log in to your Adobe account, and then you'll see the link to the download on the same page as the Free Trial download.
John Venediger received this from Tech Support, based on his problem installing additional content (including templates and themes):
When trying to install/open the contents file (PRE7_Cont_WWEFGJ) you get this message - The setup has detected that premiere elements is currently in use. Please close Premiere Elements, then launch setup again despite the fact that Premiere Elements is not in use.
To resolve this issue, please perform the following steps:
1. Right-click the Microsoft® Windows XP® taskbar and select Task
Manager.
2. Under the Applications tab of the Task Manager, please ensure Adobe
Premiere Elements or Photoshop Elements is not running in the background.
3. If Adobe Premiere Elements or PhotoShop Elements is running in the background, please
select the application and press End Task.
4. Next, switch to the Processes tab and look for a process named Adobe
Premiere Elements.exe. and Photoshop ElementsEditor.exe.
5. If Adobe Premiere Elements.exe or Photoshop ElementsEditor.exe. is running, please select the process and press End Process.
If you are still unable to install the additional content, please refer
to our knowledge base document kb404997. Perform step 8 and try the
installation again. Continue to step 7 if necessary. To access the
document, simply copy the following and paste it in the address bar of
your web browser:
http://www.adobe.com/cfusion/tdrc/index.cfm?loc=en_us&product=premiere_elements

Give Adobe Support a call or contact the TCS team at [email protected] - something in your environment is causing the installer to fail (I'd guess).

New JVC GY-HM100u won't work with Premiere Elements 4...?????Help

Does anyone know if, and why Premeire Elements 4 w
ill not work with JVC GY-HM100U camera?
The video uploads into premeire 4, but I have no audio. Please help.
Eric

Eric
You really need to define what you are recording with that JVC camcorder and trying to edit in Premiere Elements 4. Are you recording AVCHD (represented as MPEG4 AVC/H.264) and frame size 1920 x 1080 30 frames per second OR 1440 x 1080 30 frames per second OR what might be AVCHD Lite (MPEG4 AVC/H.264) but with the lesser resolution of 1280 x 720, 30 frames per second?
AVCHD is not supported by Premiere Elements 4. AVCHD support for Premiere Elements exists for versions 7 and 8. There is a special case where, with certain Sony Vaio and Sony Add On, you end up with AVCHD support for your setup. As I recall, in the days of Premiere Elements 4 users who did not have this special Sony Vaio, they needed to convert the AVCHD to a non AVCHD format in order to work with it in Premiere Elements 4.0 (with 3rd party software).
To avoid the speculation, best to download and install the first utility named gspot and give us a read out for Video Codec: Name: Status; Audio Codec: Name: Status; frame rate, frame size, etc. Be sure to indicate what the file extension is for these videos (.mov, .mp4, .m2t, .mts, .m2ts, or other.
http://www.headbands.com/gspot/v26x/quick_start.html
From what I have read this camcorder does not record SD, but is probably recording AVCHD and HDV. If I am on the right track with this one, have you taken time to look at Premiere Elements 4 with other JVC formats, like HDV, besides whatever you are using now?
ATR

What is the normal gaming temp of the new NVidia GeForce 750m? Mine is running at like 75c playing DAYZ on bootcamp?? Is this safe?

I'm concerned =/
Running on 2880x1800, the game runs smooth, but it gets really warm and the fan gets loud =/
checked it with speedfan, 75c =/
playing plugged into the charger, and running windows 7 ultimate. 64bit
thanks for the input

860M is a good GPU. I would like to know if this is one of your first gaming laptops?
My suggestions -
1) Play games at 1080p (max). The GPU you have cannot handle games at a resolution more than that.
2) In most games, you will have to know the graphical settings and turn down the most demanding settings.
(such as Ambient Occlusion, Post Processing FX, Tessellation etc,) You need to learn what these effects are how they affect your system.
3) Take care of your system, like benchmark a game before playing to prevent overheating.
4) Make sure the game you are trying to play is stable and optimized (otherwise you wont get the performance you want)
5) Change desktop resolution to 1080p, adjust font and size sliders in Windows settings for optimal experience.
If you want specific advice for an issue, let me know. Have a nice day.

EnzoMatrix: NEW 256 Nvidia GeForce Driver Due May 24th

The 256 Nvidia Video driver (that covers both desktops and laptops) is due out May 24th. I am really hoping that support for our; 760i and 9800 S will be included. Here is the article:
                               256 Nvidia Video Driver Launch & 3d Vision Postponement
Yeah, they have pushed back the 3-D Vision Surround support until the June or July release of the 256 branch driver. If I am reading between the lines right (and I hope I am) it looks like Nvidia is FINALLY going to start a regular Monthly  driver release, like ATI has been doing for years and years. Monthly releases keep up with newer games and advancing technology (like DX 11). Let's all send out Happy Thoughts to Nvidia supporting monthly driver releases!!!

Ahead of schedule, Nvidia released 257.21 WHQL today! Here are the links:
                                                Nvidia 257.21 Win 7-Vista 64bit 257.21 WQHL Driver
                                                Nvidia 257.21 Win 7 & Vista 32bit WQHL Driver
Most suprising is that that they only support desktops and not desktop/laptop as Nvidia indicated this 256.xx family of driver would. Mayhaps there are a lot more problems with the all inclusive driver than they had anticipated. Here is more infomation on this driver:
This is the first driver release from the Release 256 family of drivers (versions 256.xx to 259.xx). This driver package supports GeForce 6, 7, 8, 9, 100, 200, 300, and 400-series desktop GPUs as well as ION desktop GPUs. Learn more about Release 256 drivers here .
New in Version 257.21
Adds support for Blu-ray 3D with NVIDIA 3D Vision technology. Learn more about the hardware and software requirements here .
Increases performance for GeForce GTX 400 Series GPUs in several PC games. The following are examples of some of the most significant improvements measured with GeForce GTX 480. Results will vary depending on your GPU and system configuration:
Up to 14% in Aliens vs. Predator (1920x1200 noAA/AF – Tessellation on)
Up to 4% in Batman: Arkham Asylum (1920x1200 4xAA/16xAF PhysX=High)
Up to 5% in BattleForge (1920x1200 4xAA/16xAF – Very High settings)
Up to 5% in Call of Duty: Modern Warfare 2 (1920x1200 4xAA/16xAF)
Up to 4% in Crysis: Warhead (1920x1200 4xAA/16xAF – Enthusiast setting)
Up to 24% in Enemy Territory: Quake Wars (1920x1200 no AA/AF)
Up to 9% in Far Cry 2 (2560x1600 8xAA/16xAF)
Up to 25% in Just Cause 2 (2560x1600 no AA/AF - Concrete Jungle)
Up to 7% in Metro 2033 (1920x1200 no AA/16xAF – Tessellation on)
Up to 40% in Metro 2033 with SLI ((1920x1200 4xAA/16xAF – Tessellation on)
Up to 8% in S.T.A.L.K.E.R.: Call of Pripyat (1920x1200 no AA/AF – Day)
Up to 110% in Stone Giant with SLI (2650x1600 – Tessellation on, DoF on)
Up to 6% in The Chronicles of Riddick: Dark Athena (2560x1600 no AA/AF)
Up to 9% in Unigine: Tropics (2560x1600 no AA/AF – OpenGL)
Up to 5% in 3DMark Vantage (Performance and Extreme Presets)
Up to 19% with Transparency AA (1920x1200 4xTrSS – measured in Crysis)
Upgrades PhysX System Software to version 9.10.0223.
Adds support for OpenGL 4.0 for GeForce GTX 400 Series GPUs.
Adds support for CUDA Toolkit 3.1 which includes significant performance increases for double precision math operations. See CUDA Zone for more details.
Adds support for new extreme Antialiasing modes for 3-way SLI PCs, including up to SLI48x AA for GeForce 200 series GPUs and up to SLI96x AA for GeForce GTX 400 series GPUs.
Adds support for a new ‘Quality’ mode for NVIDIA’s Ambient Occlusion control panel feature.
Adds a new NVIDIA Control Panel setup page for SLI and PhysX for ultimate control over multi-gpu configurations.
Adds a new NVIDIA Control Panel feature for ultimate control over CUDA GPUs, allowing the user to effectively choose which GPU will power each CUDA application.
3D Vision customers can download the v257.21 3D Vision drivers here.
Includes numerous bug fixes. Refer to the release notes on the documentation tab for information about the key bug fixes in this release.
Users without US English operating systems can select their language and download the International driver here.
Additional Information:
Installs HD Audio driver version 1.0.9.1 (for supported GPUs).
Supports the new GPU-accelerated features in Adobe CS5.
Supports GPU-acceleration for smoother online HD videos with Adobe Flash 10.1. Learn more here.
Supports the new version of MotionDSP's video enhancement software, vReveal, which adds support for HD output. NVIDIA customers can download a free version of vReveal that supports up to SD output here.
Supports DirectCompute with Windows 7 and GeForce 8-series and later GPUs.
Supports OpenCL 1.0 (Open Computing Language) for all GeForce 8-series and later GPUs.
Supports OpenGL 3.3 for GeForce 8-series and later GPUs.
Supports single GPU and NVIDIA SLI technology on DirectX 9, DirectX 10, DirectX 11, and OpenGL, including 3-way SLI, Quad SLI, and SLI support on SLI-certified Intel X58-based motherboards.
Supports GPU overclocking and temperature monitoring by installing NVIDIA System Tools software.
If you have installed it, post and let us know your results... like WEI Aereo and 3D scores.
Thanks.

New NVIDIA GeForce website.

I anticipate that this new NVIDIA website will prove useful for Adobe PE users who run the fine NVIDIA GeForce graphics adapters in their computers for video editing. I have found NVIDIA to be one of the more cusutomer oriented tech companies out there in recent years, and they make some pretty darn good graphics cards.
http://www.geforce.com/#/

I'm running a GeForce GTX-260 in my newish HP Intel quad-core i7 with 12 GB RAM, and while NVIDIA is providine fairly steady driver updates for this card series, I am still having crashes with PE9 and cannot determine it it's the graphics card or something in the PE coding or Win 7 x64 OS that is causing my frustration. I disabled all the 3-D capabilities on the card and that seemed to perhaps help a little, and have already gone to fully turning off my Norton Internet Security Suite and LAN network, disabling Win 7 x64 screen saver and as many of the Services running in the background that Black Viper suggested I could safely shut down, as well as most of the other things suggested on this Forum but I still get unexplained crashes with the very large 3 GB+ HD video files I routinely process and render -- maybe I should consider a 400 series NVIDIA GTX graphics card but I always end up chocking on the cost of the dang things. Anyone else here having any better luck with other NVIDIA cards and PE9?

Is it possible to put the new nVidia GTX 480 in the Mac Pro

I'm planning on creating the ultimate gaming machine, but also want the best operating system. So I have decided that my next computer will be the Mac Pro and will have the new nVidia GTX 480 (if it works). The Windows partition would be used for heavy gaming with DX 11 and PhysX technology. While on the OSX partition I could use the greatest operating system, to do general things like Movie Making, Picture Editing, Web Surfing, Emailing etc.
So all in all, is it possible to install a GTX 480 on OSX? I know it'll work with the windows partition, but not sure about OSX. I'm also unsure about the hardware side of things, but that's why I'm asking!
Any help would be greatly appreciated.
Thanks again,
Mike

If you don't need dual processor, PC with 980X Gulftown makes sense.
Forget over clocking a Mac, but if you need dual processor, the Mac Pro makes sense but expect to pay. Otherwise, take a look at
EVGA Classified SR-2 (Super Record 2) 270-WS-W555-A1
http://www.evga.com/products/prodlist.asp?switch=5
Apple has not had good Nvidia drivers. And right now there are two 6-pin, and you need 6 + 8 and stick with Windows 7 and ability to do SLI. I laugh when people talk about "windoz" (rude) being somehow less or 'inferior' having seen the best - and worst - of both (never got caught up in 95/98/NT/XP so spoiled by only knowing Vista/7). I still think 10.6 hasn't quite caught up to 7 in areas that really matter, like threading, multicore, efficient use of memory.
Forget using more than one, Apple likes graphic cards that are low power, low end, and only supporting one high end card.
The GTX 480 @ $499, and if Apple offered it, it would be $549 or more (Apple 'tax' for smaller market and having to do their own drivers). And it would be much later before optimized drivers (maybe next year this time at best).
While you can go water and add custom fans and cooling, the Mac is much more of a "closed" box in many ways beyond RAM and hard drives and +very limited+ selection of graphics.
That really is my honest assessment.
The place where Mac Pro is easier, you can install 32-64GB RAM without trouble and not have to worry about compatibility or PSU issues. I'm always surprised by all the memory testing and supported and problems PC owners go through (I don't think Cruical Ballistix gets enough credit).
DX11 will still take time. Adobe showed how GPGPU/CUDA could benefit, but Apple and Adobe apps have always tended to favor ATI which is just beginning to get into OpenCL technology ... and the 5000 series may find Nvidia Fermi, while it took longer, runs hot and power requirement, could be better poised down the road too.
A single socket Mac Pro 3.3GHz or even stock (same as 920) will do the job you want.
Apple Mac Pro Specials (refurb dept)
http://store.apple.com/us/browse/home/specialdeals/mac/mac_pro
Are a good selection and place to shop. My the time Gulftown + GTX480 and all the rest is out and ready could be more than a few months.

I wish to know whether the new NVidia Quadro K2200 graphic card is compatible with the Mercury Playback Engine. Thanks

Hi. I wish to know whether the new NVidia Quadro K2200 and K4200 are compatible with the Mercury Playback Engine in Adobe Premiere Pro CS6. My old graphic card NVidia Quadro FX580 is not listed and not effective apparently because Mercury Playback Engine is effective as from 1Gb RAM. I use a HP workstation and AVCHD (AVCCAM) and DSLR full HD. Thanks.
Message was edited by: Brittany Mauriss
Deleted private user information (email address)

It is compatible, but why anyone would want such a weak and slow card at a premium price is beyond me. See Tweakers Page - What video card to use? and GeForce GTX980 vs Quadro k4200 (2200) #2.

I use an external hard drive as a Time Machine back up, but I want to use another external hard drive to save movies, photos on it, but it won't give me the option to save anything on the new external hard drive. Nothing is wrong with the external hard.

I use an external hard drive as a Time Machine back up, but I want to use another external hard drive to save movies, photos on it, but it won't give me the option to save anything on the new external hard drive. Nothing is wrong with the external hard.

Hi Clarkett99,
To use an external hard drive for your iTunes library, see the steps in this article -
iTunes: Back up your iTunes library by copying to an external hard drive
http://support.apple.com/kb/HT1751
iPhoto can be used in a similar way, follow the steps in this previous discussion -
how do I save photos and their albums...: Apple Support Communities
https://discussions.apple.com/thread/3744259
Thanks for using Apple Support Communities.
Best,
Brett L

My iMac does not see the new Toshiba external drive in Finder or Disk Utility. How can I get it to see the drive?

My iMac does not see the new Toshiba external drive in Finder or Disk Utility. How can I get it to see the drive?

From the menu bar, select
 ▹ System Preferences ▹ Energy Saver ▹ Power Adapter
and uncheck the box labeled Put the hard disk(s) to sleep when possible, if it's checked.
If the drive has more than one interface (USB, FireWire, Thunderbolt, eSATA), try one of the other interfaces.
Check that the data cable is securely inserted at both ends.
Try a different cable.
If you're connecting the drive through a hub, connect it directly to a built-in port on the Mac.
If you're connecting it directly, try a different port.
Disconnect all other devices on the bus, or as many as possible.
Test the drive with another Mac. Test another drive with this Mac.
If the drive is bus-powered, but has an AC adapter, connect the adapter.
Start up in Recovery mode and launch Disk Utility. Is the drive recognized?
Start up in Safe Mode and test.
Reset the NVRAM.
Reset the System Management Controller.
If the drive doesn't work under any of the above conditions, and if another drive does work with the same Mac, then the drive is malfunctioning.

Is the new nvidia geforce driver 340.52 compatible with premiere elements 11?

Similar Messages

Maybe you are looking for