Is the only way to keep a behaviour's setting after finish via a keyframe
Is the only way to keep the final value of a movement behaviour (ie scale, thow etc), once the behaviour ends but the element to which the behaviour was attached hasn't ended, by converting the behaviour to keyframes?
I can see no other way, although I hope there is one, such as a hold frame or something like that?
Thanks in advance.
There's a "End Offset" slider in most behaviors, adjusting that will create a hold value at the end of the behavior. You'll have to extend the behavior's length in the timeline by the same amount as the End Offset to keep the original animation before the hold.
Similar Messages
-
Is MS exchange the only way to keep mail synced across all devices? Can Mac mail do this without exchange? I have iPhone,iPad and new MacBook Pro, and looking for advice please.
As Bob says, any iMap service can do this. GMail can, iCLoud mail can too.
Both of these can be used with Mail on any device. -
why my Iphone 5 goes into search for days and the only way to get it working is to reset it via itunes. i am on EE network
Try a SMC reset:
http://support.apple.com/kb/HT3964
Try a NVRAM/PRAM reset:
http://support.apple.com/kb/HT1379
If no joy, take it back, and take full advantage of your warranty!
You also may want to let Apple know about this as well:
http://www.apple.com/feedback//
I wish you the best -
Moving the playback window is the only way to keep video from stuttering
I have a problem where video stutters every second or two. The playback will freeze, audio continues to play, and then the video will unfreeze to sync with the audio. It always fixes when I reboot the computer, but only for a few days. Then it returns. Simply logging out and back in does not fix the problem.
The biggest clue, it seems, is that the stuttering does not occur if I click on the player window and move the window around. It plays just fine while I'm doing that, but the moment I stop moving the window, even with the mouse button still held down, the problem returns.
It happens with all video players, including Quicktime player and VLC.
It happens in all 5 logins.
It happens with all video file types.
It happens reading from both my internal drives and my external firewire drive.
I have 21 gigs free on my 160 gig HD. Even when I freed up more space it didn't help.
TechTool reports no problems with any subsystem (video, memory, etc.). I tried swapping RAM and even buying new RAM and still the problem occurs.
I tried repairing permissions and checking the drive for errors.
I've spent hours trying to find a solution to this problem. If you have any suggestions please let me know.
(Yes, I posted this problem a while back in a separate topic, but I got nowhere so I thought I'd try a different topic subject)
Thanks for any help.Okay, some of these are not obviously third-party. Should I just remove them all?
Thanks.
/Library/QuickTime has
LAMEEncoder.component
TSCC.component
/Library/Internet Plug-ins has
AdobePDFViewer.plugin
DRM Plugin.bundle
Flash Player.plugin
flashplayer.xpt
JavaPluginCocoa.bundle
NP-PPC-Dir-Shockwave
nsIQTScriptablePlugin.xpt
Quartz Composer.webplugin
QuickTime Plugin.plugin
QuickTime Plugin.webplugin
RealPlayer Plugin
RealPlayer Plugin.xpt
VerifiedDownloadPlugin.plugin
Windows Media Plugin
~/Library/QuickTime is empty -
Is Invisishield the only way to keep ur nano perfect?
I want it to look like a nano, not a mini, and with zcover, its the same size as a mini...
yeh the invisishield looks very good but there are cases that are very thin and light so u just have to look around. i know people might have seen this but this case looks really good. im just not sure if its out yet.
http://www.contourcase.com/
and a little off topic but if u could help it would really.. help. i tried to buy a song in itunes just recently and i can see it right in front of me on the screen but it says, "the item you tried to buy is no longer available" and something like the availabilty changed and might be somewhere else in the store. how can i get it. -
hi ive upgraded my itouch to ios 6.1.3 but it keeps crashing ounce i put my passcode in is there a way i can fix this? one of my friends mentioed downgrading it but the only way isnt supported by apple so i dont feel safe with it so plzz help me.
it has worked fine no problems till i updated it i tried restoring itwith my old backup but it doesnt move the ios back so it just keeps on craching when i try to unlock itTry:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Downgrading the iOS is not supported by Apple -
When I use safari I keep getting a small coloured circular icon which in turn does not allow me to navigate at all. the only way I can get rid of it is to shut down and reboot. Can anyone help?
Start here.
-
I got the new iPad on June 2012 and I wish to keep the long life of the battery as much as I can. I always and only use the cable that comes with the product and never charge it through computer.
Should I:
1) wait till baterry is completely empty, pratectly dead and then charge it?
2) charge it when it reach 5%-10%.
3) turn off the iPad when I charge the battery?
Thank you apple support :)The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
Cheers, Tom -
my forward text message feature on IOS8 keeps disappearing and the only way I know to make it re-appear is by powering off and on my phone. Is there any other way to fix this?
I should also point out that when I connect my iPhone, it DOESN'T appear as a connected drive on the desktop. Not sure how this can be so, since the iPhone also has a drive and also functions as an iPod if I want it to. I must have changed some setting to achieve this non-appearance, but don't remember what I must have done.
What's the secret? -
have a real problem i just can't make a reservation and this is the only way to contact apple . It seams to keep going to the american site .
Apple world-wide support numbers are found at: http://support.apple.com/kb/HE57
If this is regarding your information line that says a stolen iPhone, Apple can do nothing to help you. You must track the iPhone yourself using iCloud and must have turned on Settings > iCloud > Find My Phone before it was stolen. If that was not done, there is no way to track the iPhone.
Report the theft to the police and the cell service provider and ask if they can blacklist the iPhone so it cannot be used. Change all passwords associated with acconts on the iPhone. -
Help
I upgrated my computer to OS X Mountain Lion last night and since then my computer keeps restarting over and over again. The only way I can use it is by being in Safe Mode. Can you please tell me what I need to do so my computer works perfectly again.
Thank youIf you have more than one user account, you must be logged in as an administrator to carry out these instructions.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select the most recent panic log under the heading System Diagnostic Reports on the left. If you don't see that heading, select
View ▹ Show Log List from the menu bar. Post the entire contents of the panic report — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post shutdownStall, spin, or hang reports. -
My iPhone 4 alert volume keeps turning its self down even though the volume is turned up. The only way to correct is to turn the phone off and then back on.
YES! This is really killing me and you're the only one to bring it up in discussions! I constantly have to turn it off and on to get it back to norm, and this other reply about clean wiping in/resetting it is just too much of a pain in the @#*. I don't have the apple warranty, but do have verizon as a carrier with insurance. I wonder if they'll have a clue as to what to do, or just default to the idiocy that is the norm. Good luck to us both. Btw, I have the 4s..
-
When watching a program or film, the video will suddenly fo black, but the audio will keep playing. The only way to get picture back is to turn the tv off then on. Whats going on?
Welcome to the Apple Community.
Check that the HDMI cable is correctly seated at both ends.
Try disconnecting the cable and connecting it again.
Try another HDMI cable.
Make sure your TV supports 720p (Apple TV 2)
Try the Apple TV with another TV -
I downloaded IOS6. The next day my iphone was not connecting to wifi. I reset network connections...put in my password and voila it worked!....But then it dosconnected again..and again...and again....my wifes iphone 4 is not having this problem and she also installed IOS6. The only way I can stay connected to wifi is if i disable my cellular data. What is going on???...Anyone?......
Is it a BT Yahoo account? If so, there have been quite a few threads about Yahoo constantly rejecting passwords, with no clear fix.
That said, I did see someone post that they'd resolved the problem by eliminating any capital letters from the password. After that it stopped asking for passwords and started working, apparently. One or two others tried the 'fix' and seemed to have the same success. At least they haven't come back to say it had gone wrong again. -
Every time I click on a web site that has an email option the browser starts making untitled web pages and never stops unless I turn the computer off. It is very frustrating to not be able to use an email option when offered by a web site. The only way I can send email messages on the Firefox browser is to go into my hotmail acct. and copy and paste the addresses. I don't have this problem when I use the Internet Explorer browser.
See [[Firefox keeps opening many tabs or windows]]
Maybe you are looking for
-
Is it possible to setClob in one prepareCall?
i've searched over dbms_lob package and oracle jdbc articles, but it states that the lob locator should be fetched first in order to setClob. So how can i do that within one prepareCall statement? thanks, A.L.
-
Session level NLS_COMP NLS_SORT not inheriting from instance parameters???
Hi all, I have an Oracle 11g installation with a database setup as follows: NLS_COMP=BINARY, NLS_SORT=BINARY. After playing a bit at the session level with NLS_COMP=LINGUISTIC and NLS_SORT=BINARY_CI, I persisted them at the instance level via ALTER S
-
Data Integration Kit and SAP BI
Hi Guys, Have a quick question. My understanding was we use Data Integration kit in order to integrate Crystal Report and SAP BI. To create an Universe , we dont need Data Integration Kit. Can anyone please confirm? Regards
-
TechTools Plat won't optomize ext FW HD
No matter what I try, TechTools Platinum won't recognize my external FW or USB2 drives for optimization. Click on Tests, then Drives and it's there to test but I can not optimize the drives. Any thoughts? Any better programs to use to optimize the dr
-
I am trying to send emails to groups so that the email addresses are not visible to all the recipients. How can this be done?