Is the only way to allow Acro Reader commenting in a PDF to do it through Acro Pro?

I have Standard and can't see a way to do it.
Do I need Pro for this? Or are there any other (legal) ways to do it?
Thanks in advance.

Yes, Acrobat Pro is required. Here's the matrix of what each version is capable of.

Similar Messages

  • I no longer have access to system folders that allow me to remove old or incorrect PAGES templates. Need to find out how to do that. The only way I can do it now is to blank the template and replace the bad template with a blank.

    I no longer have access to system folders that allow me to remove old or incorrect PAGES templates. Need to find out how to do that. The only way I can do it now is to blank the template and replace the unwanted template with a blank. It was previously possible to go to MY TEMPLATES and remove the unwanted templates. I don't if this issue is before or since installation of 10.8 (a nightmare in my case, which led to significant failure issues).  And because I haven't tried to remove templates since finally managing to install 10.8 (now at 10.8.4), I don't know if this is typical of the newer OS or a problem. I've been a Mac user for more than 25 years, but I think I'm nearing the end of the road. By the way, I've never needed to do this before because the manuals always offered an answer... they don't seem to do that anymore. In any case, I don't know how this works... I'd prefer an email reply if that's possible. But that would probably be too easy, and I don't know how to get a reply.

    Thanks, I appreciate the help.  I think this is one of the problems Apple is creating by changing the OS so often. I had fomer colleagues at [a major aerospace contractor] who told me that so many original files were ultimately lost because of the deadly change in the "Save As" operation that they are now afraid of every OS update. Apple has badly damaged their support base with that very prominent company (they won't update now until they've fully examined and understand changes in the pre-conditioned nature of OS computer functions), and they are a whole lot less enthaled with Mac-related equipment/software. Can't blame them, I too used orginal files that way (as easy-to-use templates), and lost some important files before I realized what was happening (to late to revert). Companies should not have to retrain employees each time an OS gets an update, it's can be very expensive several different ways. They learned a painful lesson with that one. And because I'm now retired and don't use multiple devices, I need iCloud like I need a hole in the head... but I'm told there's no way to keep Apple out of my computer. Fortunately, because of major problems when initially installing Mountain Lion, one hold-over of the hardware/software damage I experienced was that iCloud can no longer access my computer even though everything else is working fine again. That was the only "good luck" I had as a result of that expensive nightmare.

  • When I use safari I keep getting a small coloured circular icon which in turn does not allow me to navigate at all.  the only way I can get rid of it is to shut down and reboot.  Can anyone help?

    When I use safari I keep getting a small coloured circular icon which in turn does not allow me to navigate at all.  the only way I can get rid of it is to shut down and reboot.  Can anyone help?

    Start here.

  • After reading and resetting everything with Keyboard I still get blank white screen. The only way I can boot to Mavericks is unplug power cord, push and hold power button while plugging power cord in. Fans at full speed.

    After reading and resetting everything with Keyboard I still get blank white screen on 2nd? page of boot. The only way I can boot to Mavericks is unplug power cord, push and hold power button while plugging power cord in. Fans run at full speed, machine boots then runs normal except the dvdrw will not . The mid 2011 IMAC had the same problem with LION. I changed hard drives, formatted, and installed a clean install of latest os x mavericks. Any help would be greatly appreciated.
    EtreCheck version: 1.9.15 (52)
    Report generated August 30, 2014 at 6:56:41 PM EDT
    Hardware Information: ?
        iMac (21.5-inch, Mid 2011) (Verified)
        iMac - model: iMac12,1
        1 2.5 GHz Intel Core i5 CPU: 4 cores
        4 GB RAM
    Video Information: ?
        AMD Radeon HD 6750M - VRAM: 512 MB
            iMac 1920 x 1080
    System Software: ?
        OS X 10.9.4 (13E28) - Uptime: 0 days 0:16:53
    Disk Information: ?
        ST3120026AS disk0 : (120.03 GB)
        S.M.A.R.T. Status: Verified
            EFI (disk0s1) <not mounted>: 209.7 MB
            Untitled (disk0s2) / [Startup]: 119.17 GB (87.12 GB free)
            Recovery HD (disk0s3) <not mounted>: 650 MB
        HL-DT-STDVDRW  GA32N 
    USB Information: ?
        Apple Inc. FaceTime HD Camera (Built-in)
        CHICONY USB NetVista Full Width Keyboard
        Apple Inc. BRCM2046 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Computer, Inc. IR Receiver
        Apple Internal Memory Card Reader
    Thunderbolt Information: ?
        Apple Inc. thunderbolt_bus
    Gatekeeper: ?
        Anywhere
    Kernel Extensions: ?
        [loaded]    com.nvidia.CUDA (1.1.0) Support
        [loaded]    com.sophos.kext.sav (9.0.61 - SDK 10.7) Support
        [loaded]    com.sophos.nke.swi (9.0.53 - SDK 10.8) Support
    Startup Items: ?
        CUDA: Path: /System/Library/StartupItems/CUDA
        FanControlDaemon: Path: /Library/StartupItems/FanControlDaemon
    Launch Daemons: ?
        [loaded]    com.adobe.fpsaud.plist Support
        [running]    com.arcsoft.eservutil.plist Support
        [running]    com.bjango.istatmenusdaemon.plist Support
        [loaded]    com.oracle.java.Helper-Tool.plist Support
        [running]    com.sophos.autoupdate.plist Support
        [running]    com.sophos.configuration.plist Support
        [running]    com.sophos.intercheck.plist Support
        [running]    com.sophos.notification.plist Support
        [running]    com.sophos.scan.plist Support
        [running]    com.sophos.sxld.plist Support
        [running]    com.sophos.webd.plist Support
    Launch Agents: ?
        [running]    com.arcsoft.esinter.plist Support
        [running]    com.bjango.istatmenusagent.plist Support
        [loaded]    com.nvidia.CUDASoftwareUpdate.plist Support
        [loaded]    com.oracle.java.Java-Updater.plist Support
        [running]    com.sophos.uiserver.plist Support
    User Login Items: ?
        Macs Fan Control
        Firefox
    Internet Plug-ins: ?
        FlashPlayer-10.6: Version: 14.0.0.176 - SDK 10.6 Support
        Flash Player: Version: 14.0.0.176 - SDK 10.6 Support
        QuickTime Plugin: Version: 7.7.3
        JavaAppletPlugin: Version: Java 7 Update 67 Check version
        Default Browser: Version: 537 - SDK 10.9
    Audio Plug-ins: ?
        BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
        AirPlay: Version: 2.0 - SDK 10.9
        AppleAVBAudio: Version: 203.2 - SDK 10.9
        iSightAudio: Version: 7.7.3 - SDK 10.9
    iTunes Plug-ins: ?
        Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
    3rd Party Preference Panes: ?
        CUDA Preferences  Support
        Fan Control  Support
        Flash Player  Support
        Java  Support
    Time Machine: ?
        Time Machine not configured!
    Top Processes by CPU: ?
             1%    WindowServer
             1%    fontd
             0%    firefox
             0%    SystemUIServer
             0%    SophosWebIntelligence
    Top Processes by Memory: ?
        229 MB    firefox
        156 MB    SophosScanD
        152 MB    InterCheck
        131 MB    com.apple.IconServicesAgent
        115 MB    SophosAntiVirus
    Virtual Memory Information: ?
        424 MB    Free RAM
        1.53 GB    Active RAM
        1.37 GB    Inactive RAM
        699 MB    Wired RAM
        1.26 GB    Page-ins
        0 B    Page-outs

    I'd start by getting rid of the following software responsible for these extensions.
    Kernel Extensions: ?
        [loaded]    com.nvidia.CUDA (1.1.0) Support
        [loaded]    com.sophos.kext.sav (9.0.61 - SDK 10.7) Support
        [loaded]    com.sophos.nke.swi (9.0.53 - SDK 10.8) Support
    Startup Items: ?
        CUDA: Path: /System/Library/StartupItems/CUDA
        FanControlDaemon: Path: /Library/StartupItems/FanControlDaemon
    Use the uninstaller provided with the Sophos software. You can uninstall CUDA via the preference pane. Be sure you remove the com.nvidia.CUDA extension which is located in the /System/Library/Extensions/ folder. Not sure if Fan Control has an uninstaller so you will have to do it manually:
    Uninstalling Software: The Basics
    Most OS X applications are completely self-contained "packages" that can be uninstalled by simply dragging the application to the Trash.  Applications may create preference files that are stored in the /Home/Library/Preferences/ folder.  Although they do nothing once you delete the associated application, they do take up some disk space.  If you want you can look for them in the above location and delete them, too.
    Some applications may install an uninstaller program that can be used to remove the application.  In some cases the uninstaller may be part of the application's installer, and is invoked by clicking on a Customize button that will appear during the install process.
    Some applications may install components in the /Home/Library/Applications Support/ folder.  You can also check there to see if the application has created a folder.  You can also delete the folder that's in the Applications Support folder.  Again, they don't do anything but take up disk space once the application is trashed.
    Some applications may install a startupitem or a Log In item.  Startupitems are usually installed in the /Library/StartupItems/ folder and less often in the /Home/Library/StartupItems/ folder.  Log In Items are set in the Accounts preferences.  Open System Preferences, click on the Accounts icon, then click on the LogIn Items tab.  Locate the item in the list for the application you want to remove and click on the "-" button to delete it from the list.
    Some software use startup daemons or agents that are a new feature of the OS.  Look for them in /Library/LaunchAgents/ and /Library/LaunchDaemons/ or in /Home/Library/LaunchAgents/.
    If an application installs any other files the best way to track them down is to do a Finder search using the application name or the developer name as the search term.  Unfortunately Spotlight will not look in certain folders by default.  You can modify Spotlight's behavior or use a third-party search utility, EasyFind, instead.
    Some applications install a receipt in the /Library/Receipts/ folder.  Usually with the same name as the program or the developer.  The item generally has a ".pkg" extension.  Be sure you also delete this item as some programs use it to determine if it's already installed.
    There are many utilities that can uninstall applications.  Here is a selection:
        1. AppZapper
        2. AppDelete
        3. Automaton
        4. Hazel
        5. AppCleaner
        6. CleanApp
        7. iTrash
        8. Amnesia
        9. Uninstaller
      10. Spring Cleaning
    For more information visit The XLab FAQs and read the FAQ on removing software.
    Be sure to remove your two Login Items. Finally do this:
    Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
    Reinstall Lion, Mountain Lion, or Mavericks
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it is three times faster than wireless.

  • The round button that allows me to get out of an app or to move or delete apps has stopped working.  Once I am in an app the only way to get out of the app is to power off my ipod completely.  Help!

    The round button that allows me to get out of an app or to move or delete an app has stopped working.  Once I am in an app, the only way to get out of it is to power off my ipod completely.  Help!

    Try this previous discussion:
            FIX for iPod Touch Home Button: Apple Support Communities

  • It is unclear the advantage to pre-ordering the new iPhone 5. What I have read is that it will ship on the 21st? If so the only way to get one on the 21st is go stand in line. Please correct me if I am wrong.

    It is unclear the advantage to pre-ordering the new iPhone 5. What I have read is that it will ship on the 21st if you pre-order? If so the only way to get one on the 21st is go stand in line. Please correct me if I am wrong.

    if you don't have time to stand in line or don't want to risk getting there too late and leaving empty handed from the apple store preordering will guarantee you one but possibly in a slightly longer timeframe

  • Since I have the newest version of itunes, I can't back up like normally. The only way is to considilate files and then put them on an external drive which I don't have. Are there any other options? If I can't back up to a disc like I used to, can I inste

    Since I have the newest version of itunes, I can't back up like normally. The only way is to considilate files and then put them on an external drive which I don't have. Are there any other options? If I can't back up to a disc like I used to, can I instead just keep everything on my ipod and then if I have to get a new computer or something just download all my songs from the ipod to my new computer's itunes? Will that work? Will I still be able to keep all my songs that way?

    I'm going to assume the consolidating files does not work due to hard drive space limitations.
    Since you're moving to Windows 7, have you tried using the Windows files and settings transfer utility?  That will move everything for you to the same location on the new computer, it also allows some control over what actually gets moved.
    Alternatively, if you know the location of all of the media, it can be manually moved by copying it from the old computer to the new computer in the same location.
    Also, using the Apple article on moving the library, take a slight twist on what it says.  Move the iTunes library to the external drive, update the settings in iTunes to reflect the library being on the external drive, then consolodate it.
    The options are endless for moving the library... it simply takes a little effort to make it happen and possibly a twist on existing "standard" methods depending on your unique situation.

  • Why does FireFox freeze and the only way to unfreeze it is to open the task manager and close the plugin-container.exe file??? It has been happening more and more often and it is getting VERY AGGRAVATING!!!!!

    When Firefox does freeze (not responding appears in parentheses in the page tab) I am not able to access any of the webpages (the entire webpage is hidden behind a vaguely white transparent foreground) and more often than not any files I might be downloading are stopped before the entire file has been transferred - which means that I have to start those downloads from the beginning AGAIN. This has been happening for quite some time and I AM SICK AND TIRED OF IT HAPPENING!!
    If it continues to happen for much longer I will swear off FireFox FOREVER!!!!! Either a program works or it does not work and lately Firefox has not worked worth a damn...........
    The ONLY way to force Firefox to allow me to access it is for me to end the plugin-container.exe file process using Task Manager. Clearing there is a SERIOUS problem here that has not been resolved - why not???

    The pluging container opens up unnecessary copies as the cookies/history are cleared, this is a known issue, it might be what you are seeing, and it is hoped to be fixed in some future release of firerox.
    There are some hangs affecting some users, with symptoms being high cpu usage, occurring as bookmark changes or syncing is in progress, there is a work around for that.
    Firefox hanging as you close it see:
    *[[firefox hangs]]
    * [[firefox is already running but is not responding]]

  • Hide field using a different configuration, is this the only way?.

    I know that I can control which configuration is used by inserting code into the do_config_determination method, but is that really the only way?. I don't want to have to even more copies of the configuation showing or not showing this particular field. Surely there must be a way of hiding the field within this method without changing the configuation set being used?.
    I just can't believe that there is no way around this.
    Now I know that using standard configuration can take care of this, but what if you had a screen with lets say 30 fields or which 5 are dynamic, in other words are either diplayed or to be hidden. The combination of on and off states for these 5 fields being either displayed or hidden would mean that you would gradually build a huge number of screen configurations. Hence the need to hide via coding. Does that seem logical?
    Jas.
    Edited by: Jason Stratham on Sep 8, 2009 2:08 PM

    One of the suggested solutions was to create one line views and display them beneath the main view. We can the determine (via code) whether these views are displayed via view sets. This in effect allows us to have multiple fields that can be either displayed or hidden depending on some kind of routine/logic.
    Jason.

  • I have installed mackeeper on my iMac and ia show 1945 issues, is subscibing to mackeeper the only way to get rid of these issues

    I have installed Mackeeper on my iMac an it shows 1945 issues, and they have used 700+ GB of hard drive space, is subscribing to Mackeeper the only way to get rid of these issues?

    Those are not real issues. I tested the MacKeeper trial on a freshly-installed OS X 10.8.2 system, with absolutely nothing added to it, and it identified almost as many "junk files." They're not really junk, you're being scammed to convince you to pay the money to buy the program so you can "fix" the "problem." There have been many reports that allowing MacKeeper to "clean up" your system can actually destroy it, requiring reinstallation.
    MacKeeper is to be avoided at all cost. For more information, see Beware MacKeeper. Remove it according to the instructions here:
    http://applehelpwriter.com/2011/09/21/how-to-uninstall-mackeeper-malware/

  • At times I will close my firefox browser When I go back to open my browser I get a message stating that firefox is running The only way I can get my browser open is to restart my computer Why

    At times I will close my firefox browser When I go back to open my browser I get a message stating that firefox is running The only way I can get my browser open is to restart my computer Why

    Sounds like Firefox is "hanging at exit". That problem is frequently caused by an Extension or a Plugin. Read all of the following articles.<br /><br />
    NOTE: Establish a habit of exiting/closing Firefox with Firefox button > Exit or File > Exit to allow an orderly shutdown of Firefox and closing of all of the files that Firefox has open.
    #Stop the Firefox process:
    #*[http://kb.mozillazine.org/Kill_application Mozillazine - Kill application]
    #*Windows 7 users click [http://www.techrepublic.com/blog/window-on-windows/reap-the-benefits-of-windows-7s-task-manager/2576 here]
    #*Mac users: http://techheavy.com/2011/02/the-mac-task-manager/
    #Why Firefox may hang:
    #*[http://support.mozilla.org/en-US/kb/Firefox+hangs Firefox hangs] (see Hang at exit)
    #*[http://kb.mozillazine.org/Firefox_hangs Firefox hangs (Mozillazine)] (see Hang at exit and Closing Firefox properly)
    #*[https://support.mozilla.org/en-US/kb/Firefox+is+already+running+but+is+not+responding Firefox is already running but is not responding]
    #Use Firefox Safe Mode to find a problem with an Extension or Plugin:
    #*Don't check anything when entering Safe Mode, just continue
    #*If the problem does not occur in Safe Mode it is probably an Extension or Plugin causing the problem
    #*See:
    #**[[Safe Mode]] and [http://kb.mozillazine.org/Safe_Mode Safe Mode (Mozillazine)]
    #**[http://support.mozilla.org/en-US/kb/Troubleshooting+extensions+and+themes Troubleshooting extensions and themes]
    #**[http://support.mozilla.org/en-US/kb/Troubleshooting+plugins Troubleshooting plugins]
    #**[http://support.mozilla.org/en-US/kb/Basic+Troubleshooting Basic Troubleshooting]
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
    Not related to your question, but...
    You may need to update some plug-ins. Check your plug-ins and update as necessary:
    *Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
    *'''''Adobe Shockwave for Director Netscape plug-in''''': [https://support.mozilla.org/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
    *Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.org/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
    *Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.org/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
    *'''''Next Generation Java Plug-in for Mozilla browsers''''': [https://support.mozilla.org/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

  • Since updating an iphone5 to ios8.3, it is no longer recognized by my pc. An Apple tech suggested that I install itunes as the only way to assure that I have the latest driver. Any way to do this without installing itunes?

    Since updating an iphone 5 to ios 8.3, it is no longer recognized by my Windows 7 pc. An Apple tech suggested that I install itunes as the only way to assure that I have the latest driver. Any way to do this without installing itunes?

    Read this
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive

  • How do I stop Firefox from creating untitled web pages when I try to send email from a web page. The only way I have found is to turn the computor off and then reboot. I don't have this problem when using Internet Explorer

    Every time I click on a web site that has an email option the browser starts making untitled web pages and never stops unless I turn the computer off. It is very frustrating to not be able to use an email option when offered by a web site. The only way I can send email messages on the Firefox browser is to go into my hotmail acct. and copy and paste the addresses. I don't have this problem when I use the Internet Explorer browser.

    See [[Firefox keeps opening many tabs or windows]]

  • I am unable to open new tabs, in any way I attempt to do so. I have checked the settings and they are fine, so it's not those. The only way I can open a new tab is to right click on a link and instruct it to open in a new tab.

    Any way I attempt to open new tabs, be it clicking on the new tab button or using the short-cut Ctrl-t, I am unable to open any new tabs on my browser window.
    The only way I have found that I can open a new tab is to right-click on a link and instruct that link to open in a new window.

    Try disabling the Ask Toolbar extension.

  • Whenever I reply to an e-mail the window comes up but without the paper airplane in the top left corner.  The only way to send the reply is to close it and save as a draft.  Then I can pull it up from Drafts and it has the airplane on it.

    Whenever I reply to an e-mail the window comes up but without the paper airplane in the top left corner.  The only way to send the reply is to close it and save as a draft.  Then I can pull it up from Drafts and it has the airplane on it.

    Launch Mail.
    Click "New Message" in the Toolbar.
    When the new message window opens up, click "View" menu in the menu bar.
    Select "Show Toolbar" from the dropdown.
    or
    Select "Customize Toolbar from the dropdown.
    When the Customize Toolbar sheet drops down, drag  "Send" button
    or  drag "default set" into the toolbar.
    Click "Done".

Maybe you are looking for

  • Missing payload in SXMB_MONI

    Hi. Have an interface with one message in to XI(JDBC). I split this message. One to SAP R3 (idoc) and one out to an server through an fileadapter. In SXMB_MONI I can see the payload (content)for the idoc-message, but there is not an payload for the o

  • Problem with payment block code in MIRO

    Hi experts, I've a problem during invoice verification, the system doesn't set the payment block code R -Invoice verification but another payment block code and in this way the transaction MRBR doesn't show the invoice blocked. Is there in customizin

  • Clearing the cache on version 6.5.2

    I was told I should clear my caches now and then...trouble is I can't find out how to do this. Yasu works for the system and browser ones, but how do I clear Quicktime's? I've clicked on everything there was available to click on in Quicktime Prefere

  • RoboHelp HTML Accessibility

    I'm using RoboHelp 8 to generate HTML (.chm) output. My company has a mandate to create Section 508 compliant (accessible) online Help. Can I create an accessible online Help project using HTML (.chm) output or must it be WebHelp output to be Section

  • Put radio button instead of standard button in user desicion workitem

    Dear Exepert, I want to customise my userdesicion workitem,. I want to put radio buttons instead of default button . Please let me know what configuration i need for that., Regards, Gurprit Bhatia