Is the officejet 6600 printer compatible with windows XP

i was wondering if officejet 6600 is compatible with windows xp

Hi,
All supported drivers, including XP, are in the following site:
http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=4323587&lang=en&cc=us...
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

Is HP Smart Web Printing compatible with Windows 7 Ultimate 32 bit and Internet Explorer 8 and 9?

Is HP Smart Web Printing compatible with Windows 7 Ultimate 32 bit and Internet Explorer 8 and 9?

HP Smart Web Printing has been replaced with HP Smart Printing. It does support Windows 7 and IE 6 to IE9. See this page for information.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Is HP Photosmart Premium all-in-one C309n-s printer compatible with Windows 8.1 PRO?

Is HP Photosmart Premium all-in-one C309n-s printer compatible with Windows 8.1 PRO?
Operating System: Windows Version 8.1 PRO
When I upgraded from Windows 7 to Windows 8.1, my HP Photosmart Premium all-in-one C309n-s
stop working. Is this printer not compatible with Windows 8.1 PRO? Is there any update for this?

Hey,
HP Photosmart Premium all-in-one C309n/g printer is compatible for Windows 8.1
Please uninstall your printer's old software then install new one for windows 8.1.
HP Photosmart Premium All-in-One C309 Series Full Feature Software and Driver :
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-109711-1&cc=us&dlc=en&lc=en...
Kevin_US_CA
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
***Click on "Thumbs up" button to the left side of my post to say thanks!***

MF imageclass 4350 (black &white laser printer) compatible with WINDOWS 8.1?

MF imageclass 4350 (black &white laser printer) compatible with WINDOWS 8.1? WINDOWS 8.1 recognizes I have printer attached, but it says flatly "No driver!" I have run all the drivers from CANON and then attached the printer. But, still it doesn't work! Nothing from CANON sez" SETUP...........

Hi mybrojer.
I will be glad to assist you.
The file that you download from the Canon website is .ZIP file. When you select [RUN], it unpacks the setup folder. Please disconnect the printer from the computer and follow the instructions below to install the printer:
Open your [Downloads] folder.
You will see two icons with the name: MF4350_MFDrivers_W64_us_EN.exe. Double-click on the yellow folder icon with this name.
In the folder you will see two listings for [Setup]. Double-click on the [Setup] that has the type as [Application].
The "MF Drivers Setup Wizard" will open. Proceed through the steps and restart the computer.
After restarting the computer, connect the USB cable and allow the installation to complete.
Print a document.
I hope that this information is helpful to you. Should the error persist, or your need further assistance, please contact us at 1-800-OK-CANON (1-800-652-2666).
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Printer compatible with Windows 2000 and Windows 8 operating system?

My office needs to access a terminal server hosted offsite. The terminal server uses Windows 2000. My laptop is Windows 8. Since I upgraded my laptop I am no longer able to print. Do they make a computer that is compatible with both versions of Windows? Is there a fix? I should also mention, I purchased a new HP and it wouldn't work either. augh!

Windows 2000 has been successfully tested with the AT interface card. The file: "Win2000Issues.rtf" (located in the "nifbus" directory) illustrates how to install the AT-FBUS interface card under the Windows 2000 platform. However, the PCMCIA-FBUS card is not supported at this time. In order to use the software under Windows 2000 the "MFC42.dll" file must be in the same folder as the Configurator, otherwise display problems may be experienced.
Windows ME has also been tested with both the AT and PCMCIA interface boards and appears to work well. Additionally, the Configurator software has proven to be stable under ME.

Officejet 4620, not compatible with windows version installing driver 64bit

Hi (October 1, 2014, 9:15 am PST)
When I run OJ4620_Basci64_1315.exe I get the following error msg:
The version of this file is not compatible with the version of Windows you're running.
Check your computer's system information to see whether you need an x86(32-bit) or
x64(64-bit) version of the program and then contact the software publisher.
My system is
Lenovo WIN 7 Premium
64-bit Operating system
Please advise if you have any idea how I can get the driver installed.
Thank you
Geoff

Hello there! Welcome to the forums Geoff aka @gml00 ,
I would suggest trying the driver I have linked you to below for installing your Officejet 4620 on Windows 7.
HP Officejet Full Feature Software and Driver
That driver should work! Let me know how it goes
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Officejet G85xi printer errors with Windows office 8

I recently purchased a new PC with Windows 8. I downloaded the most current drivers for my Officejet G85xi. Each time I try to print I get one or two good pages and then the printer stops and an error pops up in the control menu.

I used the G85xi without issues (other than paper supply out) using Window XP on older PC. The printer has not worked properly since it has been connected to HP Envy 700-074 running Windows 8.1. When I am lucky I get 2 full pages of print before "print error" appears. I have tried Printer Doctor, deleting the printer and re-adding it, set higher priority, checking USB 2.0 port connetion, etc. It usually will finish a text document not much more than a single page, but PDF documents are very limited. I have spent hours trying to print one 9-page PDF document. Should I ditch what was a wonderful printer? Should I ditch a new HP PC with Windows 8.1? Even if I buy a new printer, can I trust it will not stop printing on page 2 or 3 in the middle of the page?

Is Photosmart A532 compact printer compatible with windows 8?

I recently purchased a new computer that came with window 8 OS and I am unable to install my HP photosmart A532 compact printer. I have visited the HP Support site and downloaded the driver that matched my computer settings, but when I run the .exe file I get a pop-up message that says download the latest driver. When I click on it, it sends me back to the HP Support site driver page where I originally installed the driver -- an endless loop. I have downloaded other versions of the driver just to see if it would work and it doesn't. I have also downloaded the doctor software to help resolved the issue and it doesn't detect my printer (I have checked that all cables are connected). My only deduction is that even though HP says it has windows 8 drivers, it really doesn't.
Any help would be greatly appreciated.

Hello wolfgrimm
Welcome to the forums!
First off you do want to start off by uninstalling the any printer software that has been installed. Please check Program and Features, for anything listed for the printer, right click and uninstall. After this with the USB cable still plugged in, you will need to remove the entries from Device Manager. I have included the steps below for you.
Go to device manager.
1. Open up the Universal serial bus controllers list
2. Right click on USB printing support, and click Uninstall
3. Right click on each USB Composite Device, and select Properties
4. Click on the Details tab
5. Change the Property to Hardware Ids
6. Look for any composite device the has a VID_03
7. For the ones that have a VID_03, right click on the composite device, and uninstall
8. Unplug the USB Cable
After this you will need to try install the software again. I have included the link 'HP Photosmart Full Feature Software and Drivers'. Please download and run the installation software. Only plug the USB cable in, when the installation software informs you to.
Please let me know if you are able to successfully install the software, thank you.
I worked on behalf of HP

Is there a way around the cloud not being compatible with windows xp?

I have been using a blackberry bold but am excited to be purchasing the iphone 4s. My idea was to use 1 phone for both personal and business use. I have been synching the blackberry with outlook (non enterprise). I am a solo attorney and have one office computer not on a server. I was planning on synching business stuff (calendar, contacts) with outlook in the office on my windows xp computer and synch my media from a family shared library (via my playlist) on the cloud.
Do you have any suggestions as to how I can synch my contacts, calendar, etc to all of my i devices (incl. ipad 2 and itouch as well as my iphone ) without using hosted outlook exchange. (Exchange is not compatible with other office software).

The dll's and exe's for Photo stream are located here: C:\Program Files\Common Files\Apple\Internet Services
If you try and run ApplePhotoStreams.exe or ApplePhotoStreamsDownloader.exe you get an error saying "The procedure entry point SHGetKnownFolder path could not be located in the dll SHELL32.dll." It looks like this function call is not supported for XP:
http://cboard.cprogramming.com/windows-programming/101380-shgetknownfolderpath-p roblem.html
Frustrating...Not sure there is a workaround, would be nice if you could drop in SHELL32.dll in the Windows folder that supported this function call.

Printer compatible with Windows 98

I have a computerized embroidery business operating on Windows 98 and cannot upgrade operating systems with my embroidery program, unless I start my entire business over again; not willing to invest the time and money to do so; love it the way that it is, but my printer has issues. I get an error message that says "The print cartridge cradle cannot move." I cannot see anything that would obstruct the movement. If I fool with it long enough, I can get it to print one page and then the same message appears. Suggestions or ideas for what I can do? If the problem cannot be rectified, is there a printer that I can get that will work with the Windows 98 system I have?

Hey @EISUE,
Welcome to the HP Support Forums!
I understand that you are getting the message 'print cartridge cradle cannot move' when printing from your Windows 98 computer to your HP Deskjet 932c Printer. I would like to assist you today with resolving this issue. Now I see that you have already checked inside the printer for any obstructions that could be causing this error, to no avail. At this point I am going to run you through some additional carriage troubleshooting steps.
To start, can I please have you click here. Once the website opens, please follow Solution two, Solution three, Solution four, Solution five, and Solution six. This includes any sub-steps under the listed Solutions.
The error that you're encountering is a hardware issue. It is not related to your Windows 98 Operating System. Therefore, the troubleshooting steps that I am having you complete are all hardware based.
Because Windows 98 is an obsolete Operating System, should this Deskjet be defective there are no printers that are supported on Windows 98. The earliest Operating System that currently has print drivers is Windows XP.
Please respond to this post with the result of your troubleshooting. Good luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Is the 4th generation shuffle compatible with windows 7 64bit?

I've had the Ipod 4th gen for awhile and my computer crashed it had windows xp and my new computer has windows 7 64bit. I plug in my ipod thinking it might work after downloading itunes an the ipod doesn't come up on Itunes and says error 28 when I check devices in the computer.
I don't remember which version of Itunes I had on the crashed xp computer any suggestions?

Hmmm....okay, plug it in, and when it displays that yellow triangle message, open a utility called "device manager" (just search for it in the start menu if you cannot find it)...then in device manager, try find the device that is your iPod in the list of devices, and then click uninstall...then when it uninstalls, unplug your iPod and put it back in, and it should start your installation from scratch. :) let me know if it works :)

I am trying to apply for a job online. The site is not compatible with windows 9. They told me to download firefox. I do not want firefox as my default brower. How can I download it and not have it my default browser?

I am not sure what you need typed here. The details are in my question.

When Firefox asks whether you want to make it your default browser, say No. If it does anyway, the next time you start IE, IE will re-assert itself as the default browser.

Is the airport extreme compatible with windows 7 professional???

Desperately trying to figure out if the airport extreme is compatible with windows 7 professional..

Hi - the answer is yes - it is compatible - most of the computers in our office use Windows 7 Professional and we have 10 Extremes in the network.

Is hp deskjet 940c compatible with windows 7

is hp deskjet 940c printer compatible with windows 7 ? and can adaptor be used from 25 pin printer connection to usb computer connection ?
This question was solved.
View Solution.

I have an HP 940C working successfully on a Windows 7 64 bit OS computer. I am using an adapter to go from the 25 pin connector on the printer to USB on the computer. However, the 940C does have a (somewhat hidden) USB connection which should work as well.

Old JVC Video camera, driver only compatible with windows.

I have an old JVC camera, i would like to transfer the video which is on mini DV cassette via usb to my macbook pro however the device is not recognised and the driver is only compatible with windows.

I have an old JVC camera, i would like to transfer the video which is on mini DV cassette
It would help if you give us the exact model JVC camcorder you have.
That said, nearly all miniDV camcorders (including JVC miniDV cams) transfer video via Firewire (aka iLink or IEEE 1394), not USB. And no drivers are required, at least not on a Mac. If you have a more recent Mac that has a Thunderbolt port (no Firewire port), you can use an Apple Thunderbolt-Firewire adapter to connect your camcorder to your Mac (although you may also need a 4-pin to 9-pin FW cable).
Also, on miniDV camcorders that have both Firewire and USB connections, the USB connection is almost exclusively reserved for transferring still photos from the memory card in the camcorder, not video from the miniDV cassettes.

Is the officejet 6600 printer compatible with windows XP

Similar Messages

Maybe you are looking for