Is the optional high-resolution 1680 by 1050 needed for HD TV?

Is the optional high-resolution 1680-by-1050 pixels (vs. the standard 1440-by-900) needed to view HD TV on a 15" MacBook Pro with i5 processor?

No. You can view HDTV at reduced resolution on any MBP display. The 17" models are the only ones that can display 1920 x 1080 HDTV at its full resolution.

Similar Messages

In iMovie, why do I get the msg "high resolution video thumbnails and then it immediately starts with "now" and it's hung up for a long time

In iMovie, why do I get the msg "high resolution video thumbnails" and it automatically goes to Now and the laptop is hung up for a very long time and I have to shut down to get out of it?

Hi,
Welcome to the  Discussions
So we have DSL Modem <-> Base Station <-> Computer connected by Ethernet.
Is the Modem Routing ?
Is the Base Station set to "Share An IP" ?
(i.e are there two DHCP servers on your LAN ?)
Is Internet Sharing On in th G5s System Preferences > Sharing pane ?
In the Base Station is Port Mapping Protocol Enabled if it is doing routing ?
It is in the NAT tab of the Internet Pane.
Is the G5 also doing WiFi to the Base Station ?
Also check the Modem is not Blocking PINGS as this log shows no PING (But I am not sure it even got that far)
7:45 PM Thursday; February 18, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Macbook pro folder with question mark blinking appear whent I turn on, When I press the Option key Grey lock screen appear asking for a password, can anyone help me please?

Macbook pro folder with question mark blinking appear whent I turn on, When I press the Option key Grey lock screen appear asking for a password, can anyone help me please?

Provide the computer's firmware password. If you don't know what it is, contact the person you got the computer from or Apple.
(91589)

Hi! I can't upgrade my iTunes 10.3.1.55 on my Windows XP 2002 SP3 to the latest version of iTunes. Got the message: "A problem has occured with the Windows Installer-package. A program needed for this installation could not be run." What to do?

Hi! I can't upgrade my iTunes 10.3.1.55 on my Windows XP 2002 SP3 to the latest version of iTunes. Got the message: "A problem has occured with the Windows Installer-package. A program needed for this installation could not be run." What to do?

Perhaps let's first try updating your Apple Software Update.
Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time?

I bought a mac air yesterday and i was trying to download maverick but i could not do it, i try to download the old version of numbers because i needed for work, but i could not neither, but now when i check to download numbers is asking for to pay?

i bought a mac air yesterday and i was trying to download maverick but i could not do it, i try to download the old version of numbers because i needed for work, but i could not neither, but now when i check to download numbers is asking for to pay?

You are mixing different issues. I will address Numbers.
Has Numbers ever been installed on this new Mac? Did you have the Mac App Store version of Numbers or did you have the DVD version of Numbers?
You should be able to redownload a previous purchase of the Mac App Store version of Numbers from the Purchases pane after signing into your account.
If you had the DVD version, then you will need to install that from the DVD media.

Where to download the crdb_jdbc.dll file ??? - Needed for Crystal report ..

Hi Friends ,
Where to download the crdb_jdbc.dll file ??? - Needed for Crystal report ..which is missing for me ...
i searched in many sites .. but this only dll file is missing ..
can any one help me out ..

itsdhanasaraa wrote:
Hi Friends ,
Where to download the crdb_jdbc.dll file ??? - Needed for Crystal report ..which is missing for me ...
i searched in many sites .. but this only dll file is missing ..
can any one help me out ..Ask at where ever you bought the software from.
Let me guess, you didn't buy it, did you?

Steps to Transfer mail from Older MBP 10.6.8 to Newer MBP 10.8.5 for NON-tech person I really just need the simplest solution. I have cleaned out old folders on the OMBP, but there are folders I need for work

I really just need the simplest solution. I have cleaned out old folders on the OMBP, but there are folders I need for work.
I am not a technical person. I have gone online and read a gazillion "All Ya Gotta Do...." to the point where my head swims.
I backed up my older MBP onto WD Passport Studio via Time Machine.
I transferred all my files there and put them all onto the newer MBP.
I expected to see Mail but did not.
Someone said just use Migration Assistant, but I dont find that anywhere.
Please dont say iCloud because I dont even know what it is. Sorry, but I just dont use my Mac other than for work, meaning online access for research, and then typing reports of various kinds... and for emailing.
Can I just hook the firewire directly from OMBP to NMBP and copy them that way??
Sorry I am such a dolt, but I really just want easy step by step instructions, thank you.
Would the Genius Bar at my local store be able to help me???
Thank you,

Okey Dokey!
I followed the steps for the Target Disk thing, and was able to transfer everything on my old desktop, in my old pictures file... all the final transfers regarding my documents and photos.
BUT
there were no folders for Mail, and when I went to the only folder I could find that said "Mail" -- which was under "applications" it then told me that I could not transfer old "mail" to new "mail" since they were different versions...
Now THIS makes sense,,, and I was not looking to do that...
but how do I find all my mail folders????
Is there someplace I should be saving them in order to get them???
Do you mind helping me with instructions on how to do this?
Thanks!

DL high resolution SAP-Netweaver-marketing-pictures for printing

Hi,
does someone know where I can download some SAP-"marketing"-pictures in high resolution for printing? Maybe they have a download section for press releases. I was looking for such a section but was not able to find one.
Especially I am looking for this picture:
http://www.cundus.de/img/seiten/produkte/sap/enterprise_portal_01.gif
Thanks a lot.
Regards,
Thomas

The company already told me that they will refund my money so that is not the problem.
The ratio differences is what the person told me initially too, however told me that I could also change the dimensions so that the photos would not be cropped and centered automatically...but that's not what I want to do, as it would leave white space on the sides and top, and I have several that I want to frame.
So what do I do now? I have 100's of pictures and over 90% of them have this problem. I used your software to enhance the photos, crop the photos, etc... but I don't see an area that explains to me what part of the image will be cropped out once they are sent out to print. Nor to I see an area that gives me a rectangular dimension to work from. If I have to crop these pictures to get them to turn out right, I need to get started on this right away.
When I print these on my own printer they seem to print just fine. There are too many to print this way, however.

When closing multiple tabs, is there any way to get back the option of saving those tabs OR NOT for your next session, within the warning dialogue box itself?

For brief period of time, not in FF4, there was the option whereby when I closed multiple tabs, a firefox dialogue box opened warning me that I'm about to close multiple tabs, '''AND ALSO''' asking me if wanted to save those tabs for my next session, or trash them.
The primary issue IS NOT about saving tabs. The primary question here is about getting THE OPTION back to the CLOSING MULTIPLE TABS WARNING DIALOGUE.
The use case here should be obvious. However, since it is clearly not obvious that different people work in a variety of ways, and neither of those methods of working is "wrong" or "right" I will elaborate: Some people, for whatever reason, it doesn't matter why, want to save all their tabs on some occasions, and on other occasions don't.
This preference varies throughout the day. Therefore it is inefficient to constantly go to preferences and change whether or not I want firefox to open all my tabs from my last session. It is more LOGICAL to place an option in the multiple tab warning dialogue as well, for people whose preference constantly changes.
This option was available for a time in most of the Firefox 3 versions. Is there any way to get back this option in Firefox 4?

Firefox 4 saves the previous session automatically, so there is no need for asking if you want to save the current session.
You can use "Firefox > History > Restore Previous Session" to get the previous session. 
There is also a "Restore Previous Session" button on the default about:home Home page.
You can set the warn prefs on the about:config page to true via the right-click context menu or toggle the value with a double left-click.
* browser.showQuitWarning, see http://blog.zpao.com/post/3174360617/about-that-quit-dialog
* browser.tabs.warnOnClose, see http://kb.mozillazine.org/About%3Aconfig_entries
* browser.warnOnQuit , see http://kb.mozillazine.org/browser.warnOnQuit
* browser.warnOnRestart , see http://kb.mozillazine.org/browser.warnOnRestart
To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website. 
If you see a warning then you can confirm that you want to access that page.

Windows needs to install driver software for your Apple Mobile Device (recovery mode) what do i need to do for this error? i tried all the options and my ipod wont work , need help???

i am using ipod touch 4g

rishiv93 wrote:
i tried all the options...
Did you follow this article about Apple Mobile Device Service? http://support.apple.com/kb/TS1567

How do I get the option to capture image when placing signature for the first time.

According to the help screen for Adobe Reader the first time a signature is placed I should be presented with a dialog box that has the option to import a signature image. But what I get is only the option to drag over an area of the screen to place an image which must be a pdf which requires a paid upgrade to create from an image file.
why is the help out of sync with the program?

Correct I’ve followed as you’ve instructed below, but this is my screen shot:
cid:[email protected]
Note that 3 of the options are missing: Convert PDF to Word or Excel Online, Create PDF, and Add Text or Signature are all missing. Why are these missing and how do I correct this so they can be used?
http://forums.adobe.com/servlet/JiveServlet/showImage/2-4742280-237962/Sign.jpg

Firefox not connecting internet, also not in the safe mode. Have tried most of the options, no success. But I need my favorites... It happened after the update on 29/10/10. How can I restore firefox ?

not connecting to internet? no add-ons visible? safe mode does not function?

Thanks for checking in, BDAQua.
Problem solved.
In the docs that came with my Powerlogix accelerator card, I found this sentence buried:
"If you reset the PRAM, the NVRAM code for OS9 compatibility is cleared, so you will have to boot from the Firmawre Update CD and perform this process again in order to boot in OS9."
The "process" it's referring to is the process of setting up the NVRAM for booting into OS9 from the CD.
Fortunately, I was able to find the disk, and it worked as expected. I can now, once again boot into OS9.
Conclusion: My (unadvised) attempt to load Leopard on this old machine apparently reset the PRAM on the accelerator card and cleared the NVRAM code for OS9 boot. Although I did attempt to reset the NVRAM via Open Firmware, it did not reset it on the accelerator card.
So, thank you BDAQua, for your "Ah yes" . . . that's all I needed to steer me in the right direction.
Gratefully,
tupester

Why doesn't my imovie project for ipod touch go to my computer's iTunes when i hit the option "share with iTunes"? I need iTunes to have the project so I can format it in a video converter. Can anyone help?

I downloaded Imovie to my Ipod touch (I don't have a Mac computer/laptop) so that I can edit a project for school video assignment. I have editted the video, but I can't figure out how to make it go to Itunes. I need it there so that I can put it into a video converter for projection to my class. The problem is, I don't know how to get Itunes to recognize that there is a project made. Imovie (at least the mobile version) has a "share with Itunes" feature, which I found. When I use this feature... nothing happens on the itunes end. Does anyone know why this is and have a solution?

This is what the iMovie Help says:
http://help.apple.com/imovie/iphone/1.3/index.html#kna4501e0f8
Is that the procedure you've been following?
Regards.

How to use the option "Use FTP Proxy" within file adapter for FTP-Proxy

Hello there,
I'm currently dealing with a problem regarding PI 7.40 file adapter and our proxy server. We have installed our pi system within our LAN behind two DMZ's. So we need to use the ftp-proxy function. But when I try to send a file useing this communication channel I'll geht the following error:
If have asked my system colleagues and they told me to use the ftp-proxy string as used in filezilla:
Is there anyway to use this type of ftp-proxy string within the pi configuration:

Hi Harrish,
I have already found this note but I also found the note
1803398 - File Adapter - FTP Proxy type USER@HOST:PORT support
But as I alread tried the solution I think it's not working
regards
Christian

HT4623 Under General in settings, I do not have the option to update software. I need to update my ipad to iOS 5.0. How do I do this without the update software option??

How do I update to 5.0 if I don't have software update in my settings?

If you are under iOS 4.x, you cant update ota (over the air). You need to plug your device to your computer and update it from iTunes.

Is the optional high-resolution 1680 by 1050 needed for HD TV?

Similar Messages

Maybe you are looking for